Used Rotary Engine for sale (19,938)

Condition: good (used), Thomas Hill Engineering Rotary air rinse Stainless, Rotary air rinse, 18 station, mobile, 3Ph Fgjdpfjvw Srbjx Anwob

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Fodpfeyw T D Dox Anwogb Complete with one mobile oven rack In good working condition

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Fsdpfxsyy U Shs Anwogb Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Fedpfjfvqmxsx Anwogb Hydraulic

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. Fgodpfx Aeq Nfuzonwjb When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture Fodpjq Igyvsfx Anwogb - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Year of construction: 2022, operating hours: 320 h, condition: as good as new (ex-display), functionality: fully functional, working width: 2,100 mm, type of cooling: water, working length: 6,000 mm, machine/vehicle number: Serien Nr.000025, World first: Meltio has reinvented 3D laser printing with this machine. With this unit, you can use welding wire and the corresponding 3D data to produce any conceivable component made from metallic materials. (see photos) We are a specialist dealer for welding technology and operate an application center for laser welding technology. The machine offered is located in this application center. Meltio Engine – 1.2 kW laser power, 976 nm wavelength, multiple 200W direct diode lasers – power supply 400V with 2-5kW. Equipped with active water cooling. Fjdsyk D T Uopfx Anwogb For wire diameters 0.8-1.2 mm. Advanced control module for equipping existing robotic systems with Meltio technology. 390x660x1000 mm – 90 kg. Transform any motion platform into a metal 3D printing system, subject to size restrictions. Meltio Engine Dual Wire – dual-wire welding system for different materials in the welding head. Meltio Engine Hot Wire – inductive wire preheating. Meltio powder feeder, 2x with USB connection. Can be used individually. Enables users to calibrate the Meltio multi-laser deposition head precisely and effortlessly before each print. KUKA KR30 with 2100 mm reach, 6-axis robot including KRC4 controller and robot control panel – rated payload: 30 kg KUKA DKP400 turn-tilt table – load capacity 400 kg 3 m linear axis for the robot (can also be omitted) The area must be designed to be laser-safe; partitioning or construction works are not included in this offer. No manufacturer’s warranty; the system will be delivered in working condition, spare parts availability is guaranteed. The complete systems are CE certified.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN744944, Year of construction: 2025, operating hours: 15 h, load capacity: 2,000 kg, lifting height: 3,000 mm, free lift: 150 mm, load center: 500 mm, fuel type: electric, Jungheinrich forklift from 2025 with only 15 operating hours! TECHNICAL DETAILS Load capacity: 2,000 kg Lift height: 3,000 mm Free lift: 150 mm Load center: 500 mm Fork length: 1,200 mm MACHINE DETAILS Power type: electric Mast type: Duplex Power: 9 kW Battery capacity: 750 Ah Remaining battery capacity: 100% Battery voltage: 48 V Tyre condition: 100% Own weight without battery: 2,350 kg Battery weight: 962 kg to 1,094 kg Operating hours: 15 h Fgodpfoy Nc Rwjx Anwob EQUIPMENT Lighting Clamp hydraulics Pallet forks Side shifter Fork rotator (180 degrees)

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 8,220 h, load capacity: 6,000 kg, lifting height: 3,550 mm, fuel type: diesel, construction height: 2,750 mm, power: 85 kW (115.57 HP), motor manufacturer: DEUTZ, DGUV certified until: 05/2027, fork length: 2,000 mm, Equipment: CE marking, UVV, full service history, lighting, Linde H 60 D-02 Diesel Forklift with the following specifications: Operating hours: 8,220 Lifting capacity: 6,000 kg Lifting height: 3,550 mm Construction height: 2,750 mm Year of manufacture: 2013 LINDE 6.0 tonne diesel forklift, open cabin, new front tyres – very good rear tyres, telescopic full-visibility mast, 3rd valve, mini-lever control, dual-pedal operation, front and rear lighting, fork length 2,000 mm Includes service according to LINDE manufacturer’s specifications and valid UVV safety inspection. The following options are available at additional cost: Fodpfxeyza A Ij Anwsgb - Side shifter - Alternative fork lengths Viewing, demonstration, and test drives are available by prior telephone arrangement. Sale is exclusively to commercial customers. Subject to prior sale, errors, and typographical mistakes. We can deliver your new forklift cost-effectively with our own ramp low-loader (transport costs on request). More information and offers can be found on our website.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 9349-0010, functionality: fully functional, Used: rotary hearth furnace / mandrel hardening press Manufacturer: Aichelin Model: Drehherdofen Aichelin RDGs 270 Control: Siemens S7-300/317-2 PN/DP Year of manufacture: 2012 Max. temperature: 950 °C GAS Fjdpfx Anew Rrxfswsgb

