Used Rema Dp 15 for sale (78)

Condition: new, Catalog number: RE066 TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operates only with the main blade ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 3200 mm - Movable table stroke 3400 mm - Cutting width with rip fence 1250 mm - Sawtooth plate ⌀350 mm - Rip fence adjustable to angles of 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade 95 mm Knjdpjztncqjfx Aqrjc - Max. cutting height with ⌀350 mm blade 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 650 kg ADVANTAGES – machine is new – CE certificate – warranty The 3200mm version is equipped with a hood and a 45° side guard. The saw does not include blades. Net price calculated according to the euro exchange rate (with larger exchange rate fluctuations, the price may change) Net price: 26000 PLN Net price: 6047 EUR, depending on the exchange rate of 4.30 EUR (Prices may change with larger fluctuations)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless Knodpfx Aozvbldeqrsc The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: like new (used), Year of construction: 1999, Manufacturer REMA Model / machine type DMRT 300 Year of production 1999 Knedpoxn A N Usfx Aqrsc Machine category Crosscut Saw Location: Gorzów Wlkp. Delivery terms: Personal pickup

Condition: new, CATALOGUE NUMBER RE041 Knodpszr Ix Njfx Aqroc - new machine TECHNICAL DATA - saw blade diameter ⌀250 – 350/30 mm - scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - main motor power 4 kW - scoring motor power 0.75 kW - rotational speed 4000 rpm - scoring blade rotational speed 8800 rpm - blade tilt 0 – 45° - max. cutting length 2000 mm - cutting width with parallel fence 1250 mm - splitter ⌀350 mm - spindle flange diameter 87.5 mm - table fence adjustable to 90° – 45° angle, accuracy ±1° - max. cutting height with ⌀300 mm blade 95 mm - max. cutting height with ⌀350 mm blade 120 mm - upper dust extraction port diameter ⌀80 mm - lower dust extraction port diameter ⌀100 mm - weight 620 kg - dimensions of folded machine (length/width/height) 2255x3460x1450 mm Net price: 19900 PLN Net price: 4628 EUR Net price calculated based on the exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: reconditioned (used), Steel grinding machine Manufacturer: REMA Model: DS 07/ST Version with reversible motor 0.22/0.37 kW 1450/2900 rpm Year of manufacture: unknown Serial no.: 022857 Equipment: - Reversing switch for right/left rotation - Benchtop version with chip tray - Wet grinding system - 2 pcs. support table ATS (left) adjustable from -5° to +15° and with spring suspension - 2 pcs. angle stops - Adjustable support table ATK (right) Kedpfx Aqohvu Tmsrsnc for grinding chip guide steps - Steel holder for support table ATK 360° rotatable, pivotable, with height adjustment and knurled screw for adjusting the chip depth - Enlarged protective cover (left) with silicon carbide cup wheel Ø 175 mm with mounting flange - Protective cover (right) for grinding wheels Ø 125 mm with mounting flange - Operating manual Used, as is, no guarantee

Condition: repair required (used), functionality: not functional, REMA DMJA-180 Double-Spindle Multi-Blade Saw Cutting height up to 180 mm Cutting width 300 mm Number of cutting spindles: 2 Spindle diameter: 60 mm Sleeve diameter: 70 mm Maximum saw blade size: 350 mm Motor power: 2 x 30 kW Kjdpfsw Ngiisx Aqrenc Feed speed adjustable up to 50 m/min The machine requires overhaul

