Used Rebar Bender for sale (729)

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes Gedpfx Asium Eujggeip - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Condition: new, Year of construction: 2023, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 Gsdshiyadopfx Aggjip weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal CE declaration

Condition: new, Year of construction: 2023, Rebar Bender IB 36 - solid construction - turning table - manual and automatic mode - Pre selection of bending angle 3 piece Gjdpfx Asdibzvoggeip - 2 sideholders - with foot pedal for left and right bending Technical Details: bending capacity 500 N/mm² 28 mm Dimensions 800x900x800 mm weight 350 kg motor 3,0 KW bei 400 V 50 Hz 3 phase

Condition: ready for operation (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm - in checked conditions - machinevideo - ?v=oV49fdNM8dg Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table Gjdpfx Aoxn Tydsggsip - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. range L-W-H 1400 x 700 x 1600 mm good condition (!!) Gsdpfx Asxaaipjggoip with a lot of application tools (stamps/dies) Furnishing: - electro-hydraulic hole punch, with large throat - Material/sheet metal scrapers including scraper plates - Large material support table, with adjustable depth stops - continuous stroke adjustment - freely movable foot switch including protective cover - Forklift pockets for easy transport - side storage area - lots of accessories + tools - including tool cabinet - Matrix base (for special size matrices) - Stamp holders (for special size stamps) - original user manuel

Condition: ready for operation (used), functionality: fully functional, total width: 600 mm, total length: 1,700 mm, overall weight: 183 kg, coil width: 600 mm, mandrel diameter: 80 mm, TECHNICAL DETAILS Max. coil width: 600 mm Mandrel diameter: 80 mm Gijdpoyf Aiwsfx Aggsp MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,700 mm x 600 mm x 800 mm Machine weight: 183 kg Connected load: 400 V

Condition: reconditioned (used), Year of construction: 1994, Min.-max. wire dia. 6 to 14mm (.236″ to .551″) Flying shear (5) indexing rotary arbors (4) pre-feed rolls 80 to 120 mts/min Max. cutoff lgth: 15 meter track Indexing wire/rod collector 30kW (40HP) AC motor Hydraulick motor: 15 kW (20HP) Operators control panel; 380V- 50 cycle – 3ph PLC Control SIMENES S 5 3 vertical payoff units Giodjfkmr Sopfx Aggop Completely refurbished machine

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure Giedpfxju Id Ruj Aggop - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Gijdpfou Ickyox Aggsp Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: bending angle max.: 180 ° working height: 350-550 mm operating voltage: 380 V revolutions per minute: 10-20 U/min number of bars max.: 1-4 mm total power requirement: 1,3/2,1 kW Weight approx.: 690 kg dimension machine xH: 1,2 x 0,87 x 1,2 m Godpfexu Dxqjx Aggsip -Two plate speeds -Mode selector switch for automatic mode, jog mode, continuous operation -Four continuously adjustable counterholder bars without accessories! *

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Special tools and devices on request. Trade-in of used machines. Giodpfxeium Sts Aggop Europe-wide delivery possible.

Condition: used, Year of construction: 1999, connected load frequency 220 V rated current 263/152 Giedpfovvx E Ssx Aggjp weight of the machine ca. 1 t

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Gijdpfsxf Utaox Aggop Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Giodsqfgy Hspfx Aggjp

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Giedpfx Aoncc Huoggsp Dimensions: 200x75x197 cm LxWxH

Condition: used, mileage: 1,001 km, first registration: 01/1999, color: orange, driver cabin: other, gearing type: other, loading space volume: 16 m³, loading space length: 5,600 mm, loading space width: 2,300 mm, loading space height: 1,250 mm, Year of construction: 1999, Vehicle location: Bovenden, steel superstructure, flap Gjdpfxovhig Rs Aggsip Body: Bender tipper body approx. 16m³, hydr. flap opening, roof protection, Hardox body Frame width rear 770mm Body is dismantled from Daimler Benz SK 3544 8x8 ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2001, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Gedpfx Agsygvwdegoip Width: 1800mm Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Roll bending machine Brand: ADFORM Model: HPK-60 Bending capacity: 60 mm Roller diameter: 215 mm Overall length: 1,500 mm Giedpfx Asym R R Ejggop Overall width: 900 mm Weight: 910 kg Total power: 2.3 kW

