Used Power for sale (38,409)

Condition: excellent (used), Year of construction: 2013, Control system: UNILOG B6 Closing force: 4500 kN Distance between columns: 950 × 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Injection pressure: 2070 bar Maximum injection weight: 980.9 g Injection unit: ServoElectric (Knodler) Injection speed: 400 mm/s Servo package S0 ServoPower package S1: hydraulic pump speed control for increased energy efficiency Integrated filter unit: Yes Ejector type: Electric Ejector force: 60 kN Ejector stroke: 180 mm Additional equipment: Air valve Cooling water flow regulator Digital interface for temperature controllers (control of up to 6 thermoregulators) Fedeytfqajpfx Apwjgf Interface for nozzle needle shut-off control in the mould Interface for external hot runner controller Full integration for Wittmann W8xx series robot Quality control button Language: Polish

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Fgodpfx Apeu Eki Sewjf Drive: Electric

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Fgedpszqgllsfx Apwjf Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Fodpeif Az Uefx Apwegf Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: used, HERION hydraulic power unit with hydraulic pump Hydraulic power unit Unit No.: 6352160 Year of manufacture: 1976 Operating pressure: 115 bar Fgsdpfx Apexf Uzqewsf Flow rate: 4.5 litres/min. Hydraulic pressure (pump): max. 160 bar Motor power: 1.5 kW Tank capacity: 40 litres - 1 return filter - 1 pressure gauge 250 bar - 1 4/3-way valve HERION, type S10 B51 G013611 (24 Volt DC, 35 Watt) Space requirement (L x W x H): 600 x 400 x 600 mm Weight: 70 kg Very good condition Sold without oil

Condition: not inspected (used), 5 balers package: 2 x Orwak 3810, 3 x Orwak 3820 POWER. Conditions as they are- not us!!! Fgsdpfxszquqvs Apwef

Condition: used, Hydraulic power unit PLESSEY TUROLLA / HAWKER ELECTRIC Hydraulic unit, hydro power unit Type: TFP 8.5 D 113 Year of manufacture: approx. 1985 Operating pressure: 250 bar Flow rate: 11 liters/min. Tank capacity: approx. 16 liters Fgsdpfxszpbqyo Apwsf Motor power: 4 kW Mains connection: 400 volts, 50 Hz - Hydraulic pump PLESSEY TUROLLA, Type TFP 8.5 D 113 - 1 piece HAWE solenoid valve, Type HSV 2R2 (lifting/lowering valve) - Hydraulic power unit in horizontal design with low height, e.g. for lifting tables Space requirement L x W x H: 700 x 400 x 240 mm Weight: 55 kg (without oil filling) Good condition

Condition: used, Hydraulic power unit, KOSMEK hydraulic unit Pneumatic pressure converter Type: PL 087 Operating pressure: 100 bar Flow rate: 1 liter/min Tank capacity: approx. 4.5 liters - pneumatic drive - hydraulic connection Fjdezpbqtspfx Apwegf Space requirement L x W x H: 250 x 140 x 290 mm Weight: 16 kg in good condition

Condition: used, Hydraulic unit, HAWE hydraulic unit Type: HC 2L/1.1-1B/400-0-31F-G24 Hydraulic pump in the tank Flow rate: 1.1 L/min Hydraulic pump power: 0.9 kW Hydraulic pump: 380 Volt, 50 Hz Hydraulic pressure: max 400 bar - 1 solenoid valve, 24 Volt Weight: approx. 12 kg Fgjdpfx Apszpbqgowef Good condition

Condition: excellent (used), Year of construction: 2019, Equipment: foot remote control, Load capacity, horizontal/vertical: 100/50 kg Speed, continuously adjustable: 0.6 - 6 rpm Electrical connection: DC 230 V Space requirement: 470 x 400 x 350 mm Weight: 17 kg Fsdpfx Apeznvp Uowogf

Condition: ready for operation (used), Cutting capacity, circular: 340 mm Cutting capacity, flat: 340 x 290 mm Cutting capacity, square: 325 x 325 mm Saw blade dimensions: 600 x 52 x 2.5 mm Drive motor: 380 V, 6 kW Space requirement: 2100 x 2100 x 1470 mm Fsdpfoznvnksx Apwegf Weight, approx.: 1840 kg

Condition: excellent (used), Safety relay, safety control, overrun relay, flow monitor, contactor, relay, current monitor Fgsdpfxszmucdo Apwef -Manufacturer: Telemecanique, Power Monitor Ovp -Type: RM4JA31M -Cardboard dimensions: 90/80/H25 mm -Weight: 0.1 kg

Condition: good (used), Power cable, flat cable, crane cable, rubber hose cable -Power cable: Flat cable, crane cable, 4-core -Type: 4G 2.5 -Length: 30 m Fedpfezmtw Tex Apwsgf -Transport dimensions: roll Ø 565 x 25 mm -Weight: 8.4 kg

