Used Pvc Machinee for sale (1,182)

Condition: used, loading space length: 6,060 mm, loading space width: 2,440 mm, loading space height: 2,800 mm, Year of manufacture: 2008 Empty weight: 2.000 kg General condition: poor Technical condition: poor Visual appearance: poor Please contact Christian Theißen for more information Hodpfsz S Ac Uox Ak Ujnu Manufacturer: Unknown Model: Office container Year of build: 2008 Condition: Used Data: Dimensions LxWxH: 6055x2435x2800 mm Weight: approx. 2.000 Kg Colour: white Transport Points in accordance with ISO Standard: in the corners, Forklift pockets available stackable: 3-times Drainage of rainwater: via circumferential Drainage gutters in the frame, with downpipes in the corner posts Windows: white PVC-Windows Powerinstallation: 2x double sockets Lighting (2x16W): 2x double light bars Special features: E-Heating, Air conditioning Information: 1x open side, used, damaged, dents on the outer walls Information: Location: 97828 Altfeld bei Marktheidenfeld immediately available

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks Hnjdpfx Akei Hmpio Usu - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Hnodepbvqvjpfx Ak Uju Opening timer Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: used, mileage: 32,211 km, power: 346 kW (470.43 HP), first registration: 07/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 08/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Standard warranty, extended liability for material defects 48 months max. 200,000km WITHOUT TRAILER SURCHARGE!!! Construction site package, trailer package, EBS, full brake assistant, steering brake, roll-away lock, 2 rotating beacons on FH, LED lighting, front rear view camera, ASR, emergency brake assistant, lane departure warning system, PTO gearbox-dependent, MAN Mediasystem Advanced Navi 7'', Navi map Europe+Russia, RIO BOX, smartphone integration, Rockinger SK5 towing hitch, broom and shovel holder, side deflector plates on skip side wall, longitudinal deflector plates on skip side wall. Longitudinal deflector plates on body side wall, protective roof screwed over the entire width of the body, PVC roll-up tarpaulin, 3x tarpaulin fastening with tensioning strap and ratchet on the side, Hodpfx Aot Hn Awek Uonu

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100 Hsdpfx Aetu Hy Eok Usnu

Condition: good (used), Code: 0134 Brand: BRANDT - GERMANY Model: KTD 53 Automatic edge bander for wood, pvc, veneer, furniture, custom furniture, joinery and various Technical data: Min/max panel height mm 10/40 Edge thickness min/max 0,4 - 1,5 mm Feed speed 7 mt/min on motorized roller conveyor Min panel width mm 65 Composition: Gluing unit Cutting shear unit End cutting unit Upper/lower trimming unit Wheels on base for easy handling Volt 380/50 Total power Kw 4,5 Compressed air 6 bar Overall dimensions mm 1800 x 615 x 1170 h Hnsdpfjwq Sc Sox Ak Ueu Weight kg 280

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, volume flow: 3,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, total height: 2,200 mm, total length: 1,000 mm, total width: 800 mm, overall weight: 200 kg, warranty duration: 12 months, Dust extraction system for double mitre saws or saws used in aluminum processing, e.g., Emmegi / Elumatec / Mecal / FOM / Rapid / Pertici, etc. If you are looking for a high-performance and quiet dust extraction system, you have come to the right place. Hedowii Hxspfx Ak Usnu Alternatively, there is a pre-control unit including a switch for your double mitre saw, which operates via a potential-free contact. The dust extraction system is ideally suited for aluminum / PVC / steel. Very high-performance and extremely quiet dust extraction system with a noise level below 80 dB! 2600 m³ per hour suction capacity 3 kW motor The dust extraction system includes a 15-meter hose with 2 outlets.

