Used Post for sale (2,550)

Condition: good (used), Rigo Lamibind 340 HM Perfect Binder Machine in perfect condition, manufactured in 2016, with very low mileage. Ready to use. Hot Melt Binder Njdoymxhrepfx Ab Tecn Machine is very quick to set up – controlled via a touchscreen panel. Disc milling. External waste extraction. Instructions included. Technical specifications: Capacity up to 290 cycles/h Binding thickness 40 mm Max. format 340 x 450 mm Min. format 80 x 80 mm Cover thickness 300 gsm Weight 300 kg Power supply 230V

Condition: good (used), Heidelberg Eurobind 600 Perfect Binder Machine in perfect condition, with no signs of use. Ready to operate. Very low mileage. Manufacturer’s description: Nodpoymxhfofx Ab Tjcn Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of book covers or pages. The Heidelberg Eurobind 600 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum production rate of up to 500 books per hour. Factory-installed cutter with additional scoring knives and cleaning brushes. Automatic cover feeding and creasing. The set includes documentation, waste extraction, fume extraction from the glue gun, and an Abac compressor.

Condition: good (used), Logitrans LL1000TE Mobile Paper Stack Lift This device is in very good condition. Ncodpfxeymxg Is Ab Tjn Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery and charger. Battery-powered. Automatic and manual stack lifting and lowering cycles, fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift Ncodpfxoymxd To Ab Tjn This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 cm

Condition: good (used), Horizon Stitchliner 6000 Booklet Maker This machine is in very good condition, with low mileage, and was manufactured in 2014. Description: This machine boasts a robust, compact, and professionally built design. It is characterized by high efficiency and binding quality. Maximum throughput is 6,000 cycles per hour, and with a die-cut option, 12,000 cycles per hour can be achieved. The StitchLiner is set up fully automatically using a touch panel. The machine can sew booklets of up to 200 pages at a paper weight of approximately 60 gsm. Machine equipment: – 2 Horizon VAC-80 Sa + Sm collating towers – Horizon SPF-30S saddle stitcher – Horizon ACF-30S folding module – Horizon HTS-30S three-knife trimmer – Delivery, waste extraction system, 2 Hohner heads, compressors, additional components, accessories, documentation Technical specifications: Maximum format: 350 x 500 mm Minimum format: 140 x 200 mm Paper weight: 53 to 210 g Maximum booklet thickness: 5.2 mm plano Staple spacing: 60 to 150 mm Three-knife trimmer cutting thickness range: 2 to 25 mm Nsdpfeymxdtsx Ab Tjcn Production capacity: up to 6,000 booklets/h Wire thickness: 0.5-0.7 mm

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Nedpfxjyhc S Rs Ab Tocn Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers Ncsdpfxoylk T Ro Ab Ten - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: used, Year of construction: 2006, HORIZON VAC-60Ha / Hm / Hc Collators Nsdpfx Aboylkw As Tocn The Horizon VAC-60 series (Ha, Hm, Hc) are modular air-suction collators designed for professional print finishing, offering precise, fast, and reliable sheet handling. Key Features Modular system: Each collator includes 6 feeding stations; expandable up to 6 towers (36 stations total). Advanced air-suction feeding: Ensures consistent and reliable sheet transport for a wide paper range. Flexible format range: Handles sheets from approx. 120 × 148 mm to 500 × 350 mm, with paper weights from 40–300 g/m². High-speed productivity: Processes up to 9,500–10,000 sets per hour, depending on setup. User-friendly operation: Models Ha and Hc feature “Touch & Work” technology for quick setup and control. Efficient integration: Model Hm serves as an expansion module without its own controls. Error prevention: Equipped with sensors for misfeed, double-feed, and jam detection. Job memory: Up to 9 programmable settings for recurring jobs. Technical Specifications Dimensions: approx. 842 × 652 × 1,961 mm Weight: about 310–315 kg Power supply: 230V, 50/60Hz, 1.86 kW Loading height: 130 mm per station All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Wohlenberg 92 Paper Guillotine The device is in perfect condition, very low mileage. An unusual machine on the market. This is the newest model, currently in production. In one hands from new. Under a service contract until the very end. Year of production 2011. Technical data: Cutting width: 920 mm Stack height: 120 mm Weight: 2000 kg Power supply: 400 V Equipment: – programmer with 19” touch screen monitor – CIP-3 and CIP-4 operation, visualization of cutting on the monitor – memory expansion via USB, possibility of connecting the machine to the network – photocells – air table – cutting line Ncjdjymmzyspfx Ab Tsn – chrome table surface – rear saddle control on a servo motor – super fast work, always stops at „0” – hydraulic clamp with smooth force regulation – user manual – set of tools – sheet metal for clamp – tapping block – spare knife

Condition: good (used), machine/vehicle number: 30621, Ösmaschine Hang 103 LOK, machine number 709048, in good condition, immediately available Ösmaschine Hang 103 LOK, machine number 180887813, in good condition, immediately available If you are interested, we are happy to inform you about additional machines at our facility. Ncedpfx Abermlyre Tsn You are welcome to inspect the machine at our premises by appointment.

Condition: used, Year of construction: 2023, Used plant Year of manufacture: 2023 Condition: Like new, the plant was never put into production operation Equipment and technical data: Stationary clean air filter unit ECO JET DUO 6 XL ZRS 2 x 7.5 kW For extraction of wood dust and wood chips - Fans: 2 x 7.5 kW - Air volume flow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 units of 2.50 m each - BIA Category M, electrically conductive Ncsdpfjyk I U Aox Ab Ton - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief surfaces: 0.84 m² (bursting discs) - Base frame with discharge chute and rotary valve Dry discharge with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fans; AL-KO OPTI-JET filter cleaning; Including pressure relief surfaces and Dry discharge with C-coupling; Without filters and control system; Including pressure switches - ECO JET DUO 6 ZWR XL - 1100 MM: Spacer ring for increased expansion or unit height With 2 connection openings for intake nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For removal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long underneath the rotary valve, connection to transport pipe by customer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (indoor/outdoor device); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection type/Design: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* Number of cells: 7 Inlet/Outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (WxDxH): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 units required Filter BIA Category 'M' – electrically conductive; 2.50 m length, including support cages; 77.6 m² filter area - Intake nozzle 400 mm: with non-return damper in rectangular duct - ECO JET backflow damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Base unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding power section and controls as well as the frequency inverter are included in the base unit; the frequency inverter is installed in the control cabinet Cascade operation with FU changeover: Fan 1 runs via the frequency inverter (FU); when threshold reached, switch to mains operation; Fan 2 takes over the FU and control as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power power supply, Collective fault monitoring Display of fault messages in plain text on the display and collective fault lamp in the door Manual discharge start via display button Start filter cleaning via differential pressure Manual start of filter cleaning via button Post-cleaning supervision Brand monitoring...

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder Nsdeyi Uduepfx Ab Tscn - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: used, Year of construction: 2001, Folding machine Heidelberg Stahl folder KD 78/4KLL Year: 2001 Description: - 32 page folder Feeder - Flat pile feeder - Pump Folding unit Heidelberg Stahl folder KD 78/4KLL - Glue unit Nsdpfxeyi Ub Te Ab Tocn - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left - Third cross fold (left) - Excluding noise hoods Delivery Heidelberg - Stream delivery

Condition: good (used), Year of construction: 2019, Racking Hall consisting of cantilever and pallet racks, OHRA, floor area approx. 867m² – used –: Price ex location: €99,500 (net), for self-dismantling! Price for dismantling available on request. Material to close one gable side is also available at extra cost! Manufacturer: OHRA Year of manufacture: 2019, sheet metal 2021 Hall dimensions: Width: approx. 17.35m Length: approx. 50m Height rack: approx. 6,385mm Ridge height: approx. 7.10m After disassembly, one long side of the hall remains open (where it currently adjoins the existing building) Cantilever racking: 2 rows of 25 double-sided frames each = total 50 double-sided cantilever rack frames Arm length: 1.20m Arm load: 1,400kg Load center: 600mm Post load per side: 4,200kg Axle spacing: 2m Arms are plugged in Arms have load deflectors, preparation for unrolling protection Incl. pallet beams Base level plus 3 arm levels per side Total depth: 2.70m (2 x 1.20m plus 30cm frame) Aisle width: 3.25m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: pallet racking P3 Year: 2019 Bay width: 2,900mm, four bays at length 2.40m Bay load: 2,000kg Field load: 6,000kg Top edge 1st support (buckling length): 800mm 1 row with 17 frames, 1 row with 19 frames (there are pipes at two locations) Number of frames: 36 Rack length: approx. 48.10m Frame depth: 1.10m Frame width: approx. 10cm Beam height: approx. 10cm Ncodpsyk H Riofx Ab Ton Beam thickness (bearing surface): approx. 5.5cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 pcs at 2.90m and approx. 24 pcs at 2.40m length Snow load zone: 1 (0.65kN/m²) Wind zone: 1 / Terrain category 0.48kN/m² Available: immediately Condition: good, slight rust on outer frames and faded paint Location: Hockenheim region Drawing available as PDF, parts list, structural calculations. The sideloader shown in the photos is also for sale at extra cost (it recently received a nearly new battery for approx. €9,600 net).

Condition: used, Used mixer by Buhler (CH) type SPM-50-HT with butterfly/tri-foil agitator for work on vacuum. Mixer has contact parts designed in non-corrosive steel. Mixing shaft has length about 1750 mm and is equipped with butterfly agitator, with three paddles and external diameter 1040 mm. Top cover is equipped with two pneumatic accutators and fits mixing pans with diameter 1100 mm. Cover can be rised up to 500 mm. Agitator is belt driven by el motor 45 kW, 1470 rpm, 380/660 V, 50 hz. Mixer is hydraulically risen about up to 90 cm. Machine is equipped with local control panel by Siemens with touchpad and electric cabinet. Machine is also equipped with hydraulicaly operated post for mixing can. Working pressure in mixing tank can reach 0.3 bar. Machine had been working on paints. Mixing pan is not included. Specifications: Power: 45 kW Ncsdpeyma Efjfx Ab Tsn Style Blades: butterfly / tri-foil agitator

Condition: used,  Schuppenauslage mit integrierter Presseinrichtung / Mobile delivery with pressing device Heidelberg SPH-70 Njdpeyldg Rsfx Ab Tscn Schuppenauslage mit Presseinrichtung / Stream delivery with pressing device Heidelberg SPH-70 Baujahr / Year 2016 - Serial-No. 1224446842 Size min. 40 × 75mm - max. 700 x 1000mm Produktdicke / Product thickness max. 4 mm Presskraft / Pressing force 12.000N Anzahl der Nutzen / Standard no. of UPS max. 2 - 4 Einlaufhöhe / Infeed height 400 - 1000mm Steuerung MCT1 Bedienpult mit Display MCT control system1 control panel with display Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2005, condition: used, Hard cover book line Consisting of Year: 2005 - 2000 - 1999 Book block feeder Solema Autoload Year: 2000 Nipping machine Sigloch NHG-60 1 Year: 1999 Description: Ncsdjyi Emyjpfx Ab Tjn - Pressing station End sheet tipping machine Sigloch VAM Year: 2005 Description: - Cold glue: HHS - End sheet tipping: 2x Book back gluing machine Sigloch SB 3100/2 Year: 2005 Description: - Cold glue spine gluing - Intermediate drying station (infrared) - Cold glue spine gluing - Back lining station - Transport system, length (approx): 60 mtr Nipping & smashing machine Sigloch DNH Year: 2005 Description: - 2 pressing stations

Condition: good (used), Year of construction: 1991, 4-pocket folding machine with flat pile feeder including knife folding unit. New folding rollers in the main folding section! Ncodjx H Sr Eepfx Ab Tjn Maximum format: 460x650mm Electrical connection: 400V/50Hz Weight: 700kg

