Used Plasma Cutter Dc for sale (6,197)

Condition: used, This listing is for the Barkey Plasmatherm Laboratory plasma thawer The units are in full working condition and are ready for immediate use These items show very little signs of use Available in original packaging with manuals The Barkey Plasmatherm is a specialised laboratory and clinical device designed for the safe thawing and warming of fresh frozen plasma (FFP), blood components, and other infusion products. The system uses controlled dry-heating technology to ensure uniform and gentle thawing while maintaining the integrity of sensitive biological samples. Unlike traditional water baths, the Plasmatherm operates using a sealed temperature-controlled system that prevents direct contact between samples and water. This improves hygiene, reduces contamination risk, and simplifies maintenance. The device maintains precise temperatures typically between 37°C and 45°C, ensuring optimal conditions for plasma thawing and blood warming procedures. Safety is a key feature of the system, incorporating over-temperature protection, leak detection sensors, and visual and acoustic alarms to alert operators to any irregularities. A transparent lid allows continuous monitoring of the thawing process while the intuitive control interface enables easy operation and accurate programming of temperature and time settings. Kedpjyufrgjfx Aqrsnc The Plasmatherm is widely used in hospital blood banks, transfusion services, and clinical laboratories where rapid, reliable, and hygienic thawing of plasma and blood products is essential. Its efficient design helps laboratories improve workflow while maintaining strict compliance with transfusion and laboratory safety standards.

Year of construction: 2008, condition: used, controller model: Windows XP SP3, power: 9 kW (12.24 HP), working width: 2,500 mm, TECHNICAL DETAILS Maximum working width: 2,500 mm Minimum working width: 510 mm Number of saw blades: 6 + 1 MACHINE DETAILS Control system: Windows XP SP3 Machine programming software: Packsize control console 3.9.3 Total connected power: 9 kW EQUIPMENT Saw carriage Knodpfx Aoz Ekd Eeqrsc CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8534

Condition: used, Offered for sale is a programmable guillotine cutter with electronic control system. Technical specifications: Cutting length of the original material: 75-1000mm, cutting width of the original material: 180-1000mm, processable paper grammage: 40-173g/m², minimum sheet length: 40mm, minimum sheet width: 40mm, maximum stack height: 80mm. Control system: SEYPA-TV with electronic control panel and program selection buttons. Equipped with large work table, side tables, material stop, foot control and rear material support area. Inspection possible by arrangement. Kjdpfxjz N E Uns Aqrsnc

Condition: used, Year of construction: 2021, Flatbed Cutter Elitron TH 31.20 for Sale. Year of Manufacture: 2021 Kodpfx Aqjw Duchsrjnc Two-carriage configuration for increased productivity. Specifications: - Working area: 3150 x 2050 mm - Working speed up to 102 m/min - Two independent cutting heads for materials up to 50 mm thick - Working area divided into 40 individual vacuum sectors - High-efficiency 11 kW vacuum pump integrated into the machine frame - Monolithic frame - Axes driven by linear roller bearings and precision rack-and-pinion system Configuration includes: - One electric oscillating knife module - One pneumatic oscillating knife module - Two tangential modules - Two creasing modules - One 3kW milling module (60,000 rpm) - Two laser pointers - Two marking tools - External dust extractor for milling (3.45 kW) - Seeker System PRO - Video projection system onto the worktable - Twin-Cut software for optimizing the workload of both cutting heads to maximize performance and output The Elitron flatbed cutter is installed in our demo showroom. Inspection and testing are welcome. Installation and training services can be provided for an additional fee.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, repeat accuracy: 0.2 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” Knodpsfnlkwofx Aqrjc • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter Knsdpfxoz Suafe Aqrec MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons

Year of construction: 2024, operating hours: 5 h, condition: new, functionality: fully functional, The NOMA NOWICKI KN-60 cutter is a high-speed meat cutter with a 60-liter bowl, manufactured in 2024, designed for grinding, emulsifying, and mixing meat, fat, and other raw materials in small and medium-sized food processing plants and food service companies. The machine is equipped with a microprocessor-based control system with memory for 40 processing programs, stepless speed control for the blades and bowl, hydraulic unloading, and a hygienic design that facilitates cleaning. Replacement parts are included. The mixing function with reverse blade rotation (from – 200 to – 400 rpm) allows the filling to be gently mixed without further grinding. Once the process is complete, the finished mixture is discharged hydraulically, with an adjustable discharge disc speed, for both dry and liquid mixtures. All operating parameters are controlled by a microprocessor, which can store up to 40 processing programs. Key Features of the NOMA NOWICKI KN-60 meat cutter A wide range of blade speeds, smooth adjustment of blade and bowl rotation speeds, and the ability to select different blade combinations provide great flexibility when changing recipes and product consistencies. Reverse mixing, the ability to save 40 programs, and high hourly throughput ensure consistent stuffing quality with short processing times. The cutter’s design facilitates hygiene and operator comfort: all food-contact surfaces are polished, flat surfaces are angled at 3° to allow water to drain, and the covers open for cleaning. The high product entry threshold, the bowl rim, the opening in the lid for adding spices during operation, quick access to the blades, and the sound-dampening lid improve ergonomics and working comfort. Technical Specifications of the NOMA NOWICKI KN-60 meat cutter Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: high-speed cutter Model: KN-60 Year of manufacture: 2024 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Bowl capacity: 60 L (60 dm³) Blade shaft speed: 200 – 6,000 rpm, continuously adjustable Mixing speed (reverse rotation): from -200 to -400 rpm Bowl speed: continuously adjustable Blade combination selection: Yes, choice of blade sets Cutting technology: “air cutting,” optimized bowl and blade geometry Unloading: hydraulic, adjustable unloading disc speed, optional stepped disc Control: microprocessor-based, memory for up to 40 processing programs Length: 1650 mm Knjdpjz S Iafefx Aqrjc Width: 1,310 mm Height with the cover lowered: 1,190 mm Height with cover raised: 1,850 mm Control cabinet dimensions: 800 x 800 x 300 mm Weight: 1,350 kg Hygiene: polished food-contact surfaces, flat surfaces angled at 3°, removable covers, and a bowl drain hole for easy cleaning Ergonomics: high product entry threshold, bowl rim, opening in the lid for adding spices during operation, quick access to blades, sound-dampening lid Replacement parts: included

Condition: used, Interroll roller conveyor, 2.17m, with drive The Interroll roller conveyor element is in very good condition. In addition, the roller conveyor has its own drive motor. Knedpfx Aqoicayksroc Series: 5600 Width: 410mm Length: 2175mm Pitch: 75mm Load capacity: 200kg per meter Drive voltage: 400 volts Complete factory closure sale, large selection of storage platforms, pallet racking, shelving systems, and paternosters. High-quality industrial machinery, lathes, grinding machines, and hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Uchida BC 10 Business Card Cutter The UCHIDA BC-10 business card cutter is a business card cutting machine that works in conjunction with any high-quality digital copier or printer to automatically, easily, and quickly produce professionally cut business cards. Whether you are a small business or a large corporation that produces hundreds of cards per day, the innovative features applied to the UCHIDA BC-10 will meet every need. Ksdpfoivd Aiex Aqrjnc • Designed exclusively for business cards from A4 paper • Up to 100 business cards per minute • Simple and fast operation Specifications Processing speed: 10 sheets per minute (100 business cards) Paper size: A4 Paper type: Offset, coated, glossy paper Tolerance: ±0.1 mm Item condition: used Scope of delivery: as shown (without sheet feeder & trash box) You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: new, ABB DCT880-W03XA DC Drive 160A 110kW Converter DCT880 DCT880-W03 Item condition: New (other) The item is new, but may have storage marks. - Technical data: - Type: DCT880-W03-leg, 3-phase - Rated current: 160 A - Input voltage: 110–400 V AC, 3-phase - Power: approx. 110 kW (at 400 V) - Weight: ~16 kg - Dimensions: approx. 370 x 271 x 270 mm Knjdpfxoy Ati Re Aqrec Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or information directly from the manufacturer. You can find more items - new and used - in our shop! International shipping costs on request! PD16

