Used Planing Plant for sale (4,890)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Hnedpfxez D Ihfj Ak Ueu

Condition: new, Year of construction: 2026, overall weight: 3,000 kg, power: 35 kW (47.59 HP), shaft diameter: 400 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. Hnedsz Erbxepfx Ak Usu • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: excellent (used), Möller tilting trays according to plan B, with raised bumps No need for dusting Thanks to special bumps on the trays, the dough pieces cannot stick Hnedpfx Asghr Nnek Uou Tilting trays, 58.5 x 38.5 x 4.5 cm We still have approximately 200 pieces in stock.

Year of construction: 2026, condition: new, functionality: fully functional, power: 200 kW (271.92 HP), load capacity: 1,300 kg, MIZAR PRP Series - Copper Wire Granulator & Cable Recycling Plant Turnkey Solution for Maximum Copper Recovery (99% Purity) The MIZAR PRP Series is a fully automatic cable recycling line designed to process complex, mixed, and contaminated cables into high-purity copper and plastic granules. Built for 24/7 industrial use, it ensures fast ROI, low operational costs, and maximum efficiency. 7-STEP PRECISION SEPARATION (100% Dry Process) • Shredder (SSH): Pre-shredding for bulky cables. • Magnetic Separator (OMS): Ferrous metal extraction. • Granulator (FGR): Fine size reduction. • Zigzag Separator (ZZS): Air separation of light fractions. • Turbo Mill (TRM): Ultra-fine grinding for complex wires. • Densimetric Separator (DES): Density-based final pure copper separation. • Dust Collector (DTF): Clean, eco-friendly operation. PROCESSED MATERIALS Twin & earth, flexible, telecom (Cat 5/6), complex automotive harnesses, underground, coaxial, and mixed WEEE cables. MODEL RANGE & TECHNICAL SPECS (Select the ideal capacity for your facility) • PRP S1: Up to 400 kg/h | Total Power: 80 kW | Footprint: 50 m² • PRP M1: Up to 800 kg/h | Total Power: 135 kW | Footprint: 100 m² • PRP L1: Up to 1300 kg/h | Total Power: 200 kW | Footprint: 120 m² • PRP XL1: Up to 2000 kg/h | Total Power: 300 kW | Footprint: 140 m² CORE ADVANTAGES • Up to 99% copper purity • Smart PLC automation with continuous feeding • Vibration-optimized, heavy-duty chassis • CE, ISO 9001, 14001, 45001, 27001 certified Need a tailored solution? Contact us for a customized layout, technical drawings, or send your material for a performance test. Hjdpfsyy Rk Hex Ak Usnu Mizar Recycling Machinery

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Hnjdpfox Dcdkex Ak Uju

Condition: used, Applicable material: Concrete POLYGONMACH PMC150 150m3 mobile concrete batching plant is a mobile concrete batching plant used to produce large quantities of concrete in large construction projects. These power plants are portable and rebuildable, can work with a wide range of materials and can be used for many construction projects due to their mobility. The following steps are recommended to use the POLYGONMACH 150m3 mobile concrete batching plant effectively: 1. Correct positioning: The switchboard should be installed at the easiest access point possible. It must be securely located and engineers must ensure primary resources are in place. 2. Personnel: Plant operators must be experienced and trained to ensure the best results in construction projects. Employees should be trained regularly and use appropriate protective equipment to work inside the plant. Hjdpfx Akox D A Icj Usnu 3. Maintenance: Regular maintenance ensures longer life and efficient operation of the plant. This can reduce disruptions and prevent irregularities in mobile switchboard operations. 4. Production: In addition to their productivity, 150m3 mobile concrete batching plants have technologies that enable the production of high quality concrete. Therefore, it is important to use the right concrete mix to ensure efficient production every time. 5. Storage: The produced concrete should be stored correctly and well protected until the time of use. Ideal storage conditions will ensure safe handling and trouble-free use of concrete. Mobility: mobile Capacity: 150 m³/h

Condition: used, Applicable material: Concrete Capacity: 160 m^3/h POLYGONMACH PSC160 160 M3/hour stationary concrete batching plant can be preferred due to its many advantages. The following reasons explain why you should prefer a 160 m3/hour stationary concrete batching plant: 1. High capacity: 160 m3/hour fixed concrete batching plants provide high capacity concrete production. This allows them to be used in large construction projects, infrastructure activities and other activities that require high volumes of concrete. 2. Production of quality concrete: High quality concrete is very important for the strength and durability of the concrete structure. 160 M3/h stationary concrete batching plants are designed to produce high quality concrete, which allows safe, durable and quality structures to be built. 3. Efficient operation: The automatic 160 m3/hour fixed concrete batching plants speed up the activities and reduce the labor costs. Thanks to automatic dosing systems, the right amount of ingredients is added, which increases the efficiency of the business. 4. Environmentally friendly: 160 m3/hour fixed concrete batching plants offer environmentally friendly features. Low energy consumption and low emission levels help less harm to the environment. 5. Cost-effective: 160 m3/hour stationary concrete batching plants have low operating costs despite their high capacity. This can contribute to large projects that cost less and provide a longer duration of action. As a result, POLYGONMACH 160 m3/hour stationary concrete batching plants are preferred due to their high capacity, high quality concrete production, high efficiency and environmentally friendly features. Mobility: stationary Other characteristics: automatic Hnedpfxsx D Dcne Ak Ueu Capacity: 160 m³/h(5,650.35 ft³/h)

