Used Capacitive Sensor for sale (5,948)

Condition: good (used), Capacitive sensor, electronic sensor Knjdpfob A E U Nex Adljc -Manufacturer: IFM -Product Type: KD-3050-BPOG -Quantity: 4 available -Price: per piece -Weight: 0.5 kg

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: Knsdsv Sm Ruspfx Adljc • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials. Knodpfoz R Auuex Adljc

Condition: ready for operation (used), Year of construction: 2016, laser power: 2,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, table load: 920 kg, number of axes: 3, This 3-axis AMADA LCG 3015 AJ fiber laser cutting machine was manufactured in 2016. It features a maximum continuous laser power of 2,000 Watts and an impressive X-axis travel of 3,070 mm. The machine includes an automatic palletizing system and a lightweight HS cutting head with advanced safety measures. If you are looking to get high-quality cutting capabilities, consider the AMADA LCG 3015 AJ machine we have for sale. Contact us for further details. • CNC control: AMADA AMNC-F with 15" touchscreen, 1 MB memory Kedpfx Aez S Nfcodlenc • Control features: Auto-diagnostic system, laser power feedback control, USB/Ethernet ports, CD drive, LAN interface, cutting data library database, part/sheet counting, logical search function, production time measurement • Max material thickness: • Mild steel (ST 1203): 10 mm • Stainless steel: 10 mm • Aluminum (AlMg3): 8 mm • Copper: 4 mm • Brass: 5 mm • Cutting speed: 0–120 m/min • Machine weight (with interchangeable table): 8,200 kg • Cutting head: Lightweight HS head with capacitive sensor for constant distance, rapid-change lens/nozzle system, 5 protective safety measures • NC focusing function: Automatic focus adjustment via CNC and optics for varying materials/thicknesses • Positioning diode laser: Assists in approaching positions and working with residual sheets/trimmings Additional equipment • Pallet changer: Automatic palletizing system with pneumatic thin-sheet clamping and roller table for easy positioning • Extraction and chiller: Multi-chamber extraction with self-cleaning filters; closed-loop cooling unit for laser, focusing mirror, lens, and drives

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system Ksdjz Rl Uqspfx Adljnc - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. More information: ? Luis Lucena ? Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024, with only 336 operating hours. The machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a maximum horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Kedsytlk Hepfx Adljnc Technical data: * Manufacturer/Model: Merlo Roto 50.21 * Machine type: Rotating telehandler * Year of manufacture: 2024 * Operating hours: 336 h * Engine power: 55 kW * Emission stage: EU Stage V * Maximum load capacity: 4,950 kg * Maximum lifting height: 21,000 mm * Maximum horizontal reach: 17,900 mm * Rotation range of the upper carriage: 600°, electronically limited * Transport weight: 15,800 kg * Transport length: 6,830 mm * Transport width: 2,430 mm * Transport height: 3,120 mm * Fuel tank capacity: 150 liters * Quick coupler: ZM2 * Permanent all-wheel drive * Three steering modes * Four independently controlled outriggers * MOT: New * Vehicle number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information about the machine and load * Stage preparation * Remote control * CDC sensor for automatic attachment recognition * Hydraulic quick-change system * Joystick with capacitive release * Direction switch on the joystick * Automatic engine speed increase * ROPS/FOPS cabin * 4.3 m² large glass area * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Errors, changes, and prior sale are subject to change.

Condition: used, Year of construction: 2024, operating hours: 336 h, Equipment: all wheel drive, Internal Vehicle No.: G300427 Available immediately at our yard in Kaufungen. For more information, please contact: * Luis Lucena * Viktoria Sologubova Merlo Roto 50.21 Rotating Telehandler | 21 m Lifting Height | 4,950 kg Load Capacity | 336 Hours Kedpfx Aeyrv S Sedlonc For sale is a used Merlo Roto 50.21 rotating telehandler, manufactured in 2024 with only 336 operating hours. This machine combines a maximum lifting height of 21,000 mm with a load capacity of 4,950 kg and a horizontal reach of up to 17,900 mm. The upper carriage can rotate up to 600°. Permanent all-wheel drive, three steering modes, four independently controlled outriggers, and the adaptive stability control system enable versatile and safe operation. Technical specifications: * Manufacturer/Model: Merlo Roto 50.21 * Machine Type: Rotating Telehandler * Year of Manufacture: 2024 * Operating Hours: 336 hours * Engine Power: 55 kW * Emission Level: EU Stage V * Maximum Load Capacity: 4,950 kg * Maximum Lifting Height: 21,000 mm * Maximum Horizontal Reach: 17,900 mm * Rotation Range of the Upper Carriage: 600°, electronically limited * Transport Weight: 15,800 kg * Transport Length: 6,830 mm * Transport Width: 2,430 mm * Transport Height: 3,120 mm * Fuel Tank Capacity: 150 liters * Quick Coupler: ZM2 * Permanent All-Wheel Drive * Three Steering Modes * Four Independently Controllable Outriggers * Inspection: New * Vehicle Number: G300427 * Condition: Used Equipment: * Adaptive Stability Control System (ASCS) * 10.1-inch digital display with real-time information on the machine and load * Stage Preparation * Radio Remote Control * CDC sensor for automatic attachment recognition * Hydraulic quick-release mechanism * Joystick with capacitive activation * Direction switch on the joystick * Automatic increase in engine speed * ROPS/FOPS cabin * 4.3 m² glass surface * Permanent all-wheel drive * Three steering modes * Four individually controllable outriggers * ecoRent version Inspection and functional testing possible after prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale.

Condition: ready for operation (used), Year of construction: 2024, laser power: 20,000 W, travel distance X-axis: 9,050 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 120 mm, number of axes: 6, This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details. • Laser source: RAYCUS Fiber Laser • Working range: • BEVEL working area: 8,500 × 2,500 mm • Dynamics: • Maximum speed: 140 m/min • Maximum acceleration: 2.5 G • Precision: • Mechanical accuracy: ±0.05 mm / 500 mm • Position repeatability: ±0.02 mm • Cutting head / axes: • BEVEL autofocus cutting head • B/C-axis rotation range: ±45° • Non-contact capacitive sensor • Automatic focus adjustment • Maximum assist-gas pressure: 20 bar • Automatic nozzle cleaning and capacitive sensor calibration • Control: • CNC: D.Electron Florenz Z32 • Machine supervision: Smart Manager 6 • Industrial PC with Windows 11 • 22" Full HD touchscreen • Connectivity: Ethernet, USB 3.0, Wi‑Fi • Industry 4.0 / MES integration capability • Installation requirements: • Power supply: 400 V • Recommended compressed-air pressure: 10 bar • Assist gases: Oxygen / Nitrogen / Air Knedoz I Rlhjpfx Adlec Additional equipment • Automatic LIFT pallet changer • Double pallet system • Chiller • Compressed-air filter • Internal monitoring camera • Standard fume extraction system • Automatic assist-gas change • Automatic sheet recognition • Lantek post processor for BEVEL cutting • Full-table protective enclosure

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 22,500 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Rofin, laser source model: DC 025, laser power: 2,500 W, pipe diameter (max.): 140 mm, pipe length (max.): 8,500 mm, table length: 8,500 mm, working length: 8,500 mm, travel distance X-axis: 8,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 95 mm, workpiece weight (max.): 4,000 kg, type of input current: three-phase, compressed air connection: 6 bar, overall weight: 10,000 kg, total length: 17,536 mm, total width: 4,604 mm, total height: 2,237 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, 2006 BLM Adige LT712D Tube Laser Machine Manufacturer: BLM Adige Machine Model: LT712D Laser: Rofin Sinar series DC K 2.5kW Laser source. Year: 2006 Infeed: 8,500mm Outfeed: 6,500mm Condition: Very Good Hours: 22,500hrs Availablility: Immediately Knedpfxjx Ddags Adloc This 2006 BLM Adige LT712D is a high-performance CNC tube laser cutting system designed for precision processing of mild steel, stainless steel, and aluminium tube profiles. Known for its reliability and accuracy, the LT712D is one of the most capable mid-range tube laser platforms, delivering clean, repeatable cuts with full automation from loading to unloading. With only 22,500 operating hours, this machine is in very good condition and has been maintained to OEM standards. It offers exceptional value for fabrication companies, structural steel specialists, subcontractors and manufacturers looking for a high-precision tube laser with proven durability. ⭐ Key Machine Specifications Working Capacity & Tube Dimensions Minimum tube length: 3,200 mm Maximum tube length: 8,500 mm Round tube diameter: Ø12 – Ø140 mm Square tube: 12 – 120 mm side dimension Rectangular / flat-oval: up to 170 mm circumscribed circle, min. side 10 mm, max. side 140–150 mm Max bar weight: Linear: 15 kg/m Total (L=8500 loader): 130 kg Machine Dimensions & Weight System footprint (L=8500 version): 17,536 × 4,604 × 2,237 mm (complete system) 13,595 × 4,604 × 2,237 mm (machine body) Machine weight: approx.10000 daN (= 10 tonnes) Laser, CNC & Automation CNC Control: Siemens Sinumerik 840D Laser Source: Rofin DC-K Series Cutting Head: Autofocus head with capacitance sensor + collision protection Working Axes: X travel: 8,500 mm Y travel: 400 mm Z travel: 95 mm A-axis: spindle rotation A1-axis: steady rest rotation V-axis: Bar support on the machining line (90mm) W-axis: Unload piece support (85mm) X1-axis: steady rest travel (610 mm) Loader & Unloader Automatic bundle loader with alignment, measuring & singularisation system Scimitar-style tube transfer system for smooth transition to machining line CNC-controlled tube support system with 5 active support groups Intelligent cut-piece unloader with conveyor belt for short parts up to 300 mm Extraction & Cooling Systems Fume extraction: 2,000 m³/hr with high-efficiency filtration system Cooling: MTA TAE 121 chiller, 260-litre cooling circuit reserve Hydraulics: 25-litre tank, 25 L/min pump, 70 bar system pressure 🟢 Condition & Availability Year: 2006 Hours: 22,500 (very low for a tube laser) Condition: Very Good – well maintained, clean, fully operational Availability: February–March 2026 Includes: Full machine, loader, unloader, chiller, documentation supplied. Why the LT712D Is a Top Choice The BLM Adige LT series is widely regarded as the benchmark for tube laser systems. This LT712D stands out thanks to: ✔ Exceptional tube cutting accuracy ✔ Reliable automatic loading & unloading ✔ High-quality Rofin laser source ✔ Full CNC control of every movement ✔ Capability to handle a wide range of profiles ✔ Heavy-duty industrial build quality (10 tonnes of rigidity) For fabricators looking to increase productivity, quality, and automation, the LT712D is an ideal investment. Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Electric hot air steamer with direct steam   Hot air steamer – operating principle Cooking mode Ksdpfxev Hztao Adlsnc AC (Automatic Cooking): Automatic cooking system for recipes from all over the world, featuring a photo presenting the dish. Manual cooking with three cooking modes: convection from 30°C to 300°C, steam cooking from 30°C to 130°C, and a combination of hot air and steam from 30°C to 300°C. Programmable operating mode: Cooking processes can be programmed and stored in an automatic sequence (up to 15 cycles). Each program can be assigned a unique name, as well as images and information about the recipe. Clima® - Automatic measuring and control system for the percentage of humidity in the cooking chamber. Fast-Dry® - System for rapid dehumidification of the cooking chamber.   Operating principle Configurable display as needed, with the most frequently used programs brought to the foreground. Automatic start of the cooking process (AC) with "One Touch". Arrangement of recipes in folders with a preview and a unique name for each folder. Intelligent recognition of recipes in folders with subfolders. Capacitive 7" LCD TFT color screen with high resolution and touchscreen function. Scroll wheel plus with scroll function and push function to confirm the selection made.   Equipment for control and operation Autoreverse function (automatic reversal of the fan's direction of rotation) for uniform cooking. Delta T system for the parallel control of the temperature in the cooking chamber and inside the product. Automatic regulation of steam condensation. Easy access to programmable user parameters to make personal adjustments on the device via the menu. Delayed start of the cooking process, programmable. Option to choose from up to 6 ventilation speeds, with the heating output automatically reduced for the first 3 speeds. For special cooking processes, the speed can be changed alternately. The temperature inside the product is monitored via a four-point core temperature sensor. External interface for easy and quick connection of the core temperature sensor to the cooking chamber. USB port for downloading HACCP data, updating software and downloading and uploading cooking programs. Preset system to optimize energy consumption (optional). Service program: checks the functions - control board and displays the core temperature sensor - operating hour counter of the main functions for scheduled maintenance. Self-diagnosis and check of the device's functionality before each use, with written and audible indication of any abnormalities. LED lighting of the chamber. Ecospeed - Depending on the quantity and type of product, the device controls and optimizes energy consumption, while always maintaining the correct cooking temperature and avoiding fluctuations. Ecovapor - With the Ecovapor system, water and energy consumption are significantly reduced thanks to the automatic control of the steam saturation in the cooking chamber.   Cleaning / Maintenance Automatic cleaning system LCS (Liquid Clean System) with integrated tank and automatic dosing (cleaning liquid Combiclean in 100% recyclable capsules. Included is 1 cartridge container of liquid detergent CDL05 - 990 g). 7 automatic cleaning programs. Manual cleaning system with an external hand spray.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 30,000 h, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, AVAILABLE FOR A SHORT TERM: TRUMPF TruLaser 3030 – 3.2 kW – Year 2007 with RotoLas! TECHNICAL DATA: Make: TRUMPF Type: TruLaser L 3030 – 3.2 kW Year of manufacture: 2007 Working area: 3,000 x 1,500 x 115 mm Control system: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness mild steel: 20 mm Max. sheet thickness stainless steel: 12 mm Max. sheet thickness aluminum: 8 mm Operating hours: NC on 30,000 h (Oct. 2024) Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit Laser unit: TLF 2000 CO2 laser with high-frequency excitation, maintenance-free turbo radial blower, Reflector telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Maintenance-free three-phase servo motors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - Automatic focus position adjustment AutoLas Plus - Laser power control - Positioning laser diode - HI-LAS High-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - PMS plasma sensors - Automatic sheet metal edge detection - Programmable power cycles - Microweld - Automatic shutdown - Workspace lighting - Sinumerik 840D control system: open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - ToPs 100 lite workshop programming - Safety: multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust collector, protective cabin Kedpfxsu Afcbo Adljnc - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TruFlow 3200 laser including lens monitoring sensors - PCS Process Control System - Preparation for LiftMaster - RotoLas pipe cutting system for cutting pipes and profiles