Condition: used, Year of construction: 2012, functionality: fully functional, The bunker conveyor belt from Trio technik is for sale; original price €6,200. Length: 1800 mm Usable width: 200 mm Hsdpfx Akexqdyge Usnu Overall width: 270 mm Cleat height: 30 mm with a pitch of 150 mm Belt inclination angle: 60 degrees Stainless steel hopper with approx. 110 liters capacity Raised side guides, 130 mm high PVC covers throughout Discharge height: 1275 mm With Schütz control unit, max. 1 kW Machine dimensions: L: 1450 mm, W: 550 mm, H: 1825 mm

Condition: good (used), Code: 0458 Brand: ARTECH BIESSE GROUP Model: SINGLE 89-N - CE Standard Edge bander for straight and shaped panels , for edges in wood, veneer, PVC, plastic laminate etc. - CE Standard Hnsdpfx Asznu Dwok Uju Technical data: Working height up to 120 mm Edge thickness 0,4 - 3 mm Minimum bending radius 20 mm Minimum panel length mm 300 Glue tank capacity 3 liters Motorized feed with adjustable speed Front extension for supporting large panels Work surface tiltable from 0 to 45 degrees Feed speed 4/16 mt/min with variable speed drive Trimmimg unit consisting of 2 superimposed motors Total absorbed power Kw 5,2 Working pressure bar 6 Overall dimensions mm 1300 x 900 x 1380 h Weight kg 350

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Hedpfx Akjzfapmj Usnu Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2686017, For sale is a steel cutting machine from ROTOX, type SZA268, manufactured in 2020. The ROTOX SZA268 is an automatic sawing machine used for cutting steel rectangular tubes and steel profiles with a wall thickness of up to 4 mm. The 90° sawing unit with hydraulic feed enables precise cuts, which can be performed either parallel to a ROTOX PVC cutting line or according to a cutting list. The length positioning is controlled by a servo axis, and the machine features a PC control and a profile-independent clamping system for flexible operation. Technical data: Dimensions: Machine width: approx. 12.5 m without protective fence Machine depth: with 10 mm table: approx. 2500 mm without protective fence with 20 mm table: approx. 3500 mm without protective fence Machine height: approx. 1900 mm Weight: approx. 2560 kg incl. feeding magazine for 10 reinforcing bars and removal table with pusher Cutting angle: 90° Cutting length min / max: 250 / 3500 mm Usable tools: All saw blades must comply with EN 847-1 and be approved for the speed of the saw motors. Saw blade: Ø 450 x 4.0 x 50 mm, Z300 Material to be processed: Steel or aluminum reinforcing bars for window construction Bar length min / max: 450 / 6500 mm Profile height min / max: 7 / 80 depending on the contour mm Profile width min / max: 28 / 80 depending on the contour mm Electrical: Mains connection: 3/N/PE~ 50 Hz 230/400 V ± 5 % Power: 2.4 kW Rated current: IN= 16 A Fuse: B 16 A Mains connection cable (type): H05RR-F 5G2.5 qmm Protective conductor: 10 mm² Cu Saw motor: 230/400 V; 50 Hz; 1.5 kW; 5.7/3.3 A Output speed: 65 1/min Lubrication: 0.6 l mineral oil CLP 220 Pneumatics: Operating pressure: 7 bar Limit pressure: min. 6 bar (also during operation) max. 8 bar Hnedpfxsziandj Ak Ueu Compressed air quality: ISO 8573-1: 2010, Class 7.2.4 Pressure switch: Warning pressure 6 bar / Shut-off pressure 5 bar Air consumption: approx. 60 l per cut Hose connection: Ø inner 9 mm Hydraulic linear drive Operating pressure: 160 bar Stroke: 200 mm Motor: 24 VDC; 500 W Workpiece clamping: Pneumatic Permissible ambient temperature during operation: min. 15 °C and max. 40 °C Operating manual available in digital format. Subject to prior sale, changes and errors.