Condition: used, Applicable material: Concrete Make of engine: Audi Capacity: 60 m^3/h Hnsdpfx Akex D Dhde Ueu The POLYGONMACH PSC60 60 m3 stationary concrete batching plant is capable of producing 60 cubic meters of concrete per hour. These types of stationary concrete batching plants are designed to produce high-quality concrete, primarily used in large-scale construction projects. Stationary concrete batching plants comprise a complex system that includes components like concrete mixers, cement silos, water scales, aggregate weighing systems, and control panels. They come in various capacities and are chosen based on the project's needs. The POLYGONMACH 60 m3/h stationary concrete batching plant has many advantages, some of which are: High Capacity: The 60 m3/h stationary concrete batching plant, capable of producing 60 cubic meters of concrete per hour, is ideal for use in large projects. Quality Concrete Production: Stationary concrete batching plants are designed to produce high-quality concrete. Hence, the 60 m3/h stationary concrete batching plant also produces high-quality concrete. Labour-saving: Stationary concrete batching plants reduce the number of workers, thus cutting down labour costs. Also, the stationary nature of the plant eliminates time and costs of relocation. Time-saving: Stationary concrete batching plants speed up the process of concrete production and distribution, thereby shortening project completion time. Less Waste: Stationary concrete batching plants produce the exact amount of concrete needed, thus reducing waste and being environmentally friendly. Lower operating costs: Stationary concrete batching plants cut down operating costs and are more economical compared to other production methods. Mobility: stationary Capacity: 60 m³/h(2,118.88 ft³/h)

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® SD COMPACT screening drum is constructed from a robust, foldable structure and is a semi-mobile machine. The screening drum is used for screening coarse materials such as soil, gravel, wood chips, various waste, and chip bundles, making it ideal for the recycling industry. The screening drum can also be upgraded with a bunker and an extension. This creates a system with a bunker belt that can be operated in both directions, is quickly interchangeable, and features fully electric control. In conjunction with the extension, we gain additional screening area and the option of a third fraction. It's worth mentioning that the drum can be changed on both the screening drum and the extension. There are seven different drums available for the screening drum and four different drums for the extension. Technical Specifications: - Drum length: 2.1 m - Usable drum length: 1.7 m - Drum outer diameter: 1.3 m - Usable screening area: 7 m² - Bucket width: 2.3 m - System capacity: 20 - 50 t/h - Mesh size: Ø6 - Ø100 mm - Hopper opening: 2.24 x 0.85 m - Speed (adjustable): 5 - 20 rpm - Drive power: 400V / 5.5 kW (optional 7.5 kW) - Filling height: 2.55 m - Weight: 1500 kg Hedpfx Akjr Aknds Usnu - Length: 3.34 m - Width: 2.36 m - Height: 1.95 or 2.92 m (with support) Options: - Vibration motors for emptying the hopper - Drum rotation in both directions - Six different drum variants - Cleaning brush - Easy drum replacement - Two-wheel drive - Hour meter

Condition: used, Year of construction: 1981, -1- used impact crusher for hard rock, inlet approx. 350 x 690, rotor 1000 x 670, capacity up to 40 t/h, feed size up to 180 mm, final grain size 0/35 mm. Hodpfx Akew N Hk He Uonu

Year of construction: 2025, condition: new, functionality: fully functional, The ASCO® GS COMPACT is a robust and efficient solution for separating and classifying coarse material in various industries, such as mining, construction, and recycling. Utilizing strong, evenly spaced parallel bars, the Grizzly Screen separates larger particles and rock fragments while allowing finer material to pass through. This ensures effective material processing and prevents unnecessary wear on downstream equipment. Technical Specifications: - System capacity: 65 t/h with springs, 60 t/h without springs - Maximum bucket width: 2.9 m - Screening area: 4.9 m² - Weight: 1120 kg - Width: 3.2 m - Length: 2.85 m - Height: 2.7 m Hsdpfxowhmq Ej Ak Ujnu - Loading height: 2.56 m Options: - Outriggers with springs - Outriggers without springs

