Used Rent Bavaria for sale (727)

Year of construction: 2022, operating hours: 30 h, condition: new, functionality: fully functional, working width: 2,000 mm, As good as new condition Bakker Magnetics 104 Excenbtric eddy current separator for sale. Hodpsr D R Svefx Aqrep Trade fair demonstration unit. The latest eccentric eddy current "104" X Ecentric was specially developed and designed for the separation of non-ferrous metals from e.g. bottom ash, electronic scrap or small metal fractions. The high-speed magnetic rotor in this machine has a very high number of poles and operates at a speed of 3,600 rpm. The 104 rotor generates a field frequency of 1.56 kHz

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data Hodpfjyluicjx Aqrsp 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine Hjdpju Sqqiefx Aqrop TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: good (used), functionality: fully functional, overall weight: 70 kg, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello The offer concerns rental of a gitterbox type container for a period of one day one piece 1 eur/brut/unit/day Hodpfx Aeula Aysqrjp For a larger quantity for a longer period of time price to be determined. Technical parameters of the container - dimension 1240 x 835 x970 mm - load capacity 1500 kg - color RAL 7030 - weight of container 70 kg We offer other types of containers.

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminum, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. Hedsu Dg Uhopfx Aqrjp Wps separators are used in the recovery of: non-ferrous metals from the recycling of electronic waste non-ferrous metals from car recycling metals from foundry waste aluminum in glass recycling processes non-ferrous metals from steel waste non-ferrous metals from municipal waste Description of Operation: The material delivered by the vibratory feeder is placed on the conveyor belt of the eddy current separator. The separator belt transports the material toward the high-speed magnetic rotor. The magnetic rotor creates high-frequency magnetic field by using maximized system of alternating magnetic fields. The alternating magnetic field induces eddy currents in metals. These currents counteract the external field and lead to the rejection of colored metals outside the material stream. A divider installed at the end of the separator is provided for the separation of materials. The central magnetic rotor has been designed to handle the smallest materials, providing the ability to recover particles up to 1 mm in diameter. We also have larger sizes of eddy current separators - catalog in documents.

Year of construction: 2024, condition: new, WPS Eddy Current Separator, Magnetic Series. Eddy Current separators from the Magnetic Series are mainly used in the waste recycling industry. The use of eddy currents allows for the recovery of non-ferrous (non-magnetic) metals from loose waste such as aluminium, copper, brass etc. The WPS separators are characterized by high separation accuracy due to the original solutions by ZŁOMIARZE, which guarantees high profitability of waste recycling. WPS Separators are used in the recovery of: • non-ferrous metals from the recycling of electronic waste • non-ferrous metals from car recycling • metals from foundry waste • aluminium in glass recycling processes • non-ferrous metals from steel waste • non-ferrous metals from municipal waste To ensure the longevity of the equipment, the ZŁOMIARZE, as one of few companies, has introduced an improvement in the form of the central cooling of the bearings of the magnetic rotor, thanks to which the service life of the machine has been extended even several times. Technical Specification: • Magnetic field source – NdFeB magnets • Smooth adjustment of magnetic rotor speed – 0-3000 rpm • Belt speed adjustment • Belt position control system • Magnetic rotor cleaning cleats • Belt cleaning scraper • Material divider adjustable in two levels • Bearing cooling system (greatly extends bearing life) • Control panel with safety check For our non-ferrous metal separator we offer additional devices to make you separation process easier: • vibratory feeder • belt conveyors • magnetic drum/belt separators Hedpfx Aqsiqxtborsp For more information please download our catalog. If you're interested in our products, please contact us!

Year of construction: 2022, operating hours: 596 h, condition: used, functionality: fully functional, overall weight: 10,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0402, EDDY ACTIVE is an eddy current separator with an eccentric pole wheel for metal sorting. Hsdpoxgdg Eofx Aqrjp The magnetic system enables highly efficient separation of non-ferrous metals from various waste streams thanks to its exceptional strength. • Very powerful eccentric magnetic system • Automatic splitter adjustment • Integrated belt tracking control • Rotating belt scraper • Robust and compact design • Low maintenance This module is part of our rental fleet.

Condition: used, functionality: fully functional, Yokogawa EJA110E Differential Pressure Transmitter, Specifications: Supply 10.5-42 VDC Hedpfx Aqjufr H Norop Output 4-20 mADC MWP 25 MPA Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Hedpfex Ezkhox Aqrsp

Condition: used, empty load weight: 3,980 kg, maximum load weight: 8,020 kg, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/2021, next inspection (TÜV): 11/2023, loading space length: 7,210 mm, loading space width: 2,460 mm, loading space height: 2,400 mm, loading space volume: 42 m³, suspension: air, tire size: 265/70 R17,5, color: yellow, gearing type: mechanical, Equipment: ABS, tail-lift, Unladen weight: 3980 kg, permissible total weight: 12000 kg, loading space (L W H): 7210 mm x 2460 mm x 2400 mm, tire size: 265/70 R17.5, loading space volume: 42 m³, 1st axle: , 2nd axle: , air-air suspension, tail lift, electronic braking system EBS, telematics system, battery box including bracket and 2 batteries, trailer charging cable including spiral connection cable, errors and changes excepted. Vehicle location: Hof/Bavaria. This vehicle can also be rented to businesses based in Germany. Hedpfsv Nb Aasx Aqrsp

Condition: used, maximum load weight: 31,640 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2027, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,730 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle SCHWARZMÜLLER Full-ALU Walking Floor Semi-Trailer 91 cbm First registration Internal dimensions (LxWxH): 13,500 x 2,470 x 2,680/2,780 mm Fifth-wheel height: 1,150 to 1,200 mm Axle distance: 1,310 mm Unladen weight: 7,380 kg ALU chassis SAF axles with large 430 mm disc brakes, reinforced "Off-Road" version WABCO trailer EBS with roll stability support (RSS) 1st axle lift axle Aluminum air tanks 6x 385/65 R 22.5 tires JOST full-load crank landing gear ASPÖCK full-LED lighting 4 x LED work lights Toolbox rear left Hjdpjyrlcgsfx Aqrop Full-length seam-welded interior wall profiles CARGOFLOOR moving floor with 21 slats, material thickness 8 mm ribbed Remote control operation Rear end plate made of stainless steel 3 bows, reinforced for waste transport Reinforced roof tarpaulin PANAMA 900 g/sqm Swinging rear cross beam With grain hatch in left door leaf 15 pairs of recessed lashing rings in the end profile RENTING is the new BUYING – available from us immediately, also in FULL-SERVICE RENTAL.

Condition: used, Used machine Equipment and technical specifications: Automatic edge feeder Hsdpfx Aqow Nad Herjp Cartridge glue system 4-roll printing unit Cross-cut saw unit Flush trimming unit Combination trimming unit: flush/bevel/radius Radius scraper Buffing unit Edge band thickness 0.3 - 20 mm (depending on unit) Edge band height max. 66 mm Edge band length min. 200 mm Feed rate 8/16 or 12/24 m/min With LIGMATECH workpiece return system The return line of this return system is located above the panel processing level. The workpieces move back to the operator on an inclined plane. Special features compared to the ZHR 0x models: Automatic detection and rotation of parts from transverse to longitudinal Automatic adjustment of the rotation speed to the workpiece length Minimum and maximum workpiece dimensions For longitudinal edge processing: 2200 x 1000 For transverse processing with subsequent rotation: 250 x 120/2200 x 800 Maximum workpiece thickness: 60 mm Location: Bavaria Availability: Short-term

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASE MACHINE DYNESTIC 7507 10.7_Push Processing length: 3,100 mm (without tools) Processing dimension in Y-direction: 2,200 mm CAMPUS V7 CAD/CAM Software, 1 x license incl. CabinetControl Base and material removal simulation Upgrade "CAMPUS "Better Nest" freeform nesting software" Uninterruptible power supply (UPS) Milling unit 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver Hodoygn Ibepfx Aqrjp 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated saw unit for cutting/grooving in X-direction, n(max.) 1,000–7,330 rpm, infinitely variable 1 rear stop rail for the machining field (Field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for HSK holders integrated 2 additional mounts for HSK holders for tool changer 7873. Tool changer 7872, single aggregate magazine swiveling in X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additional (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, alignment complete, dot laser complete, option ZB8 Lubrication complete, central lubrication on encoder side 2 x vacuum suction pads for smooth table surfaces, complete 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction pads for smooth table surfaces, complete 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-off conveyor belt AUT 5 10.7 push-off table Additional extraction via push-off conveyor belt Push-off device on gantry, controlled, incl. simultaneous extraction of the wear plate Label printer Direct Label 7507 and complete touch label light Option ZB74 TouchTool tool length measurement Availability: by arrangement Location: Bavaria

Condition: used, maximum load weight: 1,468 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 05/2021, next inspection (TÜV): 05/2027, total width: 2,550 mm, Year of construction: 2021, Equipment: ABS, 2-axle HÜFFERMANN HPA 20.72 multi-carrier for 2 demountable containers and 1 roll-off container, as well as for transporting construction machinery. First registration Permissible total weight: 20,000 kg Unladen weight: 5,314 kg Loading length: 7,200 mm Air suspension at the front and rear, individually adjustable Tire size: 12-ply 235/75 R 17.5 WABCO trailer EBS with lowerable drawbar with 2 aluminum loading ramps for attachment, stored in the storage space under the loading platform at the rear + versatile + robust design + well-designed, user-friendly construction Hodjzfyh Ajpfx Aqrep + tested load securing system with centering fixture (removable) for lateral securing Also available from us for immediate rental with full service; RENTING is the new BUYING.

Condition: used, maximum load weight: 34,120 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space height: 2,737 mm, loading space volume: 88 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-axle STAS Walking Floor Semi-Trailer, 88 cbm First registration 07/2024, from first owner Mileage only 69,324 km Internal dimensions (L x W x H) 13,513 x 2,475 x 2,536 / 2,752 mm >>> Saddle height 1,200 to 1,250 mm Axle distance 1,310 mm Unladen weight 7,880 kg Chassis made of steel, hot-dip galvanized SAF axles with large disc brakes, 430 mm, reinforced "CD" version WABCO Trailer EBS with anti-roll system RSS WABCO Smartboard with axle load indicator >>> 1st and 3rd axles are lift axles >>> WABCO OptiTurn steering system to reduce the turning radius Air tank made of aluminum Tire size 6x 385/65 R 22.5 Hjdpfsy S Nqcsx Aqrjp Crank-operated saddle JOST full-load Lighting ASPÖCK full LED 4 x LED work lights Toolbox on the rear left Side walls with profile overlaps, completely welded on the inside CARGOFLOOR sliding floor with 21 planks, material thickness 10 mm, ribbed >>> with floor reinforcement for forklifts and full load, sliding bearings Control with WIRELESS REMOTE CONTROL End plate at the rear made of stainless steel Side rails 2 pieces, reinforced waste disposal version Roof tarpaulin, reinforced version >>> Rear crossbar swivels, can be operated from the ground with grain slide in the left door leaf RENTING is the new BUYING, and it is immediately available with us, even in FULL-SERVICE LEASING.

Condition: used, maximum load weight: 22,580 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 11/2022, next inspection (TÜV): 11/2026, loading space length: 11,025 mm, loading space width: 2,490 mm, loading space height: 2,725 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2022, Equipment: ABS, KÄSSBOHRER 2-axle city box semi-trailer with liftgate First registration 11/2022 German registration, first owner Dimensions (L x W x H): 11,025 x 2,490 x 2,725 mm Loading height: 2,675 mm Unladen weight: 7,420 kg Payload: 22,580 kg Fifth wheel height: 1,150 mm Hodpozfxadofx Aqrjp BPW axles with large disc brakes, 430 mm 2nd axle with forced steering system TRIDEC Tires: 4 x 385/55 R 22.5 with tread depth 10 mm ALCOA aluminum rims, Dura-Bright, high-gloss finish WABCO trailer EBS with RSS stability program Air suspension with lift/lower function JOST crank fifth wheel, full load capacity Body: LaSi certificate, Code XL Steel front wall, KTL coated Side walls: Plywood Floor: 30 mm phenolic resin-bonded plywood, forklift axle load max. 7,200 kg Wear plate, steel, 600 mm at the rear Steel rear portal frame Doors: smooth design (fully foldable), with door latch, 4 double-hinge hinges per door leaf and 2 recessed swivel bar locks made of stainless steel White roof made of GRP with 4 integrated LED lamps 2 LaSi rails, right and left, mounted on the side walls Underride guard with DHOLLANDIA DHSMR30 liftgate, lifting capacity 2,500 kg, loading platform length 1,700 mm, with 2 roll stops BDL lock RENTING is the new BUYING; with us, it is also immediately available as a full-service rental.