Condition: used, Dimensions (LxBxH): 170 x 65 x 160 cm Price: On request - Details: - └ Description: Roller width 1050mm - Documentation available: No - CE certificate present: No - Voltage [V]: 220 Fgodpjyymxyjfx Anweb - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1995, rotary table diameter 600 mm boring diameter 600 mm grinding height 450 mm control Siemens Sinumerik 840 C total power requirement 30 kW weight of the machine ca. 14,5 t Fgedpfoy Nfdajx Anwob

Condition: excellent (used), Year of construction: 1991, Technical Specifications HBX 360 Distance between centers (mm): 750 Center height (mm): 180 Maximum turning diameter over bed (mm): 360 Maximum turning diameter over cross slide (mm): 180 Spindle bore (mm): 37 Maximum cross slide travel (mm): 180 Cross slide width (mm): 160 Tailstock quill travel (mm): 150 Tailstock quill diameter (mm): 46 Bed width (mm): 335 Compound slide travel (mm): 110 Compound slide width (mm): 110 Type of quick-change toolpost Spindle taper type Tailstock Morse taper: MT5 Fedpfx Aney H Dxwowjgb Spindle speed (rpm): 50 to 3000 Spindle speed variator: Yes (hydraulic) Spindle motor power (kW): 4.5 Cross feed range (m/min): 0.0125 to 5.6 Rapid longitudinal feed range (m/min): 56 to 112 Thread cutting: Yes Metric threading (number) (mm); Whitworth thread range (tpi) Brake motor Electrical supply: 380V three phase Overall dimensions (mm): 2000 x 1000 x 1250 Weight (kg): [not specified] Chuck: Manual/Hydraulic 3-jaw Equipment: - 2-axis Heidenhain digital readout - Work light - 3-jaw manual chuck - Quick-change toolpost - Foot brake

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 410 kg, This is a used and tested tilt-turn positioner KUKA DKP 400.1 manufactured in 2007. The system is designed as an external supplementary axis for industrial robots and is typically used in welding, assembly, and machining applications. With a payload capacity of 400 kg and two axes (rotation and tilting), the positioner allows for optimal workpiece alignment and significantly enhances accessibility for the robot. Integration is carried out directly through the robot controller. Fsdpfx Aey Nfm Uenwegb

Condition: used, Lumsden 93 ML Vertical Spindle Rotary surface Grinding Machine, fitted with 60 inch dia magnetic chuck. Auto sizing. Table Guards, Coolant tank, with pump. Serial Number 93ML 60/11616. Option to be supplied with updated electrical controls, please contact for more details. Under power ready for immediate supply. Fsdoy N Ultepfx Anwogb

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Fodpfx Ansy Idrtswjgb Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Fgsdpfx Aehun Tzenwsb Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Fgjdpsixt H Nofx Anwjb Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: new, table diameter 715 mm table load 500 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1 UpM T-slots 6 x M16 Fedpfx Anoyv Nxzowjgb Tilt Angle 90-180-110 ° Tilting Speed 30 sn min./90° weight of the machine ca. 675 kg

Condition: new, table diameter 900 mm table load 1.000 kg Frontal Loading Center (A) 150 mm Side Loading Center (B) 150 mm Rotating speeds 0,1 - 1,1 UpM T-slots 6 x M16 Tilt Angle 90-180-105 ° Tilting Speed 30 sn min./90° dimensions 2100x920x1100 mm Fgedpfxoyv I Ris Anweb weight of the machine ca. 930 kg

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Fgjdpfey Icntex Anwjb Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Fsdpfx Aey Ia Tmenwegb Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Fgedpfx Anow R St Nsweb

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Fedpfx Answ R Syiswogb

Condition: new, all stainless steel turn table new diameter 1.250 mm adjustable height 820 – 910 mm Fgedpfxeytn Nxs Anwob safety guard (height 10 mm) 1 speed (3 rpm) 0,12 kW also available with variable speed