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated metal flooring, badge_tracstrap Features: - Perforated metal flooring - TracStrap securing system - Shovel holder Net price: €7,096.64 / Gross price: €8,445.00 Article number: DPT235371700.23 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 370 x 170 x 20 cm • External dimensions (L x W x H): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 826 kg • Payload: 2,674 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, internal sides • Screen-printed plywood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket holder • 10x lashing eyelets on the side panel (1000dAN/kg), TÜV certified • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for immediate use • Front wedges are adjustable and form the basis for positive cargo securing Hnjdpfezy Dgrex Ak Uou • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist • ALKO overrun device and parking brake • Steel casting tow hitch with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting, and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to make requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp Equipment: - Spare wheel - Robust steel loading platform - Highly customizable Net price: €7,714.29 / Gross price: €9,180.01 Article number: GP2335401802.01 Technical data: • Brand: Brian James • Model: General Plant • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 400 x 180 x 30 cm • External dimensions (L x W x H): 569 x 240 x 210 cm • Loading height of the floor: 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 926 kg • Payload: 2,574 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle Hodszy Dhiopfx Ak Uonu • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Universal, versatile construction machinery trailer - unique on the market • Every available option can be flexibly added or removed, enabling needs-based customization for almost any application • Option to attach side panels, tarpaulin frames, side panel extensions or front wall extensions at all 4 corners • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, other ramps, extensions, etc. can be retrofitted at any time • Robust steel fenders with non-slip perforated profile • Reinforced screen-printed wood floor, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with additional longitudinal support under the loading area • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamping locks, rubber buffer dampens noise • Heavy-duty continuous perforated steel ramp, steel galvanized, with spring support • Very low chassis for a low approach angle • Lashing points at the bottom and top of the side panel (1000dAN/kg), TÜV certified • Side panel color: black • Maintenance-free axles and suspension systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Automatic reversing system • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, long-lasting and reliable • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection for the rear lights • Automatic heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request specific options! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel rack - 10x lashing eyes Net: €5,983.19 / Gross: €7,120.00 Article number: DPT235371700.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 370 x 170 x 20 cm • External dimensions (LxWxH): 562 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted Hnjdpfx Akezy Dlne Usu DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wooden floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel individual ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clip locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing eyes on the side rail (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing down to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side rail • Reverse automatic • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED marker lights at the rear • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to inquire about your specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: generator unit Equipment: - Spare wheel - Supports - Adjustable crossbars Net: €4,058.82 / Gross: €4,830.00 Article number: CP3227281300.01 Technical data: • Brand: Brian James • Model: Chassis Plant • Vehicle type: Special trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 280 x 130 x 0 cm • External dimensions (LxWxH): 456 x 183 x 0 cm • Loading height of the floor: 44 cm • Perm. total weight: 2,700 kg • Unladen weight: 460 kg • Payload: 2,240 kg • Chassis: Low loader (wheels next to the body) • Tires: 165R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Emergency generator construction machinery trailer - Unique on the market • Robust steel fenders with non-slip perforated profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Very low chassis for a low approach angle • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the drawbar • 4x adjustable crossbars • Rear supports, pair at the rear • Supports at the front • Reverse assist • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Display for wheel nut tightness • Very stable V-shaped drawbar, REINFORCED • 13-pole plug • Complete LED lighting: Extremely bright, durable and reliable. • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Hnsdpfx Aezy Dn Njk Ueu Accessories can be retrofitted by our specialist workshop! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel holder - 10x lashing points Net: €6,042.02 / Gross: €7,190.00 Article number: DPT235321700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel holder • 10x lashing point on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Hjdpfx Ajzy Dvgek Uenu Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: refurbished (used), Year of construction: 2023, operating hours: 2,048 h, functionality: fully functional, power: 310 kW (421.48 HP), year of last overhaul: 2026, Equipment: Standard Inventhor 6 package: Load-Sensing system Fuel tank, 500 liters Longitudinal conveyor belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system – additional electric pump for operating the following functions when the engine is stopped: raising/lowering/tilting the rear conveyor belt, opening/closing the comb flap, opening/closing the comb, raising/lowering the folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder tool box acoustic start-up warning Doppstadt telematics system Paint: RAL 2011, traffic orange Additional equipment: Drive train 310 kW - EV 400 mm chain track unit Size L shredding system chute extension 350 mm, watering system, left side rear conveyor belt 4.9 m over-belt magnet, neodymium frame for over-belt magnet * DoppBasket system can be retrofitted! * Delivery date to be agreed. Hnodpezqrr Defx Ak Uou

Condition: excellent (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 09/2027, overall weight: 540 kg, empty load weight: 540 kg, input frequency: 50 Hz, Eberhardt RuLa Universal ST Manual control Hjdozq U Alspfx Ak Uonu Machine is mobile and features a locking mechanism Possible weight ranges: Option: 150-1500g / 450-2500 g Simple, robust technology! Connection: 400V, 16A CEE plug Dimensions: 820 x 1000 x 1550 mm (W x D x H) Used machine