Condition: new, Number of boring motors 1 St. boring of corner bearing 1=yes, 0=no 1 ja boring of olive 1=yes, 0=no 1 ja Götzinger Olive drilling machine type OBM-PLUS (corner and scissor bearing + handle olive drilling) Pos. 1 ----- Vertical drilling unit with drill head quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/400V, 50Hz, 1.1KW Pos. 2 ----- Drill head BKF 3, 21.5 mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops adjusted to constant Grip size (olive drilling) Pos. 3 ----- 1 set of drills (for handle olives) consisting of: 2 dowel drills d = 10 left 1 artificial drill d = 25 (or according to your choice or manufacturer fittings) Pos. 4 ----- Drill head BKF 2/3 can be changed quickly 2/3 spindles for corner bearings drill on the loose frame part (Sigenia, Maco, Roto, Winkhaus, GU) complete with stop system with 2 folding stops Pos. 5 ----- Drill 2 cylinder head drills for corner bearings ----- Basic price in the above version Pos.1 - Pos.5 on request! ----- Special accessories with additional charge: -Folding stop per piece, EUR 110,00/piece -Stop system for central drilling, EUR 1,980.00 -chassis, EUR 920.00 -Roller conveyor right/left 1.5 m, 200 mm wide complete with 4 rollers each, EUR 1,940.00 -Conversion kit for PVC with steel insert Oil brake cylinder for uniform feed speed PVC support to prevent the profile from tipping over Reduction gear for low speed, EUR 1,790.00 -Drill set for PVC with steel insert, EUR 420.00 2 step drills d = 12 mm left 1 piece step drill d = 12 mm right -2 pieces of additional stops for the stop in the tilt window, EUR 180.00 -2 pieces of additional pneumatic stops for gripping the entire fighter groove, EUR 1,650.00 -2 pieces of additional pneumatic stops for gripping the dowel hole in the Fighter area complete, EUR 1,650.00 -4 additional pneumatic double stops for gripping the dowel hole in the fighter area complete, EUR 1,980.00 PS: If the dowel hole is in the middle, 1 stop on the right/left is sufficient. If the dowel hole is off center, you need 2 stops on the right/left. -Packaging 1 box Packaging 1 pallet with foil, on request ----- We will be happy to send you the price list with all options upon request. (Technical information according to manufacturer - no guarantee!) Hodpfxjygm Tcs Ak Uenu

Condition: excellent (used), functionality: fully functional, Eccentric granulation EGR is used in the production of temperature- and shear-sensitive plastics. It is specifically designed for the granulation of soft PVC, rigid PVC, HFFR formulations, or compounds for low-, medium-, and high-voltage cables based on elastomers. Additionally, the machine can also be used as a conventional single-screw extruder for various processing purposes. • Screw diameter: 200 mm • with degassing zone Hsdpfow Iu T Tox Ak Uonu • Drive power: 72.5 kW

Condition: used, Technical details: diameter: Nr.1: ca. 6 mm diameter: Nr.1: max. 25 mm connection electric: 400 V motor: Getriebemotor / gear motor total power requirement: 0,25 kW weight of the machine approx.: ca. 120 kg space requirements approx. LxWxH: 0,85x0,6x0,1,0 m Wire Peeling Machine Application: peeling of electric wires to be processed parts: wires with PVC coat / rubber coating wire feed via angular rail 40mm on a length of 600mm infeed manual driver roller dia=80x21mm serrated copy of manual is available i.D. Hjdpfx Aju Nw Snek Uonu *

Year of construction: 2005, condition: used, Film Slitter Manufacturer: Wulf Maschinenbau Type: WSH 700 Year of manufacture: 2005 Technical data Roll width: 50 - 700 mm Unwind roll diameter: max. 800 mm Rewind roll diameter: max. 800 mm Unwind mandrel diameter: 6 Rewind mandrel diameter: 6 Cutting system: Block cutter Strip width: 15 - 700 mm Cutting speed: 10 - 100 m/min Material thickness: max. approx. 2 mm (depending on the material) Material selection: PVC, PE, PP, paper Web tension: max. 5 N/cm Hnjdpez Ef Ixjfx Ak Usu Dimensions Unwind station Length: approx. 1300 mm Width: approx. 1600 mm Height: approx. 1200 mm Weight: approx. 500 kg Cutting unit Length: approx. 1100 mm Width: approx. 2200 mm Height: approx. 1500 mm Weight: approx. 1300 kg Rewind station Length: approx. 1600 mm Width: approx. 1700 mm Height: approx. 1200 mm Weight: approx. 700 kg Connection values Connected power: 25 kW Frequency: 50-60 Hz Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, axle configuration: 3 axles, first registration: 02/2015, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 91 m³, 3x9-ton BPW axle assemblies with air suspension, sliding floor CF approximately 10 mm thick, closed pallet box for approximately 32 pallets, underrun protection with foldable light guard in aluminum, 1 storage box on the lower left rear, hydraulic connections with hose at the bottom, complete with hydraulic hoses, tarpaulin with tarpaulin system, walkway on the front wall/ladder, tires 6x 385/65 R 22.5 approximately 50% tread on steel rims, offset 0, silver, PVC mudguards, wheel chocks, moving wall for complete discharge, wear plates welded onto the side walls in the rear area, side wall panels fully welded on the inside, Wabco EBS system, loading pressure gauge, 3 steel roof rails, 2 separate LED reversing lights, 2 separate reversing lights behind the third axle, 2 LED headlights on the support structure, BPW fifth wheel with 2x20-ton capacity, first axle liftable, approximately 3m ladder, etc. Unladen weight: 8400 kg Hnodpfxsz Nciuj Ak Ueu Offer and images are subject to change without notice.

