Used Rotating Laser for sale (10,605)

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Magni RTH 6.26 Dsdpfxey Tp Nns Ai Eowd Drive Diesel Year built 2026 Lifting height (mm) 25,800 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Rotating forklift Magni RTH 6.31 Drive Diesel Year built 2026 Lifting height (mm) 31,000 Lifting weight (kg) 6,000 Dwsdpfx Aezz Tixoi Eed

Year of construction: 2007, operating hours: 15,000 h, condition: ready for operation (used), - USED - CO2 LASER CUTTING MACHINE   X-AXIS TRAVEL: 1562 mm Y-AXIS TRAVEL: 772 mm Djdpfx Aijzz Tydo Ejwd Z-AXIS TRAVEL: 100 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 1500 x 3000 mm SOURCE: 2200 W; BYLASER 2200 CONTROL UNIT: BySOFT WEIGHT: 13500 Kg NOTE: No 1 5" HEAD

Condition: excellent (used), power: 18 kW (24.47 HP), fuel type: diesel, fuel tank capacity: 50 l, color: other, Equipment: air conditioning, General information Year of construction: 2025 Operating hours: 476 Technical information Number of cylinders: 3 Engine capacity: 1.700 cc Dwedpfxoz Aam Ho Ai Ejd Drive: Track Engine type: Perkins 403J-17 Empty weight: 3.759 kg Dimensions (LxBxH): 481 x 155 x 248 cm Functional Maximum reach: 487 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - Beacon(s) - Blower - Hammer/sorting function - Hydraulic quick coupler - Radio Bluetooth - Rotation function - Rubber tracks - Sliding leaf - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage V / Tier IV final General Country of production: Engeland Engcon tiltrotator with hydraulic quick coupler, 3 digging buckets and 1 sorting bucket, rubber tracks, air conditioning

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 3823954597, Year of construction: 2019, We are offering 3 sets of ready-to-use SolarMark EFLS industrial lasers, manufactured in 2019. Manufacturer: e-SolarMark Type: EFLS Serial number: 3823954597 Date of manufacture: 05-2019 Price per set. The e-SolarMark eFLS fiber laser is a versatile industrial laser designed for marking a wide range of metals and plastics, including HDPE, OPP, ABS, stainless steel, and titanium. It can be used for both static and dynamic marking. Its compact integration dimensions make it suitable for installation on production lines. This laser coder is made with a fully stainless steel industrial design, making it suitable for use in various industries, including electrical, food, bottling lines, automotive, chemical, cosmetic, dairy, healthcare, and construction. Suitable for Datamatrix code marking. High marking speed. If you have any questions or would like more information, please feel free to send us a message or call us. Djdpfjz D T Iqjx Ai Eewd

Condition: new, functionality: fully functional, overall weight: 100 kg, total height: 1,660 mm, Year of construction: 2026, input voltage: 230 V, laser power: 20 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: Autofocus system - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) Dwsdpozpwmdjfx Ai Eed - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) - weight: approx. 80 Kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Beam on time: 12,577 hours Laser on time: 68,745 hours including Sheetmaster Dwjdpfx Aioznir Aj Eod

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Magni RTH 6.26 Drive Diesel Dsdpfx Aijztf S Aj Eowd Year built 2026 Lifting height (mm) 25,800 Lifting weight (kg) 6,000

Condition: new, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 51,000 mm, total length: 11,520 mm, Rotating forklift Magni RTH 8.51 Drive Diesel Year built 2026 Lifting height (mm) 51,000 Lifting weight (kg) 8,000 Dwjdpjztgd Hsfx Ai Eed

Condition: used, total width: 2,550 mm, Key features Internal reference: 26011G Vehicle model: Clamshell grapple with rotator Vehicle make: Other Dwjdpfx Aoz Hn Rloi Ejd Product category: Crane grapple Condition: Used Weights & Dimensions Vehicle width: 2550

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Dwodez Iprtopfx Ai Eed Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Djdpfx Aisz Iwvgj Eewd

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Doors and walls made of powder-coated steel sheet and aluminum profiles 2 doors, position of the doors can be selected individually (opening approx. 2200 mm) with 1 privacy screen (wavelength 1080 nm (OD 10+)), size approx. 500x300mm without roof (roof and ventilation opening available separately) for lasers with a wavelength of 940-1090nm, power max. 1500W, maximum permissible exposure (MPE) max. 3.67x10^6 W/m² incl. LED strips for signaling at the corners (RGB colors) incl. assembly instructions incl. operating instructions Laser welding machine Exhaust system (not included in the scope of delivery) Dwedpfx Aoz Srckei Eod FURTHER DETAILS AND INFORMATION AVAILABLE UPON REQUEST PLEASE SCHEDULE A SITE VISIT WITH US.

