Used Pvc for sale (947)

Condition: new, overall weight: 2,000 kg, empty load weight: 1,600 kg, maximum load weight: 400 kg, loading space length: 5,490 mm, loading space width: 2,290 mm, loading space height: 2,120 mm, tire size: 155r13c, Car trailer as a construction trailer for 12 people. Ndodpeqwi Nkofx Almja The insulated *stay trailer* is suitable for all seasons thanks to its sandwich construction with 50 mm and 60 mm insulated floor. An electric heater provides support in very cold weather. Self-sufficient thanks to WC in separate room with lockable door and storage room. The use of a crew trailer is possible on any construction site. As a normal *car trailer*, it can be driven to the construction site by a simple car. These vehicles are also used as *burro trailers*. Our mobile construction trailers have the following as standard an entrance door with personal lock lockable, extra room with outside door with chemical toilet and sink, storage room with door and shelf, stairs for hanging and holder on the door, 50mm Snadwich structure outside silver inside white, iso floor in 60mm, PVC aud floor, Refrigerator, coffee machine, connection cable, 230V fuse box with RCD, sockets, switch and interior light, table and chairs, shelf, window with safety cover, coat hooks, four sturdy crank supports, 230V power socket, sturdy frame and galvanized V-drawbar. Further technical details can be found below. Accessories for construction trailers include a toilet room with toilet, other sizes for up to 16 people, 100 km/h shock absorbers and an anti-theft device.

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts Ndodpfx Alstndpzjmoa - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: new, empty load weight: 6,840 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, total length: 13,620 mm, total width: 2,480 mm, total height: 2,700 mm, suspension: air, load capacity: 31,160 kg, PVC tool box Double POLYWOOD floor 28+9mm Semi-LED lights Sliding roof Spare wheel holder Height under rail from 2700 to 2900mm Nodpfxjx E Uv Rj Almoda Height adjustable mm Elevation 0mm for loading and unloading 13 lashing rings per side Tension cable 600mm aluminium sideboards Internal length 13.62m Coupling height 1150mm

Year of construction: 2026, condition: new, functionality: fully functional, power: 2.2 kW (2.99 HP), overall weight: 400 kg, positioning accuracy: 0.05 mm, table length: 900 mm, table width: 600 mm, number of axes: 3, Equipment: CE marking, documentation/manual, Any shape or form may be cut, engraved, or 3D milled using this universal CNC router. The Wattsan A1 6090 can create décor, furniture, advertising, and packaging. This machine is compatible with several materials, including wood, MDF, chipboard, acrylic, plexiglass, PVC, composite, and aluminum. The Wattsan A1 6090 has a working area of 600x900x200mm. Its basic design includes a T-slot table and a 2.2 kW spindle. Two-phase stepper motors are responsible for accurate motions. You can give our managers a call for additional details! Wattsan A1 6090 characteristics Working area: 600x900 mm Spindle: 2.2 kW Machine size: 1260 x 1500 x 1662 mm Weight: 340 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK Nsdpjih Sb Nofx Almjda On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, empty load weight: 640 kg, maximum load weight: 660 kg, overall weight: 1,300 kg, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 2,300 mm, tire size: 195/55r10c, Stable and high-quality sales trailer as a platform trailer for food or merchandise. Our food trailers from the *SELLERH* series are manufactured with an insulated sandwich panel structure. The robust steel frame is welded and hot-dip galvanized, which ensures high stability. A lockable steel door, *not made of plastic*, is installed in the door. The *body* is made of 25 mm polyester sandwich panels in white. The *car trailer* has four crank supports for lifting the *food truck*. Thus, it is an affordable *car trailer* for the *market*, *food stall*, *cocktails*, *fast food*, *non-food items*, *street food*, *merchandise*, and much more. Here is an overview of the standard equipment of our sales trailer: *Entrance door with lockable pedestrian door*, *step on the drawbar*, *sales flap on the right* with lifting aids, lockable from the inside, electrical distribution, robust *crank supports*, *sandwich panel structure* 25 mm, white exterior, maneuvering handles, support wheel with holder, robust *welded frame*, and a very stable V-shaped drawbar, hot-dip galvanized. As accessories for our *sales vehicles*, we offer additional *flaps*, *tarpaulins*, *pocket shelves*, sales counters, cabinets, sinks, *PVC flooring*, *100 km/h shock absorbers*, and *trailer lock*. --- You can find all our cost-effective offers on our website. Germany-wide delivery possible (except for islands)! Please feel free to ask us for the prices. --- Nedpfx Aljiigb Ujmoda PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Collection times: Monday - Friday – [Time] Collection is not possible on Saturdays!