Condition: used, maximum load weight: 33,036 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2025, next inspection (TÜV): 06/2027, loading space length: 8,500 mm, loading space width: 2,440 mm, loading space height: 1,600 mm, loading space volume: 31 m³, total width: 2,550 mm, total height: 3,310 mm, Year of construction: 2025, Equipment: ABS, Equipment: Lift axle, spreader, air suspension with lifting/lowering device, support legs, tire tread depth: 80% Safety & Environment: ABS, disc brake, EBS ----* Schmitz SKI 24SL 8.2 * Aluminum box body, 31 m3, with grain discharge chute * Unladen weight: 5767 kg * Load pressure gauge * Schmitz Rotos axles * 1 axle, liftable * Electric air suspension system * 2 x 7-pole sockets and 1 x 15-pole socket * Low-pressure cylinder, max. 170 bar * Inner wall thickness 3.5 mm, floor 8 mm Hsdpfsz Ndfqox Ak Ujnu * Roof-shaped tarpaulin frame, spreader, lashing chains, PVC roll-up tarpaulin * A-sign * Tires: 385/65 R22.5 ----* Our opening hours * Monday - Friday: 08:00 - 17:00, Saturday: by appointment! * Outside of opening hours, we are available by appointment! * We speak: English, [other languages] * Other: Errors, prior sale and changes reserved * Leasing, financing, trade-in possible * All information without guarantee!

Condition: used, mileage: 225,000 km, power: 115 kW (156.36 HP), first registration: 11/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,109 mm, total width: 2,052 mm, total height: 2,694 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, In accordance with our "General Terms and Conditions," without any warranty, we can offer you the following vehicle, subject to final sale, errors, typos, and prior sale: Iveco 35S16 SV Box Van (Vehicle 509) First registration: 23.11.2022 225,000 km Engine: 2,287 cc 115 kW / 160 hp Euro 6 TÜV (technical inspection) valid until 11/2026 Permissible total weight: 3,500 kg Unladen weight: 2,180 kg Payload: 1,320 kg Overall length: 6,109 mm x overall width: 2,052 mm x overall height: 2,694 mm LED daytime running lights Tires: 225/55R16, approximately 80% tread remaining in the front, approximately 40/30% in the rear Trailer hitch with ball head Double doors, 1/2 and 1/2 at the rear Sliding door on the passenger side 6 pairs of lashing eyes in the cargo area Side walls lined with PVC up to a certain height Wooden floor Partition wall Hnodpfxez R Haze Ak Ueu Central locking with remote control 1+2 seats 2 x electric windows, mirrors, heated mirrors Multi-function steering wheel Fully automatic transmission Air conditioning Radio/CD Rearview camera with monitor Cruise control Storage compartment above Maintenance contract Last repairs: Service on 20.03.2026: Maintenance service, both rear brake calipers new, brake pads new, cabin mounts new, front axle brake disc + pads + brake calipers + wear sensors, 2 new shock absorbers Service on 06.03.2026: Both front axle wheel hubs new, both front axle wheel bearings new Price: €10,500.00 (net) All information is provided without any warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 224350 Hnsdpfxov Tmalo Ak Usu - General Industry - Application: Painting, Bonding, Sealing, PVC, Gasketing, Encapsulation, Molding, Discharging, Filling in case of material shortage - Maximum flow rate: 9.46 l/min - Maximum working pressure: 62 bar - Maximum air inlet pressure: 12.41 bar - Pressure ratio: 5:1 - Maximum operating temperature: 82°C - Fully inspected pre-owned product - 1-year warranty - Shipping or in-store pickup available - 21% VAT not included

Condition: excellent (used), functionality: fully functional, table height: 900 mm, Model: RLHK Machine type: Roller conveyor with length stop Suitable for aluminum, PVC, and wood profiles Robust and stable construction Smooth-running transport rollers Adjustable length stop for precise and repeatable cuts Ideal as an outfeed roller conveyor for circular saws and miter saws Easy operation and precise positioning Hsdjz Sucgepfx Ak Uonu

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Hnodpozarn Eefx Ak Uou Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available

Condition: good (used), Equipment: bathroom, shower, Used container system, dry, watertight, in good condition. The system has already been disassembled and is ready for collection. Manufacturer: BICOBA Year of manufacture: 2009 - Consisting of 10 x 20ft containers with toilet and shower - Container area = approx. 150m² - Layout see sketch Dimensions per container: Length: 6.00m Width: 2.45m Hjdpfez Rmtbox Ak Uenu External height: 2.90m Internal height: 2.50m Equipment: - Plastic windows with insulated glazing and tilt/turn function - Blinds - PVC flooring (must be machine cleaned) - Water heater was connected to the building - Wall panelling - Ceiling panelling - Container lockers - Awnings on the front and side - Weather protection sheets for the roof - 3 showers - 3 sinks - 2 toilets with cabin system - 2 urinals - Documents available Insulation: Wall: 100mm Floor: 100mm Roof: 100mm - Signs of wear on the flooring Loading and transport can be arranged. Only serious and legitimate inquiries will be answered, including the following information: name, email address, and telephone number.

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Hodpfxsz N Shzj Ak Uonu Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,039 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK 🚜 ✅ FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE Looking for a forklift that generates value from day one, rather than incurring maintenance costs? This COMBILIFT CB2500 is the perfect solution. Professionally serviced, thoroughly inspected, and ready for immediate operation, this multidirectional forklift is ideal for warehouses, production facilities, timber yards, steel service centers, and logistics operations. ## ⭐ KEY BENEFITS ✅ Fully serviced before sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,039 h ✅ Ready for immediate operation ✅ No additional investment required Hnsdjz R Aprspfx Ak Usu ✅ Live online demonstration available ✅ Direct delivery to your facility --- ## 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB2500 📅 Year: 2022 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,039 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- ## 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- ## 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- ## 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- ## 🛠️ EQUIPMENT ✅ Full enclosed cabin 🔥 Heating system 📻 Radio ↔️ Hydraulic fork positioner ↔️ Side shift 💡 Working lights ⛽ LPG engine 🔄 Multidirectional steering system 👨‍🔧 Operator comfort package --- ## 🏭 IDEAL FOR 🌲 Timber & wood processing 🪑 Furniture manufacturing 🏗️ Steel mills & service centers 🔩 Aluminum & PVC profiles 📦 Long load handling ↔️ Narrow aisle operations 🏢 Indoor & outdoor applications --- ## 🤝 WHY CHOOSE FT LOGISTICS? FT LOGISTICS specializes exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🌍 100+ machines available in stock 🚛 Deliveries throughout Europe, South America, Africa, Asia, and the Middle East. ### 🚀 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing & financing assistance 🚛 Transport organization 📄 Export & customs documentation 🔩 After-sales service Hundreds of customers across Europe trust FT LOGISTICS and continue to return for future purchases. 📹 Live online demonstration available 📸 Additional photos & videos on request 🚛 Customized transport quotation worldwide ### FT LOGISTICS 🚜 WE DELIVER MACHINES READY FOR WORK 🚜

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Hsdpfsz R Iqusx Ak Usnu Sealer Dimensions: 550 x 420 mm Weight: 125 kg