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 15900 € 305.28 € 50 - 60 mm 180 mm 180 mm 180 mm 3 3.75 kW 6 m/min 60x10 mm / 500 mm; 20x5 m 80x20 mm / 500 mm; 50x5 m 32x32 mm / 400 mm; 12x12 Ø 35 mm / 350 mm; Ø 10 mm Ø 60x2 mm / 600 mm; Ø 15 50x25x3 mm / 450 mm; 20x1 45x3 mm / 600 mm; 20x2 mm 60x60x6 mm / 650 mm; 30x3 50x50x5 mm / 550 mm; 30x3 UPN 80 / 600 mm, UPN30 / UPN 65 / 600 mm; UPN 30 / IPN 80 / 600 mm 1200 mm 850 mm 1200 mm 955 kg 3 mech. driven rolls (brake motor) hardened shafts Giodpfx Agjyn R E Sjgop lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11800 € 226.56 € 60 mm 215 mm 215 mm 3 Giodjwiq S Nepfx Aggsp 1.5 kW 4 m/min 80x20 mm / 1200 mm; 40x10 120x25 mm / 600 mm; 50 x 50x50 mm / 800 mm; 20x20 Ø 50 mm / 800 mm; Ø 20 mm Ø 100x2 mm / 1600 mm; Ø 6 80x40x3 mm / 1400 mm; 40x 70x3 mm / 1600 mm; 40x2 m 70x70x7 mm / 1000 mm; 40x 70x70x7 mm / 1200 mm; 40x 1000 mm 1400 mm 1650 mm 950 kg 3 mech. driven rolls (brake motor) hardened shafts top roll hydraulic adjustable hardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation double foot pedal forfor- and backward drive machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 260 REFERENCES!

Condition: used, Manual pipe bender, pipe bending device, mandrel bending machine Hand-held pipe bender, hand-held wire bending machine, bending machine Manufacturer: MEWAG Bending capacity: max. Ø 16 mm 1 bending tool Ø 15 mm with 25 mm bending radius 1 bending tool Ø 10 mm with 16 mm bending radius 1 bending tool Ø 8 mm with 9 mm bending radius 1 bending tool Ø 6 mm with 8 mm bending radius 1 bending tool Ø 5 mm with 8 mm bending radius - Rotating plate with degree markings - Scope of delivery as shown - Wooden box for storage Dimensions L x W x H: 570 x 480 x 145 mm Weight: 43 kg Good condition Giedpfx Agowhf Hfsgsp

Condition: new, I-beam section - upend 120 x 25 (d 1600) mm bar material dia. max. 140 x 3 (d 3000) mm L-beam 100x100x10 (d 1600) mm square material 140 x 40 x 3 (d 4000) mm I - beam section - flat steel 200 x 35 (d 1000) mm bar material - diameter 70,0 (d 800) mm tool taper 100,0 mm 0 315 mm turning speeds 5,4 m/min. total power requirement 11,0 kW weight 2.240 kg range L-W-H 1500 x 1650 x 2100 mm Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers Gsdpfxexcukyj Aggsip * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Condition: new, I-beam section - upend 100 x 20 (d 2100) mm bar material dia. max. 100 x 3 (d 3000) mm L-beam 80x80x8 (d 2000) mm square material 50 x 25 x 2 (d 600) mm I - beam section - flat steel 120 x 30 (d 600) max.140b mm bar material - diameter 60.0 (d 1000) mm tool taper 80.0 mm oil volume 100 Liter turning speeds 4.2 m/min. weight 1600 kg range L-W-H 1240 x 1375 x 1540 mm Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment * for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers Giodpoxcukgsfx Aggjp * Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x hydraulically adjustable side guides - horizontal and vertical work possible - freely movable control panel - pressure gauge / pressure display for the rollers - CE mark / declaration of conformity - operating instructions in German

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10800 € Godsynnhkspfx Aggjip 207.36 € 35 mm 137 mm 137 mm 3 1.1 kW 7 m/min 35x8 mm / 300 mm 50x12 mm / 400 mm 18x18 mm / 250 mm Ø 22 mm / 200 mm Ø 40x1,5 mm / 500 mm 30x15x2,5 mm / 500 mm 25x25x2 mm / 450 mm 35x35x5 mm / 400 mm 30x30x4 mm / 550 mm 1050 mm 500 mm 1250 mm 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 34200 € 653.22 € 100 mm 315 mm 3 7.5 kW 7 m/min 100x20 mm / 800 mm; 30x10 200x30 mm / 1.200 mm; 160 60x60 mm / 750 mm; 15x15 Ø 75 mm / 800 mm; Ø 15 mm Ø 125x2,5 mm / 1.400 mm; 100x40x4 mm / 1.300 mm; 2 80x80x5 mm / 1.500 mm; 25 100x100x12 mm / 1.000 mm; 100x100x10 mm / 1.000 mm; UPN 180 / 900 mm; UPN 30 UPN 180 / 1.000 mm; UPN 3 IPN 180 / 1.000 mm; IPN 8 1465 mm 2000 mm Gsdsynmrzepfx Aggsip 1700 mm 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES!