Used Rotating Arm Wrapper for sale (12,488)

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 697 h, load capacity: 6,000 kg, lifting height: 29,900 mm, fuel type: diesel, construction height: 3,100 mm, empty load weight: 21,800 kg, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Technical condition: New Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Codpfozb R Uysx Aktsri Battery voltage: 12V Rear work lights, front work lights, full cab, CE certificate, Image is for illustrative purposes only. Wheel chocks, TÜV preparation, 40 km/h, LED work lights on the telescopic arm, fixed part on the right side, car radio with USB and Bluetooth, external microphone, 100W LED spotlights around the machine, 5x vibration dampers for the telescopic boom, Active CRC.

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Codjwd Sh Ujpfx Aktori Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly. Csdpe Ah R Ddsfx Aktjri

Condition: good (used), Schon 8 LES hydraulic swing-arm clicker press Crodpfx Aksz S Uxhetsi The machine is in excellent condition and ready for operation. Ideally suited for die-cutting challenging materials; widely used in the leather goods and printing industries. Compatible with both leatherworking and bookbinding/printing dies. Capable of cutting paper, cardboard, leather, plastics, etc. Pressing force: 22 tons Power supply: 380V Table dimensions: 900 mm x 450 mm Head (striking plate) dimensions: 550 mm x 450 mm Maximum stroke: 150 mm Weight: 1200 kg Two-hand control or foot pedal operation. Equipped with an additional safety guard.

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. Codpfx Aksy D Uzqetjri This is an ex bakery machine, in good working condition Price € 5,900

Condition: new, mileage: 100 km, first registration: 10/2026, fuel type: diesel, tire condition: 100 %, axle configuration: 8x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2027, Equipment: crane, trailer coupling, = Additional options and accessories = - Power take-off (PTO) = Remarks = Crane Remote control: ✓ Rotator: ✓ Clamshell bucket: ✓ These cars will be newly built with expected delivery in April/May 2027. THESE WILL RECEIVE AN EXEMPTION FOR THE ZERO-EMISSION ZONE UNTIL 2040!! Some features: DAF XF480 8x4 triple Last axle steerable and liftable Palfinger 20 tm Z crane with remote control Palfinger hook arm etc PHOTOS ARE OF AN IDENTICAL VEHICLE, which we have already sold in the past. = More information = Axle configuration Front axle 1: Steering; Tyre profile: 100% Front axle 2: Steering; Tyre profile: 100% Rear axle 1: Double wheels; Lift axle; Steering; Tyre profile: 100% Rear axle 2: Double wheels Functional Crane: Palfinger Q200 Z EPOSOLUTION !! RADIO REMOTE!!, year of manufacture 2026, behind the cab Extendable superstructure: Yes Condition General condition: very good Technical condition: very good Visual appearance: very good Damages: none Financial information Csdez N Ey Dspfx Aktsri Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), power: 221 kW (300.48 HP), fuel type: diesel, color: other, mast type: telescopic, Equipment: air conditioning, General information Year of manufacture: 2018 Year of construction: 2018 Csdow I Htfjpfx Aktori Operating hours: 7.499 Drivetrain Drive: Track Engine type: Liebherr D936 Weights Empty weight: 50.500 kg Functional Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Front View Camera - Hammer/sorting function - Liftable cabin - Radio Bluetooth - Rotation function - Work lamp(s) = Remarks = Drivetrain Internship / Tier: Stage IV / Tier IV final General Country of production: France Condition CE type: CE Liebherr R946 with 27 meter cosben telescopic arm, Standard excavator equipment with hydraulic quick coupler, 2 x digging bucket and hydraulic tilting bucket, Hydraulically lifting cabin, Cameras, CE & Complete documentation available.

Condition: good (used), Year of construction: 1980, Forklift attachment, crane arm, load arm -Manufacturer: stabau, crane arm, load arm for forklifts -Type: TKR25 Load capacity: 2500 kg -Receiver: LSP 500 mm / ESP 400 mm, dimensions see photos -Number: 2x crane arms available Csds Ahgtfopfx Aktori -Price: per piece -Transport dimensions: 1400/1350/H425 mm -Empty weight: 123 kg/unit

