Used Plate Trolley for sale (12,559)

Year of construction: 2022, condition: used, The plate swivel fixture simplifies handling when it comes to moving plates from a vertical to a horizontal position. The receiving frame is hydraulically adjustable in height and can also be swiveled. Support rollers facilitate movement in the horizontal position. Four swivel casters guarantee safe internal transport. Technical data: Support height: • vertical: approx. 340-120 mm • horizontal: approx. 1200-890 mm Max. plate size: 5200 x 2100 mm Bedpfx Asv T Ilvof Hslk Load capacity: 250 kg Location: Bad Wimpfen

Year of construction: 2019, condition: used, General Information The MobyLift is a practical tool for ergonomically lifting, transporting, and positioning products such as doors, table tops, and other panels. From an operational perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, and prevents back problems, thereby reducing work-related absences. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our expertise to create a practical tool. The MobyLift MC-120-H consists of the following modules: - Mobile base frame - Electric lifting and tilting system - Automatically operating vacuum unit - Wireless electric control The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into several portable modules after it is switched off. This makes it very convenient to load and unload the MobyLift or move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a battery level indicator, which allows the battery status to be continuously monitored. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilting angle, front to back: 37°, electrically operated - Swivel angle - head joint on both sides: 90° - Rotation angle - head joint: 360° continuous Bjdpjv Dauwjfx Af Holk - Lateral displacement: 7 cm - Weight: 150 kg, can be disassembled into modules Storage location: Nattheim

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. Bljdpfxev S Syne Af Hjk As new condition. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: good (used), Approximately 100 mobile pallet trucks for Euro pallets and industrial pallets – used: Price for a minimum order of 10 units, ex works: €75.00 (net)! Price for a minimum order of 30 units, ex works: €65.00 (net)! Manufacturer: unknown Blsdpfx Afozp Rx Hj Hek Type: unknown Year of manufacture: unknown Dimensions: approx. 125x105x28 cm Mobile, 4 rollers (2 of which are locking brakes) Condition: good Available: immediately Location: Leipzig

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks Bljdszn Ahdopfx Af Hok

Condition: excellent (used), Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 1,770 mm, total length: 630 mm, total height: 1,230 mm, empty load weight: 95 kg, overall weight: 95 kg, Ingredient station / ingredient cart with 12 containers for ingredients with a work surface on top for weighing Bedpfx Ajzpg Iqsf Helk robust design reinforced, welded construction stainless steel design, mobile Dimensions: 1770 x 630 x 1230 mm, WxDxH Used equipment, cleaned Come and visit us!

Condition: used, Year of construction: 2013, length / mm width / mm height / mm Becker Vacuum Clamping System U 3.6 S-09 – 230 V – Year 2013 – Complete with Vacuum Pump, Vacuum Tank & Vacuum Table For sale is a complete Becker vacuum clamping system consisting of a Becker vacuum pump, model U 3.6 S-09, a vacuum tank (reservoir), a vacuum clamping table, and the mounting accessories shown in the photos. The system was previously used in an industrial environment and is ideal for CNC routers, machining centers, woodworking, plastics processing, fixture holding, and other vacuum clamping applications. Technical Specifications Manufacturer: Becker Model: U 3.6 S-09 Year of Manufacture: 2013 Power Supply: 230 V, Single Phase Motor Power: 0.30 kW (50 Hz) / 0.36 kW (60 Hz) Speed: 1380 / 1650 rpm Inlet Capacity: 6.4 / 7.4 m³/h Bledpfx Afszn Aius Hok Maximum Vacuum: 10 mbar Protection Class: IP54 Scope of Delivery Becker vacuum pump U 3.6 S-09 Vacuum tank / reservoir Vacuum clamping table Clamping rails Mounting and clamping accessories (as shown in the photos) Condition The vacuum clamping system is in good used condition with normal signs of wear consistent with industrial use. It was removed from a fully operational machine. The sale includes everything shown in the photographs. Inspection is welcome by appointment. Shipping or collection can be arranged by mutual agreement. Plate size: 440 x 280 x 50 mm

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: Bljdpfxeznngxs Af Hsk - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)

Condition: used, Year of construction: 2008, Product Information "4-Roll Round Bending Machine" with Bombing Function Type / Model: Nossebro 8268 30/20 Condition: Used Year of Manufacture: 2008 Technical Data Maximum Working Length: 3,040 mm Blodpfx Aezp Ip Aef Hek Sheet Metal Thickness (Max. Capacity for Construction Steel St 37): 2.0 mm Number of Rolls: 4-Roll System (Arranged Asymmetrically/Symmetrically) Driven Rolls: All 4 rolls individually driven Roll Diameter (Top Roll): approx. 110 mm to 140 mm Motor Power: 2.2 kW Power Connection: 400 V / 3-Phase Equipment: CNC Control: Mylock 100 Inquiry Item: Transportation costs will be provided in an individual offer.