Condition: new, Year of construction: 2026, The ATC series was created for professional use in large industrial plants and factories. Like the plotters of the SPECIAL series, it can be designed for machining various materials. To meet the demands of heavier machining, ATC machines use an additional reinforced structure and stronger AC servo drives on each axis. The presence of five axes provides support in the machining process of even the most demanding elements. The standard in these devices is a vacuum work table. It is also possible to install a hybrid table. The plotters in this series come standard with automatic tool change, a six-position linear magazine and a tool height sensor. The applied solutions significantly accelerate the machining process requiring the use of several milling cutters. Processed materials: -wood - wood-based materials (chipboard, MDF, OSB, etc.) -plastics -Composites -PVC - non-ferrous metals (aluminum, brass, copper, etc.) Nodein Etzepfx Almjda CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 2100 x 3100 [mm]. MATERIAL FASTENING: The machine is equipped with a vacuum table. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 300 mm DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. TOOL MAGAZINE: The standard equipment of the machine is a linear tool magazine equipped with 6 ISO30 cones. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time.

Condition: new, Year of construction: 2026, 1325 SPECIAL milling ploter is a precise machine constructed in Poland. It can be used to process many different materials such as wood, wood-based materials (chipboard, MDF, OSB, etc.), plastics (plexiglass, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. Construction of the machine is made out of steel which gives it high rigidity as well as resistance to congestions associated with the machining process. The plotter is equipped with a user-friendly interface that is easy to use, but also has advanced functions. Njdpfx Aein Eu Hslmeda CONSTRUCTION: The plotter is made entirely of high quality steel. During the production process, all elements undergo a special heat treatment. WORK AREA: The usable area of our machine tool is 1500 x 2500 [mm]. AXIS RANGE AND GATE CLEARANCE: The standard range of the Z axis is 200 mm. However, it is possible to increase it to 400 mm. DRIVES: Our machine tools were powered by digital motors with high resolution and high power, which ensures appropriate acceleration and speed in particular directions. Classic and proven helical blades work in the X and Y axes, which ensure high durability and precision, and the Z axis is driven by a high-quality ball screw. All axes run on rail guides. SPINDLE: The cutting tool is driven by a strong, liquid-cooled and durable high-class brushless spindle. The spindle bearing is high-quality machine bearings, very quiet and guaranteeing above-average durability. The rotational speed of the spindle ranges from 6 to 24 thousand. RPM An inverter is used for power supply, which has more power than the spindle, which protects against speed drops when working under heavy load. SOFTWARE: The machine is equipped with appropriate CAD / CAM software in the latest version. The software enables quick and easy design of elements, which the program then converts into the so-called G-code. It is also possible to import finished files from other programs. CONTROL: The machine is operated by the controller, which has its own processor and operating memory, which ensures stable and reliable operation. The machine controller has the function of active vector analysis, thanks to which the operation of the device is smooth and the error in processing is small. The controller has the function of returning to further work after the loss of power, so there is no need to initialize the program from a scratch. The memory built into the controller allows the machine to work without having to load the program each time. Additional options: - vacuum table with Busch or Becker pump - chip extraction system - oil mist - any size of the working table

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material Nsdpfxjip Uzpj Almoda 67641340ec347