Condition: new, Year of construction: 2026, Blade diameter ⌀250 - 350/30 mm Scoring saw blade diameter (works only with ⌀300, 350 mm main blade) ⌀120/20 mm Main motor power 4 kW Scoring saw motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring saw 8800 rpm Blade tilt 0 - 45° Knjdezx Du Tspfx Aqrsc Max. cutting length 2500 mm Moving table stroke 3400 mm Cutting width with the longitudinal ruler 1250 mm Wedge ⌀350 mm Table stop ruler set at an angle of 90° - 45°, accuracy ±1° Max. cutting height with a ⌀300 mm blade 95 mm Max. cutting height with a longitudinal ruler ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: excellent (used), CATALOGUE NUMBER 8062 Technical specifications: - max. main blade diameter 500mm - main blade adjustable up/down and at an angle, electrically - spindle diameter 30mm - spindle locking - with a crosscut fence - with a side fence + angle guide - crosscut fence length 3000mm - cutting width adjustable with the electric guide from the upper control panel 1550mm - with a side fence and an angle-adjustable guide - with a scoring saw - max. scoring saw diameter 120mm - scoring saw motor 0.75kW - main motor 6kW - blade adjustment up/down, adjustable from the upper control panel - angle adjustment, adjustable from the upper control panel - 2 types of rotation speeds - pressure beam - START/STOP switch in the crosscut table - angle guide - table extension 2000x1530mm - large blade guard - diameter of the dust extraction nozzle 100mm, 120mm - dimensions (L/W/H) 3600x3800x1600mm - weight approximately 1200kg Knsdpfezxq Ugjx Aqrjc Advantages: - Polish production - with a scoring saw - START/STOP switch in the crosscut table - pressure beam - original DTR documentation - unpainted - used saw, very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, Edge thickness 0.4 – 3 mm Glue board thickness 12 – 45 mm Difference between edge width and board thickness max. 4 mm Minimum length of glued boards 190 mm Minimum width of glued boards 90 mm Mechanical feed speed 7 m/min Glue temperature 130–250°C Tank capacity 1.2 l Pre-milling head speed 12,000 rpm Linear milling cutter speed 10,500 rpm Cutting blade speed 8800 rpm Polishing disc speed 2800 rpm Installed power 4.91 kW Feed motor 0.75 kW Kodjzp Nycopfx Aqrjnc Heating motor 0.25 kW Final cutting motor 0.18 kW Linear milling motor 0.55 kW Polisher motors 2 x 0.18 kW Pre-milling motor 0.5 kW Compressed air pressure 250 L/min Extended table width (steady rest) 560 mm Working table height 856 mm Shipping dimensions (L x W x H) 2820 x 720 x 1320 mm Net/gross weight 500 / 632 kg

Condition: used, REMA double grinding wheel with dust extraction Grinding wheel diameter 250 mm Knjdpoz D D Ibofx Aqrec Rated power in kW: 0.75

Condition: new, Year of construction: 2026, Feed speed 9 m/min Board thickness 12 - 45 mm Minimum board dimensions (L x W) 90 x 170 mm Worktable height 960 mm Table extension (steady rest) 560 mm Extension connector ⌀ 125 mm Installed power 6.1 kW Knjdpfx Aezp Nz Hoqrjc Pre-milling 3000 rpm Front/back 12,000 rpm Top/bottom 12,000 rpm Polishing 3000 rpm Machine dimensions 3960 x 720 x 1748 mm Weight (net/gross) 800 / 950 kg Feed motor power 0.75 kW Glue tank heater motor power 1.315 kW Pre-milling motor power Milling 1.5 kW Plate heating motor power 0.125 kW Glue spindle motor power 0.25 kW Front/rear cutting motor power 0.37 kW Top/bottom cutting motor power 0.37 kW x2 Corner trimming motor power 0.37 kW Polisher motor power (top/bottom) 0.12 kW x2 (3-phase), 0.18 kW x2 (1-phase) Touchscreen control panel Air consumption 350 L/min Minimum extraction power 5 kW (for effective dust extraction from the edge bander)

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (only works with ⌀300, 350 mm blades) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Rotational speed 4000 rpm - Scoring blade rotational speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 1600 mm - Cutting width with parallel guide 1250 mm - Sawtooth blade ⌀350 mm - Arbor flange diameter 87.5 mm Kjdpfx Aqezrk N Rerjnc - Table fence adjustable to 90° – 45° angle, accuracy ±1° - Max. cutting height with ⌀300 mm blade, 95 mm - Max. cutting height with ⌀350 mm blade, 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Dimensions of folded machine 2020x3380x1200mm Net price: 16000 PLN Net price: 3721 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in case of significant exchange rate fluctuations)

Condition: good (used), REMA DMNE-650/35 RADIAL SAW For sale is a used radial/swing arm saw from the Polish company REMA S.A. from Reszel. Model DMNE-650/35, manufactured in 1998, serial number 346. The machine has a robust cast iron construction and an adjustable arm, allowing for cross cuts and cuts at various angles. TECHNICAL DATA: - manufacturer: REMA S.A. Reszel - model: DMNE-650/35 - serial number: 346 - year of manufacture: 1998 - type: radial/swing arm saw - blade diameter: 350 mm - maximum cutting width: up to 650 mm - maximum cutting height: approximately 95 mm - motor power: 2.2 kW - power supply: 380 V - type of current: 3-phase - frequency: 50 Hz - rated current: 5.6 A - spindle speed: approximately 2920 rpm - spindle end diameter: 30 mm - arm adjustment in the vertical plane: ±90° Knsdpfxoz Alxhe Aqrjc - carriage adjustment in the horizontal plane: ±90° - carriage adjustment in the vertical plane: ±90° The machine is equipped with a 3-phase electric motor and control with an on/off button. The arm can be moved and adjusted relative to the table, allowing for various types of cuts. CONDITION: The machine is used and shows visible signs of wear. The visual condition is shown in the photos. Sold exactly in the condition and configuration shown in the photos. The machine can be inspected on-site before purchase.

Condition: used, rotary table dia. . mm max. dia. of grinding wheel . mm with manual ongoing . 0 manually feed . 0 0.4 KW Knjdpfx Aqeyqu Sberjc The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2000, ja 094089 Kjdpfx Ajw Sydxsqrjnc spindle speeds: linka 2100 weight of the machine ca. 600 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, saw blade diameter: 400 mm, max blade diameter 400 mm cutting height adjustment angle adjustment 0″- 45″ spindle diameter 30 mm blade guard max. cutting width with guide bar 1270 mm 2 types of rotation speed 3000 / 4500rpm table top dimensions 1020 x 1120 mm worktop extension worktop extension undercutter max diameter of undercutting saw blade 130 mm diameter of undercutter spindle 20 mm undercutter motor 0,75 kW motor 4 kW overall dimensions L/W/H 2930 x 2600 x 1450 mm Kjdpfxeqwduxj Aqrjnc weight 711 kg

Condition: excellent (used), Catalog number 7834 TECHNICAL DATA - max. diameter of the main blade without a scoring blade: 400mm - max. diameter of the blade with a scoring blade: 350mm - max. cutting height for a 350mm blade: 100mm - main blade adjustable up/down and at an angle - large blade guard - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 1400mm - cutting width with guide: 1180mm - with a side fence - guide on the side fence adjustable at an angle - with a scoring blade - max. diameter of the scoring blade: 120mm - spindle diameter: 20mm - power of the main blade motor: 4kW - scoring blade motor: 0.75kW - 2 types of rotation speeds - table dimensions: 1120x1020mm - table dimensions with extension: 1820x1720mm - diameter of the dust extraction port: 130mm - dimensions (L/W/H): 3650x2150x1450mm - weight: 720kg Knedpjzxhhdsfx Aqrec ADVANTAGES – Polish production – with a scoring blade – DTR documentation – used saw, very good condition Net price: 11900 PLN Net price: 2767 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to higher fluctuations)

Year of construction: 2008, condition: like new (used), main engine 3.9 kW Kedomi Nz Dopfx Aqrjnc trolley length 1370 mm disc diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max 90 mm two types of disc rotation speed 3700 and 5000 RPM

Condition: ready for operation (used), Technical data: Power kW 0.9 Connection 380 V/50 Hz Speed 2,900 rpm Disc dimensions 175/60/51 Weight 117 kg Equipment:  2 ATS tables (spring-mounted table)  2 diamond cup wheels 175x60x51 mm Ksdpfx Aqsza Dwxjrsnc  Column design

Condition: ready for operation (used), Year of construction: 1996, Grinding wheel diameter: 280 mm Grinding wheel width: 30 mm Grinding wheel speed: 2900 rpm Electrical connection: 400 V, 0.9 kW Space required: 600 x 270 x 1100 mm Knedpfx Aqezhu Dwersc

Condition: new, Year of construction: 2025, Blade diameter ⌀250 - 350/30 mm Scoring blade diameter (work only with ⌀300, 350 mm blade) ⌀120/20 mm Main motor power 4 kW Scoring motor power 0.75 kW Rotation speed 4000 rpm Rotation speed of the scoring blade 8800 rpm Ksdpfjv Dtuqex Aqrsnc Blade tilt 0 - 45° Max. cutting length 3200 mm Moving table stroke 3400 mm Cutting width with longitudinal ruler 1250 mm Wedge ⌀350 mm Shaft flange diameter 87.5 mm Table stop ruler set to an angle of 90° - 45° accuracy ±1° Max. cutting height with ⌀300 mm blade 95 mm Max. cutting height with blade ⌀350 mm 120 mm Upper exhaust port diameter ⌀80 mm Lower exhaust port diameter ⌀100 mm Weight 650 kg

Condition: used, Year of construction: 2005, grinding wheel diameter 200 mm wheel width max 32 mm grinding wheel hole diameter 51 mm grinding wheel speeds 2900 U/min engine output 0,9 kW Kodpfsw Nrvujx Aqrsnc Double wheel grinder mounted on stand

Condition: excellent (used), Steel grinding machine REMA 2 speeds 1450–2900 Knjdewv Smnopfx Aqrec

Condition: excellent (used), Cup wheel diameter: 180 mm Cup wheel speed: 2,900 rpm Electrical connection: 380 V, 2,900 rpm, 0.9 kW Oscillating table dimensions: 200 x 350 mm Oscillating table, tiltable Knsdsw Tk Nuspfx Aqrsc Oscillating table swivels +/- 20° Required space: 750 x 350 x 1,270 mm

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h Kjdpfxjt Dxwaj Aqrsnc height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va