Used Painting Table for sale (20,557)

Condition: new, number 27 Positionen weight 52 kg condition neu 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Crsdpfsgp Dyujx Acpeh Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs.

Condition: new, table diameter 1600 mm table load 8 t swivelling range 0 - 130 Grad turning speeds 0,05- 0,5 U/min table height adjustment von 1210 bis 2238 mm max. torque on the faceplate 1200 Nm welding current 700 Ampere Credjfv Azhopfx Acpjh including remote control and welding current transmission.

Condition: used, For sale is a complete industrial painting station, equipped with two highly efficient pneumatic double diaphragm pumps of the GRACO Triton® 3:1 350 type. The pumps in the Triton series were specifically developed for demanding finishing applications in the metal and wood industries. Thanks to the 3:1 ratio, they generate a high material output pressure and deliver an extremely even, pulsation-free spray pattern. The stainless steel construction allows for trouble-free use with highly viscous, abrasive media, as well as water- and solvent-based paints. Crjdpez Im I Ssfx Acpsh Technical specifications: • Manufacturer: GRACO (USA) • Pump model: Triton 3:1 350 • Number of pumps in the set: 2 • Pressure ratio: 3:1 • Max. air inlet pressure: 0.6 MPa / 6 bar (88 psi) • Max. material working pressure: 1.8 MPa / 18 bar (260 psi) • Material: Stainless steel (SST) for maximum chemical resistance • Overall dimensions of the station: 152 x 252 x H=132 cm

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Csdpeyq Stvsfx Acpjrh Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 1781.01 € 10 mm B 16 180 mm 250 - 3000 U/min 0,45 kW 400 mm 248 mm 460 mm 30 kg 50 mm 105 - 245 mm 300 x 200 mm 50 mm Continuous/normal drilling performance 10/12 (in E335/ST60) Manual feed Digital speed display Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Codpfx Aoynmz Necperh OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, table diameter 495 mm table load 300 / 150 Kg swivelling range 0 - 90 Grad tilt adjustment: manually/mechanicall manuell turning speeds 0,5 - 3,2 U/min spindle bore 65 mm Torque 375 Nm welding current 500 Ampere connected load frequency 230 Volt Welding turntable with hollow shaft 300kg capacity Cedpel R Nnvjfx Acpsrh With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal

Condition: used, Year of construction: 1985, chucking diameter 315 mm Credpfxez Dky Dj Acpoh table load 300 Kg turning speeds 0,1 - 4,0 U/min connected load frequency 220 V bore diameter 63 mm weight 0,09 t Dimensions (LxWxH) 0,8 x 0,6 x 1,2 m Welding turntable incl. - 315 mm chuck - 3-axis torch holder - Cutting torch - Machine base frame

Condition: new, table length 1200 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,261 t dimensions 1,2 x 1,2 x 0,85 m Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. Codsftd T Sepfx Acpsrh The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.

Condition: new, clamping range of chuck 10 - 200 mm height 67,5 mm daylight 65 mm external diameter Futter 200 mm external diameter Spannhebel 360 mm weight 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. Crodpfxjfv Awlo Acpjh • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, clamping range of chuck 80 - 280 mm height 67,5 mm daylight 100 mm external diameter Futter 300 mm external diameter Spannhebel 480 mm weight 13 kg Credpfofv Awpjx Acpsh Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, table length 1590 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Cedoh Dqb Dopfx Acporh Pallet truck is not included in the scope of delivery

Condition: new, table length 430 mm Csdpsupw T Rjfx Acporh table width 240 mm x-travel 225 mm y-travel 160 mm table height 160 mm T-slots 12 mm weight 45 kg dimensions 0,6 x 0,45 x 0,2 mm Cross table with turntable

Condition: new, number 93 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 93-piece set, 28mm system Includes tool trolley Material: Burnished high-quality steel Cedpoyv I Eaofx Acpjrh Scope of delivery: see images

Condition: new, number 102 Positionen weight 320 kg condition neu 28 mm dimensions 1,0 x 0,6 x 0,85 m Special 102-piece set, 28mm system Includes tool trolley Csdpfsyv I Hdjx Acporh Material: Burnished high-quality steel Scope of delivery: see images

Condition: new, table length 2000 mm Cedpfx Asyv I Hwjcpsrh table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Condition: new, table length 1200 mm table width 800 mm table height 980 mm weight of the machine ca. 0.95 t Cjdpfxsyv I Inj Acpsrh Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 1,5 t dimensions 3,0 x 1,5 x 0,9 m Welding table with accessories - Table size: 3000x1500x200 mm - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm Credpfxjxwzd Ne Acpoh - Surface bores 100x100 mm grid - Corners, edges and bores chamfered at 45° - Side wall height 200 mm - Side wall bores in diagonal grid - Construction reinforced with ribs Accessories: - 6x 280610.N screw clamp - 12x 280511 quick-release bolts - 8x 280420.N universal stop - 2x 280110.N stop and clamping angle - 2x 280162.N stop and clamping angle - 1x 283999 care set

Condition: used, Year of construction: 1992, table diameter 600 mm table load 250 Kg swivelling range 0 - 135 Grad Crsdpfx Acsygxzrjpeh turning speeds 0,03 - 2,0 U/min connected load frequency 400 V weight 0,4 t Dimensions (LxWxH) 1,1 x 0,9 x 1,0 m Welding turntable including: - Foot switch - Wired remote control - 315mm chuck

Condition: new, table length 1500 mm table width 1500 mm table height 850 mm Vertikal stroke 50 mm weight of the machine ca. 0,8 t dimensions 1,5 x 1,5 x 0,9 m Welding table "SIGMUND Professional 750 + Plasma-nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5-27mm. Csdpjmhm Aujfx Acperh The holes have a diameter of 28mm. Hole arrangement in 100 mm grid on the table top parallel hole arrangement in 50 mm grid on the sides. Incl. Foot basic equipment. Pictured accessories optional. Price indication plus packaging and transport.

Condition: as good as new (ex-display), Receiving table for LT series machines Length: 1.8 m Credpfszn Iu Nox Acpoh Height: 765 cm Width: 638 cm

Condition: as good as new (ex-display), Receiving table for LT series machines, with side sheet metal panel. Length: 1.8 m, with a 2.5 m sheet metal panel. Width: 627 cm. Crodpfxozn It Es Acpoh Height: 754 cm.

Condition: excellent (used), Year of construction: 2015, Shape float glass cutting line LISEC baseCUT-37/26 + BASE TABLE BREAK With low-e grinding Year of production: 2015 Maximum glass size: 3700 x 2600 mm Cedpoxlq Nwefx Acpsrh "4 in 1" - with tilting, cutting, breaking and low-e grinding Includes 2 pcs. free-fall racks LISEC LBS-37/26FF Glass thickness: 2 - 19 mm Glass cutting speed: up to 140 m/min In very good and clean condition Good working order, tested Good working order, tested As is See video Availability immediate

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Crjdpfx Aoxa Hx Rocpsh Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Year of construction: 2019, condition: good (used), Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system from 2019. The automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line consists of, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust gas cleaning system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical Data & Scope of Supply: Crsdpfezka Sfjx Acpsh Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of construction main system: 2019 Previous operation: 3-shift operation (condition corresponds to age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of construction 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust gas cleaning system (VeniaKab / RNV) Condition notes: Control technology: According to the factory maintenance department, it is state-of-the-art. Electrical & mechanical: Mostly in a condition appropriate to its age or good condition. Cyber security data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Credpfszhm Dpjx Acpjh Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg