Used Polymer Systems for sale (33,740)

Condition: used, Year of construction: 2011, Single-end machine for cleaning glass bottles. Additional title: Bottle washing machine Capacity: 3000 bottles/h Length: 4,43 m Width: 2,60 m Gjdsy Nm Sxspfx Amyjbl Height: 2,52 m Base construction: Single-end machine Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Condition: used, Year of construction: 2004, The repackaging system is used to unpack glass bottles from pallets containing full module boxes, repackage them into ‘open basket’ carrier boxes holding four bottles, and repack them into pin-partition crates with palettising. The system consists of the following individual machines: 1. Depalletising of full module crates / repalletising of empty module crates: Here, pallets containing full module crates are fed in and destacked, whilst empty crates are stacked and transported out. 2. Repackaging machine: Here, 20-unit module boxes are unpacked, 4-unit carrier cartons are unfolded and filled with bottles/packed. 3. Packing into pin-partition crates and palletising: Here, the 4-unit carrier cartons are packed into pin-partition crates, stacked onto pallets, and transported out of the system. Additional title: Repackaging of full pallets containing modular crates into pallets containing pi Capacity approx.: 200 crates/h Gjdpfxoy Nm Hvj Amysbl Formats: Bottle crate (400 x 300 mm) on Euro pallet (1200 x 800 mm) Running direction: right -> left Operation / Control: on-site control unit / Siemens PLC Position: free standing Base construction: Square tube construction bolted to the floor Features: depalletizing, unpacking, bottle transport, crate transport, carton unfolding, packer for the bottles in the cartons, packer for the cartons in the quill boxes, palletizing of the full crates, pallet infeed and outfeed, protective grilles, switch cabinets, control device Layer patterns: 2x2 bottles/carton, 2x4 crate, 5 layers / palet

Condition: used, mileage: 592,683 km, power: 280 kW (380.69 HP), first registration: 02/2004, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 4x2, wheelbase: 5,520 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro3, suspension: air, total length: 9,700 mm, total width: 2,550 mm, total height: 3,850 mm, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 710 mm, Year of construction: 2004, Equipment: ABS, air conditioning, cruise control, electric window regulation, power mirror, tail-lift, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Tachograph (control device) - Fixed - Halogen lights - Tail lift - Manual - Sleeper cab - Fabric - Central lubrication = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 8,250 kg, Gross weight: 18,000 kg, Total fuel tank capacity: 510 liters, Trailer coupling, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Central lubrication, Cabin type: Sleeper cab, Cruise control, Tachograph (control device), Air conditioning, Electric windows, Electric mirrors, Color: White, Heated mirrors, Lighting type: Halogen lights, Engine power: 280 kW (375 hp), Fuel: Diesel, Emission standard: Euro 3, Transmission type: Manual, Gearbox manufacturer: Scania, Gears: 6, Clutch pedal, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Seat configuration: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Tail lift, Tail lift version: fold-under tail lift, Tail lift capacity: 1,500 kg, Tail lift manufacturer: B.A.R. Cargolift, Tail lift material: Aluminum, Spare wheel, Spare wheel tread: 3 % = Further Information = Transmission Transmission: SCA, 6-speed, manual transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Gsdpfxey Hqlwj Amyobl Axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 11 mm; Tire tread right: 12 mm Axle 2: Tire size: 295/80R22.5; Twin tires; Inner left tire tread: 15 mm; Outer left tire tread: 15 mm; Inner right tire tread: 15 mm; Outer right tire tread: 15 mm Weights Unladen weight: 8,250 kg Payload: 9,750 kg Gross vehicle weight: 18,000 kg Functionality Tail lift: B.A.R. Cargolift, fold-under flap, 1,500 kg Loading floor height: 130 cm Condition General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our offering covers all European brands and all years and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-moving stock • Recognizable quality • Good prices • Honest dealing • We speak many languages • We understand our customers • Support with import and transport • (Export) registration handled quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: used, machine/vehicle number: 008126, Max. panel width: 1000 mm Max. panel length: 2000 mm Length of conveyor: 7000 mm Panel return for edgebander: Right Gbedpfx Amox A Tcnsyjl

Year of construction: 2011, condition: used, Make: B&M, Year of manufacture: 2011, 2x degreasing, 2x rinsing, 1x residual water dryer, heating medium: natural gas, wastewater treatment unit, make Loft, burner, make Buderus, desalination unit, heat exchanger, switch and control cabinets, platform system, accessories Gsdox R D Ndepfx Amysbl +++ Attention: Machine is part of an online auction! +++

Condition: used, Year of construction: 2016, Make: GOM, Model: Atos III Plus, Scanbox, Year of manufacture: 2016, measuring volume 550 x 550 x 550 mm³, comprising: Atos InSpect 2023 measurement software, ATOS III scan head, Fanuc M20iA robot module, rotary table, clamping plate 1,500 x 1,000 mm, safety light curtains, pull-out rack (2x 3 drawers), contents: grid plates, gauges, tripods, tool trolley (manufacturer: Atorn), climate cabin (10 x 6 x 6 m), roller door, entrance door, lighting, rolling setup table (manufacturer: Witte), dimensions 2,400 x 1,800 x 200 mm, 1 lot of Witte clamping devices. Gbodpfxjx R Dv De Amyel +++ Attention: The machine is part of an online auction! +++

Condition: used, Dear Sir or Madam, We are pleased to offer the following equipment for sale: Keyence VL-500 measuring system. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Gjdey Iaa Topfx Amyjbl Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall igned for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans Gjdpfx Aeywd I Tsmyebl - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: used, Year of construction: 1978, Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters. Additional title: Intermix system with carbonisation unit Water output: 22575 l/h Fruit juice output: 4907 l/h Gbjdpfx Aex T Aqfomysl Operation / Control: Control panel, manual Material: Lacquered mild steel frame, stainless steel product contacts Position: Free standing Base construction: Open frame construction with spherical feet Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Year of construction: 2000, condition: used, Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h Additional title: Bottle washing machine Capacity: 39000 Bottles/h Length: 12700 mm Width: 4700 mm Height: 3500 mm Godpfx Ajw Taxfomyebl Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW Operation / Control: Simatic S7-300 Position: free standing Base construction: Single-end machine, self-supporting housing on dome feet Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station Layer patterns: 22 bottles per basket row

Year of construction: 1994, condition: used, Crate washer Model: RWZ-30-Sonder with high-pressure cleaning, without brushes Year of manufacture: 1994 Performance: 1500 crates/h Additional title: Crate washing system Capacity: 1500 Crates/h Length: 7600 mm Width: 1500 mm Height: 2700 mm Gedpow Tax Eofx Amyobl Formats: Module box in longitudinal run Material: stainless steel Position: free standing Periphery: 2 Kastenwender, 1 Scherben-Ableitkasten

Condition: used, Externally mounted cooling unit with 2 fans and insulated 400 l glycol storage tank. Coolant: glycol Refrigerant: R-410 A Additional title: externally mounted cooling unit with glycol buffer storage tank Cooling capacity: 14 kW Pressure compressed: 4,2 bar Pressure relaxed: 1,9 bar Gross volume glycol buffer tank: 400 l Power: 5,5 kW Current: 20 A Voltage: 380-415 V Frequency: 50 Hz Features: Cooling unit with 2 fans, glycol storage tank, piping, control system Gsdpfx Asxwy D Usmysbl

Condition: used, Year of construction: 2010, PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 pressure-temperature ratio controller Type BMS7 The controller including control cabinet is to be completely renewed when the machine is purchased. Additional title: mixing unit 1983 - 2010 Capacity approx.: 150 hl/h Mixing and carbonating Length: 2,9 m Width: 2,5 m Gbjdpfxsxbn Hro Amysl Height: 2,5 m Weight: 3000 kg Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7 Material: Stainless steel Position: Frame mounted Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel)

Year of construction: 1983, condition: used, Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually Additional title: with switch cabinet and CIP tank Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system Gbjdpfx Amevcqt Uoyel

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Gbodpfovcqz Ejx Amyjl Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: used, Year of construction: 1989, System for the secondary filtration of beer after the Kieselguhr filtration. Operating pressure: 10 bar Gbedpfxjw Tmqbj Amyjl Operating temperature: 140 °C Volume: 169 l Length: 4,10 m Width: 1,30 m Height: 2,0 m Weight: 1700 kg Material: stainless steel Position: standing Base construction: Frame Features: Trap Filter, Beer filter, Water / CIP Filter, Unit for filter flushing and chemical regeneration.

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Gjdpfxsvu Tthe Amyebl Capacity: 30000 bottles/h Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a professional vacuum conveyor unit from KOCH Technik (Type A130). This device is designed for the automatic conveying of plastic granulate or regrind directly to an injection moulding machine or extruder. The unit is distinguished by its extremely robust cast aluminium construction, built for demanding industrial use. Thanks to the quick-release system (clamping ring), the unit can be opened tool-free for cleaning or maintenance purposes. Technical data: Voltage: 24 V DC Type: A130 Year of manufacture: 06/2017 Material connection: Quick coupling (Camlock) Mounting: 4-hole flange plate Container volume: 12 to 15 litres Gsdpfoy Iwkiex Amyobl Conveying distance: 10–15 metres, depending on the vacuum pump used Transport and loading can be organised across Europe on request, for an additional charge. Prices quoted are exclusive of VAT. Viewing is possible by appointment. Please contact us; our team will be happy to assist you. Part-exchange or trade-in welcome! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Gbodpou Thh Eefx Amysl Machine weight baler approx. 4 to Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Gbjdpfx Asx Dnb Uemyjl Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 Gsdpjxgua Aefx Amyebl 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank Godpfxexgumcj Amyobl – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar

Condition: used, Various pistons / cylinders available. Cevoman bvba. Lenskensdijk 5 2200 Herentals Gjdpjy R Nu Esfx Amyebl Belgium

Condition: used, axle configuration: 3 axles, first registration: 01/2012, color: other, Year of construction: 2012, Empty weight: 6.690 kg Axle 1: left 4 mm right 10 mm Axle 2: left 5 mm right 10mm Gjdpfxeyxrf Aj Amysbl Axle 3: left 10 mm right 12 mm

Condition: good (used), mileage: 601,330 km, power: 345 kW (469.07 HP), first registration: 12/2012, fuel type: diesel, axle configuration: 6x6, wheelbase: 6,120 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: hydraulics, number of seats: 2, total length: 8,960 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Power take-off (PTO) - PTO - Radio - Sun visor = Remarks = Crane Highsta: ✓ Rotator: ✓ Original Dutch Volvo 6x6/6x4 configured as a Z-crane and hooklift system! -Camera -Automatic -1 bed -6x4 -6x6 with HYDRODRIVE!! -Fold-out bumper -HMF 1643-Z2 -Rotator -Cow nipper -AJK 25 tons hook, length 5.25cm -Hydraulics at the rear etc etc = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Max. front axle load: 9000 kg Gbjdpfx Aey R Egdjmyel Rear axle 1: Max. axle load: 11500 kg Rear axle 2: Max. axle load: 11500 kg; Steering; Suspension: hydraulic suspension Weights Empty weight: 16.830 kg Carrying capacity: 15.270 kg GVW: 32.000 kg Max. towing weight: 50.000 kg Functional Crane: HMF 1643-Z2, year of manufacture 2012, behind the cab Condition Technical condition: good Visual appearance: good Damages: none Financial information Price: On request Identification Registration number: 70-BBL-2 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email: