Used Rigid Table for sale (17,420)

Condition: used, Year of construction: 1995, operating hours: 17,720 h, 1995 | Caterpillar 769 C | Used Rigid Dump Truck | 17720 hours | 144761 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nedeyc N Rcopfx Af Iowb 👷‍♂️ Inspected by an independent expert 61 inspection points 51 approved ✅ 8 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Good condition, a few leaks to be repaired, advanced wear on the bottom of the body. Comes with 2 extra tires and 1 rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33792 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 1990, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,120 mm, travel distance Z-axis: 1,250 mm, table load: 3,000 kg, spindle diameter: 100 mm, table length: 1,500 mm, table width: 1,500 mm, feed rate X-axis: 2,800 m/min, feed rate Y-axis: 2,800 m/min, feed rate Z-axis: 2,800 m/min, rotational speed (min.): 1,120 rpm, Table type boring mill TOS VARNSDORF - W100A Nwjdeycvc Sepfx Af Isb MACH-ID 9351 Make: TOS VARNSDORF Type: W100A Year: 1990 3 axis TESLA NS 114  digital read out Tailstock Face plate 800 mm Distance faceplate to boring bar rest 2800 mm Max. diameter off facing 900 mm Under power inspection possible X - Travel: 1600mm Y - Travel: 1120mm Z - Travel: 1250mm W - Travel: 900mm Table Length: 1500mm Table Width: 1500mm Table load: 3000 Speeds / ranges:1120Rpm Power: 11kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:2800mm/min. Feed rate Y-Axis:2800mm/min. Feed rate Z-Axis:2800mm/min. Feed rate W-Axis:2800mm/min. Length: 6710mm Width: 3000mm Height: 3000mm Weight: 14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction Nodjuy H Nqopfx Af Ijwb - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nwsdpfx Aoxdlx Ref Ieb Yorick Diebels

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) 1/4 of the new price !!!!! Perfect printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour. The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintennace done in May 2025. Available: August 2025 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Nwjdpfeun Swbex Af Iob Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: good (used), Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, rotary indexing table, rotary table -Rotary table: Turntable -Hole: Ø 32 mm -Dimensions: 320/280/H75 mm -Weight: 13.3 kg Nwjdsycfyaspfx Af Ieb

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Year: 2004 - Documentation available: No - CE certificate present: No - Serial number: AB/166667 - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Manually adjustable axes: Scoring unit height - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8500 - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Nwsdpfx Ajxdlxksf Ijb

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Njdjycq Ayopfx Af Iewb Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: good (used), Year of construction: 2019, functionality: fully functional, total height: 525 mm, lifting height: 885 mm, empty load weight: 1,600 kg, load capacity: 5,000 kg, overall weight: 1,600 kg, total length: 2,500 mm, total width: 2,000 mm, table width: 2,000 mm, Max. load: 5000 kg Min. height: 525 mm Max. height: 885 mm Nwjdpfxeyat Uyj Af Isb Platform size: 2000 x 2500 mm Featured with: - Handheld controller Country of origin: Germany Motor power: 4 kW Machine LxWxH: 2000 x 2500 x 525 mm Machine weight: 1600 kg

Condition: not inspected (used), table width: 450 mm, table length: 630 mm, T-slots 18 mm. Nedpfx Afsya Hu Hj Ijwb