Condition: excellent (used), mileage: 189,350 km, power: 352 kW (478.59 HP), first registration: 05/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: diesel, fuel tank capacity: 1,185 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, power assisted steering, second fuel tank, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Hydraulic system - Tipping hydraulics - Lane departure warning system - Multimedia system - PTO - PTO - PTO preparation - Radio and audio system - Disc brakes - Side skirts - Speed limiter - Stability control - Auxiliary heater - Sun visor = Special features = XLRTEF5300G460367 = More information = Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Transmission Transmission: TRAXON, Automatic Axle configuration Brakes: disc brakes Front axle: Tire size: 385/65R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: leaf spring Rear axle: Tire size: 315/80R22.5; Dual tires; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70%; Suspension: air suspension Functional Cargo space capacity: 1,185 liters Maintenance, history and condition APK: valid until May 2027 Technical condition: very good Hsdpozhw Irefx Aqrsp Optical condition: very good

Condition: good (used), mileage: 110,350 km, power: 118 kW (160.44 HP), first registration: 10/2020, fuel type: diesel, wheelbase: 4,100 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: Bluetooth, electric window regulation, power assisted steering, = Additional options and accessories = - Radio and audio system - Disc brakes = Special features = Hodpfx Aszhwvijqrsp ZCFC735B605377173 = More information = Number of cylinders: 4 Engine capacity: 2,287 cc Unladen weight: 2,410 kg Payload: 1,015 kg GVW: 3,500 kg MOT: valid until Oct. 2026 Technical condition: good Optical condition: good Warranty: ZCFC735B605377173

Condition: excellent (used), mileage: 240,800 km, power: 199 kW (270.56 HP), first registration: 01/2021, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 5,800 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space length: 80,310 mm, loading space width: 24,450 mm, loading space height: 24,540 mm, Year of construction: 2021, Equipment: central locking, electric window regulation, tail-lift, traction control, = Additional options and accessories = Hedpfx Ajzhwhfeqrep - Aluminium fuel tank - Lane departure warning system - Radio and audio system - Disc brakes - Speed limiter - Sun visor = Specifics = W1T96300310487846 = More information = Technical information Number of cylinders: 6 Engine capacity: 7,698 cc Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Front axle: Steerable; Tire tread depth left: 50%; Tire tread depth right: 50%; Suspension: leaf spring Rear axle: Dual tires; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70%; Suspension: air suspension Weights Unladen weight: 9,065 kg Payload: 9,935 kg GVW: 19,000 kg Functional Tail lift: D'HOLLANDIA, 2,000 kg Maintenance, history and condition MOT: valid until Jan. 2027 Technical condition: very good Optical condition: very good Warranty Warranty: W1T96300310487846 Additional information External length of cargo space: 8031 cm External width of cargo space: 2445 cm External height of cargo space: 2454 cm

Condition: excellent (used), mileage: 364,600 km, power: 353 kW (479.95 HP), first registration: 12/2022, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,495 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, loading space volume: 1 m³, Year of construction: 2022, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, parking heater, power assisted steering, second fuel tank, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Lane departure warning system - PTO preparation - PTO prepared - Radio and audio system - Disc brakes - Sleeper cab - Speed limiter - Stability control - Auxiliary heater - Sun visor = Special features = Hsdpfx Aozhvmteqrjp XLRTEH4300G435795 = More information = Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Transmission Transmission: TRAXON, 12 gears, Automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Front axle: Alloy wheels; Steerable; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: leaf spring suspension Rear axle: Dual tires; Alloy wheels; Tire tread depth inner left: 50%; Tire tread depth outer left: 50%; Tire tread depth inner right: 50%; Tire tread depth outer right: 50%; Suspension: air suspension Functional Body brand: ZF Maintenance, history and condition APK (vehicle inspection): valid until Dec. 2026 Technical condition: very good Optical condition: very good

Condition: excellent (used), mileage: 609,700 km, power: 390 kW (530.25 HP), first registration: 07/2020, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 510 l, brakes: intarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, parking heater, spoiler, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Hydraulic system - Tipping hydraulics - Lane departure warning system - Alloy wheels - Power Take-Off (PTO) - Power Take-Off (PTO) - PTO preparation - Radio and audio system - Disc brakes - Sleeper cab - Speed limiter - Stability control - Auxiliary heater - Sun visor = Special features = XLRTEH4300G318227 = More information = Technical information Number of cylinders: 6 Engine capacity: 12,902 cc Transmission Transmission: TRAXON, automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Hjdpfjzhvb Djx Aqrjp Front axle: Steerable; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf spring suspension Rear axle: Dual tires; Left inner tire tread: 40%; Left outer tire tread: 50%; Right inner tire tread: 40%; Right outer tire tread: 30%; Suspension: air suspension Functional Load space volume: 510 l Maintenance, history and condition MOT: valid until Sep. 2026 Technical condition: very good Optical condition: very good

Condition: excellent (used), mileage: 17,100 km, power: 118 kW (160.44 HP), first registration: 03/2025, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2025, Equipment: Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, traction control, = Additional options and accessories = - Rearview camera - Radio and audio system - Disc brakes = Specifics = W1VVLBEZ5S4445029 = More information = Hjdpfx Aqjzhuyrerep Number of cylinders: 4 Engine capacity: 1,950 cc Unladen weight: 1,966 kg Payload: 759 kg GVW: 2,800 kg MOT: valid until April 2027 Technical condition: very good Optical condition: very good Factory warranty until: 28-03-2027

Condition: excellent (used), mileage: 4,100 km, power: 118 kW (160.44 HP), first registration: 03/2025, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: Apple CarPlay, Bluetooth, air conditioning, central locking, electric window regulation, traction control, = Additional options and accessories = - Rearview camera - Radio and audio system - Disc brakes = Special features = Hodszhtu Uopfx Aqrop W1VVLBEZ8S4444960 = More information = Number of cylinders: 4 Engine capacity: 1,950 cc Unladen weight: 1,972 kg Payload: 753 kg GVW: 2,800 kg Technical condition: very good Optical condition: very good Factory warranty until: 28-03-2027

Condition: excellent (used), mileage: 422,900 km, power: 353 kW (479.95 HP), first registration: 06/2021, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,275 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, power assisted steering, second fuel tank, spoiler, traction control, = Additional options and accessories = - Adaptive cruise control - Aluminum fuel tank - Roof spoiler - Lane departure warning system - Radio and audio system - Disc brakes - Side skirts - Sleeper cab - Speed limiter - Auxiliary heater - Sun visor = Special features = XLRTEH4300G359954 = More information = Brakes: disc brakes Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 40%; Tire tread depth right: 60%; Suspension: leaf spring Rear axle: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40%; Suspension: air suspension Number of cylinders: 4 Engine displacement: 12,902 cc Load space volume: 1,275 l Hsdpfx Ajzhtnueqrsp Technical condition: very good Optical condition: very good Warranty: XLRTEH4300G359954

Condition: good (used), mileage: 271,950 km, power: 96 kW (130.52 HP), first registration: 01/2014, fuel type: diesel, wheelbase: 3,200 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro5, number of seats: 2, Year of construction: 2014, Equipment: ABS, Bluetooth, air conditioning, central locking, electric window regulation, power assisted steering, trailer coupling, = Additional options and accessories = - Radio and audio system - Disc brakes = Special features = WDF63960313854231 = More information = Number of cylinders: 4 Engine capacity: 2,143 cc Unladen weight: 2,004 kg Hedpfozhtl Hsx Aqrjp Payload: 721 kg GVW: 2,800 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) MOT: valid until June 2027 Technical condition: good Optical condition: good