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!) Njdpfx Aloi Hmpiemjda

Condition: as good as new (ex-display), Year of construction: 2017, Kannegiesser belt conveyor Belt conveyor GF 1000-680-600 Ndjdpfx Aow Iga Eolmea RA1302 The Kannegiesser conveyor belt is from 2017 and is in good (used) condition. The belt conveyor has a 400V motor MKM TYPE-1 681.015 with frequency converter to regulate the conveyor speed. The shown supports are included in the delivery. Technical data: conveying length (NL): 1000 mm Framework width (NB): approx 680 mm belt width (GuB): 600 mm Height / Belt run (BH): 685 mm +/- 100 mm Number of support feet: 2 pieces Conveying speed (v m/s): adjustable up and down with frequency converter Drive: Normal Motor Electrical data: 400V / 50Hz / 0,37kW Deflection drum (UT): Ø = 60 mm Belt: 2-layer PVC belt, grey, smooth Year of construction: 09/2017 Special feature / accessories: 1x MKM TYPE-1 681.015/4 with frequency converter 1x emergency stop switch on one side under scaffolding, center 2x light barrier 2x deflection drum cover All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or email. We are happy to help you plan and implement your projects. We are happily looking forward to hearing from you. Sincerely, Your team at Dr. Sonntag GmbH & Co. KG - your specialist and contact for intralogistics

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. Ndjdpfewpkw Esx Almoa The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Full and original technical documentation available. .

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, The float sink tank operates by immersing shredded plastic materials in water. Materials with a density less than water (e.g., certain polyolefins) float, while denser materials (e.g., PET, PVC) sink. The integrated drag conveyor facilitates the continuous removal of settled materials from the bottom of the tank, ensuring uninterrupted operation. Njdpfx Aswm Nd Eelmjda

Condition: good (used), Year of construction: 2021, functionality: fully functional, conveyor belt width: 1,090 mm, conveyor belt speed: 190 mm/s, total length: 3,500 mm, total width: 1,580 mm, total height: 290 mm, overall weight: 240 kg, discharge height: 290 mm, inner radius: 1,070 mm, outer radius: 2,400 mm, power: 0.37 kW (0.50 HP), Equipment: type plate available, Manufacturer: Transnorm Year of manufacture: 2021 Overall dimensions (LxWxH): 3,500 x 1,580 x 290 Width incl. side panel in mm: 1,300 Width incl. drive in mm: 1,500 Side panel height in mm: 210 Conveyor width in mm: 1,090 Curve (degrees): 90 Curve radius, inside in mm: 1,070 Curve radius, outside in mm: 2,400 Belt type: Grip belt, PVC Belt width in mm: 1,090 Substructure: without (optionally available) Sliding surface: wood Running direction: right Drive: head drive Motor type: gear motor Motor data: SEW 0.37 kW, 220 - 240 or 380 - 415 V Motor position: left in conveyor direction Conveyor speed in m/s: 0.19 m/s Net weight in kg: 240 Ndodpfsya H Duox Almsa Special features: Adjustable side guide Condition: Used / fully functional Function test: OK