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Credpfx Akjywzhkstei Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30275651, product height (max.): 2,200 mm, The NOXON MAS 3 X5 314 is an advanced, self-propelled stretch wrapping robot designed for the automatic and efficient wrapping of palletized goods with stretch film. Thanks to its mobile design, the machine can move around the pallet, eliminating the need for a fixed wrapping station or turntable. This makes the robot particularly suitable for companies that want to wrap different types of pallets in various locations within their warehouse or production environment. Csdpfx Akj Ah H R Ieteri The MAS 3 X5 314 stands out due to its dual, independently controlled pre-stretch motors. This allows the stretch film to be variably pre-stretched between 0 and 400%. The pre-stretch ratio and film tension can be adjusted via the control panel. This ensures that the film can be optimally adjusted to the type of load, weight, and desired stability. The machine features the advanced X5 control panel with a color touchscreen, which allows various wrapping programs to be easily set and adjusted. The operator can, among other things, determine the wrapping height, the number of wraps at the top and bottom, and the film parameters. This allows a suitable wrapping program to be compiled for each application. Thanks to the automatic pallet detection and adjustable wrapping parameters, the MAS 3 X5 314 ensures consistent and reliable packaging. Moreover, the N-Connect system enables real-time monitoring, processing, and archiving of machine performance and usage data. The combination of mobile deployment, advanced film control, and extensive programming options makes this stretch wrapping robot a suitable solution for companies that want to optimize their pallet packaging, control film usage, and increase the stability of their loads. Key features: - Self-propelled stretch wrapping robot: moves independently around the pallet without the need for a fixed turntable. - Dual pre-stretch motor: two independently controlled motors ensure variable and precise film pre-stretching. - Variable pre-stretch from 0 to 400%: adjustable according to the type of film and desired load stability. - X5 control panel: user-friendly 7-inch color touchscreen for setting and managing wrapping programs. - Adjustable film parameters: the film tension can be adjusted via the control panel. - Automatic height detection: detects the height of the pallet via a photoelectric sensor. - Programmable wrapping cycles: various parameters can be adjusted to specific packaging needs. - N-Connect: real-time monitoring, processing, and archiving of machine data. - Mobile deployment: suitable for different work zones and pallet sizes. The buyer is 100% responsible for the transport of the machine. We only place the machine on a pallet and secure it firmly.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, The unit is out of service but fully functional and is stored in a warehouse. All technical information is contained in the technical specification attached to this advertisement – a .pdf file in English. Cjdps Ahgv Eofx Aktjri

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, · Max. Tragkraft 6000 kg · Max.Hubhöhe 25.90 m · Maximale seitliche Reichweite 21.70 m · Gesamtlänge mit Gabeln 9.28 m · Länge bis zur Vorderseite der Gabeln 8.08 m · Gesamtbreite 2.50 m · Gesamthöhe 3.10 m · Gesamtbreite der Kabine 0.96 m · Bodenfreiheit Maschine 0.38 m · Radstand 3.05 m · Kippwinkel 12 ° · Schüttwinkel 110 ° · Drehung des Oberwagens 360 ° · Gewicht 18000 kg · Gabeln Länge / Gabeln Breite / Gabelquerschnitt 1200 mm x 100 mm x 60 mm · Reifenmodelle 445/65 R22,5 · Antriebsräder (vorne / hinten) 2 / 2 · Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang · Stützentyp Zweifach-Teleskop · Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig · Hersteller Yanmar · Motornorm Stage V / Stufe 4 · Motor Modell 4TN107FHT-6SMU1 · Nennleistung Verbrennungsmotor / Leistung 156 Hp / 115 kW · Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm · Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ · Kühlsystem des Motors Wasserkühlung · Anzahl Batterien / Batterie 2 x 12 V · 12V Battery capacity 120 Ah · Battery starting current (EN)850 A · Getriebetyp Hydrostatisch Csdpfjzzrtcex Aktori · Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 · Max. travel speed 40 km/h · Zugkraft 8600 daN · Parkbremse Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorder- und Hinterachsen · Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % · Pumpenart Verstellpumpe · Hydraulikfördermenge 185 l/min · Hydraulikdruck 350 bar · Motoröl 13 l · Fassungsvermögen des Kraftstofftanks 270 l · Abgasnachbehandlung für Diesel (AdBlue®) 24 l · Geräuschpegel im Fahrerstand (LpA) 68 dB · Umgebungsgeräusch (LwA) 108 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Steuerungen 2 Joysticks · Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 · Anbaugeräte Erkennungssystem (E-Reco) Standard

Year of construction: 2020, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: MHTP8, RYWAL MHTP8 Welding Rotator, Head & Tail Stock, 8 t Manufacturer: RYWAL-RHC Sp. z o.o. Type: MOST HEAD TAIL-STOCK-8t Serial number: MHTP8-011 Catalog number: MOST MHTP8 Year of manufacture: 09/2020 Credps Ahza Defx Aktji Load capacity: 8,000 kg Power supply: 400 V Frequency: 50 Hz Rated current: 25 A Installed power: 9 kW Machine weight: 2,300 kg Technical data: Maximum load capacity: 8,000 kg Rotation speed: 0.2-0.68 rpm Lifting speed: 500 mm/min Maximum torque: 24000 Nm Maximum lifting torque: 862 Nm Vertical adjustment range: 550-1880 mm Plate diameter: 750 mm Max. working diameter: 3600 mm Height: 2550 mm Width: 1000 mm Length: any For sale: MHTP rotator with an 8-ton load capacity, designed for rotating and positioning heavy parts during welding, assembly, and processing of steel structures. Its robust construction and smooth speed adjustment ensure precise and safe operation. The machine is suitable for production plants, shipyards, and companies involved in the production of steel structures. The device is in working order, and testing is possible while in operation.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Cjdpfx As Afhr Toktsri Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Crsdpoy Rvfqofx Aktoi Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 We can organise shipping / delivery for you.

