Used Promac Fx 380 for sale (7,768)

Condition: ready for operation (used), Groschopp WK0701401 geared motor with brake, 3-phase motor 380–420V~ 0.47A / 220–242V~ 0.82A, type E 32, maximum torque 800 Ncm, gear ratio i = 50:1 (11.92), serial number: 4587144, used, in good condition, fully functional, delivery as per photos. Hedpfx Aew Eq Upsd Donw

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link chain wheel, conveyor chain wheel -Drive wheel: conveyor chain wheel 11 teeth -Division: Dimensions see photos -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm with groove -Number: 6x sprocket available -Price: per piece -Dimensions: Ø 380 x 90 mm Hnedpfx Aewztxpjd Djw -Weight: 22.3 kg/piece

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 480 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 56 m/min, feed length X-axis: 560 mm, feed length Y-axis: 360 mm, feed length Z-axis: 480 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 56 m/min, Make Hyundai Wia Model i-Cut 380 MD Year of manufacture 2018 Control system Siemens 828 chop-mill and 3D simulation Pallets 2 Palette size 650x400 mm Pallet load 250 kg Hnsdpfx Ajw T Rv Ied Dew Traverses X/Y/Z 560/360/480 mm Rapid feed X/Y/Z 50/50/56 m/min Spindle speed 24,000 rpm Spindle power 10.5/8 kW Tool taper BT 30 Big plus Number of tools in the magazine 20 pcs. Machine dimensions LxWxH 2.0x2.7x2.85 m Length: X-way 2.0 m Width incl. chip conveyor 4.1 m Machine weight 5200 kg Equipment: Chip conveyor with drum filter, swivel, pallet changer, Fixture plate with reference holes.

Condition: used, Year of construction: 2002, machine/vehicle number: 910060/0001, conveyor dryer plant Factory consists of: Hjdpovt Rmvefx Ad Donw Conveyor dryer: • Feed conveyor (2019) • Three horizontal chain driven conveyor levels made of 5 sections (2002); • 5 heat exchangers (2002); • 5 fans (each is 80kW) (2002); • Cartridge filter for poisonous particles (2002), filters are cleaned; • Biomass separator (2019); • electronics; Fit to dry wood chips, corn biomass, hemp biomass. lucerne and similar. Manufactured in Germany

Condition: new, NEW CAR Power Control Numerical Control with NX Cut System Software and NX Pareto optimizer Barcode labeler with software Cutting length mm 3800 Cutting width mm 3800 Blade protrusion mm 90 Hnedpfx Adjrufzns Dow Front panel loading and unloading Automatic lateral aligner positioned in the blade carriage N° 1 fixed front table in bakelite with air curtain system for unloading the panels N° 2 mobile front tables in bakelite with air curtain system for unloading the panels Main blade, max diameter 380 mm, 15 kW motor Scoring blade, max diameter 200 mm Blade carriage speed forward 1 - 90 m/min. - backward 120 m/min. Pusher speed 85 m/min. Pusher carriage with 9 pincers

Condition: used, From € 165,00 now for € 156,75. Now with a 5% discount. Pallet offer 150 used plastic stacking crates - 400x300 mm, 15 Liter, perforated. This plastic stacking crate with Euronorm dimensions of 400x300 mm and a capacity of 15 liters is a practical and reliable solution for storing and transporting a variety of products. Hnsdpfx Aowt Twpod Dsw The crate

Condition: ready for operation (used), Groschopp WK0701401 gear motor with brake, 3-phase motor 380-420V~ 0.47A / 220-242V~ 0.82A, Type E 32, Mdmax. 800Ncm, i = 50:1 (11.92), Serial number: 4587150, used, in good condition, 100% functional, delivery as per photos. Hnodew Eq Uvspfx Ad Dew

Condition: good (used), Long link roller chains, transport chain, roller chain, drive chain, drive wheel, sprocket, link chain wheel, conveyor chain wheel -Drive wheel: conveyor chain wheel 11 teeth -Division: Dimensions see photos -Outer diameter: 380 mm -Hole: Ø 70 x 90 mm Hedpfx Adjwztu Ro Denw -Quantity: 2x sprocket available -Price: per piece -Dimensions: Ø 380 x 90 mm -Weight: 22.3 kg/piece

Condition: used, maximum load weight: 33,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2018, total width: 2,550 mm, total height: 1,750 mm, Equipment: ABS, Container chassis for: 2 x 20' containers, 1 x 20' container (centered), 1 x 30' container, 1 x 40' container, 1 x 40' container with tunnel (locking device height adjustable), extendable rear load support approx. 1,390 mm, ABS, EBS, BPW axle(s), disc brake system, air suspension with lifting and lowering device, lift axle, JOST landing gear, Vehicle may be covered with advertising decals and/or lettering. Hjdewzfw Rspfx Ad Donw Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle may be covered with advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this unit. Please contact us!

Condition: excellent (used), Year of construction: 2013, Clamping force: 380 t Screw diameter: 90 mm Shot volume: 1781 cm3 Hnedpfewv U A Eex Ad Dow Type: Horizontal Drive: Hydraulic

Year of construction: 2017, condition: used, Air dryer Weight 128 kg Compressed air pressure 13 max Ambient temperature max 46°C Hodpew Da Ensfx Ad Djnw

Condition: used, mileage: 165,000 km, power: 269 kW (365.74 HP), first registration: 05/2009, overall weight: 25,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, SCANIA P 380 Pop-Out, Pop-Up, Horse Truck for 6 Horses //Private sale without VAT// 6 horses, rear ramp, basement under the apartment, storage compartments around the truck, generator, 550 liters of fresh water, 4-6 sleeping spaces, living room, extra-large bed above the bathroom, video surveillance for the horse compartment, auxiliary air conditioning, auxiliary heating, TV/Sat, fine wood, bathroom, shower, toilet, air conditioning, kitchen, leather seating area, microwave, refrigerator and freezer, external tack room, cable winch, cruise control, alloy wheels, air suspension, tow bar, and much more. Subject to errors/input errors and prior sale. * NET SALE POSSIBLE. Hnedpfx Aowg Nwrod Dsw * Top Leasing Offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service of all makes of horse trucks and trailers. Please make an appointment in advance. Richard Theurer Andreas Theurer

Condition: ready for operation (used), Groschopp WK0701401 geared motor with brake, 3~ motor 380-420V~ 0.47A / 220-242V~ 0.82A Type E 32 Mdmax. 800Ncm i = 50:1 (11.92) Serial number: 4587143, used, in good condition, 100% functional, scope of delivery as per photos. Hnedpfxew Eq Uis Ad Dew

Condition: new, Year of construction: 2025, The Holzing G-MAX 380 straight edge bander with pre-milling and corner deburring ensures a high-quality end result. Coils up to 3 mm thick and strips up to 4 mm, this inexpensive machine comes with 1.2 kg glue tank, pre-milling, automatic gluing, edge cutting, end trimming, up-down milling, radial scraper and polishing function. As standard, it is equipped with an easy-to-use control panel with a touch screen. Feed speed 7 m / min. Board thickness 12-45 mm Hsdpfx Adegyi Tvo Dsnw Edge thickness 0.4 - 3 mm Min. Board width 90 mm Minimum plate length 170 mm Earning corners min. plate length (12-30mm) 170 mm Earning corners min. plate length (30-45mm) 220 mm Table working height 856 mm Extended support width 560 mm Dust extraction Ø4 "* 3 Engine power 6.0 kW-1 HP; 5.75 kW-3 HP Net / gross weight 500 kg / 632 kg Package dimensions: 2920x720x1320 mm Pre-milling 12,000 rpm Milling front / rear 12,000 rpm Milling up / down 10500 rpm Polishing 2800 rpm. Feed motor power 0.75 kW Pre-milling motor power 1.5 kW Spindle motor power with adhesive 0.25 kW Front / rear milling power and corner making 0.35 kW Up / down milling power 0.55 kW Polisher motor power 3KM-0.12 kW; 1KM-0.18 kW Preheating power 0.4 kW Heating power of the glue tank 1,315 kW Collecting size of the pre-milling machine 0 - 2 mm

