Used Rent Bavaria for sale (760)

Condition: good (used), functionality: fully functional, “Steinert NES 150 210 E 6119” for Sale Iisdpfsy S Tv Nsx Akxsf Manufacturer: Steinert Type: NES 150 210 E 6119 Belt widthness: 1.500 mm (New belt) With control-unit. Overhauled, balanced, sandblasted and painted.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GENERATORE DI CORRENTE usato ma seminuovo VISA GEN_SET V350GX da 280KW 350kVA, motore VOLVO PENTA. LAVORATO SOLO 28H ,COME NUOVO. Iisdpfx Akszhkr Dsxof

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Iodpfx Akjx A Imzsxsif Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. Iijdpfxozfy R Ds Akxsf This module is part of our rental fleet.

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) Isdpfx Aexb S Exjkxoif With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam gantry including 2 welding heads, each with 3 wires (without power supply). Welding possible from ø6.5 to ø11 m. Expandable up to ø13 m. 5 systems. Inspection welcome near Flensburg. B2B sales only. Iodpfxsyt Ri Uo Akxeif More photos available upon request.

Year of construction: 1989, condition: used, machine/vehicle number: 89 051 371, Primary voltages: U1 V1 W1: 400 V U9 V9 W9: 257 V U10 V10 W10: 246 V U11 V11 W11: 235 V Secondary voltages: U1 V1 W1: 710 V at 400 V, U3 V3 W3: 650 V Primary voltage: U4 V4 W4: 540 V Iisdpfx Akedqrl Sjxof U5 V5 W5: 475 V U6 V6 W6: 475 V U7 V7 W7: 446 V U8 V8 W8: 430 V Rated power: 50 kVA Space requirement: 870 x 680 x 850 mm Weight: 300 kg

Condition: used, 2 Pcs. “Goudsmit 1.500mm.” for Sale Manufacturer: Goudsmit Magnetics Belt widthness: 1.500 mm (New belt) Included: Iiodpfxjw R N Tao Akxjf – New Control-unit Eddy Current Separator will be overhauled, sandblasted and painted.

Condition: used, High-current EMC filter SCHAFFNER, type FS 20364-1200-99 3 phases, 3 x AC pre-stage, mains connection module, mains filter Ijdpfx Aksd D Dh Aexoif Input voltage: 3 x 400 VAC Input frequency: 50 / 60 Hz Rated current: 3 x 1200 A Dimensions W x H x D: 135 x 260 x 235 mm Weight: 27.5 kg Very good condition, from warehouse clearance, unused 2 units available, price per unit.

Condition: used, Electric motor, E-motor VEM Three-phase motor, heavy current motor Model: IE3-W41R 250M 2 LL TPM HW Mounting: B3 Frame size: 250M Motor power: 55 kW Motor speed: 2970 rpm Current draw: 92 amps Mains connection: 400 volts, 50 Hz Shaft diameter: Ø 60 mm Shaft journal length: 155 mm Keyway width in shaft: 18 mm - Foot-mounted motor with 4 mounting holes Ø 24 mm, hole spacing 400 x 350 mm Motor housing length without shaft: 780 mm Motor housing length with shaft: 930 mm Ijdpfx Akjxuk Ilexsif Space requirement L x W x H: 730 x 400 x 520 mm Net weight: 510 kg Good condition

