Used Photoelectric Sensor for sale (5,993)

Condition: not inspected (used), functionality: unexamined, Light curtain SICK FGSS300-1 Safety Category: Type 4 Gkjdpfx Alozkazge Uec 1x Transmitter 1x Receiver Supply voltage: 24V +/- 20% Power consumption: 11 W Protection class: IP 65 Protected field width: 6 m Protected field height: 300 mm Response time: 15 ms 1x Control unit LCUX1-400 Requirement level: Type 4 Power consumption: 6 W Response time: 15 ms

Condition: used, Technical data: Gkjdpfjzrxwiox Al Uoc - Condition: As new - Manufacturer’s No.: UVF2D5003

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Godpfx Aez Ekb Dsl Ujkc Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning diameter: 1,270 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, spindle motor power: 30,000 W, rotational speed (min.): 5 rpm, rotational speed (max.): 6,000 rpm, total height: 5,000 mm, total length: 8,000 mm, workpiece weight (max.): 6,000 kg, torque: 190 Nm, overall weight: 22,000 kg, spindle nose: HSK100, Equipment: documentation/manual, rotational speed infinitely variable, The spindle was completely overhauled in 2025! The invoice for the spindle overhaul is attached. TECHNICAL DETAILS General Information Manufacturer: Konrad Seidler Model: MINIMAX 1800 Year of Manufacture: 2013 Machine Type: CNC rotary table turning, boring, and milling center Operating Mode: Single-shift operation Machine Weight: approx. 22,000 kg Control and Drive Control System: Siemens 840D SL Drives: SINAMICS 120 Turning Range and Rotary Table Turning Diameter: 500–1,270 mm Rotary Table Load Capacity: 6,000 kg Rotary Table Speed: 5–500 rpm Boring and Milling Spindle Boring/Milling Spindle Power: 30 kW Torque: 190 Nm Boring/Milling Spindle Speed: 2–2,500 rpm Boring/Milling Spindle Speed: max. 6,000 rpm Tool Holder: HSK100 Tool Changer Tool Changer: 16 tools Coolant System Coolant Pressure: 6 bar High-Pressure Coolant Pressure: 30 bar Chip Conveyor Chip Conveyor: Cross conveyor, discharging to the left Discharge Height: 1,200 mm Machine Enclosure Enclosure: Double sliding door Work Area: Walk-in Spindle Overhaul Year of Spindle General Overhaul: 2025 Investment Costs: 36.5 thousand EUR EQUIPMENT Chip Conveyor Walk-in Work Area High-Pressure Coolant System Tool Changer with 16 Positions HSK100 Tool Holder Double Sliding Door Operating Manuals Installation Documents Wiring Diagrams, partially available Documentation of Machine Components Documents for the Control System Documents for the Chip Conveyor Other Original Documents from Commissioning Documents for the Spindle Overhaul Test Report of the Spindle Overhaul Godpfx Alez Hmhie Uskc Extensively Overhauled Capellini High-Performance Spindle Renewed Precision Bearings Renewed HSK100 Clamping System Renewed Balluff Sensors Refurbished Spindle Shaft Renewed Wear Parts Finely Balanced Spindle according to ISO 1940 System-Balanced Spindle Assembly Chuck and Jaws

Condition: like new (used), Year of construction: 2022, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 20220807 01320A, type of input current: AC, total length: 6,000 mm, total height: 1,850 mm, total width: 1,100 mm, input voltage: 220,380 V, overall weight: 550 kg, input current: 1,215 A, Equipment: clamp, High-Speed Automatic Horizontal Flow Wrapper (Pillow Pack Machine) – Ultra-Low Usage Heavy-duty automatic horizontal flow packaging machine manufactured by Qingdao Bostar Packing Machinery Co., Ltd. Used for a very short period with under 450 total working hours. The machine is in excellent, like-new operational condition. Gjdpjz Ihbaofx Al Uokc Key Technical Specifications & Features: • Condition: Used – Like New (< 450 operating hours) • Gas Flush Option: Equipped with gas flushing capabilities (e.g., Nitrogen injection) for Modified Atmosphere Packaging (MAP) to extend product shelf life. • Construction: Stainless steel frame, machine housing, contact parts, and long product infeed conveyor • Automation & Controls: Integrated Panasonic FP-XH C40T PLC automation unit • Motion Drive: 3-Axis Panasonic Servo Motor System for precise, independent control of infeed, film feeding, and sealing jaw cross-cuts • Infeed & Film Handling: Extended stainless steel belt conveyor with pushers, dual film roll holders, photoelectric eye-mark registration sensor for precise print alignment, and adjustable bag-forming box • Sealing & Cutting: Rotary horizontal sealing jaws with integrated heating elements, rotary brush discharge belt, and pneumatic pressure regulation • HMI Interface: Touchscreen control panel mounted on a swivel arm for easy recipe settings and diagnostics Ideal Applications: Pillow-pack packaging of bakery items (biscuits, wafers, croissants, cakes), confectionery, energy bars, snacks, trays, and various non-food/industrial products. Location: Amman, Jordan Terms: EXW

