Used Rims for sale (2,456)

Condition: used, with 6 heads; Bledpfxoxyttze Agljc the monoblock consists of: - capsule dispenser: - capsule pre-and cripmer Capsule type: champagne cap folding, champagne cap applicator capacity / hour ca.: 5000 working direction: rotating turret, right-left (CCW) Working type: fullautomatic

Condition: used, - with optical orientation for champagne caps - 12 heads for capsule dispensing - 12 heads for capsule crimping Capsule type: optical orientation, champagne cap applicator, champagne cap folding capacity / hour ca.: 8000 Bedpfx Agexyttnoljlc working direction: rotating turret Working type: fullautomatic  

Condition: new, Year of construction: 2026, MBM series machine • easy start-up in the engine efficiency class • designed for smooth and efficient one-person operation • produce complete profiles in one operation and repeat them exactly at any time • Wear-free and maintenance-free direct eccentric drive Standard equipment: • 1 sharp rail 20°, radius 1 mm, offset, 66/24 mm for the pressure beam • 1 insert rail 68/10 mm and 68/24 mm for the bending beam • Motorised rear stop 6-750 mm • foot switch • 16 A connection plug with 5 m cable (within the EU) • connection voltage: 3 x 400 Volt, 50 Hz (within the EU) Bedpjwf Hghjfx Aglelc

Condition: used, machine/vehicle number: 006835, Type of edging: Thin edge, Thick edge Trimming Unit: yes Bsdsrl Utbjpfx Agljlc Max Panel Length: 55 mm

Condition: used, Year of construction: 2011, Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Inline three knife trimmer with integrated counter stacker for production lines in lower and medium speed range. Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 (without waste removal conveyor) Maximum size: 300 x 380 mm Minimum size: 100 x 145 mm Max. mechanical speed: Up to 45 cycles/min. = 2.700/h single copies Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Bedpfxswpfv Aj Aglslc

Condition: good (used), Built in: 2000 Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 7.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Blodexxi Npspfx Aglsc Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device • external knife changing device Equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 50 mm, product length (max.): 330 mm, product width (max.): 330 mm, production capacity: 1,000 unit/h, No reserve price – guaranteed sale to the highest bidder! Three-knife trimmer for high productivity: up to 1,000 cutting cycles per hour! TECHNICAL DETAILS Cutting thickness: 2 – 50 mm Number of knives: 3 Untrimmed format: Maximum: 330 x 330 mm; Minimum: 148 x 105 mm Trimmed format: Maximum: 300 x 300 mm; Minimum: 142 x 100 mm MACHINE DETAILS Dimensions (L x W x H): 2,260 x 1,160 x 1,600 mm Blsdexlzuqspfx Aglec Weight: approx. 1,530 kg FEATURES User-friendly LCD display Flexible processing of various product sizes Fast changeover times of less than 10 minutes Advanced locking system for operator safety

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Bljdpfx Asi Egn Ueglec Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition.

Condition: repair required (used), Marel trimming robot. Has a few parts missing so will be sold as is. Looks to be in very nice condition apart from the missing parts. Machine wasn’t built in 2013. Bodpfx Ajw Rnz Asglolc

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Blodpfxjtq Dl Tj Aglec

Condition: new, Year of construction: 2023, Corner crimping machine FOM INDUSTRIE BAIHA L Machine in stock - Max. profile height 200 mm - Hydro-pneumatic drive - Three pneumatic clamps - Min/max height of blade position from 0 to 180 mm - Kit for profile support - Digital counters for profile positioning - No. 2 right tool-holder - No. 2 left tool-holder - No. 2 knives 2 mm thickness - No. 4 tools 5 mm thickness Bljdpfod E Eimsx Agloc - No. 2 fold-away profile fences

Condition: good (used), Further information available upon request. Bljdpfxswkr Hdo Agloc

Condition: excellent (used), WEILER PRIMUS Type MD-G - Centre height: 125 mm - Centre distance: 400 mm Bsdpfexw H Dbox Agljlc - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix with tool holders - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions: LxWxH 1.3x0.8x1.6 meters / Weight: 450 kg Errors and omissions excepted.