Condition: new, IDEAL 1080 Krug & Priester Lever-Action Paper Cutter   Ideal 1038 paper cutter   - Tool steel blade with a sharpening angle of 75° - Ideal for cutting paper, cardboard, linoleum, plastic and metal foils, thin sheets and other materials - Re-sharpenable blade set made of Solingen knife steel - Complete with a sturdy base frame and foot pedal - Fold-out side table, right - Side guide with a measuring scale in mm and inches - Infinitely adjustable back guide with a locking screw - Front guide with a locking screw and narrow-cut device - Scale knob for precise adjustment of the front guide - Printed DIN format scale from A3 to A6 - Fixed, transparent blade guard made of shatterproof plastic and blade locking device - Particularly stable blade bearing made of aluminum casting and double-bearing blade shaft for precise cuts - Extremely robust metal construction - GS tested safety mark - Brand quality, Made in Germany - Cutting length: 800 mm - Cutting capacity: approx. 20 sheets (paper 70 g/m²) - 4 mm passage height - Table size (W x D): 605 x 800 mm - Dimensions (H x W x D): 1215 x 670 x 1080 mm - Width with fold-out side table: 890 mm Knodpfx Aex R Scxjqrsc - Weight: 55 kg   Item condition: new ideal 1038 paper cutter   You can find more paper cutters in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Kedjzlgf Iopfx Aqronc Bush is a leader in the production of labeling machines and pushers. 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Tool Grinding Machine Michael Deckel S11 with Accessories and Tool Cabinet in Excellent Condition! Technical Data: >> Year of manufacture: 1992 >> Serial No.: 1673 Clamping Range: >> Tool slide mounting surface: 500 x 180 mm >> Max. tool diameter between centers: 130 mm >> Max. tool diameter with overhung mounting in universal dividing head: 620 mm >> Max. tool length between centers: 270 mm >> T-slot width on machine base: 12 mm >> T-slot width on grinding head, tool slide and accessories: 8 mm Travel Range: >> Working travels: Grinding stroke: 190 mm Grinding stroke for helical grinding: 190 mm Cross travel of tool slide: 100 mm Vertical feed grinding head: 325 mm Longitudinal adjustment of grinding spindle: 5 mm >> Coarse adjustment travels: Tool carrier: 220 mm Grinding head support: 800 mm Universal dividing head on tool slide: 330 mm >> Swivel angles: Grinding head support: 360 degrees Grinding head: 360 degrees Tool carrier: 360 degrees Kodpjxu E Nqofx Aqronc Grinding Spindle: Three-phase drive motor 1.1 kW at 2800 rpm Spindle speeds, stepless: 2000 to 10,000 rpm Max. grinding wheel diameter: 125 mm Max. cut-off wheel diameter: 200 mm Dimensions: Weight: 520 kg Dimensions (Depth x Width x Height): 800 x 1100 x 1760 mm Required space (including operation): 2.5 x 2.3 m Accessories and Equipment: 1 pc. Tool cabinet with contents: >> See pictures About the machine: Offered is a universal tool grinding machine of the brand Michael Deckel S11. The machine is suitable for grinding high-precision parts. With the S11, single parts and small series can be ground astonishingly quickly, economically and flexibly, all while providing maximum operating comfort. The Deckel S11 is in excellent condition and comes equipped with extensive accessories. Mechanically and electrically tested. Take the opportunity to view and test this machine under power on site.