Condition: used, This listing is for a Bio-Rad PowerPac HC High-Current Power Supply. Iisdpfx Akoxx Ai Aexsf The unit is in full working condition and is ready for immediate release. Elevate your laboratory’s performance with the Bio-Rad PowerPac HC High-Current Power Supply, engineered specifically for high-current applications like western blotting and high-throughput electrophoresis. This robust power supply delivers exceptional reliability and precision, ensuring your experiments achieve optimal results every time. Key Features: Powerful Output: With an impressive output of 250 V, 3.0 A, and 300 W, the PowerPac HC is designed to handle demanding electrophoresis tasks effortlessly. Intuitive Controls: The fully adjustable voltage, current, and power settings allow for tailored configurations, while the two-line, 16-character LCD display provides clear visibility for easy programming and monitoring. Versatile Applications: Ideal for western blotting with Bio-Rad blotting cells and suitable for a variety of high-current applications, this power supply adapts to your laboratory needs. Benefits: Enhanced Experiment Efficiency: The intuitive programming enables multistep methods and timed runs, allowing you to choose between constant voltage, current, or power output for maximum flexibility. Safety Features: Built-in protection against short circuits and excessive voltage incidents ensures the longevity of your equipment, giving you peace of mind during critical experiments. Real-Time Monitoring: Stay informed with real-time voltage and current monitoring, ensuring that your processes run smoothly and effectively. Choose the Bio-Rad PowerPac HC High-Current Power Supply for unparalleled performance and reliability in your laboratory. Experience the difference in your high-current applications and achieve the results you desire with confidence.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 The Ion OneTouch 2 Instrument performs template amplification as part of the manual workflow for the Ion PGM, Ion Proton, Ion S5, and Ion S5 XL systems. It provides scalable template preparation for all Ion semiconductor chips. The instrument has a small footprint and fits easily on any bench top. For a fully automated workflow, please see the Ion Chef Instrument. The Ion OneTouch ES enrichment module is not included in this purchase. For both the Ion OneTouch 2 Instrument and ES module Iedpfxoxzg T Do Akxjif Efficiency and flexibility The Ion OneTouch 2 instrument integrates multiple manual template preparation steps into a single system. This enables parallel processing of multiple samples per day through modular design. It is flexible and supports scalable template preparation for all Ion semiconductor sequencing chips with up to 400 bases on the Ion PGM, up to 200 bases on the Ion Proton System, up to 400 bases on the Ion 520 and Ion 530 chips, and up to 200 bases on the Ion 540 chip. The need for gas is eliminated by the use of a peristaltic pump. Contributing technologies At the heart of the Ion OneTouch 2 Instrument are three breakthrough technologies that enable automated delivery of the template Ion Sphere particles. The first is the reaction filter that creates millions of microreactors in which clonal amplification occurs. The second is the fully integrated thermal cycler and disposable path amplification plate that enables robust thermal cycling of the microreactors. The third is the integrated centrifuge, which recovers the template Ion Sphere particles. Altogether this allows the OneTouch2 instrument to deliver massively parallel clonal amplification and recovery, all in a small bench top footprint.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch ES Ijdsxzg T Repfx Akxsif This unit does not come with the Ion Torrent OneTouch ES Enrichment component of the Ion OneTouch 2 template amplification & ample preparation system 110-240VAC 50/60Hz 0.5 Amp

Condition: good (used), Part suitable for: trucks Technical condition: good Visual condition: good Price: On request VAT/margin scheme: VAT deductible Type number: 789368 Iedpfx Akeyc Echoxsif

Condition: good (used), Part suitable for: trucks Technical condition: good Visual condition: good Price: On request Iedpfsyc Eczox Akxjif VAT/margin scheme: VAT deductible

Condition: good (used), Part suitable for: trucks Technical condition: good Iedoyc Ecujpfx Akxeif Visual condition: good Price: On request VAT/margin scheme: VAT deductible Type number: 789588

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 700 kg, total length: 900 mm, total width: 2,100 mm, total height: 2,200 mm, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 5 bar, electrical fuse: 20 A, The Ring Tester is engineered for automated crack detection on ring-shaped components, such as bearing races and gears, utilizing the eddyvisor C. In addition to crack testing, customers can inspect for grinding burn on the inner and outer rings of roller bearings. For this purpose, a robot manipulates and guides the sensor precisely along the contours of the test part. Testing is conducted using up to two probes. All relevant scanning parameters and communication protocols for controlling the eddyvisor C are integrated into the robot scanning program. Iedpfx Ajyx E D Ejkxjif At the heart of the system is the eddyvisor C, a two-channel eddy current instrument, ensuring highly reliable detection of cracks and grinding burns. Process automation is achieved by an integrated Stäubli TX2-60 robot. The entire system is managed and operated via a control cabinet equipped with an integrated control and operating panel. A vertical spindle with chuck reliably clamps each test component during the inspection process. Non-conforming (NOK) parts identified during testing are automatically discharged to one of two designated NOK storage conveyors. Separate storage locations for reference and master parts facilitate calibration and ongoing quality assurance during operation. The system also incorporates the ibg Optical Reflection Sensor (iORS), enabling precise, non-contact inspection of rings.

Condition: ready for operation (used), 1 x ENABL SAW circumferential seam C&B, including 1 welding head with 3 wires. Welding range: ø6.5 to ø11 m. Expandable up to ø13 m. 1 system. Already disassembled without power (currently likely without PSU, but a PSU may be available). Isdpfeyt Rmgsx Akxoif Inspection welcome north of Flensburg. B2B sale only.