Condition: used, Year of construction: 2011, Perfect binding line Wohlenberg Quickbinder - Trim-Tec 45i Year: 2011 Consisting of Perfect binder Wohlenberg Quickbinder Year: 2011 The Quickbinder from Wohlenberg is intended not only for expanding smaller-sized companies making the jump to quality book binding applications, but also for large, industrial-scale book binding companies who can utilize the machine for the production of superior, high-quality samples and editions. Description: - Motorised setting - Colour monitor with touch screen: Navigator - Solo perfect binder - Hand feeding - Number of clamps: 5 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - Hotmelt side glue unit - Rotary cover feeder - Nipping and pressing station - Lay down device (to the left) Transport system - Escape delivery Three knife trimmer Wohlenberg Trim-Tec 45i Year: 2011 Bljdpfxsw Uxpxe Aglsc Description: - Infeed conveyor from the right - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) - Belt delivery - Waste removal conveyor: Bush KF 110- 80 Year: 1998

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor Blsdewuthwopfx Agljc - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: ready for operation (used), functionality: fully functional, Wurster & Dietz Trimming and Re-Cutting Machine Type FR7 with in-machine adjustment Star-delta soft start Feed roller table Bodpfx Agev I D Shslelc Single-blade spiral roller chip separator Chips discharged into a trolley Main product on the feed roller table

Condition: used, Year of construction: 2000, Saddle stitcher Müller Martini Prima Year: 2000 The PRIMA from Müller Martini is the ideal saddle stitcher for the versatile bookbindery, where the shortest changeover time are decisive. - Number of chain stations: 9 - Horizontal signature feeders: 7 x 370 - Cover feeder: 1529 Bledpfsvxf Sqsx Agloc - Excluding pump(s) Stitching unit Müller Martini 390 - Oblique sheet control - Thickness control - Stitching heads: 2x HK 75 - Reject gate, for incomplete products Trimmer Müller Martini 360 - Sets of knives: 2 Delivery Müller Martini 310 CS-14 - Compensating stacker Description modified on 29-5-2025!

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Bledpfxokvnume Agloc Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Blodpfxskvnuus Aglec Weight: 4100kg Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Year of construction: 1985, condition: excellent (used), functionality: fully functional, Manufactured by Voronezh plant (Russia) Bjdpfx Asxwd Iwjgljlc Year of manufacture 1985 Capacity, ton 1600 Slider stroke, mm 400 Strokes per minute 16 Table size, mm 1600 x 1600 Ram dimensions, mm 1600 x 1600 Slider adjustment, mm 220 Max distance between table and slider, mm 870 Slider ejector capacity, ton 80 Slider ejector stroke, mm 100 Table cushion capacity (clamping), ton 250 Table cushion ejector capacity, ton 25 Motor capacity, kW 110 Press dimensions, mm 4670 x 4370 x 8110 Press weight, kg 141500

Year of construction: 1985, condition: used, largest surface to be machined: 400 x 300 mm speed of the knife spindle infinitely variable: 1600 - 6000 rpm electrical connection: three-phase current 380 V Bsdpfxjb Nxdvs Aglelc space requirement: 900 x 800 x 600 mm

Condition: not inspected (used), For swaging the louvre ends in shutter manufacturing. Bljdpoxuf Rbefx Aglsc

Condition: used, functionality: fully functional, In this offer you buy a used trimmer "Canon 2-Knife Trimmer A1" Object of sale: 1 x Canon 2-knife trimmer A1 suitable for various Canon models. Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: Bjdjwpd Tyopfx Aglelc You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, functionality: fully functional, In this offer you buy a used 2-Knife Trimmer ‘SDD B4K/BT25 2-Knife Trimmer for Xerox’ Object of sale: 1 x SDD B4K/BT25 for various Xerox machines Counter readings: Total: Approx. 37,158 cuts Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test brochure can be seen in the photo Packaging and dispatch: Blsdpfeu S An Dsx Agljc You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: good (used), functionality: fully functional, In this offer you are purchasing a ‘Canon RCT 2 / II’ finishing option as good as new Object of sale: 1 x Canon RCT II suitable for various Canon models Bjdsu Rbb Nepfx Agljlc Counter readings: Total: Approx. 555 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.