Used Rebar Bender for sale (757)

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1050 mm plate thickness 3.3 mm pre-bending 3.0 mm Fgjdpfx Aew U U Udsm Eji roll length 1050 mm roll diameter 90.0 mm min. dia. 130 mm engine output 1.10 kW weight 570 kg range L-W-H 1.800 x 800 x 1.130 mm Exhibition machine from 2026 With only approximately 2 operating hours Condition like new Special price upon request Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, sheet width 1250 mm Fgjdpfjxaacvox Am Eei plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, input voltage: 240 V, input frequency: 50 Hz, Kodak Magnus 800 Quantum Platesetter (CTP) — Complete System for Sale Manufactured: March 2009 | Fully Functional | Status: Ready System Overview Offered here is a complete Kodak Magnus 800 Quantum thermal CTP (Computer-to-Plate) line, sold as a full working system including the platesetter, automatic processor, multi-cassette autoloader, chiller, and punch/bender unit. This setup has been in production use and is shown powered on and reporting "Ready" status on its native control software. System Components 1. Kodak Magnus 800 Quantum Platesetter Serial No.: M8G0967 | Manufactured: March 2009 Cat No: 010-00663A Electrical: 200–240V, 50Hz, 15A Pneumatics: 8 Bar Class 1 laser product, CE / CSA (C/US) certified 2. Magnus 800 Multi Cassette Unit (autoloader) Fgodpfx Aszzpwrjm Eoi Serial No.: M8M0488 | Manufactured: March 2009 Cat No: 010-00313A Electrical: Mains 200–240V 50Hz 5A + Platesetter 200–240V 50Hz 5A Pneumatics: 8 Bar CE / CSA (C/US) certified 3. Automatic Plate Processor — Mercury T-HD 1250 (made for Kodak by Heights UK Ltd.) Serial No.: ME10408 | Year: 2009 Electrical: 200–230V, 16A, 50/60Hz, 2W+GND CE, FCC, ETL certified 4. Recirculation Chiller — Neslab Merlin M75 Maintains stable processing temperature for consistent plate output (unit shown active, set to 16°C). 5. Plate Punch/Bender — hu.q CSG-125 Serial No.: 080872092016 | Manufactured: Aug 2008 Electrical: 200–240Vac, 1A, 50/60Hz CE, cUL/US Listed 6. Control Workstation Lenovo ThinkVision display + keyboard running native Magnus 800 controller software (Status / Tools / Miniview / Queue / Cassettes / Messages / Safety). Cassette bays loaded and configured with plate size TP-U 968x651x0.3. Highlights Complete, matched Kodak Magnus 800 line — platesetter, processor, autoloader, chiller, and finishing unit sold together All units date from the same production year (2008–2009), consistent with a single original installation System actively powered up and shown in "Ready" operating state Automatic cassette loading with multiple plate bays configured and stocked Includes integral roller conveyor/output section for plate handling Notes for Buyer Voltage/phase requirements: platesetter and processor both require 200–240V industrial supply (verify local phase configuration — processor listed as 2W+GND) Compressed air supply required (8 bar) for platesetter and cassette unit Buyer should arrange inspection/live demonstration and professional disconnection, rigging, and transport, as with any large-format CTP installation Sold as-is; recommend a functional test run with actual plate material prior to purchase

Condition: used, Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine -Spare part top roller -Drawing with the pictures Fjdpocx T E Rjfx Am Eegi -Max. Sheet width: 2060 mm -Max. Sheet thickness: mm -Roller diameter: 141 mm -Bearing diameter: 75 mm -Transport dimensions: 2690/141/H141 mm -Weight: 290 kg

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Fgsdpfx Asc S N Rijm Eei Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: new, sheet thickness: 45upper roll diameter: 460prebending: 35sheet length: 2600Bottom Roll Diameter: 420Side Roll: 360messurements (LxWxH): 5770 x 2300 x 2585weight approx.: 28500motor: 30 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Fedpfx Amjd Ab Rhs Eogi Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.500,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet width 1070 mm Fgsdpsvki E Sjfx Am Eei plate thickness 4 mm distance between columns 1100 mm diameter of upper rolls 110 mm total power requirement 5,0 KW weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,9 x 1,1 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 15 h, machine/vehicle number: 121282, BENDMAK PRO 120 – Hydraulic three-roll profile and tube bending machine | 2024 | only 15.5 hours of use We offer a nearly new hydraulic three-roll profile and tube bending machine, BENDMAK PRO 120, manufactured in 2024. The machine has been used only minimally. The control system currently shows only 15 hours and 27 minutes of machine operating time and 31 hours and 14 minutes of hydraulic operating time. Operating times can be verified directly on the machine's display – see photos. The machine is fully functional, in very good technical condition, and ready for immediate use. The sale includes an extensive set of interchangeable rolls/tools for bending various profiles and tubes, as shown in the photos. Technical data: Manufacturer: BENDMAK Model: PRO 120 Year of manufacture: 2024 Serial number: 121282 Machine operating hours: 15:27 h Hydraulic operating hours: 31:14 h Type: hydraulic three-roll profile bending machine Shaft diameter: 120 mm Working roll diameter: 390 mm Motor power: 11 kW Fgsdpfezzkvpex Am Eji Power supply: 400 V / 50 Hz Weight: 4,720 kg CE Equipment and accessories: hydraulically controlled lower rolls hydraulic side guide rolls drive for all three rolls separate mobile control panel touchscreen display multiple sets of interchangeable rolls/tools for various profiles and tubes accessories shown in the photos are included in the sale The machine can be inspected and demonstrated in operation on-site.

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Fgsdoimmb Ijpfx Am Eoi Included documentation Movie available!

Condition: excellent (used), Year of construction: 2002, Technical specifications: Working width: 3550 mm Max. bending capacity: 42.0 mm Max. bending angle: 35.0 mm CNC control Diameter of top roller: 480 mm Diameter of 2nd top roller: 540 mm Diameter of side rollers: 480 mm Fjdeittzfepfx Am Ejgi Diameter of central bottom roller: 480 mm Conical bending unit through inclination of the two side rollers Mobile control panel with digital display Hydraulic pivoting bearings Weight: approx. 44 tons Optional equipment: Side bending aid Pivoting bending aid at the top Additional top roller The seller is not liable for typing or data transmission errors. The machine’s appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2023, Layout: Shears Empty weight: 1.700 kg Attachment suited for: Construction machines Warranty: 6 months Selling price: € 12.000, US$ 12.630 MECHANICAL PULVERIZER FOR SALE FROM STOCK SUITABLE TO WORK IN THE DESTRUCTION ZONE MACHINING PROCESS WILL BE DONE AND DELIVERED ACCORDING TO THE MACHINE YOU HAVE ATTACHMENT WEIGHT: 1700KG The mechanical pulverizer is a cost-effective way of demolishing concrete structures and processing concrete on site, reducing transport cost and increasing productivity. Fsdpfx Amsn Tm A Eo Eegi Simple installation, no hydraulics needed. Direct-mount and coupler styles available. Fully greaseable bushings Replaceable four-way rotatable rebar cutters as standard equipment.