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, Plockmatic PBM 500 including BookFold Module and Trimmer Module. Ncsdpfx Aeyi Ta Ujb Tsn This booklet maker is in very good, lightly used condition! Counter readings: PBM 500: 86,305 BookFold Module: 173,595 Trimmer Module: 204,306 - Produces professional booklets inline or offline with stapling and folding. - Capacity: up to 50 sheets of paper (80 gsm) for folded booklets of approx. 200 pages - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm - Compatible with A and B formats as well as many custom sizes. Looking for other configurations on the machine? We are flexible and can tailor the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical team. If you would like further information, please feel free to contact us. Worldwide shipping available.

Condition: new, max. workpiece length 5150 mm profile spindle 1 Stück main drive 16 kW Control Beckhoff CNC Number of axles 5 St. CNC machining center Masterwood Project 385 WL, NEUMASCHINE The all-rounder for Windows, round arches and doors interior Post and beam 5-axis machining of all kinds Detailed description in the adjacent PDF file! HIGHLIGHTS: - Working range: X = 5150 mm; Y = 1500 mm; Z = 200 mm - 1 pc. 5-axis high-performance spindle, 16 kW, double bearing with HSK 63 F recording - fixed drill head with 19 spindles with 7 individually retrievable vertical spindles X-direction with 6 individually retrievable vertical spindles Y-direction with 2 double horizontal spindles X-direction and 1 double horizontal boring spindle in the Y direction Saw unit integrated in drill head - Carousel tool changer with 22 places and 102 mm grid spacing - Carousel tool changer with 16 places and 102 mm grid spacing - linear 4-fold tool magazine - Special clamps for straight window and door parts - special clamps for round window and door elements - 24 pcs. Vacuum clamps for internal installation - Vacuum pump - Chip conveyor belt - extensive design software for interior design, panel processing as well as f. Windows and doors: Masterwork: 2D-Wop for standard application panel processing / interior fitting with Additional function Lamello connection Master 3D Level 2: for more complex edits, optionally also expandable for 5-axis fully interpolating MasterWindow: Integrated window and door design software i.e. Machine does not have to (but of course) with external industry software be controlled. Njdsd Ih Htepfx Ab Tjcn VIDEO shows production of 4 sash parts in one clamping Complete machining including glazing bead production. Corner joint hybrid. Of course, all common corner joints on the machine producible. OTHER OPTIONS ON REQUEST! We are also happy to offer you suitable tools for the machine. (ording to the manufacturer - without guarantee!)

Condition: used, Duplo Ultra 300A UV Coater with SF-300 Feeder Removed from closed printshop. Was in full working order when disconnected. Would recommend machine benefit from a service. Sold Ex works. Any questions or need more photos please ask. Machine is in stock. Spec The Duplo Ultra 300A UV Coater is a high-speed, heavy-duty flood coating system designed for offline finishing of offset and digitally-printed materials. It standardly includes the high-capacity SF-300 Suction Feeder to handle production-level volumes. Core Technical Specifications The system is engineered to match the speed of modern digital presses while maintaining high-quality finishes. Maximum Speed: Up to 148 feet (45 metres) per minute. Maximum Paper Size: 20” x 28” (508 mm x 712 mm). Minimum Paper Size: 8.5” x 11” (215 mm x 280 mm). Paper Weight: 200 to 350 gsm. Coating Types: Applies High Gloss, Satin, or Matte finishes. SF-300 Suction Feeder Specifications The SF-300 Suction Feeder is the standard feeding unit for the offline "A" model. Feeder Capacity: 7.5-inch pile height or approximately 90 lbs of paper. Feeding Mechanism: Top-feeding air suction belt designed for difficult or heavy stocks. Detection: Built-in double sheet detector to prevent jams and coating errors. Weight: The feeder itself weighs approximately 305 lbs Ncedpfsymgumjx Ab Tsn

Condition: good (used), Year of construction: 2006, This is a well-maintained folding machine from 2006 for sale, 6 pockets 2 swords. Available from 12/24 Nsdeu Ah Dbspfx Ab Tecn