Condition: good (used), Year of construction: 2005, operating hours: 63,102 h, machine/vehicle number: A0230A1162, control type: CNC control, controller manufacturer: Siemens, controller model: Sinumerik 840D, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 28,387 h, laser power: 6,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, TRUMPF Trumatic L3050 Laser Cutting Machine Year of manufacture: 2005 Control system: Sinumerik 840D Laser type: TLF 6000 Laser power: 6000 W Working area X: 3000 mm Working area Y: 1500 mm Knodpjx Ap A Rsfx Aqrsc Working area Z: 115 mm Max. speed X: 60 m/min Max. speed Y: 60 m/min Laser on hours: 63,102 h, Beam on hours: 28,387 h Max. sheet thickness (mild steel): 25 mm Max. sheet thickness (stainless steel): 20 mm Max. sheet thickness (aluminum): 15 mm Equipment: HI-LAS high-pressure cutting Cutting head with 5" lens Cutting head with 7.5" lens Quick-change cutting heads Sheet position detection system Laser positioning diode Programmable selection of cutting gases with stepless pressure adjustment Micro welds PMS plasma monitoring system Sprint-Las Head distance regulation (DIAS III) ContourLas AutoLas Plus Oil spray system Hydraulic pallet changer Work area lighting Longitudinal conveyor Sectional extraction system Filtration system Automatic shut-off Light barriers Tele-service RJ 45 3.5'' floppy disk drive User manual Used machine in good condition, inspected by qualified personnel. Machine available in March 2026.

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h Kjdpfx Aewh Tq Seqrsnc • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Condition: new, Year of construction: 2012, welding current 20 - 100 A cutting capacity max. 35mm mm Ksdpfxsw En E Es Aqrenc open-circuit voltage 250 V Required air-pressure min. 4 bar connected load 20 KVA connected load frequency 400 V weight 0,7 kg Dimensions (LxWxH) 1,0 x 0,6 x 0,8 mm Plasma cutting machine with cart - Includes 7m hose package - Spare nozzles

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and stepless feed, in very good CONDITION, CE compliant Technical Data: >> Year of manufacture: 1992 Machine No.: 2102-6209 >> Fixed angle table (newly planed) >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 Kodpfx Aqsxdi Ivoronc >> Coolant system >> Machine lamp >> Operating manual, spare parts plan About the machine: For sale is a universal milling machine Deckel FP1 with CE certification, in very good condition. The machine has very minimal backlash and all spindles can be moved easily. Even at maximum speed, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine via a plug, making transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine features rapid traverse in those axes as well. Another great advantage is the active 3-axis digital readout. With this Heidenhain path control, you can input dimensions, and the machine will automatically move to them. The FP1 was previously located in a training facility, where it was only used occasionally. The oil was changed, and the machine has been mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take the opportunity to inspect and test this machine under power at our premises.

Condition: used, Circular shears with motor drive FASTI Type 502 - 10 - 2 Machine no. No. 9252 009 Year of construction 1992 Material thickness max. 2 mm (400N/mm²) Maximum circular blank diameter 1000 mm Minimum blank diameter 100 mm Cutting shaft speed 60 and 120 rpm Cutting speed 12 and 24 m/min. Blade holder Ø 20 mm Knife diameter Ø 65 mm Projection of the clamping plate 720 mm Projection of the cutting wheel 280 mm Motor power 1.1 / 1.4 kW Mains connection 380 Volt, 50 Hz - 2 motor speeds - Mechanical clamping tip - Scale on the clamping bracket - electric foot switch - 1 set of cutting blades - Operating instructions with electrical diagram in PDF format Space requirement L x W x H 1600 x 660 x 1350 mm weight 320 kg Knedpou Rimmjfx Aqroc good condition

Year of construction: 1988, condition: reconditioned (used), Grinder type DURE Cel The grinder is designed for sharpening woodworking tools such as: circular, straight and helical tooth milling cutters; milling heads, circular saws with carbide blades, planer blades; chisels. It is used in vegetable sawmills for woodworking. Dure grinder Technical and operating data Supply voltage: ~3 x 400 V; 50 Hz Largest tool travel of the tool carrier: 660 mm Largest travel of the cross slide: 160 mm Largest horizontal travel of grinding head: 140 mm Rotation of grinding head in horizontal plane: 360° Rotation of the grinding head in the vertical plane: ± 30 ° Largest vertical displacement of the grinding head: 240 mm Spindle speed: 3500 or 6000 min-1 Overall dimensions of the sharpener (L x W x H): 1380x830x1460 mm Weight of the grinder (with accessories): 515 kg Largest diameter of sharpened cutters: 250 mm Largest diameter of sharpened blades: 600 mm Knsdpfjuuk Dtjx Aqrjc Diameter of shanks of sharpened cutters: max. 20 mm Maximum length of sharpened blades: 640 mm Year: 1988