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, total length: 1,400 mm, total height: 2,300 mm, total width: 250 mm, workpiece weight (max.): 72 kg, For sale: Nearly new automatic powder coating line, installed in 2023, with approximately 800 operating hours. Current layout footprint: approx. 12 x 28 m, H 5 m. Price and dismantling timeline subject to individual agreements. Layout modifications available: pre-treatment tunnels can be added, and the curing oven can be reconfigured as a straight-through tunnel suitable for parts exceeding 6 meters in length. We can provide a complete quotation including dismantling and international relocation upon separate arrangement. Excellent opportunity to acquire an almost-new line at a lower price and with much shorter lead times compared to a new installation. Monorail conveyor: - Speed: 0.9 – 3.3 m/min - Automatic lubrication - Automatic chain tensioning unit - Chain pitch: 270 mm - Total length: 131 m - Total load capacity: 9500 kg - Steel supports between the floor and conveyor Automatic powder coating booth Gema: - PVC booth: MagicCompact EquiFlow BA04 - MagicControl 4.0 control panel - Photo-cell frame for automatic gun control Ndedpfox H Tadsx Almja - 16 x OptiGun GA03-P automatic guns - 1 x OptiSelect GM04 manual gun - 17 x OptiSpray AP01.1 powder feed pumps - OptiCenter OC07 powder feeding system - Ultrasonic sieve US07 for OptiCenter - 2 x ZA07-23 reciprocators with X-axis automatic control - MonoCyclone EZ05-16, 16,000 m³/h - Powder filter: 16,000 m³/h, 30 kW - Big-Bag system for waste powder collection - CO₂ explosion protection system - Manual spray wall / trolley unit shown in pictures NOT INCLUDED Powder curing oven: - Hybrid heating (electricity or gas) — offers unique flexibility to choose the most economical energy source - Installed capacity: 300 kW - Max. temperature: 220°C - Siemens PLC control panel

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, For sale: Minipack-Torre Modular 50 Digit shrink wrapping machine, made in Italy. A robust and reliable L-sealer, ideal for packaging a wide range of products using shrink film. Currently, we have 4 identical units available in stock – all are in full working order. The price listed is per machine. Location: Ivanka pri Nitre, Slovakia – ready for inspection or immediate collection. Technical Specifications: Manufacturer: Minipack-Torre S.p.A., Italy Nedjxu Dulspfx Almjda Model: Modular 50 Digit Year of manufacture: 2001 Voltage: 380–415 V Frequency: 50–60 Hz Power consumption: 2.3 kW Current: 6.0 A CE certified Serial number: 001088 Condition: - Fully operational and tested - Good technical and visual condition - Suitable for continuous industrial use - Machines regularly serviced and stored indoors Price: €3,500 per unit (Ex-works Ivanka pri Nitre, Slovakia) All four machines are available and ready for immediate sale. Ideal for: - Industrial and commercial packaging - Shrink film applications (PVC, POF, Polyolefin) - Food, cosmetics, and general product wrapping

Condition: new, mileage: 10 km, power: 125 kW (169.95 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,200 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * Premium refrigerated box body * Carrier Xarios 300GH refrigeration unit (operates both on the move and when stationary) * Cooling and heating function * PVC curtain at rear (slidable) and on side * Audio system: MBUX * Bluetooth * Extended exterior mirror mounts left/right * DAB tuner (digital radio reception) * Apple CarPlay * Android Auto * Start/stop system * Front cup holders * Spare wheel holder under rear frame incl. jack * Cab seats: 3 seats * Overhead storage compartment above windscreen * Storage compartment below passenger side dashboard * Tow hook at rear * Driver's side airbag * Traction control (ASR) * Electrically adjustable exterior mirrors * Outside temperature display * Brake assist * Cab roof lining * Automatic daytime running light activation * Electronic brake-force distribution (EBV) * Driver assistance system: Crosswind Assist * Keyless Start * Steering wheel (mechanically adjustable column) * Headlight range adjustment * Daytime running lights * Light automatic function * Side marker lights * Engine 2.0 L – 125kW CDI KAT * Low emissions as per Euro 6d emission standard * SCR system (AdBlue technology) * Seat belt system with warning indicator (driver's side) * Seat cover/upholstery: fabric * Cab seats: driver’s seat adjustable * Active seat with lumbar input * Maintenance interval display Assyst * Heat-insulating glazing * Permissible gross weight 3.50 t * 3D spoiler (roof & side spoiler; refrigeration unit integrated into spoiler) Premium * Tool box * Load securing rail flush with wall * Special floor made of checker plate * BÄR tail lift 750 kg with roll stopper, painted * Lockable side door * Reversing camera (optional extra) * Additional air suspension on rear axle If the vehicle is not in stock - short delivery times possible! * Ask us for an individual leasing or financing offer * Net export possible * Delivery from €199 Didn't find the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. All at a fair price! Nodpfx Aloxzm Uujmjda You can also purchase just the bodies for your existing vehicle from us! Don't hesitate to contact us! Images may show optional extras not included in the basic price. The descriptions provided online are non-binding. They do not constitute guaranteed features. The seller is not liable for errors in typing, data transmission, amendments, or input mistakes. Please verify the specifications directly on the vehicle prior to purchase. Errors and interim sales excepted. This ad is an invitation to make an offer.

