Used Riveter for sale (100)

Condition: used, functionality: unexamined, Hydraulic riveting machine. With 2 riveting hammers. Fodexrf S Hspfx Afnopc

Condition: new, Year of construction: 2018, functionality: fully functional, High-performance gas-powered tool for concrete, steel, and solid masonry fixings Driving energy: 105 J Rated voltage: 6 V/DC Battery capacity: 1.5 Ah Number of fixings per battery charge: 3,000 pcs Magazine capacity: 40 pcs Length: 435 mm Width: 124 mm Height: 365 mm Machine weight with battery: 3.7 kg Scope of delivery: 1x new/unused device Fpjdpsxx Dffsfx Afnoc Numerous collated nails and gas cartridges A used machine in very good condition is also available separately. Surcharge: 250 EUR

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high tested maximum temperature: 1000°C electrical connection: 400 V, 13 kW space requirement: 550 x 1600 x 1830 mm Fsdpfxebn I Tzs Afnopc Weight: 492 kg

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Fsdpfjxwu Rcox Afnopc Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: used, Wobble riveting head BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 rivet shaft diameter: max. 10 mm tool diameter: 12 mm rivet head stroke: 40 mm riveting spindle speed: approx. 1400 rpm Fodpoglarljfx Afnopc motor power: 0,37 kW Mains connection: 380 Volt, 50 Hz - Riveting pressure adjustment infinitely variable via hydraulic pressure - Micrometer stop for stroke limitation - stroke movement via oil hydraulics (max. 45 bar) - machined flange surface Ø 115 mm with fixing nut on housing total length: approx. 800 mm weight: approx. 40 kg good condition The rivet head has a multi spindle head to set 2 or 3 rivets at the same time. This can be dismantled and used normally. For normal use the normal wobble head which holds the tool is missing.

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. This riveting machine can be used for movable and immovable riveted connections. Fodsfvztujpfx Afnspc Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg.

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M20L/6436, Offer Number: M20L/6436 Machinetype: rivet header Make: Carlo Salvi Type: RF/SV Constr. year: 1974 diameter range: 0,8-3,0 mm cutting length: 30 mm shaft length under head: 25 mm Fedpfx Aoxlr E Tefnepc output - pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M20I/9016, Offer Number: M20I/9016 Machinetype: rivet header Make: Carlo Salvi Type: RF/550/SV Constr. year: 1992 Fpodpewzknbofx Afnec diameter range: 2-5,5 mm shaft length under head: 45 mm max. outside dia. Alu: 6 mm output pieces/min: 450 cutting length: 64 mm Location: Germany

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M20I/9028, Offer Number: M20I/9028 Machinetype: rivet header Make: Carlo Salvi Type: RF/GL Constr. year: 1972 diameter range: 5-8 mm shaft length under head: 60 mm max. cut-off length: 90 mm output pieces/min: 200 Fpodpfx Afswzkydjnjc Location: Germany

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/8324, Offer Number: M20I/8324 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 Fpsdpfx Aswi Udcofnec diameter range: 2-6,35 mm shaft length under head: 70(65) mm cutting length: 87 mm output pieces/min: 360(320) Location: Germany

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/9019, Offer Number: M20I/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: Germany Fedpfx Aewzknuefnjpc

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Fpedpfxswi Sbre Afnec Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: excellent (used), functionality: fully functional, machine/vehicle number: P90-6924, OSCILLATING RIVETING MACHINE, BENCH MODEL TYPE DNX 05 Condition: very good, fully operational Price: €5,000.00 ex works Fjdpfx Aoxlg Atofnspc

Condition: used, STE 2-620-006-24B4-00 Single, FeedingUnit, TOX Fjdpfx Aoq S Umnefnspc Model: STE 2-620-006-24B4-00 Single Type: FeedingUnit Condition: Used

Condition: used, PB300, EBZ riveting pliers trolley Model: PB300 Type: TE-H 055.080.270.000 Condition: Used Fsdpfx Ajq S Umkofnjpc

Condition: used, functionality: fully functional, Year of construction: 2017, Type: AUTOMATIC RIVETING MACHINE Manufacturer: SICoM srl., Italy Model: MP1R-E Year: 2017 Fpodpoxgpgkjfx Afnec Automatic riveting machine, electric motor for rivets. The welded steel frame allows the setting of stainless steel rivets. The feeder, easily interchangeable allows to set every kind of rivets. All the functions are under the control of a microprocessor, a partial counter with reset and a total counter are available. Among the options a slow motion for TEST and a MULTIPLE SETTING to repeat a programmable sequence of a certain number of eyelets and the time between the setting. Techinical Features (please find broshure attached). Instruction and maintenance manual available on request. Throat depth 160mm Measures 450x500x1400mm Working cycle 0.35” Power supply 220V monof / single ph 400W Weight 70 kg

Condition: used, Year of construction: 1988, Type: Riveting machine Manufacturer: ARNO Maskiner AB, Sweden Model: 1304 Fpsdpfjxgpftox Afnoc Year: 1988 Condition: fully working