Condition: used, Year of construction: 1999, A complete screw manufacturing factory with 8 production lines is available for sale. The facility is designed for the industrial production of wood screws, metric screws, and inch screws. The factory includes all necessary machinery covering the entire production process – from wire processing and cold forming to thread rolling and finishing operations. A large inventory of spare parts is also included to ensure long-term operation and maintenance of the production lines. Machinery Overview Thread Rolling Machines 1 × Charng Guey CGR510 4 × Hilgeland thread rolling machines (Year 1987–1992) 1 × Hilgeland (Year 1959) 2 × EWM (Year 1986 / 1989) 1 × Malmedi thread rolling machine Hnedoztfvujpfx Ak Usu 1 × Hilgeland Ronsdorf Pointing Machines 6 × ME10 2 × ME12 Cold Heading Machines / Presses 3 × Sacma 31 (Year 1984 / 1985 / 1986) 1 × Sacma 21 (Year 1984) 2 × Klose MTH 250 1 × Omega 122EM 1 × 5-stage press Jern Yao JBF-17B5SL Deburring Machines 2 × AAG12 4 × AAG10 Centrifuges 10 × units Key Advantages Complete screw production facility Production of wood screws, metric screws and inch screws 8 production lines Large spare parts inventory included Ready for industrial mass production Further technical details and inspection available upon request.

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 Hedpozvvuajfx Ak Usnu with 5th spindle at the bottom Includes 5 planing heads.

Condition: ready for operation (used), Year of construction: 2017, Dear customers, To ensure a quick and reliable response to your inquiry, we kindly ask you to contact us preferably by email. Hnedpfegny Ryjx Ak Ueu This way, we can immediately assign your request to the appropriate contact person, collect all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! Technical data will follow.

Condition: like new (used), Year of construction: 2026, Demonstration machine with approximately 9 operating hours Another machine, available immediately (ex works Neckartailfingen) *Options available at an extra charge - see below Included: + Profile rotor for higher throughput We would be happy to provide a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via a freight forwarder, and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Knives: 15 pieces, reversible Option: double knife row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Hopper volume: approx. 0.6 m³ Hydraulically actuated slide Screen mesh size as desired (10 - 40 mm) Suction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (L x W x H): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% (dry basis) . Standard included: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 RPM for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide Hnsdpfx Asb Ny Eyek Uju - Pertinax guides for hydraulic slide - Vibration-damping machine feet - CE compliant . Optional shredder features at an extra charge: - Raise the shredder by 30 cm (preparation for a conveyor belt) + €2,080 net - Eco-rings: + €1,980 net (recommended for more than 20% hardwood) - Double knife row + €995 net - Special scraper + €990 net (recommended when shredding veneer or paper, or items with a material thickness of less than 3 mm) - Articulating conveyor belt + €8,770 net Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm - Automatic overband magnet + €5,980 net Alternatively, a fixed magnet block above the conveyor belt for regular manual removal + €990 net (in case of low metal content) - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) alternatively, manual start and stop of the belts + €595 net . Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Year of construction: 2012, condition: good (used), Manufacturer: Gipo AG Type: B 1370 Year of manufacture: 2012 Inlet size: 1.320 x 680mm Included: – Frame – Pre-Screen – Electrical motors for Crusher and Pre-screen Spare jaws in stock! Hsdpfx Aksilh Efs Ujnu

Condition: refurbished (used), Attachment shredder for mobile EXTEC screening machine Hnsdpfxju Dhkdj Ak Usu e.g. for EXTEC 5000S, Turbo, Turbotrac, S-Series) for pre-shredding cohesive/clumpy material

Condition: excellent (used), System: Decanter / centrifuge dewatering system Manufacturer: Hiller Model: demonstration machine System: Dewatering system as a compact system as a ready-to-connect, operational unit mounted on a platform. Design: Changeable rack as a bridge with frame structure made of galvanized steel, plug-and-play integration into ongoing operation Type: DP45N Mach. no.: on request Hnsdpfoppt Ibex Ak Ueu Year of manufacture: 2018 Throughput: up to max. 20 m3/h Max. Speed: 3500 I/min Acceleration: 3063 x g Drum inner diameter: approx. 450 mm Parts in contact with the product: stainless steel Parts not in contact with the product: steel Drum length: 1948 mm Drum material: 1.4392 Screw material: 1.4404/1.4408 Construction: Centrifuge base frame made of steel with foot and support plates for holding and raising the centrifuge Central discharge: with compensator Central chute: incl. central control: Pipe for product-contacting lines: made of stainless steel Electrical engineering; Hiller-VA / Rittal switchgear wired Automation device Siemens S7 Dimensions: approx. 5550x2150x2100 mm (LxWxH) Transport weight: 7500 kg OTHER: This system is available twice