Condition: new, mileage: 10 km, power: 129 kW (175.39 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,200 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, * New vehicle including manufacturer's warranty * Cooling unit: Carrier Xarios 300GH with auxiliary cooling (230V connection) Ndsdpfxovm N Ufo Almsa * Unit with cooling and heating function * Iveco Daily 3.0 HDI 175PS (129 KW) * EURO6 (Green environmental badge) * Fog lights * Daytime running lights * Cruise control * Multifunction steering wheel * Active seat with KG adjustment * ABS- ASR- AFU * DAB radio MP3 * Bluetooth * Air conditioning * L/W/H 4100x2200x2100 * Electric windows * Electric. Mirror * Central locking with radio * On-board computer with trip calculator * Reinforced design * Long wheelbase * Cooling box with side door * PVC curtain on the side and rear * BÄR tail lift 750 KG (with roll stopper) * Fastening rails for securing loads * Lockable storage box * Special floor with checker plate and water drain * Side marker and outline lights in LED technology * Roof spoiler and side wind deflector * Underrun protection made of aluminum * Full-fledged spare wheel * Additional air suspension on the rear axle * Rear view camera for an additional charge If the vehicle is not in stock - short-term delivery time possible! Ask us for an individual leasing or financing offer * Net export possible * Delivery from 199¤ Not found the right vehicle? Configure your own vehicle! Whether equipment, body or engine variant. Everything at a fair price! You can also buy just the bodies for your existing vehicle from us! Do not hesitate to contact us! * Images may show special equipment that is not included in the basic price. * ----*The information provided on the Internet is a non-binding description. It does not represent guaranteed properties. The seller is not liable for typing and data transmission errors / changes / input errors. Please check the accuracy of the equipment features directly on the vehicle before purchasing. Errors / subject to prior sale. This advertisement is to be understood as an invitation to submit an offer.

Condition: used, Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit: for cleaning agent application with buffing device for disposal of glue residue on PVC edges -Motor: 1.1 kW -Speed: 2840 rpm -side: adjustable -height: adjustable -Number: 1x aggregates available -Price: per piece -Dimensions: 350/350/H500 mm -Weight: 32 kg Ndsdpfx Alecn Ibqomsa

Condition: used, Year of construction: 2015, Kannegiesser inclined belt conveyor Hopper Filling Funnel GF 2750-470-380 RA1311 This belt conveyor is from the year 2015 and is in good (used) condition. Additionally this conveyor is equipped with a height adjustment and can therefore also be used as an inclined conveyor. Due to the 2-layer PVC belt, the transported goods can be transported at a height of 260 mm up to a height of 750 mm. Due to a constant conveying speed of 0.3 m/s you benefit from a continuous material flow in your intralogistics. Technical data: Conveying length (NL): 2750 mm Framework width (NB): approx. 470 mm belt width (GuB): 380 mm Height / Belt run (BH): from 260 mm to 750 mm rising +/- 50 mm height adjustment Number of support feet: 2 pieces, movable on fixed rollers Load (kg/rm): 30 kg Conveying speed (v m/s): 0.3 m/s constant Drive: TM 113i drum motor Electrical data: 400 V / 50 Hz / 0.3 kW Deflection drum (UT): Ø = 60 mm, crowned steel, galvanized Belt return roller: Ø = 50 mm, galvanized steel, A12 IGM8 Belt: 2-layer PVC belt, black, smooth Year of construction: 11/2015 Construction / Design: CNC-lasered and edged sheet steel construction primed and painted in RAL 7035, fittings electrogalvanized, side guide 1.4016 Special feature / accessories: 1x motor coupling module incl. electrical pre-installation Ndjdpek Aa Swofx Almja 3x light barrier lateral guide on both sides 70-620-840 mm / 80-390 mm high 2x emergency stop switches 1x end plate 640 mm high 1x baffle plate 1x deflection drum cover Execution centerantieb All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 1989, • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 – depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm • Electrical supply: 220 V - 1 phase - 50 Hz • Power consumption (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 Nsdpfxok E Hrbe Almsda • Work table height (mm): 1000 • Edge trimming unit: for processing thick PVC edges • Weight (kg): approx. 120

Condition: used, Double squaring edgebander usable in line or off line as first or second machine CNI control on separate electrical cabinet Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3200 Maximum panel width mm 3200 Min - max panel height mm 10 - 60 Edge thickness in roll min - max PVC-ABS mm 0,3 - 3 Continuously variable feed speed 10 - 40 m\min Motorized pressure rubber belt Bearing track with retractable pin Distance between the retractable pins mm 500 Squaring part composed of (for each side): Rectifier unit with two motors Edging part made up of (for each side): Gluing unit with premelter for EVA glue Nodpfx Alekvrxqsmeda Edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit Staggered gleaning unit with two motors Rounding unit with 4 motors 0-90° inclinable spindle moulder unit Edge scraper group Brush group

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width 10,402 mm Floor length 8,585 mm Overall width 2,550 mm Overall height to upper frame 3,550 - 3,600 mm Overall height to tarpaulin tip 3,710 - 3,760 mm Track width 2,040 mm Distance from kingpin to 2nd axle 6,120 mm Fifth wheel height 1,200 mm Axle spacing 1,310 mm Rear overhang 1,367 mm Ground height 1,400 - 1,450 mm Max. height with tipped body 9,720 - 9,770 mm Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 47.6 cbm Unladen weight 6233 kg The weight is specified with an accuracy of -3%. Wheelbase 1310 Distance: 2nd axle kingpin: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal members with recessed fifth wheel plate area Welded construction, weight-optimized from high-strength S700 steel Side impact protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm fifth wheel height unloaded Rigid axles 3rd lifting axle 1st lifting axle SAF disc axles 3x 9000 kg 22.5 INTRADISC CD 2-speed transmission supports, full load (BPW Gen2 FL/SAF) Hercules) 6 solid PVC fenders Rubber mud flaps with Wielton logo behind the third axle 6 steel rims 22.5-11.75 ET=120 Wheel nut caps Tires 6 standard 385/65/22.5 tires (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted at the front of the chassis (left side)) 30 L water tank (mounted in the middle of the chassis (left side)) 1 dust bag holder on the chassis 2 dust bags Shovel and broom on the chassis, above the fender Rear extendable ladder Interior height 2100 mm Two-wing aluminum combination door, aluminum (1/2 ?) vertical with portal beam Side walls SL interior thickness 2.5 mm, fully welded Front wall tilted at 20 degrees Pallet width version 7 mm floor 2 grain pushers 2 lower tension locks Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) 680 g/m² PVC roll-top tarpaulin with quick-release fastener and aluminum winding tube (with vertical rear end with triangle attachments at the front and rear, center tube welded into the tarpaulin) Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint Body paint RAL 7001 (silver gray) Tarpaint color RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights (2 pcs.) Ndsdpfx Asp Ncb Nolmea 2x 7-pin, 1x 15-pin with EBS connection, without connecting cables to the tractor unit Lighting: Partial LED Aspöck EUROPOINT III 2 LED work lights on the support legs Additional systems Tilt angle indicator Control cable for the lift axle from the driver's cab This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and tire temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheel rims and a device connected to the EBS. Reflective warning signs Partial contour markings with Wielton logo Partial contour markings in white on the sides

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice Ndsdpfxepl Tgmj Almoa - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Nedopp Tkfjpfx Almoda Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group Njdpfx Asu Rim Hslmsda