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: Fjdpjw T U Ubefx Afnjpc L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Year of construction: 1999, condition: good (used), functionality: fully functional, Manufacturer: Vester Elektronik GmbH Model: Sensorchek VSC 10C Year of manufacture: 1999 Machine type: Optical measuring and sorting machine Application: 100% inspection of turned parts, stamped parts, rivets, screws, small components Technology: Optoelectronic image processing with CCD/CMOS cameras Technical Data Measuring System • 1–4 industrial cameras (CCD/CMOS) • Telecentric precision lenses • Transmitted and incident light illumination (LED flash) • Subpixel evaluation • Measuring accuracy: in the hundredth range (approx. 0.01 mm) Fodpfx Afjyizrlenspc Testable Parts • Diameter: up to approx. 30 mm • Length: up to approx. 80 mm • Material: Metal parts, turned parts, stamped parts, pressed parts Performance • Cycle rate: 100–250 parts/min • Feeding: Vibratory bowl feeder + separation • Sorting: Pneumatic good/reject ejection

Condition: used, Orbital Riveting Machine Double Riveting Automatic with Rotary Indexing Table DUNKES Type DN 4 Rotary table with SIEMENS control system Machine no. P 81 - 5458 Year of manufacture: 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Riveting spindle speed approx. 1,400 rpm Tool-to-anvil installation height max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, indexing step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the indexing table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke motion - Riveting unit adjustment via gear motor with leadscrew, positioning via adjustable micro switch Fededzp T Nepfx Afnepc - Modernization of the control system and retrofit with servo drive for the rotary table in 2009 - New electrical control cabinet with Siemens Simatic panel – built in 2009 - Riveting time infinitely programmable - Riveting pressure infinitely adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0–60 mm Space required L x W x H 3200 x 1250 x 2400 mm Weight approx. 2,500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivet pins. The opposing riveting unit simultaneously rivets the pin from both sides. The controlled table automatically rotates to the next working position after each cycle. Ideal for saw blade manufacturers and repair shops. Alternatively suitable as a basis for constructing a special-purpose machine.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, overall weight: 130 kg, total length: 1,200 mm, total width: 780 mm, total height: 1,280 mm, Equipment: foot remote control, TECHNICAL DETAILS Fpjdpfx Asyf A S Eofnoc Grommet size: 4 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 780 x 1,280 mm Net weight: 130 kg EQUIPMENT on castors with foot switch Note: The machine is sold without a riveting head.

Condition: excellent (used), Year of construction: 2020, color: other, Internal dimensions: 7,300 x 2,472 x 2,550 The aluminum swap body T.SWAU BK, which is on average 750 kg lighter than usual products on the market and therefore enables a larger loading capacity, Talson's innovative self-supporting box construction is manufactured in a special aluminum sandwich design. In addition, modular aluminum side walls are made of 6 separate plates riveted with aluminum omega profiles, which enables cost-effective and quick repairs if necessary. Aluminum has good UV resistance (non-yellowing) and aging resistance and is easy to clean due to its low dirt adhesion. Talson T.SWAU BK is equipped with a robust aluminum Talfix load securing system with multiple holes to enable different wagon loading models in one box. As part of the patented Talfix load securing system, the double deck bar with 1 daN capacity each allows the creation of a second level in the vehicle for maximum load capacity. Talfix® is suitable for double deck applications that allow multi-level loading with 700 kg capacity per 1 m. = More information = Year of manufacture: Jan 2020 GVW: 16.000 kg Dimensions (LxBxH): 7450 x 2530 x 2750 cm Technical condition: very good Visual appearance: very good Registration number: 1078 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Fjdpfx Afjuxvbaonopc Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, tank capacity: 50,000 l, GENERAL Design: upright Remarks: exact dimensions may vary slightly; the riveted insulation is damaged in some areas (see images); the base of the tank is filled with concrete External diameter: 3,100 mm Total height: 9,000 mm Insulation: present Location: outdoor storage Volume: 50,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: vapor condensate tank (dairy) INSULATION Insulation jacket: riveted EQUIPMENT Manhole / dome: in the cylinder Note: slight residues Fpedpfxoyckpts Afnoc

Condition: used, tank capacity: 1,250 l, GENERAL INFORMATION Equipment: Spray head Design: upright Remarks: Minor differences in the design of the two tanks; dents in the insulation shell of the lower bottom; one tank also has a dent in the insulation shell in the cylindrical area (the spray head is also missing from this tank) External diameter: 1,350 mm Internal diameter: 1,240 mm Total height: 1,750 mm Insulation: present Location: Bremen Volume: 1,250 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,000 mm Last use: CIP tanks in the pharmaceutical industry Fpodpfxjyci Ibs Afnjc TANK Support type: Height-adjustable feet Number of feet: 3 units INSULATION Insulation shell: riveted Insulation shell material: stainless steel EQUIPMENT Manway/Dome: in top head (DN 400) Outlet: DN50 DIN 11851 Remark: minor residues MATERIAL SPECIFICATION Feet material: stainless steel

Year of construction: 2018, condition: ready for operation (used), Various metalworking machines are available as remaining stock. 1/2/3) Three wobble riveting presses Thielicke GmbH & Co. KG WN6, year of manufacture: 1998. 4) Schlenker & Cie Atlas W4 high-speed planer, year of manufacture: 1961, weight: approx. 1700kg. 5) Spot welding machine J.u.W. Müller GmbH Opladen OMP67F, year of construction: 1960. 6) Ring welding machine Ing. G. Wenninger/BAPO KH III, year of construction: 1940s, conversion: 1964. 7) Cross-cut saw Berg & Schmid Mini Compact, year of construction: 2018. 8/9/10) Three presses. Including vices and lathe accessories. On-site inspection is possible. Individual sale possible. Fsdeu Tuvcepfx Afnspc