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. Dedpfx Aisz Tdc Se Eswd The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - Max.Hubhöhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah Dwsdpez Ntddofx Ai Ejd - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS02, LYBRA Easy OPRS / 6 Programs The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Djdpfez Irx Njx Ai Ejwd Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S26LybraOPRS03, LYBRA Easy OPRS / 6 Programs With automatic cord formation to reinforce the winding in various steps on the pallet. The LYBRA OPRS is a semi-automatic stretch wrapping machine with a rotating arm that combines key load securing technologies in a compact solution. Thanks to the rotating arm, it is particularly suitable for heavy and unstable loads and optimizes load stability during handling, storage, and transport. Dodoz Ir Haopfx Ai Ejwd ``` TECHNICAL DETAILS - Control panel with key display - Diameter Ø 1,700 mm - Maximum loading dimensions: 1,200 x 1,200 mm - Winding height (incl. pallet): 2,450 mm - Loading height measurement via photocell in automatic mode - Acceleration/deceleration ramps controlled by frequency converter - Adjustable lifting speed (up/down movement) via frequency converter - Safety touch protection - Mushroom-shaped emergency stop button compliant with CE standards - Machine reset button compliant with CE standards - Audible signal at cycle start and phase stop at cycle end ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display - Standard cycle (up and down) - Half cycle (up only or down only) - Full cycle with lower windings on the same Starting height - Fast cycle (with limited or no overlap) - Layer cycle - Economy cycle (to save some bottom wraps) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 operator-created wrapping programs - All function parameters adjustable on the display - Adjustable speed from 5 to 12 rpm - Carriage lifting speed (up and down movement) independently adjustable from 1.3 to 5.4 m/min - 1 to 10 wraps on the bottom - 1 to 10 wraps on the top - Reinforcement wraps during the wrapping process ACTIVABLE FUNCTIONS: - Key lock - Cycle with start and stop at pre-programmed height - Pallet wrapping height with height sensor (photocell off) - Top sheet cycle, soft start cycle - Wrapping cycle with reinforcement and adjustable number of wraps - Comfort height for easy Roll Change FILM SLIDE OPRS – Motorized pre-stretching system with 2 electronically driven rollers with interchangeable ratios: 150% - 200% (standard) and 250%; – Outer film roll diameter: 250 mm; – Core diameter: 76 mm; – Roll height: 500 mm; – Roll weight: 20 kg; Additional systems available immediately from our Ludwigsburg warehouse. Image similar, may include options.

Condition: excellent (used), Bystronic BySprint 3015 2kW Fiber Laser With Byloader Sheet Loader And Shuttle Table. New 2011. Upgraded head and new fibre fitted in 2020 at a cost of £46k. Djdpfxoz It U Ss Ai Eswd Maintained by Bystronic. Fume extraction. Available with Nitrogen plant including Sauer Tornado Booster Compressor.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: Matricola: 40EV.147, The EBC40 HT/42D 600rpm extruder was manufactured by Comac (year of manufacture 2012). The motor is an AC motor with a power of 60kW. The extruder is equipped with an Omron-made PLC. The cabinet is fitted with an air conditioner. A degassing system with a 2.2kW liquid ring vacuum pump is included; the extracted gases are allowed to settle in a dedicated container for easy cleaning. The extruder is equipped with a twin-screw extrusion head, including a pressure and temperature transducer (newly supplied). Below are the specifications of the proposed model: Dsdo Afnqcopfx Ai Eewd Screw diameter: 42 Screw speed: 600rpm Motor power: 60kW L/D ratio: 42 Effective penetration ratio: 1.5