Condition: new, Panel swivel cart Bjdpfxew I U A Ie Af Hjlk new suitable for Fimal Concept 350 pressure beam panel saw complete including 4 swivel castors (2 lockable) 12 all-direction rollers and a foldable support table Availability: short-term Location: Hochheim

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top Bsdpfxozpbrqo Af Helk - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Bsdpoznnd Rsfx Af Helk Marble table as a surface plate. It was the bottom part of a Zeiss measuring machine. Size is 2750 x 1400 x 340 mm.

Condition: used, length n.n. mm Blodpfx Asznndwsf Hok width n.n. mm total power requirement 0 kW weight of the machine ca. n.n. t dimensions of the machine ca. n.n. m Some spotting plates in different sizes, without table legs. Price per sqm. We have following sizes: 1500 x 1000 mm 1000 x 1000 mm (2 pieces) 1000 x 800 mm 600 x 500 mm 400 x 300 mm 210 x 130 mm round with diameter of 520 mm.

Condition: good (used), Year of construction: 1996, sheet width 3050 mm plate thickness 6.5 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable 750 mm work height max. 770 mm no. of strokes 11 - 22 Hub/min cutting angle 0.5 - 3.0 ° down holder 18 Stück Control SC 5 voltage 380 V engine output 11.0 kW weight of the machine ca. 5000 kg Blodpfxozndq Ts Af Hsk range L-W-H 3950 x 1750 x 1720 mm Features: - Electro-hydraulic / slide-guided panel shear - HACO NC control, Model SC 5, front left * Preset positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction of the backgauge * Emergency stop switch - Electromotor-driven backgauge, mounted on ball screws - Hydraulic sheet metal hold-down devices - Front finger guard - 1x long side stop - 1x freely movable foot switch - Operating instructions in German (PDF)

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Bedpfjzp Exzox Af Holk Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: excellent (used), Fetra transport trolley Bedpfx Ajzmuzgef Holk Width 800 mm Length 1250/1370 mm with handle Height 900 mm Tire diameter 200 mm

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t Blodpfxozmy Tbj Af Hsk required space 16000 x 5000 mm

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Bledpsthuzpofx Af Hjk Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Fixed angle clamping table, fixed machine table, clamping angle, angle table for milling machine Clamping surface: 700 x 260 mm Table size: 785 x 310 mm (external dimensions) Slot width: 12 mm Slot spacing: 50 mm - for table mounting surface at 90° Bodoznn Hlspfx Af Hslk - Table top with 5 T-slots - Mounting surface 90° = 600 x 195 mm, hole spacing center-to-center 560 x 125 mm with Ø 12 mm elongated hole, 12 mm guide slot Dimensions L x W x H: 785 x 320 x 263 mm Weight: 80 kg Good condition

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES Bedpfxsza Eaus Af Hjlk The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: excellent (used), Year of construction: 2001, sheet width 4000 mm plate thickness 16 mm total power requirement 37 kW Bsdpfx Afoy Diahj Hjlk weight of the machine ca. 20 t dimensions of the machine ca. 4700 x 2100 x 2000 mm

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t Bedpfszbhqxsx Af Hjlk -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: new, Unused Alfa Laval model AQ4T-BFG approximately 15sqmt heat transfer area 316L stainless steel plate heat exchanger. Unit rated 12 bar design pressure at 150 deg.c. Blodpfxjzimvuj Af Hjk

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Bljdpfxjygm Tio Af Hjk Cutting height 1.800 mm machine weight ab. ca. 600 kg kg

Condition: refurbished (used), Year of construction: 2014, travel distance X-axis: 12,000 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 625 rpm, spindle diameter: 200 mm, Schiess AR-601/142 – completely overhauled in 2014 Main data: X (longitudinal travel of column): 12,000 mm Y (vertical travel): 4,050 mm Bjdjyxa E Rspfx Af Helk Drilling spindle travel: 1,600 mm Milling spindle travel: 900 mm Spindle diameter: 200 mm Spindle power: 91 kW Spindle speed: 1.18 – 625 rpm Capacity: Max. drilling diameter: 1,600 mm Max. machining diameter: 3,000 mm Lifting capacity: 120 tons Rotary table: Diameter: 3,000 mm Max. load: 100 tons Accessories included: Steadies Clamping plates: • 2 units – 8 x 5 m • 1 unit – 6 x 3 m Angle plates