Used Poland for sale (1,088)

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Gsdpfx Asfy T H Ijfnjbh Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, functionality: fully functional, overall weight: 105 kg, Year of construction: 2025, Slurry-free, steerable boring machine ALUSTEER – a modern steerable thrust-boring machine Gbodpfjxxhzwox Afnsh

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Gsdpfx Afsiimw Aensbh Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: new, Year of construction: 2024, functionality: fully functional, operating pressure: 6 bar, total height: 1,270 mm, total width: 1,500 mm, pressure: 6 bar, type of input current: AC, empty load weight: 300 kg, input voltage: 230 V, heating capacity: 9 kW (12.24 HP), water tank capacity: 300 l, rotary table diameter: 1,000 mm, table load: 300 kg, table width: 1,000 mm, The ROT1000 rotary basket washer is a combination of modern technology and precision workmanship at every stage of the washer's development - this is, in short, the definition of an innovative design that will facilitate the process of washing large-size parts. The rich equipment of the device will provide us with high efficiency, economy and reliability at the workplace. A motor-driven rotary basket and spray nozzles increase the efficiency of the washing process. Parts undergoing the process are placed on a circular basket that rotates around its own vertical axis. The fully automatic control panel controls the work of the washer. STANDARD EQUIPMENT OF THE WASHER: Gedpoq I N S Hjfx Afnebh - Sensor for disconnection of the closing lid when opening it during the washing process, - Liquid level sensor in the tank, protecting against dry operation, - Liquid temperature sensor, - One adjustable, stainless steel spray arm from the renowned spraying company System - Mechanically rotating basket, - Dual filtration, - Coarse insoluble impurities filter (1mm mesh filter), - Drain valve

Condition: like new (used), Year of construction: 2020, For Sale: Brushing Machine CR24 Manufacturer: ELDRUT SYSTEM, Kielce, Poland Gbsdewu Di Eepfx Afnjh Model: Brushing Machine CR24 Serial Number: 9/2020 Year of Manufacture: January 2020 Power Supply: 400V, 50 Hz Certification: CE The machine is in very good condition, ideal for industrial brushing applications. Reliable construction according to European standards.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 100,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 Gsdpslnllbjfx Afnjbh The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Year of construction: 1987, condition: new, New original spare parts Huta Zigmunt 3 500 … 17 500 kgm. Gbodpfx Afolnlmvenoh

Condition: new, Year of construction: 2025, NEW CONTAINER / ONE WAY / Year of manufacture 2025 +Lock box +Forklift pockets Color: RAL 5010 , RAL 7016, RAL 7035, RAL 6007, RAL 9010, RAL 7042, RAL 7015 Gbodpfx Ajwu Uuxofneh

Condition: used, Year of construction: 1990, Engine power: 2 hp Gsdsx Edl Sepfx Afnobh

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Gjdpfjxf Uxcox Afnjbh

Condition: good (used), Year of construction: 1970, Manufacturer: Metalexport Poland Year of manufacture: 1970 Type / Model: TUE 40 Machine number: 8604 Control: conventional Distance between centers: 1,500 mm Spindle bore: 38 mm Gbodpfxev N Tu Ie Afnoh Center height: 210 mm Turning diameter over bed: 420 mm over carriage: 240 mm in gap: 600 mm Speed range: 22.4 to 1,000 rpm Feed: Connection: kW Accessories/Equipment: fixed and traveling steady rest, 4-way tool holder, 200 mm 3-jaw chuck, coolant system Condition: good Weight: approx. 2.5 t Dimensions: 2,800 x 800 x 1,200 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 10089060/30042621, total length: 5,300 mm, total width: 2,100 mm, total height: 2,300 mm, year of last overhaul: 2024, The machine was last overhauled in 2024! TECHNICAL DETAILS Material loading area: 4,000 mm x 2,000 mm MACHINE DETAILS Dimensions (L x W x H): 5,300 x 2,100 x 2,300 mm Gbsdpfx Aeyfv Exsfnsh EQUIPMENT Service and inspection history available from 2019

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 28,459 h, machine/vehicle number: A0220A2141, controller model: Siemens Sinumerik 840 D, laser power: 4,000 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Gjdpfsyilfajx Afnjbh Working area: 3,000 x 1,500 mm Maximum sheet thickness, mild steel: 20 mm Maximum sheet thickness, stainless steel: 15 mm Maximum sheet thickness, aluminium: 10 mm Laser power: 4 kW MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser type: TruFlow 4000 Laser power: 4 kW Type: CO2 Dimensions & weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours (as of January 2026) Beam-on hours: 28,459 h Laser-on hours: 51,970 h EQUIPMENT TruTops license (additional charges may apply for license transfer to Trumpf)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X396F51535, Year of construction: 2015, operating hours: 6,533 h, load capacity: 8,000 kg, lifting height: 3,500 mm, mast type: duplex, power: 72 kW (97.89 HP), empty load weight: 16,230 kg, TECHNICAL DETAILS Gbodpfx Afsyifkponjh Load capacity: 8,000 kg Lifting height: 3,500 mm MACHINE DETAILS Mast type: Duplex Power: 72 kW Net weight: 16,230 kg Operating hours: 6,533 h EQUIPMENT Solid rubber tires

Condition: excellent (used), CATALOG NUMBER 7714 TECHNICAL DATA - Machined diameter range: 40-140mm - Minimum input material length: 750mm - Allowance for machining (on diameter): max 50mm - Cutter head drive motor: 22kW - Infinitely variable feed speed + forward/reverse Gbjdpfx Aoyh H Elofnjh - Feed motor: 2.2kW - Pneumatic cylinders: 6 pcs Sequence: - Infeed roller - 3 toothed feed rollers - 3-knife cutter head - 3 smooth outfeed rollers - Outfeed roller - Extraction port diameter: 200mm - Brake - Dimensions (L/W/H): 3300x1450x1750mm - Weight: 2100kg ADVANTAGES – Manufactured in Poland – DTR documentation – Used rounding machine – Excellent condition Net price: 78,900 PLN Net price: 18,780 EUR depending on the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills Gjdpfx Afoyh H Dnjnobh - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, Gedpfxoyi Ezkj Afnjbh - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, Used stainless steel clarifying filter press by Seitz Orion type OF 100/150. Press has 154 stainless steel filter plates with dimensions 1000 mm x 1000 mm and two end plates. Filtration surface approx 310 m2. Machine has hydraulic closure. Mounted on stainless steel frame. Includes feeding connections, manometers and local control panel. Specifications: Material: Stainless steel Plate Size: 1000 mm x 1000 mm # of Plates: 154 stainless steel filter plates Eyes: 4 Plate Type: Clarifying Gbjdoyi Eygjpfx Afnoh Surface Area: 310 m2 Closure: Hydraulic

Condition: used, Used stainless steel two decks tumbling screen by Allgaier-Werke Gmbh & Co KG (Germany) model TSM 950/3. Body and contact parts made of stainless steel. Machine has 2 decks with diameter 950mm and has cleaning rubber balls on 2 deck. Central top inlet and 3 side outlets. Machine is driven by ele. motor with power 1.5 kW, 1430 rpm 220/380 volts, 50 Hz. Screen is mounted on carbon steel based. The set with machine includes a third deck with balls without a screen. Gbodpfxjyi Ex Ne Afnjh

Condition: good (used), mileage: 368,800 km, power: 309 kW (420.12 HP), first registration: 05/2010, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro5, suspension: air, loading space volume: 15 m³, Year of construction: 2010, Equipment: AdBlue, EBS, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, trailer coupling, - Aluminum fuel tank - Front work lights - Brake booster - Air conditioning - Rear-view camera - Sliding roof - Side skirts Gbodpfx Aex Hp Hajfnjh - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) - Central lubrication Volvo FM420, Euro 5, I-Shift, 15m³, 368,600 km, suction truck, 2010, *9,000 kg front axle, 3rd axle liftable and steerable, remote control, rear-view camera, first registration 11.05.2010, air conditioning, electric windows, Webasto (auxiliary heater), suspension: air / air, ABS, total truck length: 9400 mm, total height: 3250 mm, overall width: 2550 mm, distance between 1st and 2nd axle: 4300 mm, tyres: 315/80/22.5 with 90% tread front & 315/80/22.5 with 80% tread rear, electric windows, radio/CD player, diesel tank 330 liters, VBG (trailer coupling), 1 owner from new, last technical inspection at 368,650 km (16-10-2025)… The truck is clean and in full working order! *Body by “ROLBA”*: 15 m³ (1st compartment: 15 m³) vacuum/pressure, remote control, Italian pump (PM200)… The body is clean and fully functional! *Price:* € Stockholm, Sweden. For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * Wir sprechen Deutsch * .---- * Freight costs for this truck to various destinations * ----- * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only for the purchase of this truck. * -----. _____ _____ General information Applications: Cleaning, soil drainage, land management, and recycling Technical Information Engine displacement: 12,777 cc Transmission Transmission: I-Shift, semi-automatic gearbox Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/65R22.5; Max. axle load: 8,000 kg; Steerable; Tyre tread left: 90%; Tyre tread right: 90% Rear axle 1: Tyre size: 315/80R22.5; ...