Condition: used, mileage: 652,000 km, power: 280 kW (380.69 HP), overall weight: 18,000 kg, fuel type: diesel, brakes: retarder, gearing type: mechanical, emission class: euro3, first registration: 07/2004, Equipment: crane, soot filter, Crane:----- Retarder - Air conditioning, - Remote control - 3 extensionsSuspension: Leaf-air Hnodpfx Adew Ub Nho Dew

Condition: used, Year of construction: 2013, functionality: fully functional, CNC - ACCORD 40 FX MACHINE MAIN FEATURES: - working area X - Y = 5,020 x 1,680 mm Automatic lubrication. Pendulum machining. Air-conditioned control cabinet. XILOG MAESTRO Teleservice. 8 FX MATIC L=1600 work table supports automatically positioned Includes: - 2 fixed side base supports - 8 supports with X-axis drives - driven belt conveyor for removing waste from the inside of the table Each support equipped with: - 3 driven trolleys for mounting pneumatic clamps and suction cups - cleaning nozzles for each moving trolley - pneumatic locking/release enabling quick replacement of clamps and suction cups - preparation for strips facilitating loading and unloading Hnedpfewkqavox Ad Djw - preparation for mounting an additional stop Vacuum clamping system for elements with 2 independent work fields. Front and rear row of stops H=110 MAXI PRISMA T 5-axis spindle - HSK 63E holder - right/left rotation - power: 13 kW - rotation from 600 - 18,000 rpm - 15 kW inverter - liquid cooling - TTS locking system Waste guide at the electrospindle Blow nozzle for the tool Tool length measurement Preparations for pneumatic clamps BRC - Additional drilling and milling machining head Saw - saw diameter 300 mm - rotation 4,500 rpm 1 vertical ER25 clamp for milling cutter - machining depth 60 mm - rotation 18,000 rpm 3 vertical independent M10 clamps for drills, spacing 32 mm - machining depth 50 mm - speed 8,000 rpm 3 vertical independent M10 drill mounts, spacing 21.5 mm for making holes for the handle - machining depth 50 mm - speed 8,000 rpm 2 horizontal independent mounts (1 per side) ER25 for the milling cutter - machining depth 1x115 and 1x75 mm - speed 18,000 rpm 4 horizontal independent mounts (2 per side) M10 drill mounts - machining depth 75 mm - speed 8,000 rpm Window equipment in the left field Worktable equipment enabling the machining of linear and arc elements of windows: - 9 pneumatic clamps H=110 mm - 1 base stop H=110 mm on the left fixed support for basing arcs - 7 base side stops H=110 on supports - 1 laser as a base for arc elements in the X axis Supports facilitate loading/unloading Vacuum pump with a capacity of 250 m 3 /h TECPAD portable console PRO-SPEED security system Security system allowing for fast machine travels. Axis runs: X=90 m/min Y=90 m/min Z=30 m/min SAV€NERGY for vacuum pump TR-10 – tool magazine mounted on the table -10 positions TRC 48 – tool magazine Mounted at the back of the movable portal. - 48 tool positions (without holders) - distance between axes: 104 mm - max. tool diameter: 350 mm - max. load of one place: 10 kg - total weight of tools in the warehouse: 250 kg MACH 5 - a system enabling tool change in 5 s. Year of machine production - 2013 The machine is in continuous use - it will be available from July We invite interested parties to inspect it during operation Purchased as new from an authorized SCM representative in Poland and serviced by an authorized SCM service throughout the period of use The price of the machine includes preparation for transport by the SCM service and loading of this machine The film has been slightly accelerated

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 115 mm Hnsdpjc Uz Hmsfx Ad Dew -Transport roller width: 380 mm -Total length: 420 mm -Shaft mount: 40 mm -Two-edge: 25 mm -Number: 4x rolls available -Price: per piece -Weight: 12 kg/piece

Condition: used, mileage: 433,000 km, power: 279 kW (379.33 HP), overall weight: 26,000 kg, fuel type: diesel, color: red, axle configuration: 3 axles, gearing type: automatic, loading space width: 2,530 mm, loading space length: 6,750 mm, loading space height: 600 mm, Year of construction: 2014, first registration: 09/2014, Equipment: ABS, air conditioning, crane, Renault K 380 / 6x4 PLATFORM 6,75 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 433 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH TIPPER: 675 x 253 x 60 cm (L x W x H) CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 490/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING CRANE: HIAB 166 BS - 3 HIDUO + REMOTE CONTROL Hedpfx Adsxbmz Is Donw TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref. nr: 00124

Condition: ready for operation (used), Mitsubishi / Mazak FX 17C BN624A328H01 card,used, normal traces of use, 100% functional, scope of delivery according to photos Hodpfx Adji Eb Ets Donw

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036943, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling fast and innovative responses to market demands. It combines high performance, straightforward operation, and short delivery times. This machine can be applied in a wide range of industries, such as packaging, electrical and electronics, medical technology, and automotive. Your benefits: – Optimized price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine design – Fast delivery times enabled by the basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM • MC P1 with 15" TFT color touchscreen with multitouch functionality CLAMPING UNIT • Clamping force: kN 800 • Max. mold opening force: kN 120 • Clearance (h x v): mm 470 x 420 • Mounting platen (h x v): mm 610 x 560 • Mold installation height min. - max.: mm 150 - 400 • Opening width: mm 750 • Max. mold opening stroke: mm 350 • Ejector drive: electric • Ejector stroke: mm 100 • Ejector force forward/back: kN 22 / 22 • Ejector speed forward/back: mm/s 300 / 300 • Max. mold weight: kg 600 INJECTION UNIT • Screw diameter / type: mm 40 / Standard • Effective L/D ratio: 20.0 • Injection pressure: bar 1860 • Shot volume: cm³ 201 • Shot weight at max. stroke for PS: g 183 • Injection speed: mm/s 200 • Injection flow: cm³/s 251 • Screw drive / speed: rpm 334 • Plasticizing rate (standard): g/s 24.7 • Nozzle contact force: kN 34 ELECTRICAL PARAMETERS • Connected load: kW 20.6 • Installed heating power: kW 11.5 Hodow Ur I Uopfx Ad Donw • Power supply: V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet: t 5.6 • Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT • Low-wear plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface for cascade control, 4-fold • Euromap interfaces for handling: E18, E63 • Euromap interface (central computer): E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression molding function • Graphic analysis package The machine is located at our factory in Parsdorf and is available at short notice. Further additional options can be offered upon request. We look forward to your inquiry.

Condition: new, Year of construction: 2025, FEATURES BENEFITS Compact design Integrated air supply Utilises your existing workshop air supply, 7 bar, clean dry air requirement It has the ability to measure digital and analogue wastegates on all vehicle models. With its 23.5-inch full touch screen and simple interface, it is very easy to use. Can be used without an internet connection Built-in database of more than 1900 references Flow adjustment possible for all types of turbochargers up to 200 kg/h Calibration test plates provided to easily verify machine accuracy All types of turbochargers can be easily connected with 6 adapters included as standard. G3 REA-Master (USB) Controller Built-in complete with 14 cables 12 volt and 4 cables for 24 volt It displays and adjusts the current, voltage and position values of the Turbo VGT turbochargers. It can test all types of turbos with electronic, vacuum and vacuum sensor. Operates on 200 volts of electricity Calibration test plates supplied for easy verification of machine accuracy Supports PWM, FDCan, Can 2.0, Linbust, j1939 automatic communication protocols You can assign programmes to activators Quick-release mounting flange with adapters Machine weight 150kg Full CE Accreditation Hedpfx Ajq Trzfed Donw INCLUDING 1 x FX1 Flowbench Machine 1 x Touch Screen Monitor 14 x R.E.A. Cables 4 x 24 v Cables (OPTIONAL) 3 x C-Clamps 1 x Magnetic Stand

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, Functional Stratasys FDM 3D printer, complete with all licenses and a tank for dissolving supports. Hnsdpfx Asw U Sifod Dow

Condition: ready for operation (used), Mitsubishi / Mazak FX 17C BN624A328H01 card,used, normal traces of use, 100% functional, scope of delivery according to photos Hnedpfsi Eb Ewsx Ad Dew

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! Hnedpeud H Dmsfx Ad Djw As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Mitsubishi / Mazak FX 702C BN624E577G51 card,used, normal traces of use, 100% functional, scope of delivery according to photos Hjdei Eb Hijpfx Ad Donw