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: HELIX 30, Current Status & Availability: The stretch wrapping machine is fully operational and is currently in daily use. Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47/2026. System Description: - Stable 4-column construction - Rotating arm with film carriage - Top sheet applicator (integrated) - Turntable for pallet rotation - Automatic pallet height detection using a photoelectric sensor - Variable adjustable number of top and bottom wraps - Variable adjustable wrapping program - Blowing unit: this unit blows air onto the beginning of the film from below and wraps it in. - Pre-stretch system P.G.S.A., see section 1.5 1.5.1 For reducing film consumption and increasing load securing - With this pre-stretch system, the tension of the film on the load can be adjusted via the adjustable dancer roll. - PLC control system Siemens S7-200 with a free-standing control cabinet - Machine operation and information texts via operator display - Triple indicator lights to display the operating states - Machine equipped with Robopac standard components - Electrical installation according to protection class IP 54 - Documentation - Machine complies with CE and EMC standards Gjdpfxjy Sziqs Al Uokc Safety light barriers at the infeed and outfeed (standard Robopac Sistemi). In accordance with the EC directives for machinery (EC Directive 89/392), the system receives a CE marking and is supplied with a declaration of conformity. - Machine equipped with European safety standards with EMC (89/336/EEC) and EU standards in excerpts EN 292, EN 294, EN 811 EN 60204 - Machine will be completely assembled and tested before delivery - Packaging suitable for transport by truck (machine on a wooden pallet covered with film)

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 00073068, roll pitch: 62 mm, total width: 692 mm, total height: 800 mm, total length: 25,000 mm, conveying length: 25,000 mm, working width: 600 mm, frame height: 800 mm, track width: 600 mm, For sale is a professional, motor-driven roller conveyor manufactured by AMI Förder- und Lagertechnik, built in 2021. Technical specifications: • Overall length: 25,000 mm • Conveyor height: 800 mm • Conveyor width: 600 mm • Color: RAL 5010 Blue • Without side guides • Includes discharge section of 3,000 mm • With roller stop • Two-sided emergency stop pull cords Photoelectric sensor control: • 1 photoelectric sensor at the end of the powered section (after 22,000 mm / beginning of discharge section) → stops the conveyor system when occupied • 1 photoelectric sensor at the end of the discharge section (mounted under the discharge section, facing upwards, fan-shaped beam) → starts the conveyor system when released (adjustable response time) Process: Boxes are placed along the entire powered section and transported to the pick-up position. The control system prevents the discharge section from becoming overcrowded and automatically restarts when a box is removed. Electrical equipment (complete scope of supply): • 1 motor drive controller • 1 control cabinet with main operating elements on the door • 1 Siemens PLC controller • 2 photoelectric sensors • 2 emergency stop pull cords Gkodpfx Aljz Rv S Hs Ujc Sales information: • Delivery and collection possible by arrangement The system was built in 2021 and features a complete, professional control system (Siemens PLC + photoelectric sensor control). Ideal for the transport of boxes/containers in logistics, production, or shipping.

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of the workpiece 1100 mm max. height of the workpiece 170 mm 2 units: – from above: rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of the units 15 kW – from below: 2 rubber rollers, slip conveyor belt 2 rubber rollers, slip potentiometer for grinding thickness belt blowing pneumatic belt oscillation with photoelectric sensors electric table lifting + manual (for precise adjustment) 2 types of feed speed 0.3 kW with pneumatic brake operating pressure 6-8 bar Gedpfx Aezrnwlel Uokc diameter of the dust extraction nozzle 2x140 mm overall dimensions L/W/H 1840x1650x2000 mm weight 1160 kg – unpainted – made in Italy – automatic shoe – 2 units – potentiometer for grinding thickness – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11372 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Condition: good (used), Inductive sensor, electronic sensor, proximity switch, infrared sensor, IR sensor, web edge sensor, photoelectric sensor -Manufacturer: Fife, infrared sensor -Type: SE-42R M280746 -Number: 7 sensors available -Price: per piece Gkodpfx Aljxv R Iuj Uec -Dimensions: 140/100/H25 mm -Weight: 0.1 kg/pc.

Condition: used, Year of construction: 2022, Equipment: photoelectric sensor for product detection, floor stand with printhead holder, status display, 3x 1l solvent, 1x 1l ink, cleaning unit, table, character height: 2-10mm, max. speed: 1,148characters/s, voltage: 100-120VAC/200-240VAC, phases: 1, frequency: 50/60Hz, current consumption: 1.2/0.6A, length: 400mm, width: 320mm, height: 527mm, weight: 27kg, operating hours: 155h, an on-site inspection is possible. Gjdpfxoz Egd Uo Al Uskc

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. Gsdpfx Aeywgaxel Uekc The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) Gkodpsw H Aw Sofx Al Uoc 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: WT 1104, total height: 3,421 mm, total width: 4,704 mm, total length: 9,550 mm, load capacity: 200 kg, construction height: 3,421 mm, Vacuum Turning Portal for Panels The turning unit offers two different "automatic" operating modes: I. Component is conveyed without rotation The component is only shifted laterally, aligned to the reference edge (zero line) of the machining center, and then fed further to the CNC machining center (BAZ). II. Component is conveyed with rotation The component is shifted laterally and rotated along its longitudinal axis before being fed further to the CNC machining center. Each function can also be manually controlled in "manual" mode. Gedpjyta R Usfx Al Uskc SPECIFICATIONS: Max. panel dimensions: LWH: 8000mm x 2500mm x 100mm Max. weight: 200kg Min. panel dimensions: LWH: 1500mm x 1500mm x 12mm The turning portal is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the panels. The panels are always lifted via suction, then either moved horizontally to the zero line of the machining center or additionally rotated 180° en route before being delivered to the reference edge. The rotational movement is monitored via absolute encoders; the lateral positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm with roller diameter 108 mm, is fitted with material-friendly rubber rings and is driven by a SEW gear motor. Control of the roller table is via frequency inverter, adjustable speed up to 45 m/min. GENERAL INFORMATION: The entire area is enclosed by fencing; the longitudinal side of the system is secured by two sliding doors, which are safety-monitored. An operator touchpanel (12") is integrated into the fence area. The installed PLC (Siemens S7-1500) is programmed with three modes: • Automatic operation • Manual operation • Maintenance operation Input signals, loading side: – Start roller table – Rotate yes/no – EMERGENCY STOP complete system Input signals, unloading side: – Start roller table – EMERGENCY STOP complete system System output signals: – EMERGENCY STOP complete system – Panel infeed confirmed

Condition: used, Year of construction: 2014, functionality: fully functional, -KOM 3091- Gkedjwl U Sxopfx Al Ujc Offered here are Leuze photoelectric sensors. The photoelectric sensors are in good condition. They were previously used in a set of two as safety sensors. A total of six Leuze photoelectric sensors of this type are available.