Condition: used, Year of construction: 2005, offer consists of: Horizon AFC-544 AKT 4-buckles cross folder PRICE WITH NEW PARALLELFOLD ROLLERS: 9.900 EUR - parallelfold rollers condition: 0% - crossfold rollers condition: 10% PRICE WITH NEW PARALLELFOLD ROLLERS: 9.900 EUR - technology: touch & work - memory folding types: 17 standard-typs of fold preprogrammed - saveable jobs: 200 memories for repeat orders - numbers of buckles: 1. folding unit: 4 buckles + knife 2. folding unit: 2 buckles - knife: full automatic - sheet size: max. 540x760mm; min. 120x172mm Ncedpfx Aeyk A I Rjb Ton - fold length: 1. buckle: min. 58mm all other buckles: min. 35mm - paper weight: 40-250g/sqm - pile height: 650mm - speed: max. 40.000 cycles/h - power: 400V/50Hz - 2,5kW - dimensions: 2.700x1.050x1.650mm (without conveyor) - weight: 1.050kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2015, offer consist of: - one clamp perfect binder BQ-280 - NO PRE MELTER Horizon BQ-280PUR one-clamp perfect binder - clamps: 1 - spine gluing: PUR - sight gluing: hotmelt - book block thickness: integrated monitoring station (outside the clamp) - milling section: with extraction - milling depth: adjustable - cover feeder: suction drum feeder with 4x scoring - technology: touch & work - saveable jobs: 200 memories for repeat orders - sheet size: max: 385 x 320 mm; min: 135 x 105 mm Nodpeyk Amgefx Ab Tocn - cover size: max. 660 x 385mm; min. 240 x 135mm - book thickness: max. 50mm; min. 1mm - cover weight range: 90 - 300 g/sqm - cover pile hight: max. 70mm - speed: max. 500 cycles/h dimensions: 3.055 x 905 x 1.520mm - power: 400V/ 50Hz - 2,7kW -weight: 900kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), functionality: fully functional, mileage: 43,959 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,150 kg, maximum load weight: 1,350 kg, first registration: 10/2024, next inspection (TÜV): 01/2028, loading space length: 3,700 mm, loading space width: 1,870 mm, loading space height: 1,930 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, all-season tires, central locking, cruise control, fog lights, immobilizer system, navigation system, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, truck registration, Rear wing doors (opening angle 260 / 270 degrees), full-size spare wheel (including spare wheel holder) Ncedpoyllw Defx Ab Tsn Additional equipment: Passenger airbag, driver airbag, trailer stability program, traction control (ASR), electrically adjustable and heated exterior mirrors, long exterior mirrors for vehicle width 2200 mm, black box (event data recorder, EDR), brake assist, roof antenna, eco package, electronic parking aid, driver assistance system: adaptive load control (LAC), driver assistance system: hill start assist, driver assistance system: intelligent speed assist, driver assistance system: drowsiness detection, driver assistance system: emergency brake assist, driver assistance system: post-collision system, driver assistance system: crosswind assist, driver assistance system: lane keep assist, driver assistance system: lane keep assist incl. traffic sign recognition, driver assistance system: rollover mitigation, 180 A alternator, cruise control incl. speed limiter, cooled glove compartment, infotainment system with 5" color display, DAB and Bluetooth interface, body/chassis: standard high-roof van, fuel tank: 90 liters, black radiator grille, cargo partition, model update (2), engine 2.2 liter – 103 kW MultiJet turbo diesel, wheelbase 4035 mm, tire repair kit, tire pressure monitoring system, acoustic rear parking warning (external warning signal), low emissions according to Euro 6e standard, halogen headlights, right sliding door in load/passenger compartment, seat upholstery: fabric, cab seats: double passenger bench seat, cab seats: driver’s seat with armrest and lumbar support, SMART tachograph (4.0), start/stop system, reversing camera, UConnect Box telematics system, gross vehicle weight rating 3.50 t