Used Prepress for sale (69)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Nsdpjvf E Avsfx Af Ijwb Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, Year of construction: 2004, Fujitsu Luxel T-9000 CTP (Model PT-R8100) – CTP plate exposer - Quantity: 1 - Manufacturer: Fujitsu - Type: Luxel T-9000 CTP E - Model: PT-R8100 - Application: Imaging of thermal CTP printing plates - Plate size: up to approx. 1,165 x 940 mm - Resolution: up to 2,400 dpi - Plate thickness: 0.15 – 0.30 mm - Laser technology: Thermal laser (multi-channel) - Output capacity: approx. 20–30 plates/hour (depending on resolution) - Compatible with various workflow systems - Robust construction for prepress department Njdswv D T Topfx Af Iewb

Condition: used, Year of construction: 2017, • Manufacturer: AGI • Model: TOWER A3W • Year of manufacture: 2017 • Machine type: Photopolymer plate processor • Machine category: Prepress equipment for flexographic printing • Max. plate size: DIN A3 (297 mm x 420 mm) • Application: Processing and developing photopolymer plates • Area of use: Label printing, packaging, flexographic printing • Compact design, ideal for small to medium-sized print shops Nwjdpfx Aswv Eazef Ijb • Condition: Very well maintained, immediately ready for operation

Year of construction: 2025, condition: new, original Screen laser diodes 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand All offers subject to prior sale Nodpodmdvvofx Af Iowb

Condition: refurbished (used), refurbished mirror motors 633/750 Hz. for Heidelberg Prosetter 52/74/102 Nsdpfxopguawo Af Iewb fully tested, warranty refurbished mirror motors 633 Hz. for Heidelberg Primesetter /74/102 fully tested, warranty refurbished mirror motors for Linotype-Hell/Heidelberg Herkules/Pro/Basic/Elite fully tested, warranty All offers subject to prior sale

Year of construction: 2025, condition: new, U1254024-01 Trailing Edge Clamp Unit, "new" (Screen PT-R4xxx & OEM) PlateRite 4xxx, Luxel T6xxx, Acento, Avalon N4, Topsetter 74/P S100096323V02 orig. Tail Clamp 8RE Set, "new" (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF S100096323V02 orig. Tail Clamp 8RE Set (Screen PT-R8xxx & OEM) PlateRite 8xxx, Luxel, T9xxx, Avalon, Topsetter 102/P/PF "refurbished" with orig. Screen parts Nodpfxjb Uptij Af Iewb All offers are subject to prior sale

Condition: excellent (used), We can offer internal register-punches HB425, HB780, KOMORI 550 und referenz-punches for Screen (AGFA, FUJI), as well as for Heidelberg Suprasetter Classic 74/105, A52/A74/A75/A105. Nsdpfx Aepq Talsf Iewb Punch-Bar available for A52/A74/A75 All offers are subject to prior sale. Installation on request.

Condition: excellent (used), MV.059.116-02 (old no. PL.125.0000) Plate Detection Sensor Nodpfx Aogzbw Rof Ijwb for Suprasetter 74/105/A52/A74/A75/A105 second hand, tested All offers subject to prior sale

Condition: used, functionality: fully functional, Year of construction: 2004, ADVAND/GRAFOTEAM MDT26C Conveyor Nwodev Uqiyspfx Af Ijb second-hand All offers subject to prior sale

Year of construction: 2010, condition: good (used), 100350335V00 ProFace-touch-panel GP377-LG41-24V second-hand, tested, Nwedpowu Ekwofx Af Ieb for Screen PT-R4xxx/8xxx

Condition: excellent (used), Nearly all Suprasetter Spareparts for A52/74/75/105 and Classic and Suprasetter Laser Moduls, second hand, tested All offers are subject to prior sale Nwsdpfxeflwxvo Af Iob

Condition: excellent (used), PJ.187.100 Chiller Unit cpl. for Suprasetter A52/74/75/105 second-hand, tested All offers are subject to prior sale Nwedpfxjgzbwms Af Ijb

Year of construction: 2005, condition: good (used), All spare parts for Heidelberg Prosetter 52/74/102 633 Hz. or 750 Hz. mirror Motor (second-hand or refurbished), as well as all other electronic and mechanic parts. LVDS-Interface-Cards Nwodoctky Hjpfx Af Isb

Year of construction: 2012, condition: like new (used), MV.055.656/03 M10 Drive Motor for Suprasetter A52/A75, (new model >2009) second-hand, tested Nedpfx Afeinuyxs Iowb

Year of construction: 2025, condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel Nwodpfx Aeb Uptcjf Iob 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Year of construction: 2008, condition: excellent (used), functionality: fully functional, 1 x ADVAND Grafoteam PST36 plate stacker, 2008 cleaned and tested Nodpfx Asiuz Uhef Ijwb All offers subject to prior sale

Condition: reconditioned (used), Heidelberg cutting pair for Suprasetter Nwjdpfx Aed Ay Icsf Isb

Year of construction: 2019, condition: new, Deublin rotating union (drum) for Suprasetter, We have all spare parts for Heidelber Suprasetter in stock,new and used. Nedpfofbngdex Af Iswb

Year of construction: 2010, condition: like new (used), Suprasetter A52/A75 ,4up Manufactoring 11/2010 Nsdpogyxcgjfx Af Iowb 1 Laser Head, GEN III, 160mW 2400 dpi, up 22 Plates /Houer Min: Plates size 240 x 240 mm Max: Plate size 676 x 760 mm With Prinect 7.51 Installed on DELL PC with Stacker advant 36

Condition: excellent (used), advand TAT-48 rotating table Foroat 115 cm x 120 cm Nedpsvl Sk Tofx Af Iswb Top condition

Condition: refurbished (used), advand PST 26 Stacker Euro 1.280.- advand PST 36 Stacker Euro 1.480.- Nsdpfx Ajvgmlzjf Ijwb advant PST 36L Stacker Euro 1.680.- advand PST 480 Stacker Euro 2.180.- advand PST 480L Stacker Euro 2.380.- all stackers checked and fully operational

Year of construction: 2015, condition: reconditioned (used), Agfa Avantra 25,30,44 Spinners -Agfa Avantra 25 spinner, 25.000 RPM, 20.000 RPM Nwedpfxefm U Ede Af Iob -Agfa Avantra 30 Spinner, 30,000 RPM -Agfa Avantra 44 spinner, 13,500 RPM -Agfa GalileoCTP Spinner, 37,500 RPM

Year of construction: 2007, condition: excellent (used), Heidelberg Suprasetter 52A Njdpjirtdljfx Af Iowb -year of construction 2007 -81,800 exposures -Laser Head GEN II, 2400 dpi -bridge -Stacker advand 26 -Prinect RIP software installed on PC

Year of construction: 2013, condition: like new (used), Cooling system Termotec 850 for Heidelberg Suprasetter -Built in 2013 Nwjdpfjd Rimisx Af Ieb -New state -New generation

Condition: excellent (used), Year of construction: 2014, Agfa Azura 125 CX Washout Station - Very good condition Nodpfx Aswi Ilasf Ijwb