Used Purifier for sale (72)

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Dksdpfxoib Dado Afnjh Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Dsdpsi Atb Tjfx Afnekh Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" Dodjl Dw U Djpfx Afnokh The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: new, - High level of protection and comfort during welding - Particle filter with spark arrestor, pre-filter, and 5-stage filter saturation indicator that shows the user the condition of the particle filter - Optional gas and odor filters can be used for additional protection against common gases, vapors, and unpleasant odors that can arise during welding - Automatic airflow control ensures the airflow to the headpiece is always constant. - Immediate visual and audible alarms are triggered when specified limits are continuously exceeded (battery power, airflow monitoring). The Adflo powered air respirator system draws in contaminated air from the environment, filters it through the appropriate filters, and then directs the purified air into the headpiece via an air hose. For further information on the protection levels and any usage restrictions, please refer to the operating instructions for the respective headpieces. Dksdpfowbiq Ujx Afnoh Set: 3M Adflo Starter Kit · 1x Adflo Powered Respirator 837730 · 1x QRS Air Hose 834016 · 1x QRS Adapter 533506 · 1x Air Flow Meter 838020 · 1x Prefilter 836010 · 1x Spark Arrestor 836000 · 1x Particle Filter 837010 · 1x Li-Ion Standard Battery (approx. 8 hours) 837630 · 1x Belt 835000 · 1x Charger 833111 · 1x 3M Versaflo Safety Helmet M306 with Comfort Face Seal and Polycarbonate Visor, Clear Cheapest price online: approx. €1,100 Here for €929

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Djdpfoqmmffox Afnekh Price on request.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Dedpfeqmmvrex Afnekh

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Dkedpfx Afjqmmkkjnsh

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Dkedoqmmcgopfx Afnsh

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Dkedoqmmvcspfx Afneh

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Dksdpfeh Rfcnox Afnjh Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: new, functionality: fully functional, machine/vehicle number: S-CL-100-FN-EC, input voltage: 230 V, overall weight: 17 kg, total width: 250 mm, total length: 250 mm, total height: 475 mm, volume flow: 134 m³/h, Equipment: type plate available, ISI S-CLEANER Mechanical air filtration unit (solder fume) for up to 1 workstation Type: 100 FN Version: conditionally mobile (glide runners/no wheels) Control: none Horizontal, conditionally mobile mechanical air purifier with EC- radial fan for the separation of solder fumes. TECHNICAL DESCRIPTION: Air volume: - 134 m³/h (air flow rate) - 100 m³/h (effective air capacity) (depending on the filter assembly, without collecting elements) Suction nozzle: NW 50 mm (rear) Filter assembly: - Pre-filter - HEPA filter H13 - Activated carbon cassette (refillable) Color: RAL 7035 light gray Voltage: 230 V Frequency: 50 Hz Protection class: IP54 Fan technology: energy-saving EC technology Air capacity: not adjustable Dodpfx Aowpu Twsfnskh Dimensions: Length 250 mm / Width 250 mm / Height 475 mm Weight: 16.5 kg

Condition: good (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 40 / 670, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. This unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Dksdew Ehzyjpfx Afneh

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: Dedpfx Afjua D Aljnekh The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: used, functionality: fully functional, overall weight: 320 kg, total length: 750 mm, total width: 895 mm, total height: 1,260 mm, TECHNICAL SPECIFICATIONS Compressed air system comprising: - 1 air compressor with filter,. Maximum air flow rate 2500 litres/min . Maximum operating pressure 11 bar. Nominal motor power: 15 kW. Noise level 67 dB (A). Electrical connection 400 V Dimensions: 750×895×1260 mm Weight 320 kg - 1 COMPAIR F100S air dryer, Refrigeration air treatment with condensate filter system. Air flow rate 10 m³/min. Power 1.5 kW. Power supply: 230 V/PH1/50 Hz. Maximum pressure 16 bar. 2" connection . Refrigerant: R513A Dimensions: 779×720×1360 mm Weight: 186 kg - 1 Condensate purifier: PURA ELITE 5. Flow rate 300 m³/h. Condensate inlet: 2×1/2". Purified water outlet: 1" . Residual oil content: 10 ppm Dimensions: 580×190×610 mm - with 4 DONALDSON ultra filters - 1 buffer tank of 2 m³ (2018 litres). Year: 2017 . Maximum permissible pressure: 10.67 bar. Test pressure: 15.83 bar + Dkodpfx Aow Uq Dnofnsh - 1 x 1 m³ (1000 L) tank Year: 2016 Working pressure: 12 bar Test pressure: 17.2 bar

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Dsdjtu H N Hopfx Afnskh Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90

Condition: good (used), Year of construction: 1985, functionality: unexamined, total width: 2,100 mm, total length: 4,150 mm, total height: 1,100 mm, overall weight: 7,200 kg, type of input current: AC, 2 pieces electromagnetic overband magnetic separators. 1 piece is overhauled ! Manufacturer: SKET Magdeburg Type: EMHB 1200 / 1700-L Connection cable: 7,0 kW Weight: 7200 kg Dimensions Length: 4100 mm Width: 2100 mm Height: 1100 mm For conveyor belt systems with a belt width of up to 1200 mm. Belt speed up to a maximum of 2.09 m/s Automatic cleaning The electromagnetic overbelt magnet with automatic cleaning is installed above the conveyor belt and enables quick and easy separation of magnetic particles from the conveyed material. This separator is primarily used in applications with a high occurrence of ferromagnetic particles, where separation with manual cleaning would not be suitable due to the high level of contamination. Compared to permanent overband magnetic separators, the magnetic field of electromagnetic plates is much stronger and deeper. Electromagnetic magnetic separators are ideal for collecting parts with difficult shapes (such as screws, nuts, balls, etc.) and heavier iron parts. The extremely strong electromagnetic field also ensures the separation of ferromagnetic particles that are located under a higher layer of the flow. The electromagnet is also an exclusive solution for applications where it is necessary to deactivate the magnetic field for operational or maintenance reasons (which is not possible with the permanent magnet). Contributions of the separator application purified material (without ferromagnetic impurities) Permanent protection of technological systems continuous production operation Dkjdpeu Imz Njfx Afneh automatic cleaning without interrupting the material flow minimization of operating effort and costs due to production downtime

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° Dsdpfx Afsvxwnwenokh max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Condition: good (used), . dimensions of the table 5000x550 mm . maximum rectifiable length 5000 mm . maximum transversal stroke 600 mm . Z axis travel 600 mm . grinding wheel dimensions 420x127x100 mm . manual type head for inclined planes . tank with paper purifier Dodpfsip Dxwjx Afnskh . magnetic separator . magnetic plate with n° 3 units of 1.000x500 mm . length dimension 12000 mm . width dimension 2500 mm . height dimension 3500 mm . weight 15000 Kg . complete machine manuals .CE certificate

Year of construction: 2005, condition: like new (used), DAIRY FOR THE PRODUCTION OF HARD AND SEMI-HARD CHEESE, as well as fresh cheese for the bakery industry We offer a complete dairy for processing milk into hard and semi-hard milk cheeses with high quality cheese production technology (such as Grana Padano–Italy), and the production of fresh cheese for the bakery industry. It was built in 2005 and equipped with the most modern stainless steel equipment for cheese production. It has its own heating, has a laboratory for product control, and within the factory there are offices, as well as a spare warehouse. Capacity: 1 batch of 5,000 L of milk can be processed within 3-4 hours 1 shift of 8 hours can process 10,000 L of milk with 4 workers Finished products based on monthly capacity: Semi-hard and hard cheeses...up to 30 tons/month. Curd……………up to 10 tons/month. Fresh cheese……………up to 10 tons/month. Plant description……….see attached FLOOR PLAN: Reception, production, drying, packaging, brine, ripening... Maturation room with wooden shelves equipped with regulation humidity and temperature. There is also a bio-purifier of waste water. The equipment requires an area of 500 m2, height approx. 5 m. Boiler room 130 m2, 2 boilers, one gas and the other oil burner. Djdpfjix N R Nox Afnjkh Refrigerator approx. 50 m2, height 6 m, regime 2-8 °C Required electrical power: 50-60 kW List of technological equipment: 1. Milk flow meter with vent 2. Storage tank for fresh milk 3. Plant for thermalization of milk/plate pasteurizer 4. Separator-centrifugal purification and standardization of milk 5. Cylindrical container for receiving cream 6. Fermenters for the production of pure cheese culture 7. Cheese maker 8. Storage tank for thermally processed milk 9. Storage tank for whey 10. Prepress for cheese 11. Work table for filling cheese mass into moulds 12. Pneumatic presses for cheese 13. CIP-plant for circular machine washing 14. Brine 15. Wooden racks for ripening cheese 16. Moving platform for sorting and caring for cheese 17. Three-part washing basin/mould for cheese and cheese 18.SC-self-priming pump 19. CC-centrifugal pump 20. Tub for the production of fresh cheese 21. Packaging machine Milk intake: 2 tanks per 10,000 L Whey tank: 1 pc of 20,000 L CIP: 3 tanks of 1,000 L each Duplicators: 2 x 1,000 L Main boiler 5,000 L manual adjustment of parameters, Alfa Metal – HR Pasteurizer: Jedinstvo - HR - 5,000 L/h - approx. 20 years old. Separator: Alfa Laval - Sweden - 5,000 L/h - approx. 20 years old. Schulenburg tub 2,500 L Start of operation of the dairy: 2007-2008…….stopped production in 2016. Minor service required: inspection of equipment and lubrication There is technical documentation of the equipment Note: For sale only complete equipment. Transport approx. 5-6 x 40ft. More photos upon request !!

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Dsdpovpuvgefx Afnskh Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: new, Year of construction: 2025, Diatomite crusher & purifying machine Dksdpfjq Nx E Ssx Afnsh After purifying processing, The purity is white diatomite with SiO2 above 90%, Al2O3 below 0.04%, and Fe2O30.4 below.

Year of construction: 2023, operating hours: 4 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 10220, The hyCLEANER® red EVO I cleans different forms of façades, surfaces and materials: very gentle, effective, fast and above all, economic. The machine works with highpressure water and does not need any electrical connection. Both, the glass and the frames are cleaned simultaneously. All water leading elements are made out of stainless steel. Purified-water can be used and the glass surfaces dry up, leaving no streaks behind. A further advantage of hyCLEANER® red EVO I is the running wheels. They do not leave Dkodpfx Afsxnlz Hsnjh any marks on the surface of the façade - gentle cleaning can be so easy!