Condition: used, maximum load weight: 30,430 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 07/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,745 mm, Year of construction: 2023, Equipment: ABS, 3-axle tautliner box semi-trailer with certificate for load securing according to DIN EN 12642 Code XL, loading dimensions i.e. 13620 x 2480 x 2745 mm, SAF-Intradisc axles 3x 9000 kg air-suspended with lifting and lowering device, 1st axle liftable, Jost support jacks, ABS, disc brakes with EBS, EBS system 2S/2M, RSS/RSP – stability program, Versus sliding tarpaulin, 3 pairs of reinforced center rails laterally adjustable, aluminum insert boards, tarpaulin rear section with automatic rolling system – spring steel, lashing eye outer frame with 23 pairs of recessed 2.5-ton lashing eyes, 4 pieces of 2.8-ton aluminum load securing bars with locking mechanism, suitable for load securing towards the rear, 27 mm plywood floor with aluminum hat profile rails above the longitudinal beams, floor load capacity 7,200 kg, forklift axle load, spare wheel holder in frame design behind the axle group on the right, plastic tool storage boxes on the left and right, 2 rubber impact buffers at the rear on the outside, partial LED five-chamber taillights, LED ambient lighting, tires 385/65 R 22.5, approximately 50-70% tread depth, technically possible total weight 39,000 kg, unladen weight 5,570 kg, 1st owner, paint: RAL 9005 deep black neutral, very good overall condition!, sale only to commercial businesses!, all information without guarantee! Errors and prior sale excepted! – Vehicle is currently being delivered! Fsdszr Szbjpfx Apwjgf

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Fjdpfozphccjx Apwsgf Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Year of construction: 2007, condition: excellent (used), Power generator 150 kVA Renault Turbo - French production – year of manufacture 2007 – cabin TECHNICAL PARAMETERS: diesel Fgodpfoivt Inex Apwef MOT-482 engine generator Unelec engine power 120 kW generator power max 150 kVA liquid-cooled engine turbine transport dimensions (length / width / height) 310 / 150 / 245 cm weight 2000 kg

Condition: excellent (used), Power generator 85 kVA IFA – German production Fgsdpfxjivtazs Apwof TECHNICAL PARAMETERS: diesel IFA 6VD14.5 / 12/2SRW engine generator VEB DGA 68/5 engine power 68 kW generator power max 85 kVA liquid-cooled engine six-cylinder dimensions (length / width / height) 270 / 120 / 210 cm weight 1300 kg

Condition: new, * Model: Ford FG4050 V2 Fgjdpfx Apeztvbhewjf * Fuel: Gasoline * Continuous power: 2,500 W * Maximum power: 2,800 W * Engine: 212 cm³ OHV * Starting: Recoil start * Oil capacity: 0.6 liters * Features: AVR (automatic voltage regulation), circuit breaker, V/F/T multimeter

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven Fedpot U Uiasfx Apwjgf ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: used, Year of construction: 2024, Diameter 160mm 1.448m3/h Depression 2.503 Pa Fgsdpfxjzmmlks Apwef 2.2kw motor 2.800 Tr/min Pneumatic deslagging as new 400V

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck without step-jaw cheeks Manufacturer FORKARDT KTNCV 200-45, Three-jaw power chuck; the listed price applies to 1 three-jaw chuck. ----- Jaw stroke is achieved via clamping cylinder and draw tube. Chuck No. 1485270 with through-hole clamping. ----- Required cylindrical flange mounting according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system also suitable for reversible base jaws, type: FGB 200 ----- Jaw interface: Base jaw type: helical gear; Designation → Size: FGB200, SGB200 ----- Draw tube connection M52 x 2 mm Cylindrical mounting for spindle flange ø 170 x 6 mm Mounting hole circle for 3x cap screws approx. 135 mm ----- The chuck is in like-new condition. Weight without clamping jaws approx. 25 kg ----- Delivery without base and top jaws *We are available for any questions. *Shipping costs abroad upon request. Fsdpezrmzpsfx Apwegf

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Fsdozn Ap Ijpfx Apwsgf Note: Machine is part of an online auction!

Condition: used, This listing is for Olympus U-RFL-T Fluorescence Power Supply The unit is in full working condition and ready for immediate use This fluorescence power supply is a robust unit designed to provide consistent burner illumination for optical laboratory applications. Manufactured by Olympus, this reliable system is an excellent addition to any modern facility needing to power their fluorescence microscopes. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: Fodpfx Apozqf Npjwjgf This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Used Siemens SIMODRIVE 611 power module for CNC and automation applications. Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module Model: 6SN1123-1AA00-0HA1 System: SIMODRIVE 611 Design: Plug-in module Mounting type: Control cabinet mounting Fgodpszmm Irefx Apwef Cooling: Air-cooled Application: Industrial drive technology

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 26 t, overall weight: 1,080 kg, Equipment: documentation/manual, In perfect condition, tested and fully equipped. New hydraulic hoses, new oil, and new gas springs for the doors. Fgodpfx Apjztgnxswjf