Condition: used, Cutter Duker Rex Hydro 65 Made of stainless steel Distribution cabinet made of special steel, inside the machine Control box integrated in machine housing Noise-canceling cover Knedpfxowi Ixms Aqrsc Bowl capacity: 65 liters Electric power: 15kW Voltage: 380V / 50Hz 3 N/PE

Condition: used, Year of construction: 2006, centre height 175 mm centre distance 300 mm number of spindle speeds 2.000 - 8.000 control SIEMENS - 840 D machine weight ab. 7.500 kg surface area 1.000 x 270 mm number of T-slots 3 groove width 12 H7 mm flute distance 50 mm spindle diameter in front bearing 55 mm Knjdpfx Ajmd Didjqrsc Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1

Condition: new, diameter 32 - 50mm der Buchsen length 350 mm groove width 10 - 12 - 14 mm weight 20 kg Kodpfx Asupxk Doqrenc dimensions 400 x 150 x 250 mm Groove widths: 10 - 12 - 14mm Diameter of the guide bushes: 32 - 34 - 35 - 36 - 38 - 40 - 42 - 44 - 45 - 46 - 48 - 50mm

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Overhauled TOP Technical data: >> Machine no. 53819/08 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Feed 2 axes >> Drive power .:1 / 1.5 KW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill and horizontal quill - SK40 >> Spindle brake >> Tightening system S20x2 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display from RSF Elektronik Ksdpfsvb Ud Usx Aqrsnc >> Coolant device >> Machine feet To the machine : We are offering a Deckel FP1 universal milling machine in very good condition. The Deckel has very little crank play and all spindles can be moved easily. An oil change has been carried out. The FP1 was overhauled by Huttelmaier in 2006 and has been used very little since then. The digital display from RSF makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: manual, actuation type: manual, bending angle (max.): 130 °, overall weight: 430 kg, warranty duration: 24 months, Sheet Metal Bending Machine / Brake - Bender 3100mm - RG-C 3007 + Cutter RC-0.8 Kedpfx Asv Ax N Doqrsnc 3-Meter Sheet Metal Bender – Professional Solution for Roofing contractors Our 3-meter sheet metal bender is a high-quality machine designed for roofing contractors and companies specializing in sheet metal processing who value precision, durability, and ergonomic operation. With its robust construction and precise craftsmanship, it ensures reliability and ease of use even under intensive working conditions. Key Features: ✅ Working length: 3 meters – allows bending of large metal sheets, increasing work efficiency. ✅ Sturdy steel construction – guarantees longevity and resistance to deformation. ✅ Precision bending – perfect for producing roofing elements, sheet metal trims, and gutters. ✅ Easy operation – an intuitive control mechanism enables quick and accurate sheet shaping. ✅ High clamping force – stabilizes the material, ensuring uniform bending along the entire length. Our 3-meter sheet metal bender is an indispensable tool on any construction site, improving the quality and efficiency of roofing work. 3-Meter Sheet Metal Bender – Technical Specifications Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Maximum clamping beam lift height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Heavy-duty steel frame ensuring durability and precision Accessories (included): Back support arms for large sheets Functional protractor for precise angle bending Roller cutter / shear - for quick and precise cutting of sheet metal along the working length of the bending machine Optional accessories (not included): Swivel castors with brake - (4 pcs.) - €160.00 This 3-meter sheet metal bender offers precision, durability, and ease of use, making it an ideal choice for roofers and professionals who demand reliable performance in sheet metal forming. Contact us for more information and to find the perfect model for your needs! Shipping costs on request.

Year of construction: 2014, condition: new, DC-Sputtering Power Supply ADL HX 300/1000 Year of construction: 2014 (New, never used) Knsdpfx Aqoz Nycgorsc Power: 30 kW (see photo for more technical details)