Condition: ready for operation (used), Year of construction: 2016, operating hours: 14,802 h, controller manufacturer: BYSTRONIC, controller model: ByVision, This Bystronic BySprint Fiber 6520 was manufactured in 2016. It features a 6 kW laser power, handling work table sizes up to 6500 mm x 2000 mm. It efficiently processes materials like carbon steel, copper, and brass. The CNC control system, BYSTRONIC ByVision, includes a touchscreen and remote control for cutting parameter adjustments. Consider the opportunity to buy this Bystronic BySprint Fiber 6520 fiber laser cutting machine. Contact us for more information about this machine. Additional information • Type: Fiber Laser Condition: Very good, regularly renovated • CNC control system: BYSTRONIC ByVision with touchscreen and remote control for cutting parameter modification • Work table size (length x width): 6500 mm x 2000 mm Knodpfxjz Ndwko Adlsc • Laser power: 6 kW • Laser beam wavelength: 1060-1080 nm • Cutting head: Equipped with integral capacitive height sensor for precise beam control • Maximum cutting thickness for carbon steel: Up to 20 mm • Materials processed: Carbon steel, copper, brass

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: 20 mm MAX CIRCULAR SECTION: 152,4 mm MAX SQUARE SECTION: 152,4 X 152,4 mm SOURCE: IPG fibra 3000W ; 3000 W CONTROL UNIT: CUTLITE PENTA Z32 ACCESSORIES: FUME EXHAUSTER ; ETHERNET PORT ; USB PORT Kedpfx Adszxu Nnelsnc NOTE: AUTOMATIC BAR LOADING 6500mm; BAR UNLOADING UP TO 6000 mm; TUBE UNLOADING CUTTED ON THE BELT - MAX LENGHT 5000mm; CAPACITIVE SENSOR; No 2 INNER MONITORING WEBCAMS; ADDITIONAL X AXIS FOR HIGH-SPEED DRILLING; ALMA SOFTWARE