Condition: new, number of rollers: 3, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, sheet thickness steel (max.): 4 mm, - Capacity 2050 x 4 mm - Electrically adjustable rear roll - Conical rolling - Swiveling top roll - Braking motor - Emergency stop Fsdepwgcujpfx Am Eogi - Documentation - 400V

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Fgodpfoc S N Nqex Am Eoi Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm Fgjdpfjda I Itjx Am Eji upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Fgsdped Iclrofx Am Esi Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: new, bending length: 1050sheet thickness: 5upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system Fgjdpfx Amed Ab N He Eji - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 725,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6500 € 112.91 € Fjdswiqnwopfx Am Eogi 1 5850 € 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg DEMO MACHINE 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 17300 € 332.16 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm Fsdpfx Amowiqpbe Esgi 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS (PRICES ON REQUEST): (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: used, roller (top) diameter: 140 mm, roller length: 2,030 mm, sheet thickness steel (max.): 4 mm, Akyapak 3 roller mill Fsdswmdw Hjpfx Am Eegi Type 2030 x 140 Roll length 2,030 mm Max. plate thickness 3.5 mm Dia. top roller 140 mm ø Machine dimensions (lxwxh) 3,000 x 750 x 1,100 mm Wire grooves 8/12/15mm Price excluding VAT

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 52700 € 996.03 € 2550 mm 10 mm 10 mm 8 mm 8 mm 6 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 4800 mm 1600 mm 1470 mm 6170 kg Fgjdpfxjyb Syke Am Esi 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 12 Wochen ab Auftrags Fjdpfx Aeyb Syqem Esgi Türkei 25200 € 481.32 € 1050 mm 2.5 mm 2.5 mm 2 mm 90 mm 4,5 m/min 2.2 kW 2250 mm 1000 mm 1500 mm 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request

Condition: used, Year of construction: 1995, sheet width 2100 mm plate thickness 2,0 mm distance between columns 2150 mm roll diameter 90 mm total power requirement 1,5 KW weight of the machine ca. 0,7 t dimensions of the machine ca. 2,5 x 0,7 x 1,3 mm Sheet metal bending machine 3 rollers Fjdpfswrzrrsx Am Ejgi - 2 driven rollers - Foot switch - Emergency stop device

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: Fgjdpsxab Tcofx Am Eji - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 3.0 mm ST pre-bending capacity 3.0 mm ST upper roll diameter 170 mm lower roll diameter 170 mm side roll diameter 180 mm Control konv. 0 380 V total power requirement 3.0 KW weight 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - ?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment * Including digital position display - Manual bottom roll adjustment Fgodpfxsxacfgs Am Eei * Via hand crank - Including conical bending device * Inclined bottom roll and side rolls * Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes * Top roll must be raised before opening the storage (e.g., forklift/crane) - Safety device - Connection cable + connector - 4-way foot switch * 2 buttons for side roll movement (up/down) * 2 buttons for roll movement (left/right) * With 4x new foot switch covers - Operating instructions (English) * Special accessories included: - Brand new top roller with plastic/rubber coating * Suitable for bending non-ferrous metals * Such as copper and aluminum

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 150 mm, roller (top) diameter: 150 mm, side roll diameter: 140 mm, roller diameter: 150 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 18 mm, working height: 800 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 2,800 kg, total length: 3,800 mm, total width: 1,200 mm, total height: 1,100 mm, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BENDING MACHINE NC HYDRAULIC MODEL 2000X6 MM / 4 MM PREBEND PROGRAMMABLE AUTOMATIC ROLLING NC 4 AXIS CONTROLLER Capacity: plate width 2000 mm thickness rolling 6 mm pre-bending 4 mm minimum diameter of rolling D= 180 mm depending on the plate thickness and strength Fgsdpow Hpzwofx Am Eei Rollers length 2050 mm Upper roll size 150 mm Lower roll size 150 mm Rollers hardened surface high strength smooth surface finishing suitable for rolling stainless steel quality plates Conical plate rolling attachment Rotation electric powered on central rollers for bending traction of the plate Pre-pinch load variable upon plate thickness and strength Console electric commands push buttons with digital readout of the 4 rollers on the screen. NC programmable 4-axis to set automatic rolling with save 200 programs in memory front side hydraulic opening to remove the rolled shells speed slow/fast variable safety installation with emergency stop. Instruction manuals for operation and service. Layout mm 3800x1200xH1100 mm Weight 2800 Kgs