Used Rotary Table Boring for sale (51,646)

Condition: used, Year of construction: 2007, table length 3000 mm table width 2000 mm table load 25 t longitudinal adjustment 1500 mm rapid traverse 6 m/min total power requirement 12 kW Gbedpfxew Rrbts Ah Eew weight of the machine ca. 18,5 t dimensions of the machine ca. 5 x 2,3 x 1,2 m Table has hydrostatic guideways and SPS (Siemens) control.

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min Gsdpfxovb A Uus Ah Eebw longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t Godpou N D Tlofx Ah Esbw table adjustment - longitudinal: U-Achse: 2000 mm table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Gbedpfet Hwq Rex Ah Eow Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Year of construction: 1999, condition: used, table length mm table width mm table load t plate width 2980 mm plate depth 3000 mm Gbodjgxqvzjpfx Ah Eew plate height 1400 mm total power requirement 11 kW weight of the machine ca. t required space m

Condition: used, Year of construction: 1988, table length 2000 mm table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad table positioning 4 x 90 ° feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW weight of the machine ca. 7,6 t Gedpfx Ahetv H Txs Esbw

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° Godpfx Aeu N D Szoh Eebw table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional *

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Gsdpfjhmzkbex Ah Eobw Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: Gbedpfx Asu N D Rqoh Ejw -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw Gjdpou N D Sbsfx Ah Ejbw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel Gbsdpeu N Ebdjfx Ah Eow T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Gbedpfxsfvqmxs Ah Eew Hydraulic

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm Gsdpfjxr U T Tex Ah Eebw EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: used, Year of construction: 2006, rotary table diameter 1200 mm Control Siemens 840 D internal grinding diameter 1450 mm swing diameter 1500 mm workpiece weight 3000 kg z-travel 1200 mm feeds z-axis 0,01-10.000 mm/min x-travel 1900 mm feeds x-axis 0,01-15.000 mm/min b-axis 280 ° weight of the machine ca. 25 t dimensions of the machine ca. 8,6x5,5x5,5 m Spindle 1 Diameter 230 mm -Speed ??2,000–12,000 rpm -Grinding height 820 mm -Power 25 kW Gbsdpfx Aexuv Hgjh Ejw -Tool holder HSK-C80 Spindle 2 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 700 mm -Power 15 kW -Tool holder V 56 Spindle 3 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 700 mm -Power 15 kW -Tool holder V 56 Spindle 4 Diameter 140 mm -Speed ??1,500–4,500 rpm -Grinding height 1,100 mm -Power 15 kW -Tool holder V 56 Workpiece measurement

Condition: used, Year of construction: 1980, workpiece diameter 600 mm workpiece weight 400 kg workpiece height 300 mm total power requirement 35 kW Gbsdjt Abrwjpfx Ah Eow weight of the machine ca. 4500 kg

Year of construction: 1991, condition: used, table load 3000 kg swivelling range 360 Grad vertical motion range 1380 mm Gedpjvuz N Defx Ah Eobw stroke speed 1900 mm/min 360 ° total power requirement 4 kW weight of the machine ca. 5400 kg dimensions of the machine ca. 3800 x 3700 x 4200 mm Clamping plate distance: 2800 mm Support arm rotation angle: 360° - Operating instructions