Condition: used, Year of construction: 2008, MORI SEIKI NL3000MC/700 CNC lathe Control: MSX850III mapps C axis, driven tools Year: 2008, Japan 12" Kitagawa BB212 chuck Spindle bore: 90mm Max turning diameter: 420mm Max turning length: 713mm 12-station turret Programmable tailstock Renishaw tool probe Gjdpfx Aeyifmqofnobh Machine documentation Chip conveyor with tank and pump Tool holders The machine is in very good condition

Condition: good (used), mileage: 153,950 km, power: 353 kW (479.95 HP), first registration: 06/2013, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,900 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space volume: 16 m³, Year of construction: 2013, Equipment: AdBlue, EBS, air conditioning, cruise control, electric window regulation, fog lights, navigation system, parking heater, - Aluminium fuel tank - Brake booster - High beam headlights - Speed limiter - Air conditioning - Leather interior - Leather upholstery - Air horn - Rotating beacon - Reversing camera - Sun visor - Stability control - Auxiliary heater - Toolbox - Xenon lighting - Power take-off (PTO) Scania G480, 8x4, Euro 6, combination sludge/water vehicle with recycling unit, stainless steel tank, year of manufacture 2013 Further information: Engine: 480 HP Transmission: Opticruise (with clutch pedal) Suspension: air-air Mileage: 153,950 km Wheelbase: 3900 mm Emission standard: Euro 6 First registration: 13.06.2013 Electric windows and mirrors Air conditioning Reverse camera Navigation system Webasto (cab heater), engine pre-heater, etc. Gjdpfx Afoyf H Tmonebh Last technical inspection at 150,600 km (07.02.2025) Last maintenance at 149,500 km The truck is in good and fully functional condition. Body: Wiedemann & Reichhardt, Super 2000 Remote control, sludge suction (stainless steel sludge tank 10,000 l), Wiedemann KW3000, speed: 1000, m3/h: 3000, vacuum: 400 bar (new vacuum pump, year 2020) High-pressure flushing system with stainless steel water tank 6,000 l, URACA, Webasto Thermo 300... operating hours: 2,128 hours Recycler with 4 cyclones Overall assessment: General condition assessment (1-5): 4.5 Condition of front tires: 90% (or new tires at extra cost) Condition of rear tires: 90% (or new tires at extra cost) Additionally: All documents required for registration in all EU countries available (all from Wiedemann & Reichhardt and Scania). Price: € Stockholm, Sweden For further information and photos, please contact us by phone or email. We are also available via WhatsApp and Viber. • We speak English * Vi talar svenska * Mówimy po polsku * Hablamos español * • We speak Ukrainian * We speak Russian * Vorbim în limba română * We speak German * .----- * Shipping costs for this truck to various destinations * -----. * Stockholm (Sweden) – Gdansk (Poland) €450.00 * Stockholm (Sweden) – Antwerp (Belgium) €1,450.00 * Gothenburg (Sweden) – Kiel (Germany) €450.00 * Gothenburg (Sweden) – Ghent (Belgium) €590.00 * Gothenburg (Sweden) – Zeebrugge (Belgium) €590.00 * Gothenburg (Sweden) – Antwerp (Belgium) €850.00 * Gothenburg (Sweden) – Naples (Italy) €4,000.00 * Gothenburg (Sweden) – Bilbao (Spain) €3,500.00 * Gothenburg (Sweden) – Barcelona (Spain) €4,000.00 * Gothenburg (Sweden) – Leixões (Portugal) €2,500.00 * Gothenburg (Sweden) – Piraeus (Greece) €3,000.00 * Gothenburg (Sweden) – Iquique (Chile) €4,000.00 * Gothenburg (Sweden) – Jebel Ali (UAE) €4,000.00 * Gothenburg (Sweden) – Sohar (Oman) €4,000.00 * Gothenburg (Sweden) – Jeddah (Saudi Arabia) €4,000.00 .----- * These prices apply only to the purchase of this truck. * -----.

Condition: excellent (used), Catalogue number 7736 TECHNICAL DATA - shaft width: 410mm - number of knives: 4 - noise-damping comb at the shaft - table length: 2530mm - brake - cast iron tables - both tables adjustable - original, angle-adjustable guide - motor: 3kW - extraction port diameter: 140mm - dimensions L/W/H: 2530x850x1350mm - weight: 680kg ADVANTAGES – manufactured in Poland – 4-knife shaft Gbsdpoyg Niyofx Afnsh – brake – upper control panel – noise-damping comb at the shaft – DTR documentation – used jointer, in very good condition Net price: 12,900 PLN Net price: 3,070 EUR depending on 4.2 EUR rate (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7887 Gedpfoyg Il Tox Afnebh TECHNICAL DATA - Max. saw blade diameter: 350mm - Saw blade bore diameter: 30mm - Max. cutting height: 100mm - Main blade adjustable up/down and at an angle - Saw blade guard - With side trolley - Cutting length on trolley: 920mm - Cutting width with fence: 600mm - Main motor: 4kW - Table dimensions: 102x900mm - Mitre gauge - Extraction port diameter: 110mm - Dimensions (LxWxH): 2110x1370x1000mm - Weight: 550kg ADVANTAGES – Made in Poland – With side trolley – Mitre gauge – Used saw, very good condition Net price: 7,900 PLN Net price: 1,880 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: used, LNS Servo Load 3, year of manufacture 2012 Gjdpfoyh Rkrsx Afnobh