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive Gkedozxy Szepfx Al Uoc • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Godpfeyx Uy Asx Al Uokc Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 2018, Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data - Manufacturer: Krones - Model: Linatronic M - Machine type: empty bottle inspector - Year of manufacture: 2018 - Application: inspection of empty bottles prior to filling; neck ring detection for returnable PET containers included - Inspection modules: base inspection, sealing surface inspection, screw thread inspection (cone optics), sidewall inspection - Sidewall inspection: 2 modules with 4 mirror assemblies and 4 cameras, two views per camera at 45° - Residual liquid and caustic detection: high frequency and infrared - Additional detection: polarising transparent films at container base and sidewall, glass fragments at the container base, scuffing via sidewall camera - Foreign bottle detection at the infeed: container height, contour and colour via camera - Rejection: 3 x Ecopush - foreign containers at the infeed, dirty containers and damaged containers at the discharge - Control: Krones iPanel CD operator terminal, prepared for data connection to a single-station PC (Datalyser) - Test bottle programme with 2D code - Conveyor height: 1,200 mm, adjustment range 1,155 - 1,315 mm - Minimum required room height: 2,810 mm - Overall dimensions: approx. 6,700 x 1,300 x H 2,800 mm - Direction of operation: right-left machine - Power supply: 400 / 230 V, 3/N/PE, 50 Hz, 6 A full load current, 20 A pre-fuse; auxiliary supply 230 V, 1/N/PE, 5 A - Standards: IEC 61439-1 / IEC 60204-1, CE marked - Machine base and housing: stainless steel (AISI 304 equivalent), clean design Equipment - DualFlash neck finish lighting, separate inspection of outer and inner sealing surface - Combined thread inspection via the sidewall mirror assembly - Fallen container detection in front of the machine (photoelectric sensors with infeed pusher) - Base blow-off unit with clocked air nozzle for foam and lubricant residues - Container blower at the infeed, conveyor dead plate (3-fold) - Servo-driven collection module for rejected containers at the discharge - Festo pneumatic system with maintenance unit, food-grade lubricants - Emergency mode: passage operation without inspection - OEM machine data sheet and dimension drawing Condition Used, technically complete. The machine is still installed and under power at its production site; the photographs show it in the installed state. Availability Gedszy Ud Iepfx Al Uokc Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Gedpfx Alsyf Du Ue Uskc Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Clamping device • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, FRIULMAC IDRAMAT TC/5WS+1/2 2.5 – Throughfeed CNC Machining Center for Furniture Components Year of manufacture: 2019 Condition: Very good Availability: By arrangement Inspection: By arrangement Double-sided throughfeed CNC machining center FRIULMAC IDRAMAT TC/5WS+1/2 2.5, ideal for finishing solid wood furniture components. The machine integrates several work processes in a single production line: • Crosscutting & trimming • End drilling • Vertical and horizontal drilling • CNC milling • Glue application & injection • Dowel insertion Production output: 14–16 parts/minute Technical data • Material: Solid wood • Workpiece length: 200–2500 mm • Workpiece width: 30–200 mm • Workpiece thickness: 14–48 mm • Working height: 945 mm (0/+20 mm) • Voltage: 400 V / 50 Hz • Control system: CNC CNI with touchscreen Machine configuration 1. Throughfeed machining center IDRAMAT TC • Heavy-duty steel construction • Automatic width adjustment (movable shoulder) • Vertical magazine with photoelectric sensor • Servo-driven feed shoes • Upper pressure unit with rubber belts • Pneumatic workpiece clamping Working stations 1st station – Scoring/Trimming B 2/B 8 • 2× motor, 3 kW each • 7,600 rpm • Max. saw blade Ø 125 + 180 mm 2nd station – End drilling M • Motor 3 kW • 5,000 rpm • Drilling stroke 25–80 mm • Electric cylinder with brushless motor 3rd station – CNC vertical milling J 3D • Electric motor 8 kW • 9,000–12,000 rpm • X axis automatic, Y/Z manual • HSK63C tool mount 4th station – CNC vertical milling J 3D (second unit) • Identical to 3rd station 5A station – Glue injection R 4 • Electronically adjustable glue volume • 2+2 glue injectors • Tilt ±30° 5B station – Dowel unit R 5 • Vibratory feeder • Dowel lengths 30 and 60 mm Gsdpfeyk Empsx Al Uokc • Minimum spacing 16 mm • Pneumatic stroke 80 mm Outfeed area – Drilling bridge PO 2/PN 2 • Combined vertical and horizontal drilling operations • 3× vertical drilling units • 3× horizontal drilling units • Swiveling table • Automatic workpiece transfer • Chip conveyor with auger Equipment • Soundproof enclosure • Safety guard • Workpiece return to operator • Vertical hopper feeder • Complete documentation: o Operating manual: Slovak o Touch panel/labels: Slovak o Electrical/pneumatic diagrams: English The photos show examples of products that can be manufactured with this machine. Price: €290,000 excl. VAT, shipping, and disassembly.

