Used Rolling Frame for sale (14,018)

Condition: used, Year of construction: 1978, Wilhelm Schaefer KG Model SRMVQ Heavy Duty Plate Rolling Machine With Roller Conveyor Supports Iodexvx N Hjpfx Ad Djbd Capacity 3,000mm Wide. Top Roll Ø530mm. Weight 65 Ton. Machine Number 4284

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Ijdsxqyxlepfx Ad Debd Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: used, functionality: unexamined, Year of construction: 2001, Bending machine ZOPF - model ZB 80/3 H - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller Iedpfsxu Ikwjx Ad Djbd - working position horizontal and vertical - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 50 mm - roller diameter: 192 mm - shaft rpm: 7,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 0,75 kW - hydraulic pressure: 10 to - adjusting way: 120 mm - weight: 680 kg - dimensions: 900x800x1300 mm

Condition: good (used), Year of construction: 2021, 1 used motorized plate bending roll Manufacturer: Akyapak Model: ASM 140-12/5 Year of manufacture: 2021 Technical specifications Sheet width: 1250 mm Sheet thickness: 5.5 mm Pre-bending: 5.0 mm Roll length: 1280 mm Minimum diameter: 210 mm Top roll diameter: 140 mm Weight: 1365 kg Dimensions (LxWxH): 2,020 x 900 x 1,200 mm Standard equipment: – Central rolls driven by electric motor, planetary gearbox, and gear drive – Side-opening top roll – Main motor with brake system – Cone bending device Iodpfx Adoxnpwxe Debd – Mobile control panel and foot pedal – CE mark / Declaration of Conformity

Condition: good (used), Year of construction: 1992, The bender is set up for aluminum, chromatech and plastic frames. Ibsdsqhugfepfx Ad Djd

Condition: new, Year of construction: 2024, functionality: fully functional, Pneumatic horizontal and vertical bed frame presses Standard solution suitable for frames 800-1000x1600-2000 mm. Ibedpfxjutbavs Ad Ded

Condition: used, Year of construction: 2011, Profiling machine in good condition Specification Model: Schlebach Quadro LT Made in: Germany Ibodpfx Adew E H Das Ded Product width: 540 mm Cutting: circular shears Weight: 910 kg If you have any further questions, we will be happy to answer them.

Condition: repair required (used), functionality: not functional, Year of construction: 1977, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 435 mm, side roll diameter: 435 mm, roller diameter: 435 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 35,000 kg, total length: 8,000 mm, total width: 2,500 mm, total height: 2,720 mm, power: 40 kW (54.38 HP), input voltage: 380 V, Equipment: centralized greasing system, emergency stop, swiveling upper roller, 3roll plate bending machine 2500x40 mm Sertom -Italy Rollers length 2550 mm -Top roll 435 mm -Side rolls 435 mm Ijdpfoxqq Iqox Ad Djbd Capacity rolling -plate width 2500 mm -plate thickness 40 mm -pre-bend 35 mm We sell as is Machine need hydraulic repair DIMENSION 8000X2500XH2720 MM WEIGHT 35 ton POWER INSTALLED 50 Hp

Condition: good (used), Mounting frame for window glazing Omega 100 – made to order, atypical. Must be seen or call for technical specification. Iedpfx Adoxu U N He Debd

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment. Especially designed for staircase construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drilling are easily achievable thanks to the swivelling drilling unit. - Motor with pole changing, two speeds - Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm - Motor start via convenient handle switch - Equipped with Röhm two-jaw chuck 1–20 mm - Linear laser for precise workpiece positioning - Drilling unit can swivel 65° left and right - Pneumatic adjustment of machining height; dowelling possible on two levels without resetting - Desired drilling heights can be set for each level via a digital counter; switching is then pneumatic from the front - Cross movement 340 mm, stepless or in 12 mm increments with indexing rail - Pneumatic clamping possible at any position, controllable from the front - Maximum height adjustment approx. 100 mm above table height - Drilling stroke approx. 200 mm - 2 pneumatic workpiece clamps, 1 clamp column repositionable to the front Ibodoxmatnjpfx Ad Djd - 2 swivelling workpiece supports - Suction funnel - Center stop + 1 side stop - Fixed mitre stop - Length stop as round bar - Set of drill bits - Operating manual - CE mark - Machine was partially repainted due to existing paint splashes - Pneumatic hoses replaced Dimensions approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "other offers from this provider."

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Ibjdsxnqw Tspfx Ad Ded Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, functionality: fully functional, Type: 3-roll plate rolling machine Maximum rolling length: 1500 mm Estimated rolling thickness (S235) over the entire length: 5 mm Exact value not known as the nameplate is missing Top roll diameter: 125 mm Lower roll diameter: 110 mm Isdexrv S Dopfx Ad Dsbd Lower rolls: driven Drive: electric Side: Foldable side for removal of closed cylinders. Machine dimensions: length 2200 mm x width 850 mm x height 1250 mm Weight approx. 1100 kg Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract and we advise you to check all relevant details. Financial Information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses).

Condition: used, functionality: fully functional, Year of construction: 2004, For sale: CNC Rolling Machine FARMAR (Famar S.N.C.) Condition: Used, in good technical working order, ready for operation. Reliable, robust construction from Italian manufacturer Famar S.N.C. The rolling machine is designed for bending and forming sheet metal and plates. Capable of rolling both round and oval workpieces. The roller covers are damaged; it is recommended to replace the coating. Technical specifications: Year: 2004 Working length: 1300 mm Maximum pre-bending thickness: 0.5 mm Maximum rolling thickness (Kr = 40 kg/mm²): 1 mm Iodpfoxlif Dox Ad Dobd Central roller diameter: 80–90 mm Side roller diameter: 90 mm Total machine length: 2150 mm Machine width: 1000 mm Machine height: 1100 mm Working table height: 1000 mm Hydraulic system motor power: 1.5 kW Working speed: 5.5 m/min Pre-bending speed: 2400 mm/min Power supply voltage: 380 V Frequency: 50 Hz Weight: 1300 kg Application: The machine is designed for rolling, bending, and manufacturing cylindrical shapes from sheet metal. Suitable for steel, aluminium, and other materials up to 1 mm thickness. Ideally suited for small and medium-scale production where precise, repeatable rolling results are required. If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg Iedpfxoxw D Udj Ad Dsbd

Condition: excellent (used), Maweg Frame Press Working length 3000mm Ibedpfx Adjvy A Uxs Dod Working height 200mm Foot width 95mm Number of vertical clamps 5 Number of side clamps 3 Hydraulic pump motor 2.2kw

Year of construction: 2025, condition: new, Big Bag rack Cross beam for Big Bag for forklift/crane Isdpfxexnbk De Ad Debd Pneumatic discharge Aluminum container for material collection With sieve and suction connection with filter

Condition: new, Bernardo Frame Press HRP 3000 Robust and torsion-resistant hydraulic frame press with high-quality pressure cylinders. Whether it is used for furniture or door production, block or frame gluing, the high pressing force of 2,000 kg per cylinder and precise, angle-accurate pressing of large-sized components enable all tasks to be carried out effortlessly. Technical Specifications Working length: 2,400 mm Working height: 1,550 mm Cylinder stroke: 95 mm Pressing force: 2,000 kg Vertical hole pitch: 50 mm Iodpfx Adoxrnvbo Dsbd Horizontal hole pitch: 160 mm Overall length: 3,250 mm Overall height: 2,070 mm Frame depth: 925 mm Weight: approx. 315 kg Features • Versatile use, e.g. for frame, window, and door production • Robust frame press with solid steel construction • Centralized control of the hydraulic cylinders including pressure gauge • Efficient gluing thanks to hydraulic design • Pressure cylinders equipped with rocker plates as standard Scope of Delivery • 4 movable pressure beams, each with one vertical hydraulic cylinder and counter support • 1 movable pressure beam with two horizontal hydraulic cylinders • 1 movable, adjustable pressure yoke

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Ibsdpfxjw Uhrij Ad Dod Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ready for production!

Condition: ready for operation (used), total height: 2,110 mm, total width: 2,240 mm, total length: 900 mm, passage width: 1,500 mm, power: 2.2 kW (2.99 HP), empty load weight: 1,250 kg, load capacity: 125,000 kg, width of table: 420 mm movable cylinder electro hydraulic two speed: fast slow Ibjdpoxgv Nfefx Ad Dsd Max ram adjustment: 400 mm Drawningspeed: fast 9mm/sec - slow 2,5 mm/sec Returningspeed: 12 mm/sec Max distance between table - ram: 925 mm Courant needed: 380/400V

Condition: new, Year of construction: 2025, control type: NC control, degree of automation: automatic, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 180 mm, side roll diameter: 150 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT Steel construction main frames Hydraulic top roll opening head Ijdpfx Adsxw D Tmo Dobd Movable control panel Centrally driven rolls powered by motor Hydraulic up/down movement for rear and lower rolls Precision bending with braked main motor Cone bending and pre-bending system Lower and upper rolls driven by planetary gearbox Rear roll ball system for easy sheet movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital indicators (2 units) User manual OPTIONAL EQUIPMENT Top crane (elevator) for support in large diameter bending Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on journal ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll: 180 mm Side Roll: 150 mm Min. Bending Diameter: 270 / 900 mm Motor Power: 4 + 1.1 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4350 mm Width: 1100 mm Height: 1290 mm Weight: 3070 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, The frame press is in good condition, professionally and conscientiously maintained. 3 vertical, 2 horizontal pressure cylinders, including pressing unit for angled elements Pressing pressure is finely adjustable Press width: 3450 mm, height 2250 mm Length 4350 mm, height 3000 mm, depth 800 mm Ijdjxgn E Sjpfx Ad Dobd Further information available via email or phone. Private sale, therefore no exchange, no warranty, and no guarantee. Sale is conducted with exclusion of any form of liability. No shipping.

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 3100 x 320 Hydraulic side roll adjustment 3 digital displays Hydraulic drop-end Hardened rolls Cone bending device Separate control panel Roll length: 3100 mm Top roll diameter: 320 mm Side roll diameter: 240 mm Ibedpfx Adexrdxfs Ded Total motor power: 20 kW Weight: 13,050 kg Dimensions (mm): 5900 x 1850 x 2050 (L x W x H) Bending capacity: 16 mm at minimum inner diameter (5 x top roll) 12 mm at minimum inner diameter (1.5 x top roll) Pre-bending capacity: 12 mm at minimum inner diameter (5 x top roll) 10 mm at minimum inner diameter (1.5 x top roll) All bending capacities are calculated based on 250 N/mm² yield strength Material: (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.

Condition: ready for operation (used), SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg motor power 14 KW Ibodpfxjxv Si Ts Ad Dsd Condition is very good, ready for production

Condition: new, Ostas 4-Roller Plate Bending Machine 4R OHS 3100 x 275 Hydraulic Side Roller Adjustment 3 Digital Displays Hydraulic Drop-End Isdpjxrduyefx Ad Djbd Hardened Rolls Cone Bending Device Separate Control Panel Roll Length: 3100 mm Top Roll Diameter: 275 mm Side Roll Diameter: 220 mm Total Motor Power: 16.5 kW Weight: 10,300 kg Dimensions (mm): 5900 x 1750 x 1860 (L x W x H) Bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 10 mm at minimum inside diameter (5 x top roll) 8 mm at minimum inside diameter (1.5 x top roll) All bending capacities are calculated on the basis of 250 N/mm² yield strength material (ST 37 – ST 42 structural steel). The images shown are for illustrative purposes only.

Condition: new, Ostas 4-Roll Plate Bending Machine 4R OHS 2570 x 275 Hydraulic Side Roll Positioning 3 Digital Displays Hydraulic Drop-End Hardened Rolls Cone Bending Device Separate Control Console Roll Length: 2570 mm Top Roll Diameter: 275 mm Side Rolls Diameter: 220 mm Ibjdpfx Adjxrdn Ho Djd Total Motor Power: 16.5 kW Weight: 9500 kg Dimensions (mm): 5350 x 1750 x 1950 (L x W x H) Bending Performance Data 16 mm at minimum inside diameter (5 x top roll) 12 mm at minimum inside diameter (1.5 x top roll) Pre-bending Performance Data 12 mm at minimum inside diameter (5 x top roll) 10 mm at minimum inside diameter (1.5 x top roll) All bending capacities are based on 250 N/mm2 yield strength Material (ST 37 – ST 42 structural steel) The images shown are for illustration purposes only.