Condition: used, machine/vehicle number: 1175, Year of construction: 2015, operating hours: 2,763 h, load capacity: 4,000 kg, lifting height: 18,000 mm, overall weight: 13,900 kg, Hubhöhe: 18,0 m Tragkraft: 4.000 kg Gesamtgewicht:13.900 kg Antrieb: Diesel Allrad Ausladung ca. 15,5 m Einzelkabine mit 1 Sitz Antrieb über 4 Zylinder Kubota Dieselmotor Teleskop- Stahlbauweise Reifengröße 405/70-R20, Profil 10-18 mm, Radstand 2750 mm, Radformel 4x4 Gesamtmaße (L x B x H) 6250 x 2300 x 3000 mm Dwsdpjzuk Ufjfx Ai Eed Hydraulische 4- Punkt Abstützung 4700 x 3900 mm Funkfernsteuerung Palettengabel 1450 x 1520 x 660 mm Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For sale – TRUMPF TruLaser Cell 8030 L60 (2015) | 3D laser cutting system Professionally dismantled and stored – ready for immediate pick-up. The machine ran in series production until shutdown, was serviced annually and exclusively by TRUMPF, and has now been professionally dismantled by us and stored at our site in Gouzeaucourt (northern France). Ideal for automotive, aerospace and general metalworking requiring precise 3D contour cutting of tubes, hydroformed parts and complex profiles. Machine data - Model: TRUMPF TruLaser Cell 8030 L60, year 2015 - Laser power: 3,000 W (TRUMPF) - Serial number: S1631C0047 - Maintenance: annual service exclusively by TRUMPF – full documentation available - Status: dismantled, stored, ready for pick-up Key benefits - 5-axis CNC kinematics for demanding 3D geometries - Enclosed, automation-ready working area - Proven in one-off and medium series production - Complete TRUMPF service history – no third-party interventions Our added value: modular handover We are not a dealer but an active contract manufacturer (SOERMEL Groupe, France – IATF 16949 / EN 9100 / ISO 9001). Choose the package that fits: M1 – Ex works: pick-up at our site in Gouzeaucourt, loading onto your truck. M2 – Delivered: M1 + international transport, insurance, unloading at your site (DAP/DDP on request). M3 – Delivered & installed: M2 + mechanical installation, utility connection, first start-up, laser alignment. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. A second identical machine is also available. Inspection of the stored machine in Gouzeaucourt by appointment. Price on request. Dwedpfx As Ad Hcuoi Eod

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 219400 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 4100 x 2070 mm 4100 mm 2070 mm 125 mm 4064 x 2032 mm 240 (für 3 - 12 kW) / 400 kg/m² 3900 (für 3 - 12 kW) / 64 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 32 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change Dwedpfxex Urp Ho Ai Esd

Condition: new, neu Dsdpfx Aijx U Elbo Eswd ca. 12 - 14 Wochen ab Auf Türkei 185300 € 3502.17 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 3100 x 1525 mm 3100 mm 1525 mm 125 mm 3084 x 1524 mm 240 (für 3 - 12 kW) / 400 kg/m² 2200 (für 3 - 12kW) / 360 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 6 kW 12 kW 15 kW 20 kW Mild steelS235 25 30 35 40 Stainless steel(304) 15 25 35 40 Aluminium (5083) 20 30 35 40 Copper 10 15 15 15 Brass(CuZn39 Pb3) 12 20 20 20 OPTIONS: Suction unit with filter Sheet handling systems Automatic nozzle change

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 84,893 h, machine/vehicle number: A0420A0151, control type: CNC control, controller manufacturer: Siemens, controller model: Siemens Sinumerik 840D (TRUMPF MMC), laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF 3200, laser hours: 32,832 h, laser power: 3,200 W, type of cooling: water, year of last overhaul: 2019, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, TRUMPF Trumatic Lasercell 1005 – 3D Laser Welding System (3.2 kW) Used, ready-to-use 3D laser welding system (Type TLC 1005) Special modification for 3D laser welding (adapted beam guidance) Laser cutting is not possible in the current configuration Special version with a powered rotary table for highly precise round and multi-sided processing Basic data & performance: Manufacturer: TRUMPF Laser- und Systemtechnik GmbH Model: Trumatic Lasercell 1005 (Type TLC 1005) Year of manufacture: 2005 Laser power: 3,200 W (Resonator TRUMPF TLF 3200) Serial number: A0420A0151 Connected load: 68 kVA Operating hours: Dsdpfx Asz Rzikoi Eewd Processing time (beam on): approx. 32,832 h (pure welding time with active laser beam) Operating time (laser on): approx. 84,893 h (total operating time of the resonator incl. standby) Condition, scope of delivery & history: Scope of delivery includes cooling unit (chiller) and Herding dust extraction/ventilation system (Type DELTA 1200-12/9 SC, year 2004) The system was taken over from a VW plant in 2019 Professional installation, technical commissioning and inspection carried out by GIMTAS in September 2019 Sale & processing: On-site inspection possible after prior arrangement Price negotiable Dismantling and transport preferably carried out by the buyer

Condition: refurbished (used), Refurbished Duo 65 M. Very good condition. 1 year warranty. Price after Contact. Dwedpfsix Nl Sox Ai Ejd