Condition: new, Year of construction: 2020, Cantilever racking – NEW Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Center distance: 131 cm - NEW – immediately available from stock. - 750 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized finish. - Cantilever arms in hot-dip galvanized finish. - Arms are bolted on. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Racking consists of: - 04 x uprights, incl. base approx. 416 cm, made of IPE160. - 12 x cantilever arms approx. 120 cm, made of IPE 100 - incl. all necessary connecting elements and screws. Why BLT cantilever racking? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All specified load capacities of the racking uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed both indoors and outdoors and will not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets according to DIN EN 15048-1. Crsdo Ahnvdspfx Aktji - Long reorder guarantee - Upright base and upright back are welded together, providing additional safety and shorter assembly times, as the feet do not need to be screwed to the upright back. - Connections made of angle steel, eliminating the need for adjustment with tensioning bolts. This shortens assembly time. - No elongated hole system, thus no weakening of the upright profile. Price: €2,653.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, impact protection, etc., can also be purchased from us. Our recommendation: Let us know your requirements… We will be happy to assist you in realizing your projects, from planning to ordering to assembly. Delivery can be arranged by us at a favorable price upon request.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 400 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 400 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2462.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Cedpfe Ahnwfex Akteri Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), Year of construction: 2021, Pallet wrapper, ergonomic stretch wrapping machine with film-saving unwinder – used: Price ex works: €1,950 (net) Manufacturer: KEMAPACK Type: Stretchmobil PWR-A4 Year of manufacture: 2021 The device is not self-propelled; only the carriage movement is motorized. Space-saving and cost-effective pallet wrapping, requires only 600 mm of space around the pallet, for all types of packaged goods up to a maximum pallet height of 2,000 mm, ideal for light and unstable products, can be used in various locations, Credo Ahw Nrepfx Aktji start/stop control via toggle switch, stretch wrapping machine with motorized pre-stretch 100% Connection: 100-240 V / 50/60 Hz Battery: 24V / 17 Ah, sufficient for up to 70 pallets Suitable film type: PE hand stretch film 17-35μ with a film width of 500 mm Battery charger included The motorized carriage movement guarantees an extremely ergonomic working method. This makes it possible to wrap even low and light or unstable pallets very comfortably and without effort. Condition: good Available: immediately Location: 65479 Raunheim

Condition: used, Year of construction: 2014, operating hours: 180 h, machine/vehicle number: FA54, Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour Introduction to the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour This machine is a used shrink wrapper model 32, manufactured by Tetra Pak in 2014. It handles the secondary packaging of aseptic carton containers, which manufacturers commonly use for liquid food products. Currently, operators have stored the unit, and they classify it as fully automatic, featuring a straight-line feed system. Moreover, it has only 180 hours of operation, which ensures minimal wear and high reliability. In terms of productivity, the machine reaches a performance level of 9,000 bricks per hour. Supported package configurations The Shrink Wrapper 32 offers a high degree of flexibility in terms of package configurations. Consequently, it adapts well to a variety of operational setups. It supports multiple layouts, including 3×1, 3×2, 3×3, 4×1, 4×2, 4×3, 5×1, 5×2, and even the Straw configuration for packs with pre-applied straws.As a result, this versatility makes the machine suitable for integration into modern, high-capacity Tetra Pak filling lines. Furthermore, it enables seamless transitions between different packaging formats without compromising efficiency. Compatibility with the 200 ml EDGE format This model works specifically with the Tetra Pak EDGE 200 ml format, which remains a standard choice for juices, dairy, and ready-to-drink products. In addition, the EDGE format requires both precision handling and consistent film application—criteria the Shrink Wrapper 32 fulfills reliably.Therefore, by combining this format with the various supported configurations, operators can address a wide range of packaging needs. Additionally, this compatibility enhances line flexibility and product presentation.As a result, the Used Shrink Wrapper Tetra Pak year 2014 9000 bricks/hour serves as a high-performing option for technical teams aiming to maintain speed and versatility. Operating features and safety systems of the Used Shrink Wrapper Tetra Pak Cods Adyxvjpfx Aktjri The system opera...

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net Codpfxs Ahnw Ro Aktjri + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2018, functionality: fully functional, empty load weight: 350 kg, load capacity: 3,500 kg, construction width: 1,150 mm, Turntable Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Crodpfx Aks Ah I Dretei Condition: Refurbished, no guarantee Technical condition: good Description: If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik. We will gladly provide you with a quote for leasing and financing, as well as delivery at favorable conditions. We can also accept Linde equipment as a trade-in, even if you do not purchase a device from us. The stated operating hours were recorded at the time of listing. Subject to prior sale, changes and errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Credpoy Unmuefx Aktei Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... Codpfxo Ahnylo Aktsri We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2024, functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, total height: 2,500 mm, axle spacing: 1,030 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Credps Ahnx Sefx Aktsi

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. Crodj Ahnw Hjpfx Aktsi - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.