Condition: ready for operation (used), Year of construction: 2022, operating hours: 3,550 h, laser power: 500 W, table length: 3,048 mm, table width: 1,524 mm, travel distance X-axis: 1,524 mm, travel distance Z-axis: 3,048 mm, overall weight: 2,495 kg, total width: 2,083 mm, total height: 1,346 mm, product length (max.): 3,988 mm, table load: 1,000 kg, number of axes: 3, CO₂ laser cutting machine manufactured in 2022. This KERN KER60120-KT500 OPF features a working area of 1524 × 3048 mm and a maximum workpiece height of 50 mm. It includes a powerful 500 W CO₂ laser and offers various work tables for different materials. If you are looking to get high-quality cutting capabilities, consider the KERN KER60120-KT500 OPF machine we have for sale. Contact us for further details regarding this machine. Machine – JustLaser 15.30L-C500-MC • Machine Type: CO₂ Laser Cutting and Engraving System • Configuration: Open Flatbed Gantry Laser System • Maximum Workpiece Height: 50 mm • Maximum Engraving Speed: 3.8 m/s • Maximum Engraving Speed (Metal Cutting Option): 3.2 m/s • Maximum Engraving Speed (Z12 Option): 1.5 m/s • Maximum Cutting Speed: 0.5 m/s • Motors: Brushless DC Servo Motors • Encoder System: Incremental Measurement System • Optics: Air-purged telescope, lenses and mirrors • Standard Lens: 2.5" • Optional Lens: 5.0" • Software: KCAM Laser Software • Interface: G-Code, HPGL, AD-Logic System • Control Board: KLCM Controlboard • Operator Controls: Key Switch, Emergency Stop, Mouse, Keyboard, Monitor and PC Included • Electrical Supply: 3 × 400 V (3L + N + PE), 50/60 Hz • Table Exhaust Requirement: 3000 m³/h • Axis Exhaust Requirement: 1500 m³/h • Maximum Air Pressure: 10 bar • Maximum Inlet Pressure: 12 bar • Maximum Air Flow: 240 l/min • Connection Size: 6 mm • Noise Level: 55 dB • Certification: CE • Operating Temperature: +15 °C to +25 °C • Humidity: 40–70 % Non-Condensing • Environment: Dust-Free • Active Laser Protection Shield • Pressure Sensors • Light Curtain • Interlock Safety System • Metal Cutting Option Included • Capacitive Height Follower • Metal Cutting Table • Copper Nozzle Knodpszbub Dsfx Adlec • 2.5" Lens Set • k-vision Print & Cut Camera System • JustAIR High Performance Turbines (2 × 1500 m³/h) Laser Source – Kern Laser Systems • Model: KER50120-4K500 OPP • Laser Type: Sealed-off CO₂ Laser • Laser Power: 500 W (0.5 kW) • Laser Wavelength: 10.6 µm • Supply Voltage: 380–415 VAC • Phase: 3 Phase (4 Wire + Ground) • Frequency: 50/60 Hz • Maximum Fuse Size: 40 A • Full Load Current: 32.3 A • Disconnect Rating: 40 A • Short Circuit Current Rating: 5000 A • Interrupt Capacity: 35000 A • Largest Amp Load: 16 A • Laser Class: Class 4 • Country of Manufacture: USA Chiller – SMC HRS090-AF-40 • Cooling Type: Water Cooling • Cooling Capacity: 5 kW • Refrigerant: R410A • Refrigerant Charge: 1.5 kg • Weight: 136 kg • Power Supply: 3~ 380–415 V, 50/60 Hz

