⭐Powder oven + powder booth + gun⭐

Proton MINIPBMAT-1-S

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. Cedpfx Ajtmqi Djcperh The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. Credpfx Acjulwg Nopoh System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Cedpfx Acotk Rwtjperh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 181199, Machine no.: 181199 Manufacturer: AGTOS Crodpsrq Hmzjfx Acpjh Type: Barrel blasting machine Designation: TS 150-3.6-01-15,0 Turbines: 1 turbine with 15.0 kW Extraction air volume: 3000 m³/h Max. batch weight: approx. 1000 kg Type: Sinter-plate filter Other details Characteristics of the installed filter system Residual dust content: ≤ 1 mg/Nm³ Characteristics of the blasting system Blasting media (material and size): Wire grain Blasting media quantity (initial filling): approx. 1000 kg Workpiece temperature: max. 80°C Drum length: 900 mm Drum diameter: 800 mm Max. Drum load: 250 kg Max. Single piece weight: 5 kg Capacity: 150 liters Max. Feeder lifting capacity: 480 kg Sound pressure level without sound insulation: ≤ 85 dB(A)

Year of construction: 2000, condition: good (used), used drum shot blast machine Brand: OMSG Type: ROTOFLOW Model: 170-N Year 2000 Registration: 10371/00 Continuous belt shot blasting machine for sandblasting/shot blasting aluminum injection, brass or steel forgings, screws and bolts. Automatic feeding tower. Max unit weight of the piece: 8kg Turbines: 2 x 11kw Turbine diameter: 350mm inverter turbines Special two position valves Crjdpfx Acemza S Espoh Filter CURRENT STATUS: Disassembled and stored in our facilities.

Condition: good (used), Year of construction: 2001, total width: 700 mm, total length: 1,050 mm, total height: 1,400 mm, disc diameter: 250 mm, overall weight: 100 kg, Double brush polishing machine, with 2 exhauster stands, Motor 2-speed, 1,3 / 1,7 KW, speed 1400/2800 rpm., Dia brushes 250 x 25 x 60 mm, dimension 1050x700x1400 mm, weight 100 kg Csdpjwhzh Esfx Acperh

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Cjdotq Twvopfx Acpsrh Since the contact wheels are directly driven, this system could also be used for polishing or brushing. If desired, this system can also be offered completely overhauled.

Year of construction: 2021, condition: used, We are selling our chemical nickel work tank. The tank is made of acid-resistant stainless steel and electropolished on the inside. Sager and Mack pump and filter. Munk Protektostat Frequency converter for pump Heater with control and timer. From 10-93°C, approximately 1 hour 30 minutes. The internal dimensions are: L1200 x W600 x H950. The fill height is 880 mm, which corresponds to a volume of approximately 635 liters. Crjdpfx Aceqzgb Sspjh Installation dimensions: L2100 x W900 Total connected load approximately 50A If required, we can also create a customized solution for you.

Condition: used, EQUIPMENT 1°) Model CD 200 – PN Vibratory deburr * with sound deadening lid. * parts separation Credpfeug U Eqjx Acpjh * work bowel volume : 200 [L] * diameter : 1085 [mm] - weight : 475 [kg] - overall dimensions : 1.560 x 1.350 [m] 2°) Model BFHL 350 / 3300 Hot air belt dryer * weight : 1200 [kg] - overall dimensions : 2.470 x 1.03 [m] 3°) Model SDT 1500 Rotary table * table dia : 1500 [mm] * max load over table : 25 [kg] - weight : 100 [kg] 4°) Model ZM03-FL Centrifugal filter * recycling process water - weight : 250 [kg]

Year of construction: 2026, operating hours: 10 h, condition: like new (used), Machine is suitable for foundries, or standard work. Machine height : ~5.250 mm Machine width : ~3.300 mm Crjdpfx Aelqxn Rocpsh Machine length : ~2.500 mm Maximum work volume : 0.150 m3 (150 litres) Maximum load weight : 300 kg Maximum piece weight : 15 kg Blast compartment diameter : ~750 mm Blast compartment length : ~850 mm Number of blast wheels : 1 x 11kW E-Eco Frequency inverter for turbine : 1 pcs Magnetic cleaner : 1pc Blasting time : Adjustable PLC : Siemens S7 1200 + touch panel7'' Modem : 1 pc Safety fance with fotocell : Yes Automatic abrasive filling : Da Filter : Integrated in the machine Total installed power : ~17 kW Machine working hours : 10h The machine is on stock. A test of the machine in our premises is possible with prior notice