Used Rivet Gun for sale (1,501)

Condition: used, Cordless riveting tool, blind rivet gun, blind rivets Gusdpfx Alsdz Ul Ij Uoh -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Condition: not inspected (used), Blind rivet setting machine Blind rivet gun Manufacturer: Gesipa Type: GAV 7000 Machine no. 5208121 Year of manufacture: 2001 Weight: approx. 90 kg. Gjdpfoz Alqwex Al Ueuh

Year of construction: 1999, condition: used, hydraulic lockbolt rivet gun, rivet gun, blind rivet gun Gedjdlw Dtepfx Al Ujuh -hydraulic lockbolt rivet gun -without: storage container -incl.: hydraulic unit and control -Dimensions: 1230/800/H1300 mm -Weight: 450 kg

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. Godpjz R Sulsfx Al Uouh I would assist with the dismantling; a forklift is available.

Year of construction: 2021, condition: like new (used), For sale: ANEST IWATA brand professional spray gun washing machine, models IWK SOL-B and IWK SOL-C (Model SLB/SLC), in perfect working condition. This equipment is designed for automatic and manual cleaning of spray guns and small components, using thinner, water, or water-based detergents. It is the ideal solution for paint shops, automotive repair shops, metalworking shops, or any industry that requires quick, safe, and efficient cleaning of spraying equipment. It includes complete technical documentation and CE certification. Key technical specifications: - Brand: ANEST IWATA (ANEST IWATA Europe S.r.l.) - Model: IWK SOL-B / IWK SOL-C (Model SLB / SLC) - Function: Automatic/manual washing of spray guns and containers up to 5 L. - Washing products: Thinner, clean water, or water-based detergents (pH 6.5 - 12). - Tank capacity: 25 liters per container (2 containers: clean and dirty). - Weight: 42 kg - Dimensions: 1100 mm (height) x 450 mm (width) x 660 mm (depth). - Maximum operating pressure: 10 bar. - Operating pressure: 6 - 10 bar (recommended: 8 bar). - Air consumption: 15.7 Nm³/h (at 8 bar). - Sound level: 77.7 dB (A) - Equivalent average level. - Certification: CE marking, CE declaration of conformity. - ATEX compliance: Group II, Category 2 G (Zone 1), suitable for potentially explosive atmospheres. - Applicable standards: Directive 98/37/EC (Machinery Safety), Directive 94/9/EC (ATEX), EN 12921-1/2/3, EN 13463-1, among others. Features and advantages: - Efficient washing system: Includes a pneumatic membrane pump for clean and dirty detergents, a programmable timer, and vapor extraction nozzles. - Integrated safety: Safety valve that locks the pump when the door is opened, preventing splashing. External grounding to prevent electrostatic charges. - Easy maintenance: Robust design in stainless steel and galvanized steel. Accessible air and detergent inlet filters. - Versatility: Compatible with suction-feed and gravity-feed guns, with cup mounted or detached. - Model IWK SOL-C: Includes an automatic final wash function activated by a control button. Condition and maintenance: - Condition: New (never used) Gedpfx Aloz Rivxe Ueuh - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter cleaning, lubrication of the pneumatic system, pump inspection). Includes: Original documentation (User and Maintenance Manual, CE Declaration of Conformity).

Condition: used, Year of construction: 2015, max. rivet shank diameter: 1–6 mm (steel/solid material 37 kp/mm²) max. riveting force: 6.5 kN at 6 bar Variable spindle stroke from 5–30 mm Riveting operation triggered by foot pedal Clamping surface: 240 x 247 mm Weight approx. 100 kg In very good condition, available immediately!!! Machine manuals are available Gujdjz Ikn Aopfx Al Uoh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Gusdpfx Aey Nzhbel Ujh Furthermore, there are other similar machines. Currently physically located at the subsidiary plant.

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm Guodpfx Ajx Edtcsl Ueh output pieces/min: 360 Location: In our warehouse

Year of construction: 1974, condition: good (used), Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, orbital riveting machine type HN1 -Shaft diameter: 12 mm -Motor: 0.37 kW 1390 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg Gedpfxjz Ixx Aj Al Usuh

Condition: excellent (used), functionality: fully functional, Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm Godpfjwdwv Rox Al Ueuh - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/9019, Offer Number: M20I/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: Germany Guodpfjwzknuox Al Ujh

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: 8 bar 24 V 80 kN 3 K 150 E Gusdpswrp Iusfx Al Ueh The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M20I/9028, Offer Number: M20I/9028 Machinetype: rivet header Make: Carlo Salvi Type: RF/GL Constr. year: 1972 diameter range: 5-8 mm shaft length under head: 60 mm max. cut-off length: 90 mm output pieces/min: 200 Gedjwzkydepfx Al Ueuh Location: Germany

Condition: good (used), functionality: fully functional, For sale is a used nailing machine from the manufacturer Bohm & Kruse, designed for the production and assembly of wooden crates. The machine is specifically designed for nailing crate parts and also features a riveting device. For safety reasons, the machine is enclosed and equipped with a two-hand control. Technical data / equipment: Manufacturer: Bohm & Kruse Machine type: Crate nailing machine / Nailing machine For nailing crate parts Riveting device available Multi-nailing head Workpiece support / workbench Adjustable workpiece stops Safety enclosure with protective grille included Two-hand control Emergency stop Gujdozym Nispfx Al Ujh Robust industrial design The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available in the short term! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Year of construction: 2016, condition: used, functionality: fully functional, Radial riveting machine KARDEŞLER Guedpjywygxsfx Al Ush

Condition: excellent (used), TBT T30 SERIES TABLE TYPE GUN DRILLING MACHINE Model T30-1000KTN Serial number 410.364.016 Year of manufacture, approx. 1980 Number of spindles 1 Drilling range in steel 4 - 30 mm (solid) Counter boring 40 mm Nominal drilling depth 1000 mm Slotted table size 850 long x 750 wide mm Table size overall 1100 long x 1000 wide mm Table cross movement 800 mm (approx.) Guodpfxszuxp Rj Al Ush Table vertical movement 400 mm (approx.) Drilling slide longitudinal travel 1450 mm Slideway width 250 mm Spindle speeds to approx. 9000 rpm Spindle motor 25 kW Total load 41 kW Supplied with: 2 off Whip guides. Ballscrew feed. 2 Axis DRO to table Cross and Vertical, DRO to drill slide. TS25-1000 Coolant tank. Drill bushes. For Sale with Jet Machinery Ltd Jet Machinery Stock No: #27033 Machine Serial Number: 410 364 016 Cost: £17,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2019, condition: used, functionality: fully functional, AGME radial riveting machine Guedpeywx Iusfx Al Uoh

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Gedpfjw Uab Aox Al Uouh Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Godsw T U Ubopfx Al Uouh Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, Year of construction: 1995, Technical details: throat: 1000 mm air pressure: 6,0 bar total power requirement: 5,0 kW weight of the machine ca.: 0,4 t dimensions electric cabinet LxWxH: 1,03 x 0,4 x 2,05 m dimension machine xH: 2,6 x 1,0 x 2,3 m AUTOMATIC DRILLING AND RIVETING MACHINE Application: automatic drilling and riveting of sheet metal parts. Features: - Rivet Ø 3.2 - 4.0mm, rivet length 6.0 - 10.0mm; riveting force = 40,000N. - Drilling: Speed up to 5,000 rpm, drilling feed 50 - 1,500 mm/min, stroke height 80mm. - Clamping: clamping force 50 - 400 daN, lower tool 75mm adjustable - Hydraulics: pressure 128 bar, supply 14 l/min, power 4 kW - Pneumatic: pressure 6 bar, supply 9,5 l/sec. - Operation via control panel or/and foot switch. Equipment: - side table - 8 oscillating conveying heads - hydraulic power unit accessories: Gusdpeu Ictnjfx Al Ush - Tool cabinet, div. drill countersink, 2 closing heads, hold-down and other div. tools comparable in photo. *

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Guodpewi Sbrsfx Al Ujh Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse

Condition: excellent (used), Here, we offer you a TOX full-punch riveting system. TOX full-punch riveting system, type TZ-VSN. The full-punch rivet first severs all joining partners and then punches the rivet button out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, expands its range of products and services with a forward-looking process. Full-punch riveting provides an additional mechanical sheet metal connection, which is of great importance for lightweight constructions and the joining of hybrid parts and assemblies. The rivet feeders, clamp and tool holders are also designed to be universal, so that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand clamps and TOX robot clamps. Type TZ-VSN Press force 55 kN Total stroke 140 mm Rivet type: diameter 5x4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Type: TZ-VSN Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) Gsdpfxozdtffj Al Ujuh We would be happy to answer any further questions you may have by telephone. Written orders can be placed by email or fax.

Condition: excellent (used), Tucker Nimak MF180: Robotic welding tongs for single-sided resistance spot welding The robotic welding tongs for single-sided resistance spot welding from NIMAK utilize state-of-the-art medium-frequency transformers, a control system with adaptive welding current regulation, and finely adjustable welding cylinders for gentle power. Here, the right amount of force is crucial to reliably join materials without deforming them or leaving marks on the visible side. Our systems master this task perfectly. Tucker Stanley Punch Riveting Tool, C-Frame With the Tucker® SPR equipment, you can join materials that cannot be easily welded, including aluminum-aluminum, aluminum-steel, and high-strength steel, by combining two technologies in a modular system: punch riveting with semi-hollow rivets and solid punch rivets. AEG SVS Welding Technology Electrode Grinding Device EF310-01E-S-D-Fix Grinding of spot welding electrodes Automatic rivet feed With controller: The brain of every SPR system. It manages, thinks, remembers, and communicates in an Industry 4.0 environment. The lung – small, quiet, and fast rivet feed for your SPR tool. Gsdpfxjzgcm Rs Al Ueuh Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Gusdjrtrztspfx Al Uoh Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Year of construction: 2000, functionality: fully functional, Hydraulic riveting machine for installing self-tapping rivets, Sovereign SO14960 Length of rivets that can be installed: 10-18 mm Automatic feed system with a vibrating feeder Pressing force: approximately 1500 kg Cycle time for installing a single rivet: 2.5 seconds Guodpfxez Hv Sqs Al Uoh