Used Printbind Kb 2000 for sale (7,942)

Condition: ready for operation (used), Dittel BM 2000 Balance – Measuring device SN:239-5228, used, in good condition, fully functional, scope of delivery as per photos Lodpfox Eq Icox Adkorn

Condition: ready for operation (used), Fanuc A06B-0215-B700 AC Servo Motor SN:C06ZF0779 + A860-2000-T321 used, in good condition, 100% functional, delivery as per photos. Ljdpfx Adsx Dt Aqokern

Condition: ready for operation (used), Fanuc A06B-0216-B400 AC servomotor, serial number: C162F1DEE + encoder A860-2000-T301, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lodpfx Ajx Dt Dnsdkern

Condition: ready for operation (used), Fanuc A06B-0236-B100 AC servo motor SN: C03XD5286 with A860-2000-T301 pulsecoder SN: 161358030924, used, in good condition, fully functional, scope of delivery as per photos. Lrsdsx Dt Eljpfx Adken

Condition: new, ELWA ETR 96 Type R 2000 - EL21-1 SN: 2474-021, unused in original packaging, 100% functional, scope of delivery as per photos. Lrsdpfx Aoy Rckyodkjn

Condition: new, Fanuc A06B-0225-B000 AC Servo Motor + A860-2000-T301 Pulse Decoder SN: 9435, unused, 100% functional, scope of delivery as per photos Lsdpfjm Nx Ndjx Adkorn

Condition: ready for operation (used), Fanuc A06B-0247-B805 servo motor SN C05YA3070 + A860-2000-T301, used, good condition, 100% functional, scope of delivery as per photos Lrsdsq E Dqrspfx Adken

Condition: ready for operation (used), Fanuc Model L50/2000 Motor Spec. A06B-0572-B077 Servo Motor Serial Number: CS72G0835, used, good condition, 100% functional, scope of delivery as per photos Ledpfx Ajuhi H Ssdkjrn

Condition: ready for operation (used), Fanuc A06B-0218-B200 AC servo motor SN: C148F2F0D with A860-2000-T301 pulse coder, used, in good condition, 100% functional, scope of delivery as shown in the photos. Lredpfx Adjy Nn T Rskon

Condition: ready for operation (used), Fanuc A06B-0215-B700 # 0100 Servo Motor SN: C044F1730 + A860-2000-T321 Pulsecoder, used, good condition, fully functional, scope of delivery as shown in the photos. Lrsdpfx Adjx Ip E Eekon

Condition: ready for operation (used), Fanuc A860-2000-X021 Pulsecoder, used, in good condition, 100% operational, scope of delivery as per photos. Lodex Dt Tpepfx Adkorn

Condition: ready for operation (used), Fanuc A06B-2063-B003 AC servo motor, serial number: C202F2BCE, with pulse encoder A860-2000-X021, pulse encoder serial number: (not specified), used, in good condition, 100% functional, scope of supply as shown in the photos. Lsdpjy U Tlvofx Adkjrn

Condition: ready for operation (used), Fanuc A06B-0225-B000 AC servo motor SN: C049X7373 + A860-2000-T301 pulsecoder SN: 312253, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the pictures. Lrjdjx Dt Dujpfx Adkjn

Condition: ready for operation (used), Fanuc A06B-0266-B100 AC servo motor SN: C03XA7279 with A860-2000-T301 pulsecoder SN:161630030924, used, in good condition, 100% functional, delivery as per photos. Lrodpey Nn Uhjfx Adken

Condition: new, Fanuc A06B-0213-B100 AC servo motor, with pulse encoder A860-2000-T301, mounting hole spacing: 70 x 70 mm, unused, in very good condition, 100% functional. Ljdei D Hyxepfx Adkorn

Condition: ready for operation (used), PARVEX RT230J R0001 servo motor with Mattke KEMA 2000 gearbox, ratio 29.45:1, mounting hole spacing: 88x88mm, drive shaft diameter: 14mm, used, 100% functional. Lrjdpsi D Natsfx Adkon

Condition: reconditioned (used), Year of construction: 2012, operating hours: 3,006 h, functionality: fully functional, CNC controller: MSX-711 (MAPPS IV) Capacity Turning length mm: 1.540 Max. turning diameter mm: ø ø610 (Turret 2 ø274) Swing over bed mm: ø ø660 Swing over cross-slide mm: ø660 (Turret 2 ø300) Turn-mill spindle Full indexing specifications X-axis travel mm: 495 Y-axis travel mm: ±125 Z-axis travel mm: 1.560 B-axis degree: ±120° Speed ​​spindle rpm: 12.000 Drive power kW: 18,5/11 (10 min./cont) Lsdjwztq Eopfx Adksrn Tool magazine Magazine places: 76 Tool holder: Capto C6 Lower turret Number of tool slots St .: 10 Indexing time s: 0,19 Main spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Counter spindle Speed ​​spindle rpm: 5.000 Drive power spindle kW: 22/18,5 (30 min./cont) Equipment Spindle 2 with tailstock option Electronic Handwheel Interface High-pressure coolant system Chip conveyor Air blow for chuck and tool tip Auto tool presetter for upper and lower Bar feeder interface Hobbing function

Year of construction: 2015, condition: used, Dimensions (LxW): 160 x 240 cm CO2 emission: 0 g/km Lrsdpfxszgrxvs Adken Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Lodezc D Enspfx Adkjrn Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Lsdpfozc Dzpjx Adkern Machine can be inspected under power by arrangement.

