Used Rod Pump for sale (12,035)

Condition: excellent (used), For sale is a Pumpen Distel type 50/200 centrifugal pump equipped with an 11 kW electric motor from Antriebstechnik G. Bauknecht AG. The pump is used and in working order. Visually, it is in good used condition and has normal signs of use and storage. The actual condition and completeness are shown in the photos. Technical data of the pump: Manufacturer: Pumpen Distel Type: 50/200 Serial No.: 78756 Flow rate Q: 40 m³/h Pressure: 4.5 bar Rotational speed: 2900 rpm Power: 11 kW Connections: flanged Technical data of the electric motor: Dodpfez Sn Sbsx Aarewd Manufacturer: Antriebstechnik G. Bauknecht AG Type: RF 11/2-75 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2930 rpm cos φ: 0.88 Protection class: IP54 Insulation class: B Operating mode: S1 Mounting form: B3/B5 Condition: Used, in working order. Has normal signs of use and storage. Scope of sale: Complete centrifugal pump with an 11 kW electric motor – exactly as shown in the photos.

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Industrial design Manufactured in: Western Germany Motor specifications: Dodpfx Aoz Spapoarswd Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Current: 29 A Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Condition: used, Year of construction: 2020, This is a Product Pump with the Balance tank for viscous products ie. yoghurt, pastes, cream, etc. It is designed to transfer the product from A To B without overheating or beating the product. This is located on skid with an extra high speed volume pump for the CIP wash down of the system. Control panel is included in the line. Product Pump: For viscous Products CIP: Special CIP Pump on the skid Stainless steel: Yes Electricals: 3 phase / 400v /50-60hz Available: Immediately Dwjdpfx Aez Izh Tjarsd

Condition: used, type pump : Waukesha 320 U2 all stainless steel pump housing 2 gears all stainless steel dimensions (l x w x h) : ± 1.700 x 600 x 900 mm loading height ± 600 mm discharge height: ± 600 mm inlet and outlet DN 150 Djdps Ahg U Ijfx Aarowd 3 x 400V 50 Hz 11kW, 1500 / 123 rpm

Condition: used, NMNE 40 872 317 NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Inlet DN50 (± 400mm) Outlet connection DN 30 (± 400mm) Dodez Rnzajpfx Aarewd Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Dsdpfx Aasz Ru Ersrowd Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Machine: CSF Product feeding pump Dwodpfx Aao Ahlimersd

Condition: new, functionality: fully functional, Industrial centrifugal pump by Cornell, model 10NHPP-2, specifically designed for transporting delicate food products (e.g., potatoes, vegetables, or fruits) in a water-shielded environment. The 'Hydro-Transport' construction minimizes the risk of product damage during conveyance thanks to a specially contoured impeller. The device is in a horizontal execution, mounted on a base for easy integration into processing lines. The unit features a VisserNederland service nameplate, facilitating spare parts identification and technical maintenance scheduling. The pump is characterized by a large inlet and outlet diameter, allowing handling of sizeable products. Dedpfxoy I Dlaj Aarswd

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Dwodpfoz Di Nwsx Aarjd Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Year of construction: 2015, condition: used, Automatic Filling, Capping & Shrink Sleeve Labelling Line – 2015 Manufacturers: SVENSKA PUMP / CLEVER MACHINES / CAPSSON AB Year: 2015 Condition: Used Dwjdpj Ahi Iqjfx Aarsd Location: Denmark Complete automatic filling and packaging line, previously used in the dairy and food industry. The line includes: SVENSKA PUMP automatic inline filling machine with 2 filling nozzles, stainless steel construction, and Siemens SIMATIC HMI. CAPSSON AB automatic capping machine, Type 1, S/N 15001, year 2015, with Allen-Bradley control panel. CLEVER MACHINES GS201 automatic shrink sleeve labelling machine, year 2015. Heat shrink tunnel for sleeve labels. Markem-Imaje SmartDate X60 coding printer. Stainless steel conveyors, motors, sensors, and control equipment. Technical details: Electrical supply: 400 V / 50 Hz (Clever Machines) Previous packaging format: 250 g containers Other formats may be possible, subject to modifications. Original technical documentation available. The equipment is offered as a complete line, in its existing condition. Sale condition: Used, as is, where is, without warranty. Delivery: EXW Denmark. Inspection by appointment.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Dwsdpfx Aasyi H Eqjred Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: excellent (used), For sale: a used Speck-Pumpen centrifugal pump, type 50/125, equipped with a three-phase Bauknecht electric motor, 4.0 kW. Pump specifications: Manufacturer: Speck-Pumpen Type: 50/125 Part No.: 69807 Manufactured in: West Germany Motor specifications: Dsdpfez Snuzjx Aarewd Manufacturer: Bauknecht Type: RF 4/2-76 No.: 3230192-2 Power: 4.0 kW Voltage: 380 V Current: 8.1 A Rotational speed: 2900 rpm Frequency: 50 Hz cos φ: 0.89 Protection class: IP44 Insulation class: B The pump has been inspected and is fully functional, ready for use.

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Dwjdpfxoz A Avho Aarjd Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: used, PPM Rotary Lobe Pump Model LH84L - 4981 PU Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Djdpfxoz E Iawj Aarjwd Port size - 90mm flange

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Rotary lobe pump JEC Type ZF -120-021 Dwodpfxjh Inqis Aarod From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Complete Stainless Steel

Condition: good (used), Promoted by APEXPUMPS Bristol UK -type: HPV32.2-7-30-CDAAKR Dwodpfst A U H Ijx Aared -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Dsdpfx Aasy R Ecrsrjwd Year 2021 Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Dwjdpfsz E Nhvex Aarod Power isolator switch 1.5 kw 5.7 m3/hr H max 60m

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump Dwodpjyzfh Aefx Aared -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Dwsdpfjzmt U Esx Aarsd

Condition: used, Year of construction: 2015, functionality: fully functional, KNOLL Chip Removal Central System with Pump Technology 25,000 Liters Systems with Pump Technology A conveying and filtering system with pump technology is suitable for the fully automatic transport of chips from several machining centers to a central filtration unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the options to freely arrange and rearrange their machine park. The maintenance and care effort is low. Areas of Application The closed-loop system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an isolated solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park • Low space requirement due to above-ground pipelines • No system components within the floor of the hall • Low maintenance and care effort Main Components • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return line piping • Chip pre-separator (optional) Dwsdpfx Aasz D Uz Serjd • Dirty and/or clean tank • Coolant filter system (e.g., band filter or backwash filter) • Supply pump(s) • Supply line piping • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)

Condition: used, Year of construction: 2014, functionality: fully functional, KNOLL Central system with pump technology The system was used for cooling magnesium machining processes. Systems with pump technology A conveying and filtering system with pump technology is suitable for the fully automatic chip transport from several machining centers to a central filter unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the possibilities to freely arrange and rearrange their machine park. The maintenance and servicing effort is low. Applications The circulation system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an independent solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park Dwsdoz D U Edepfx Aarod • Low space requirement due to overhead pipework • No system components within the floor of the hall • Low maintenance and servicing effort Main components • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return pipework • Preliminary chip separator (optional) • Dirty and/or clean tank • Coolant filter system (e.g. belt filter or backwash filter) • Supply pump(s) • Supply pipework • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 95 kW (129.16 HP), type of input current: three-phase, type of cooling: water, overall weight: 729 kg, input voltage: 400 V, total width: 920 mm, total length: 2,430 mm, total height: 1,060 mm, warranty duration: 6 months, heating capacity: 130 kW (176.75 HP), WATERCOOLED CHILLER/HEAT PUMP DAIKIN EWHQ120G 95/130 kW Cooling capacity: 95 kW - 27 ton (12/7°C — 35°C) Heating capacity: 130 kW - 36.9 ton (40/45°C - 7°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Options: Heat pump Type of refrigerant: R410A Compressors: 2 pcs. Copeland(scroll) Dimensions: 2,432 х 0,928 х 1,066 m. Weight: 729 kg. Working hours: 11437 / 4712 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Dwsdjy U U Tuepfx Aarod Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, For sale: a used submersible pump with a capacity of 160 m³/h, powered by a 7.5 kW motor and operating on 380 V. The pump has been inspected and is in full working order. Condition/defect: a crack in the outer part of the housing casting. The pump has been fully tested and confirmed to be working; this defect does not affect its operation. Dsdps Aibrijfx Aarowd

Condition: new, Submersible slurry pump for drainage. Dodszcn Utepfx Aarjwd