Year of construction: 2013, condition: excellent (used), Opportunity! We can offer you this very well-maintained "Vitek 2 XL" system from the global brand BioMérieux, firsthand from the federal government's inventory. As a fully automated system for the rapid detection of pathogens and resistance, the Vitek 2 system has become an indispensable part of virtually every medical laboratory in the world! The system was acquired by the federal government in November 2013 and continuously inspected and maintained in accordance with the maintenance contract. The last inspection and maintenance was carried out until August 2023. At the end of 2022, the device was taken out of service in working order due to a new purchase. All components are in top optical and technical condition, with no significant damage. Minor scratches and discoloration on the housing are due to normal operation and do not limit its use in any way. Description: The VITEK 2 system provides everything healthcare laboratories need for rapid and accurate microbial identification and antibiotic susceptibility testing. The system is used for the microbiological identification of pathogens of animal origin. It enables rapid and accurate antibiotic susceptibility testing and resistance detection. The automated system performs same-day susceptibility testing (with results in as little as 5 hours, supported by clinical trial data). This significantly improves veterinary laboratory workflow and optimizes clinical veterinary microbiology. The VITEK 2 system offers a comprehensive range of the most important susceptibility tests for veterinary diagnostics and is characterized by high performance and the ability to detect even low-level resistance and emerging resistance mechanisms (AmpC, ESBL, MBL, etc.). The software is also updated annually to incorporate any taxonomy developments or policy changes. The VITEK 2 disposable cards are sealed to prevent contamination during the bacterial suspension filling process. Isdpfx Ajwi Smuokxsif Scope of delivery: - Vitek 2 XL including power supply unit - PC with pre-installed software - UPS, monitor, keyboard Dimensions (W x D x H): 1400 x 710 x 670 mm. Weight: 145 kg Shipping will be made within three business days after receipt of payment via insured freight forwarding. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and pallet, is approximately 200 kg. The pallet is oversized! Sales are exclusively for businesses; you will, of course, receive an invoice with VAT shown. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Iedpfx Akexl Dq Usxsif

Year of construction: 2022, operating hours: 30 h, condition: new, functionality: fully functional, working width: 2,000 mm, As good as new condition Bakker Magnetics 104 Excenbtric eddy current separator for sale. Trade fair demonstration unit. The latest eccentric eddy current "104" X Ecentric was specially developed and designed for the separation of non-ferrous metals from e.g. bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has a very high number of poles and operates at a speed of 3,600 rpm. Iisdpfx Aker D R Svoxof The 104 rotor generates a field frequency of 1.56 kHz

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Isdpfxsu Sqqis Akxoif HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: new, Year of construction: 2025, I am selling several machines, equipment, etc. for woodworking here, including forklifts, aerial work platforms, as well as accessories and spare parts. Therefore, be sure to check out my other auctions as well! Panel saw, table saw, circular saw, joiner's circular saw, format saw WH Machines Type: Z45 - 400E Professional New Isdpfx Aeh Hauyskxsif wide aluminum format carriage 320 cm with hard metal round bar guide system Width approx. 415 mm Extension table with extendable aluminum rip fence, incl. 2x folding stop Rip length up to approx. 300 cm Electric height adjustment of the saw blade Stable round bar guide for the saw unit. Electric tilting of the saw blade up to 45° with digital display of the tilting angle Precise tilting segment guide for the saw unit. Parallel fence up to 125 cm with fine adjustment Stable 50 mm round bar guide Parallelogram guard with upper extraction can be folded away for vertical workpiece cuts. 2 different speeds adjustable (4000/600 rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scoring saw with 120 mm scoring saw blade and electric height adjustment Motor power main motor 5.5 kW with overload protection and thermal monitoring. Motor power scoring saw 1.1 kW Body made of stable 6 mm box construction with reinforcement Stable cast iron worktop incl. rip fence wedge and eccentric workpiece holder The machine can also be purchased through a lease-purchase agreement with a term of 36 months. This offer is a lease-purchase leasing offer via DLL Leasing with a term of 36 months. Credit check and processing are carried out by DLL Leasing. Other terms and conditions available upon request. Please inquire for further data, delivery times and availability. Depending on availability, the machine can be inspected and tested at our warehouse. A prior inspection is highly recommended; simply leave your phone number by email, and I will get back to you regarding an inspection appointment. Subject to prior sale, all information without guarantee. The machines can be picked up by the customer or shipped via freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; depending on the distance and unloading possibilities, they may vary; please inquire. An invoice with VAT will be issued.

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Iedpfjyluicjx Akxjif Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: good (used), functionality: fully functional, overall weight: 70 kg, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello The offer concerns rental of a gitterbox type container Ijdpfx Aoula Ayekxoif for a period of one day one piece 1 eur/brut/unit/day For a larger quantity for a longer period of time price to be determined. Technical parameters of the container - dimension 1240 x 835 x970 mm - load capacity 1500 kg - color RAL 7030 - weight of container 70 kg We offer other types of containers.