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting Kjdpfevpalasx Adljnc and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Control system: Siemens Sinumerik 840 D • Working area: 3000 × 1500 × 100 mm • Paint: white RAL 9002 / gentian blue RAL 5010 • Enclosed machine frame with integrated laser unit • Laser unit: CO₂ laser TLF 5000, high-frequency excited • Cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/waste • Drives: gantry drive combined with linear direct drives • Laser power control • HI-LAS high-pressure cutting • PMS plasma sensor system • High-speed processing with SprintLas • ContourLas for producing small holes • Programmable power cycles • Microweld • Programmable cutting gas pressure control • Laser cutting head with 5" lens and 7.5" lens • Quick-change system for cutting heads • Automatic sheet edge detection • APC capacitive height control and process control • PCS (Process Control System) • Positioning laser diode • Automatic focus adjustment (AutoLas Plus) • Spray device for safe thick sheet processing • Automatic shutdown • Working area lighting • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm • Sinumerik 840D control: • Open PC-based control system • Easy operation • Online help • Diagnostic functions • Maintenance logbook • Technology data • Remote service • Shopfloor programming: ToPs 100 lite • Safety • Multi-beam light barriers • Fully enclosed beam guidance with nitrogen ventilation • Monitoring system • Multi-chamber extraction and compact dust collector • Protective enclosure • Software for Machine System • TruTops Laser postprocessor TCL 3050 – 1 unit • Control system software Cell machine TCL3050 (2nd license) Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed) • Base unit incl. sheet separation device and thickness measuring system • Rack extension (R), interchangeable tines • Pallet handling extension (P) • Separation of thin sheets (1–2 mm) • Third position without unloading station • Unloading station • Stainless steel tines for low-scratch handling • LiftMaster base frame for warehouse connection and double loading/unloading carts • Safety devices: second light barrier circuit • Extended Machine Equipment • Cutting head with 3.75" lens for high-speed cutting • Additional cutting head with 10" lens for thick sheet processing • Automation Preparation (for future upgrade) Kedpfx Aeym A Hredljnc • Preparation for LiftMaster (standard pallets) • Includes installation, commissioning, and training • Includes warranty, transport, and packaging • Network connection

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg Kedpfx Ajzk D Hmodlenc • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Year of construction: 2026, condition: like new (used), Binder KBF 720 E7 from 2026. Device is like new, 2-year warranty on spare parts. PRODUCT DESCRIPTION A proven specialist for reliable ICH stability testing in the pharmaceutical industry: the KBF handles all long-term tests, accelerated tests, and extreme condition tests. It meets all important ICH requirements, from precision to programming and documentation. Features flexible water supply options for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. With optional lighting modules, the KBF becomes an ICH photostability testing chamber or a plant growth chamber. KEY FEATURES Temperature range: 0°C to 70°C Humidity range from 10% to 80% RH Proven APT.line™ preheating chamber technology Kedpfx Asy R Uaaedlenc Energy savings of up to 40% compared to previous model Energy-efficient cooling thanks to modern inverter refrigeration unit Cooling using environmentally friendly refrigerant R-600a Heated door to prevent condensate formation Adjustable fan speed Humidity control with capacitive sensor and fast-reacting steam humidification Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner doors made of metal oxide-coated safety glass Two stainless steel wire shelves 80 mm x 45 mm access port with silicone plug Freestanding unit with durable double casters and front brakes Intuitive controller with touchscreen and both segment programming and real-time programming Ergonomically adjustable control terminal Signal triangle with illuminated status indicator Internal data logger, measurement values in open format readable via USB Independent temperature safety device class 3.3 (DIN 12880) with visual and acoustic alarm Device self-test for comprehensive status analysis Data exchange interfaces: Ethernet, USB Optional lighting modules for ICH photostability testing Optional LED lighting modules for plant cultivation

Condition: used, empty load weight: 9,424 kg, maximum load weight: 29,576 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2018, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, Year of construction: 2018, Equipment: ABS, Tare weight: 9424kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,650 mmTyre size: 385/65 R22.5, Loading area volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front and rear, Pallet box, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Ferry lashings, Double deck with beams, 1x15 and 2x7 pin plug, Antispray, LED tank display, with capacitive sensor in conjunction with TrailerConnect: Dual line brake system acc. to RR EG 71/320 standard coupling and add. DUOMATIC coupling: Tyre pressure control system : Trailer-Info-System (Smartboard) incl. axle load indicator, milage record: Brake wear indicator: 13 pairs of lashing eyes lateral in alu floor 2000kg tensile force p. hole acc. to EN 12640: Roller buffers at rear:, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Kjdpfxez R Hf Ds Adljnc