Condition: excellent (used), Catalog number 7976 TECHNICAL DATA - max. width of workpiece: 1100mm - max. height of workpiece: 160mm 2 processing units: 1) grooved rubber roller for calibration 2) pneumatic shoe + 2 metal rollers – from above: - 2 metal rollers, sliding - pressure roller - processing unit - 2 metal rollers, sliding - processing unit - 2 metal rollers, sliding - cleaning brush – from below: - 2 rubber rollers, sliding - conveyor belt - pneumatic belt oscillation controlled by photoelectric sensors - electric table lifting - 2 types of feed speed - working pressure 8-10 bar - diameter of dust extraction nozzle 2x200mm - total power 30kW - overall dimensions (length/width/height) 2230x2020x2050mm - weight approximately 3000kg Gjdpfx Ajztw H Eol Uekc ADVANTAGES – made in Germany – 2 processing units – used machine, very good condition Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 2017, condition: ready for operation (used), Offered for sale is an MR Wickeltechnik core cutting machine. Max. uncut core length: 2000mm, min./max. core inner diameter: 76.2mm/152.4mm, max. core outer diameter: 210mm, core wall thickness range: 3mm-18mm, automatic cutting width range: 8mm-600mm, manual cutting width: 2930mm, cutting tolerance: +/-0.2mm, max. core speed: 427rpm, max. feed speed: 200mm/s, cutting capacity: 18cuts/min at 76mm core inner diameter, 7mm wall thickness and 50mm cutting length, control: Siemens Simatic. Machine weight: 700kg. Equipped with fully automatic cutting cycle, manual core feeding, automatic core length detection by means of a photoelectric sensor. Documentation available. An on-site inspection is possible. Gksdpfx Ajztzq Ijl Ujc

Year of construction: 2006, condition: used, 3-axis machining center with automatic 8-station tool changer for aluminum or PVC profiles Max. travel stroke X-axis: 7200 mm Max. Travel of Y-axis: 400 mm Max. travel range Z-axis: 380 mm Control E 500 Speed continuously adjustable up to 6,000 rpm handheld control unit minimum quantity spraying 3 angle heads Profile length measurement at the head Gkedpfozx D Sfox Al Uoc Tensioner detection and automatic displacement 8 pneumatic material clamps Oscillating operation possible Photoelectric sensors

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210110, warranty duration: 12 months, compressed air connection: 6 bar, year of last overhaul: 2026, F2008 AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 800 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 720 cartons/min (depending on carton length and quality) - Carton magazine: 110 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm Hg - Mains voltage: 400V, 3-phase, N, PE - 50/60 Hz - Protection rating: IP 54 - Compressed air: 6 bar - Air consumption: 22 nl - Operating environment: +5°C - max. +35°C - Working height: 650 mm, adjustable by +30 mm - Weight: 490 kg - Dimensions of erector including sealer in mm (l x w x h): 2,636 x 2,164 x 2,008 - CE safety protection The system includes a GEM B50 carton closer. GEM B50 CARTON CLOSER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON SIZE CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ Godpjz Dwilsfx Al Uskc - Width: min. 100 mm - max. 520 mm - Height: min. 100 mm - max. 520 mm TECHNICAL DATA: - Drive and guide belts: vertical - Carton size adjustment: manual - Closing unit: bottom - Standard version: T22 / T23 - Adhesive tape width: from 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Core of adhesive tape roll: 76 mm - Mains voltage: 400V, 3-phase, N, PE - 50/60 Hz - Consumption: 0.25 kW - Protection rating: IP 54 - Operating environment: +5°C - max. +35°C - Transport speed: 22 m/min - Average production: 1000 cartons/hour - Working height: 650 mm - Weight: 85 kg - Dimensions of erector including sealer in mm (l x w x h): 2,636 x 2,164 x 2,008 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may include optional features that incur additional costs.

Year of construction: 2003, operating hours: 0 h, condition: good (used), machine/vehicle number: 00278, ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) Gksdpfx Alofh Slps Uec 1200 kg Amount in stock/pe stoc 1 pc/buc 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Standard equipment has: Photoelectric cell, automatic cleaning system, 100% full sensor with machine stop, special roller cardboard / plastic / crate, system humidification, loading hopper on the front, management by PLC. Can work in cold condition until (-30 ° C), it has an antifreeze tank. Price/Pret Euro 2.850 + TVA Ex Works Loaded: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2019, sheet width 6080 mm Gkodozvq Etspfx Al Ujc plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device