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018), all overhauled by B&LOverhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Ledjx D D Ikopfx Adkjrn Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • Directional spindle stop S1 Additional Equipment available (Pictures 17-21): • Equipment to be equipped with Robobar SSF 3 m loading magazine • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 2 different hybrid drums Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2006, Ref. -No.: 10651 Lrjdpfezcwt Ssx Adkjn Manufacturer: CHIRON Type: Mill 2000 Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840 D - Safety Integrated Storage location: Halberstadt Country of origin: Germany Machine-No.: 498-XX X-Travel: 2000 mm Y-Travel: 500 mm Z-Travel: 640 mm Total Power Requirement: 29 kW Weight Of The Machine Ca.: 9,6 t Further information: 3-axis machining center equipped with a Siemens CNC control system and a 40-position tool magazine. The machine allows pendulum operation on two separate machining areas. Tool Interface: SK40 Working Area: X-axis: 2,000 mm (can be divided into 2 × 850 mm) Y-axis: 500 mm Z-axis: 640 mm Equipment: Screw chip conveyor with discharge to the left side Stand-alone Knoll coolant system for tool coolant supply and machine sump flushing The machine can be inspected under power.

Condition: used, Year of construction: 2000, Overview This Bohrer R40 crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built in stainless steel and is suitable for integration into industrial crate handling systems. The system includes a stainless steel washing housing, integrated fluid collection basin, conveyor sections for crate transport, access platforms and safety walkways. The machine was observed in a wet production environment with crate conveyor tracks and facility piping connected to the washing area. Operation is carried out via an integrated control panel with push-buttons and indicator lights. Technical Data Manufacturer: Bohrer Maschinenbau Model / Type: R40 Machine Type: Crate washing machine Year of Manufacture: 2000 Origin: Regenstauf, Germany Application: Washing / cleaning of beverage crates Construction: Stainless steel housing and machine frame Conveyor System: Integrated crate transport / conveyor sections Washing Area: Enclosed washing chamber with splash protection Fluid Handling: Stainless steel collection basin and drainage system Access: Stainless steel stairs and maintenance walkway with grating Control System: Integrated operator panel with push-buttons and indicator lights Electrical Supply: 400 V Frequency: 50 Hz Connected Load: 26 kVA Lrsdszb A E Djpfx Adksn

Condition: used, mileage: 317,000 km, power: 206 kW (280.08 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 7,700 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, tail-lift, Year of manufacture: 2020 Front axle: Steering; Tyre profile left: 80%; Tyre profile right: 80% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.669 kg Carrying capacity: 9.331 kg GVW: 19.000 kg Tail lift: Dhollandia, tail lift, 2000 kg = Additional options and accessories = - Aluminium fuel tank - Binding rails 2 x - LED- lighting - Outside temperature display Lodpfxjzghdue Adkern - Radio/CD player - Rear air suspension - Roof and side spoiler - Side door - Visor

Condition: used, Year of construction: 2000, Overview This Krones K6W-25-S-E crate washing machine, manufactured in 2000, is designed for the automatic washing and cleaning of beverage crates in returnable bottle lines. The machine is built as a stainless steel industrial crate washer and is suitable for integration into automated crate transport and washing systems. The system includes a stainless steel machine housing, integrated conveyor sections, viewing / inspection windows, electrical control cabinet and operator panel with push-buttons, indicator lights and main switch. The machine is CE-marked and designed for 230 / 400 V AC, 50 Hz operation. Technical Data Manufacturer: Krones / Krones Zierk GmbH Model / Type: K6W-25-S-E Machine Type: Crate washing machine Year of Manufacture: 2000 Application: Washing / cleaning of beverage crates Construction: Stainless steel machine housing and frame Conveyor System: Integrated slat-chain conveyor and crate transport sections Drive System: Electric drive motor with gearbox Inspection Access: Viewing window with safety latch hooks Control System: Integrated electrical control cabinet Operator Panel: Push-buttons, indicator lights and red rotary main switch Electrical Supply: 230 / 400 V Current Type: AC Frequency: 50 Hz Nominal Current: 24 A Lrsdszb Ad Topfx Adksn