Condition: used, mileage: 172,947 km, power: 125 kW (169.95 HP), first registration: 02/2021, fuel type: diesel, overall weight: 3,400 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,339 mm, total width: 2,032 mm, total height: 1,974 mm, loading space length: 2,778 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and prior sale excepted! Internal number: 0020. LT59970 ----EQUIPMENT * Airbag (passenger side) * Trailer hitch - fixed, 13-pin socket - incl. trailer stability control (TSC) * Blind Spot Information System incl. Cross Traffic Alert and trailer function, exterior mirrors, electrically adjustable and heated, additionally electrically foldable * Headlights: Bi-Xenon headlights with LED daytime running lights and fog lights with static cornering lights * Paint: Metallic * Package: Service Line - shelving systems (left and right) - workbench - ventilation for transport of gas cylinders - HDF wall lining - screen-printed wooden floor in the cargo area (the standard lashing eyes are omitted) * Visibility Package III - exterior mirrors, electrically adjustable and heated - windshield, heated - windshield washer fluid level sensor - exterior mirrors, electrically foldable - windshield wipers with rain sensor - headlight assistant with day/night sensor - lane keeping assistant with driver fatigue alert and high beam assistant - rear view camera - Connected Radio audio system, DAB/DAB+, FordPass Connect 8" touchscreen, antenna, control panel and audio remote control on the steering wheel - support for Android, Apple CarPlay * Rear view camera with parking pilot system front and rear with fog lights with image transmission of the rear driving path * Multifunction display with high-mounted LED exterior light downlight * Radio: Audio system 24: Ford audio system including Ford SYNC3 with AppLink, DAB/DAB+, navigation system. Radio (FM/AM) 8" touchscreen multifunction display (20.32 cm) 4 speakers. FordPass Connect WLAN hotspot. Integrated control panel and audio remote control on the steering wheel. Ford SYNC 3 with touchscreen (hands-free system with voice control, SMS reading/sending function, Bluetooth, emergency call assistant...) AppLink (extended voice control, private mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology,...) dynamic navigation. Lane recommendation map of Western Europe * Seats: Seat package 15 - partition (through-loading flap), without window (Custom truck Trend) - driver's seat, 4-way adjustable (forward/backward, backrest, seat cushion tilt, height) - passenger double seat with storage compartment under individually foldable seat cushions - headrests, height-adjustable - tray integrated in the double passenger seat (foldable) - seat heating for driver - seat heating for passenger (outer seat) - interior armrest for driver - manual lumbar support (driver's seat) - TREND seat cover: fabric * Partition without window with through-loading flap * Anti-lock braking system with electronic brake force distribution (EBD) * Airbag, driver side * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display * Roof, flat * Headliner in driver's cabin - up to the partition to the cargo area * Double-wing rear door with 180° opening angle (without window) Knsdpfsxz Stvex Adloc * Rev counter * Third brake light * Electronic Stability Program (ESP) with Traction Control System (TCS) - Hill Start Assist - Crosswind Assist - Emergency Brake Assist - Rollover Protection * Front electric windows - with quick-down/up function for driver's side * Ford Easy Fuel - comfortable fuel filler cap and misfueling protection * Cruise control incl. leather steering wheel with adjustable speed limiter * Transmission: 6-speed SelectShift automatic transmission * Glove box with lock