Condition: used, Year of construction: 1978, total length: 3,400 mm, total width: 1,850 mm, total height: 1,600 mm, - Year: 1978 - Documentation available: No - CE certificate present: No - Serial number: 78-11-11 Nwedpfxsyazbbs Af Ijb - Roller table length [mm]: 3200 - Table width [mm]: 1070 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Cutting height, Scoring unit height - Options: Scoring unit - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 380 - Transport dimensions: 3400mm x 1850mm x 1600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Code: 0285 Brand: ALTENDORF Model: F 45 - CE Standard Panel saw with tilting blade and scoring unit for precise cutting of wood materials, furniture, custom furniture, window frames , doors, panels, plastics, composite materials, aluminum and various - CE Standard Technical data: Aluminum carriage length mm 3200 Nwedpfx Aoydk Rtsf Ieb Hydrualic blade lifting and tilting with foot pedal operation Cutting width parallel guide mm 1300 Max blade diameter mm 400 F30 Cutting height with blade at 90° mm 125 Cutting height with blade at 45° mm 90 Motor Kw 5,5 Electrically adjustable in height and width scoring unit - Blade diameter mm 120 - Motor Kw 0,75 Digital display of the number of revolutions Digital display of the degree of inclination Speed rpm 3000/4000/5000/6000 Control elements on both sides of the carriage Worktable extension Register ‘DUPLEX’ for making square cuts from 0 to 90° with high precision and continuous adjustment Parallelogram protective cover Overall dimensions of assembled machine: mm 3300 x 3200 x 1450 h Overall dimensions for transport: mm 3300 x 2000 x 1450 h Weight kg 1000

Condition: excellent (used), Year of construction: 1983, Used machine M.Nr. V130296 Year of manufacture: 1983 Motor data: 380 V - 50 Hz - 13 A Rigid 30 mm spindle Height adjustment via handwheel Forward/reverse operation Extraction ports: 1 x 140 mm - 1 x 100 mm Max. cutter: 250 mm diameter - Max. slotting tool: 400 mm diameter Speed: 3000/4500/6000/9000 rpm Table length: 1200 mm Table dimensions: 900 mm x 280 mm Weight approx.: 950 kg Nsdpsyb T T Eefx Af Iewb Haffner 3-roller feed Top milling fence with fine adjustment External dimensions W/D/H approx.: 1250/1200/1400 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1990, Lumsden 92ML Rotary Surface Grinder 48" Magnetic Chuck Nodpfxevwc I Ho Af Iswb Year 1990 - Latest ones made Segmental wheel diameter - 711mm / 28" Segments per set - 12 Table diameter and grinding capacity - 1219mm / 48" Max height of wheel to table - 572mm / 22.5" Min height of wheel to table - 114mm / 4.5" Max height of wheel to magnetic table - 457mm / 18" Spindle speed 550rpm Table speeds - 18 & 6 rpm Automatic feed 10 rates - 0.1 - 1.0mm/min (0.004 - 0.040 ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 50-75hp at 960rpm Table motor - 6 /.5hp at 1440/480rpm Feed motor - 0.25hp at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3048mm Floor space 4394 x 3353mm Weight approx 12,200kgs / 12ton

Condition: good (used), 60" Table Complete with coolant tank and sizing Specification - Segmental wheel diameter - 864mm / 34" Segments per set - 16 Table diameter and grinding capacity - 1524mm / 60" Magnetic Table diameter - 1524mm / 60" Max. height of wheel to table - 272mm / 22.5" Min. height of wheel to table - 114mm / 4.5" Spindle speed - 450rpm Table speeds - 16 &5.5rpm Automatic feed 10 rates - 0.1-1.0mm/min (0.004-0.040ins/min) Power elevation - 635mm/min (25ins/min) Spindle motor - 60-100h.p at 960rpm Table motor - 6/2.5h.p at 1440/480rpm Feed motor - 1/4h.p at 1440rpm Elevation motor - 1hp at 720rpm Coolant pump motor - 1hp at 1440rpm Overall height of machine - 3073mm/ 10.1" Floor space - 4394mm/14.5" x 3607mm / 11.10" Approx weight - 16700kgs Nwjdpfx Afouzlnzs Ieb

Condition: new, FACTORY NEW ROTARY TABLES // ROTARY-SLIDE TABLES Nwedom Tv Azepfx Af Ijb Positioning, simultaneous turning, and interpolation Rotary table sizes: 1,000 x 1,000 // 1,200 x 1,200 // 1,500 x 1,500 // 1,800 x 1,800 // 2,000 x 2,000 // 2,500 x 2,500 // 3,000 x 3,000 // 3,500 x 3,500 // 4,000 x 4,000 mm --- The clamping surface can also be round instead of square - Maximum workpiece weight: 6,000 to 80,000 kg Optional sliding axis: 1,000 to 3,000 mm (in 500 mm increments) Positioning accuracy: ±5 arc seconds Only inquiries from Germany will be answered // Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, table length 1220 mm Njdpfx Afoxqrhls Iowb table width 760 mm table height 910 mm weight of the machine ca. 226 kg

Condition: new, Year of construction: 2023, total height: 860 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 2,400 kg, Manufacturer: GERD WOLFF Technical details: - Length 4000 mm - Width 2000 mm - Height 200 mm - Weight 2400 kg Nwsdpfjtrlcvjx Af Ieb - Hole diameter 28 mm - Hole spacing 100 mm Advantages and properties - 3-day gas nitriding process - Increased corrosion resistance - Protection against weld spatter adhesion - Maximum load - Increased fatigue strength - Increase in fatigue strength - Fine scaling - Reinforcement through welded seams and ribs on the underside - Optimum working height from 820-865 mm - 8x height-adjustable legs - With matching accessory set (optional) Our welding tables are manufactured with HT 300 cast quality and nitrided in one piece after nitrided in one piece after mechanical processing. They also have precise fine scaling, which is engraved using laser technology. engraved using laser technology. To ensure appropriate stability, our welding tables are reinforced on the underside reinforced on the underside by means of weld seams and ribs. (See illustrations) In addition, they undergo a 3-day gas nitriding process which, among other things corrosion resistance, fatigue strength and vibration resistance of the tables. tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum 665 mm. This enables a variable working height from 820 to 865 mm Manufacturer: GERD WOLFF Website: Technical Details: • Length 1000 mm • Width 1000 mm • Height 200 mm • Weight 300 kg • Hole diameter 28 mm • Hole spacing 100 mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,400 mm, total width: 1,200 mm, overall weight: 920 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Nwedpfx Afovbbqns Ijb Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,000 mm, total width: 1,000 mm, overall weight: 650 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 1000 mm • Height 200 mm • Weight 650 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Nwjdpfx Afsvbbqze Ieb Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 4 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Year of construction: 1999, condition: used, table length mm table width mm table load t plate width 2980 mm Nwedpfx Ajgxqvzef Iob plate depth 3000 mm plate height 1400 mm total power requirement 11 kW weight of the machine ca. t required space m

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside Nedpfx Asuia I Nef Iowb • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Njdpfx Afjuia Ntj Iowb Technical Details: • Length 2000 mm • Width 3000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: new, Year of construction: 2025, number 40-teilig weight 47 kg condition Neu FIX KIT 40 - The Comprehensive Solution Set for Welding Tables Stock Number: FIX40 Weight: 47 KG Shipping: Pallet Shipping (not included in the price)# CONTENTS 2x Clamping and Squaring Angle 175 x 50 x 175 mm 2x Clamping and Squaring Angle 275 x 50 x 175 mm 4x Stop 100 x 50 x 25 mm 4x Sliding Stop 150 x 50 x 25 mm 4x Large Universal Stop 225 x 50 x 25 mm 2x Clamping and Squaring Angle 75 x 50 x 75 mm 2x Prism D58 x 90° 58 x 50 (H) - 90° 4x 180° Clamp 300 x 300 mm 2x 45° Clamp 300 x 300 mm 1x Round Brush 1x Grounding Device 12x Quick-Release Bolt 28 x 75 mm Clamping range between 70-75 mm. Also available individually and in a 50 mm version. Specifically designed for welding tables, the FIX KIT 40 emerges as a comprehensive 40-piece fixture kit. With a precise bore diameter of 28 mm, it Nsdsw T Uzhspfx Af Ijwb ensures seamless integration and adaptability. Not only is this set robust and durable, but it's also perfectly tailored to the requirements of welding tables. The FIX KIT 40 offers a tailored solution for customizing your tool equipment. The included modules are carefully selected to create clamps and fixtures with the utmost precision and efficiency. This allows you to optimize your workspace according to your specific needs. In a world where adaptability and precision are paramount, the FIX KIT 40 sets new standards. It's not just a kit; it's a key tool that aids you in making your work processes more effective and efficient.

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. Nwedjw Td Aujpfx Af Ieb The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.