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating Gbedpfswugczex Ah Ejw 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), 1.- Plate size Ø 400 mm 2.- Centre bore 3.- Centre height 250 mm 4.- Working position Vertical Plate (horizontal axis) 5.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis (Horizontal Plate) 1.250 Kg * Vertical Axis with tailstock (Horizontal Plate) 1.250 Kg 6.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and a radial rigid one at the back. This offers a great rigidity to the table. 7.- Transmission by SPIRSIN gears in hardened steel. Ratio 90/1 Ref. 90-90/1-I 8.- Transmission between motor and pinion by pulleys and toothed belt. Ratio 48/36=1,333/1 9.- Total Ratio: 120/1 10.- Motor torque recommended (Type Alpha iF12/3000 HV): 12Nm 11.- Motor speed: 3.000 rpm 12.- Max. rotation speed: 25 rpm 13.- Hydraulic clamping system……………P = 50 bar. 14.- Clamping torque…………….3.800 Nm 15.- Pressure switch for clamp / unclamp signals confirmation. 16.- Maximum axial force…………….. 55.000 N. 17.- Tangential torque……………. 3.800 Nm. 18.- Tilting moment…………… 8.950 Nm. 19.- Equipped by a precision HEIDENHAIN encoder, type RCN 2390F, direct in the plate´s shaft. a. Positioning …………….. ± 5 seg b. Repeatability ……………. ± 1,5 seg 20.- Flatness of the plate turning 0,030 mm 21.- Squareness between the base and the plate …0,020 mm 22.- Concentricity of centre bore 0,010 mm 23.- Weight without motor (approx.) 380 Kg 24.- Indexing time (90°, include clamping/unclamping) …… 1,5 seg Indexing time (180°, include clamping/unclamping) …… 2,5 seg TECHNICAL DATA: TABLE SUPPORT SD.250.F/D.400-H 25.- Table support without transmission, free rotation. It will be rotated from the drive table (table B). 26.- Plate size: Ø 400 mm Prepared to receive and fix a special device developed by the client. 27.- Centre bore: Hole to centre the special device developed and decided by Dalian 28.- Eleven (11) fluid exits on the plate. They will be taken through the centre shaft of the plate. Entrances of the fluid at the rear of the table support. Threads 3/8 NPT. 29.- Centre height: 250 mm 30.- Working position:Vertical plate (horizontal axis) 31.- Load capacity (centred in the plate): * Horizontal Axis (Vertical Plate) 500 Kg * Vertical Axis with rotary table (Horizontal Plate) 1.250 Kg 32.- Round plate Ø 400mm fixed to the table´s saddle through a precision and combined THK type bearing, type RE25025 and 2 radial bearing. This offers a great rigidity to the table. 33.- Hydraulic clamping system……………P = 50 bar. 34.- Clamping torque…………….3.800 Nm This clamping fixed to the rotary table one, both would operate simultaneously 35.- Flatness of the plate turning 0,030 mm Godpfehq Uklox Ah Ejbw 36.- Squareness between the base and the plate … 0,020 mm 37.- Concentricity of centre bore 0,010 mm 38.- Weight without motor (approx.) 240 Kg NOTE: PRICE INCLUDES ROTARY TABLE + ENCODER + MOTOR

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotary table diameter: 800 mm, overall weight: 6,500 kg, grinding wheel diameter: 400 mm, workpiece diameter (max.): 1,000 mm, grinding wheel width: 80 mm, TECHNICAL DETAILS Workpiece diameter: 1,000 mm Rotary table diameter: 800 mm Max. distance from rotary table to grinding spindle center: 850 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm MACHINE DETAILS Total power requirement: 25 kW Grinding spindle motor: 11 kW Dimensions & Weight Space requirement (L x W x H): approx. 4,100 x 3,200 x 2,600 mm Machine weight: approx. 6,500 kg Gedpfxexr U R Eo Ah Esbw EQUIPMENT Coolant system 500 liters with paper band filter 4 grinding wheels (3 unused)

Condition: used, Year of construction: 2008, rotary table diameter 1200 mm boring diameter 150 mm Godjxuv Haepfx Ah Ejbw z-axis 1550 mm feeds z-axis 0,2-1500 m/min rapid traverse Z-axis 12 m/min x-axis 2300 mm feeds x-axis 0,2-1500 mm/min rapid traverse X-axis 12 m/min Diameter of the table 1200 mm swing diameter 1400 mm control Siemens 840D swivel range of b axis +/-180 ° total power requirement 110 kW weight of the machine ca. 40 t dimensions of the machine ca. 9x4,5x4,7 m Multi-spindle head with 4 stations - Spindle stations 1-3 - Spindle size D=140x630mm - Grinding wheel diameter 200/400mm - Adjustable grinding spindle speed 1500-4500 rpm - Drive power 15 kW - Spindle station 4 High-frequency spindle - Maximum grinding wheel diameter 230mm - Adjustable grinding spindle speed 2820/12000 rpm - Drive power 25 kW Station 5 Renishaw touch probe

Condition: used, Year of construction: 1988, control Heidenhain 355 tool adaptor SK50 weight of the machine ca. 8 t Gedpof Tdvbjfx Ah Eobw +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), 1.- Faceplate size..... Ø350 mm 2.- Centre bore ..... Ø52H7 3.- Plate height (Vertical axis) ..... 300 mm 4.- Centre height (Horizontal axis)..... 300 mm 5.- Overall height ..... 450 mm 6.- "T" slot width ..... Central 12H7//Rest 12H10 Gbedpfx Ahehq Un Ns Eow 7.- Clamping system in both axes ..... Hydraulic 8.- Load capacity (centred in plate): * Vertical axis (Horizontal plate)..... 200 Kg * Horizontal axis (Vertical plate)..... 200 Kg * With tailstock..... 300 Kg 9.- Rotating axis allowable torque (70- 90/1-R)..... 1.400 Nm 10.- Tilting axis allowable torque (70- 90/1-R)..... 1.400 Nm 11.- Resolution in both axes..... 0,001º 12.- Rotating axis transmission ratio ..... 180/1 13.- Tilting axis transmission ratio ..... 180/1 14.- Rotating axis indexing accuracy (Heidenhain ROD285C) ... ± 7 sec. 15.- Tilting axis indexing accuracy (Heidenhain ROD285C) ..... ± 7 sec. 16.- Rotating axis clamping pressure..... 50 BAR 17.- Tilting axis clamping pressure..... 80 BAR 18.- Rotating axis clamping torque..... 1.200 Nm 19.- Tilting axis clamping torque..... 2.800 Nm 20.- Rotating axis motor speed ..... 2.000 rpm 21.- Tilting axis motor speed ..... 2.000 rpm 22.- Rotating axis speed..... 22,22 rpm 23.- Tilting axis speed ..... 22,22 rpm 24.- Rotating axis recommended motor torque..... 8 ¸ 12 Nm 25.- Tilting axis recommended motor torque..... 12 ¸ 18 Nm 26.- Rotating axis max. transmissible torque ..... 430 ¸ 645 Nm 27.- Tilting axis max. transmissible torque ..... 645 ¸ 970 Nm 28.- Weight (approx.- without motors)..... 600 Kg NOTE: PRICE INCLUDES ROTARY TABLE + 2 ENCODERS + 2 MOTORS

Condition: used, Year of construction: 2008, rotary table diameter 1200 mm boring diameter 150 mm z-axis 1550 mm feeds z-axis 0,2-1500 m/min rapid traverse Z-axis 12 m/min x-axis 2300 mm feeds x-axis 0,2-1500 mm/min rapid traverse X-axis 12 m/min Diameter of the table 1200 mm swing diameter 1400 mm control Siemens 840D swivel range of b axis +/-180 ° total power requirement 110 kW weight of the machine ca. 40 t dimensions of the machine ca. 9x4,5x4,7 m Gbodpoxuv E Nefx Ah Eow Multi-spindle head with 4 stations - Spindle stations 1-3 - Spindle size D=140x630mm - Grinding wheel diameter 200/400mm - Adjustable grinding spindle speed 1500-4500 rpm - Drive power 15 kW - Spindle station 4 High-frequency spindle - Maximum grinding wheel diameter 230mm - Adjustable grinding spindle speed 2820/12000 rpm - Drive power 25 kW Station 5 Renishaw touch probe

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 +++++ Please note: Gedpfx Aohy T Nvsh Eobw The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1990, x-travel 1600 mm Gbsdpfxswlvtdo Ah Eow ja weight of the machine ca. 13,7 t