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) Kedpfx Aderkntcelenc - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Knjdpfx Ajz Duvvedlec Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: new, Huber Mobile Chiller / Chilled Water Unit / Process Chiller Huber CS 550 OD High-performance mobile chiller with air-cooled refrigeration unit, circulating pump and extensive accessories For sale is a like-new mobile chiller / chilled water unit Knjdezt Iqzjpfx Adljc from the manufacturer Huber. The unit has not yet been used. The unit is suitable for industrial process cooling, machine cooling, chilled water supply and for general industrial cooling and temperature control applications. Technical data: Manufacturer: Huber Type: CS 550 OD Equipment type: Mobile Chiller / Chilled Water Unit / Process Chiller Item No.: 32-100110 Year of manufacture: 11/2023 Made in Germany Cooling capacity according to nameplate: 55,000 W at +10 °C supply temperature and +50 °C return temperature Temperature range: -20 to +85 °C Internal temperature sensor: Pt100 Temperature stability at -10 °C: 2 K Heating capacity: 17 kW Cooling capacity at 20 °C ambient temperature: at +15 °C: 70 kW at +10 °C: 60 kW at 0 °C: 33 kW at -10 °C: 20 kW at -20 °C: 12 kW Power connection: 400 VAC / 50 Hz (3Ph+N+PE) Power consumption: 27.5 kW Max. power consumption: 52 A Pump: CM5-4 Max. flow rate: 125 l/min Max. delivery pressure according to nameplate: 4.0 bar Pump connection: G1 external thread Min. filling volume: 160 l Low level warning volume: 175 l Max. filling volume: 195 l Refrigerant: R449A Refrigerant filling weight max.: 23 kg Max. operating pressure: 28 bar Interface: RS232 Safety class: I / NFL Protection class of electrical components: IP54 Min. ambient temperature: -20 °C Max. ambient temperature: +50 °C Dimensions: approx. 1400 × 1000 × 1800 mm (W × D × H) Net weight: approx. 715 kg Sound pressure level: 79 dB(A) ± 4 dB(A) Equipment: Air-cooled refrigeration unit Circulating pump Atmospherically open tank Copper-soldered evaporator Digital level indicator Highly efficient fan motor Feed pump with integrated over-temperature protection Manual bypass valve Control unit B400 / RB400 Capacitive user interface with OLED display Multi-colored status indicator RS232 interface Separate operating / control panel Connection / cable according to images Temperature control / connecting hoses according to images Various connection fittings according to images Additional accessories according to images Movable unit housing on rollers Application areas: Industrial process cooling Machine cooling Production plants Chilled water supply Temperature control applications Outdoor installation Winter operation Scope of delivery: 1 × Huber CS 550 OD Mobile Chiller / Chilled Water Unit 1 × separate operating / control panel Connection / cable according to images Temperature control / connecting hoses according to images Various connection fittings according to images Several Huber accessories according to images 3 × accessory boxes with the contents shown Additional accessories according to images Wooden transport box Condition: Like new Never used Year of manufacture 11/2023 Optical condition according to images Accessories partially original packaging or in accessory boxes The table shown in the photos and other items not explicitly mentioned are not part of the sale. Expedited shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by phone.

Condition: new, functionality: fully functional, Core Optical Specifications • Measurement Principle: Dual-channel scattered light (forward scattering) paired with a direct reference beam. • Scattering Angle: 11°. • Detectors: 8 hermetically encapsulated silicon photodiodes for scattered light, and 1 direct-beam photodiode for reference and high-concentration tracking. • Wavelength Range: 730 – 970 nm (Near-Infrared / NIR). • Light Source: Incandescent tungsten lamp (Nominal 5.0 V DC). • Measurement Range: Typically 0 – 0.5 ppm to 500 ppm (equivalent to 0–200 FTU / 0–50 EBC depending on path length). • Resolution: < ±0.05% • Repeatability: < ±0.5% Material & Process Limits • Sensor Windows: Manufactured from single-crystal sapphire for maximum resistance to chemical corrosion and abrasion. • Housing Material: Stainless steel (standard 1.4571 / 316Ti). • Line Sizes Supported: Accommodates process pipes from DN 6 to DN 200 (1/4" to 8") via customized flow cells. • Process Temperature: • Standard version: Permanent 0°C to +120°C (with short daily peaks up to 150°C). Kjdo Aayziopfx Adlsnc • High-temperature (HT) version: -20°C to +240°C. • Process Pressure: Supports application environments from 10 mbar up to 325 bar depending on the specific line fitting and configuration. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. Ksdpsx Hyt Rjfx Adlonc The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.