Used Roundo Ps 280 for sale (24)

Condition: excellent (used), functionality: fully functional, control type: CNC control, actuation type: hydraulic, controller model: Siemens, number of rollers: 3, roller (top) diameter: 205 mm, side roll diameter: 205 mm, sheet thickness (max.): 6 mm, overall weight: 6,800 kg, total length: 5,500 mm, total width: 2,200 mm, total height: 2,200 mm, Equipment: emergency stop, hardened rollers, Hardned and Grounded rolls Dwedpfx Aj Ah Rzuei Eod Fully Hydraulic machine Hydraulic drop end Central lubrication NEW Opperator panel with SIEMENS Display NEW JOYSTICK Rotation and Positioning rolls CE-Safety line Rolling width: 4500mm Rolling thickness 3x toproll Ø:4mm Rolling thickness 5x toproll Ø:6mm Rolling thickness prebending: 3mm Top Roll Ø: 205mm Side roll Ø: 205mm Rolling speed: 0 - 5 Adjustiment lower roll: 0 - 100mm/min. Adjustment side rolls: 0 - 100mm/min. Power: 11kW Length: 5500mm Width: 2200mm Height: 2200mm Weight: 6800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1980, 2500 mm x 340 Ømm top roller Rolling capacity: 2500 x 23 mm (5 x top roller diameter) Dsdeyz Acwspfx Ai Eswd Max. sheet thickness: 2500 x 15 mm Equipped with top crane and side support

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement. Dedpfx Ae Ad Nrlei Eewd

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Bending width: 3000mm. Pre-bending capacity: 31mm at 3000mm plate width. Reference material: Steel with yield strength of 240N/mm². Pre-bending diameter at specified capacity: greater than 630mm. Control system: Separate control panel with joystick control for roll and support adjustment. Equipped with hydraulically adjustable bottom rolls, overhead plate support, side plate support and hydraulically operated drop-end bearing. Inspection possible by arrangement. Dwedpfx Aij Ad Nq Ue Eod

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 385, roller (bottom) diameter: 700 mm, roller (top) diameter: 700 mm, working width: 3,000 mm, sheet thickness (max.): 77 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 4 pcs. Number of driven rollers: 4 pcs. Sheet thickness: max. 77 mm Pre-bending thickness: max. 65 mm Working width: max. 3,000 mm Dodpfx As Aidv Iji Eewd Diameter of top roller: 700 mm Diameter of bottom rollers: 700 mm MACHINE DETAILS Control system type: 2021 Seven X CNC Drive type: Hydraulic Power: 163 kW Dimensions & Weight Dimensions (L x W x H): 6,500 x 3,450 x 3,930 mm Unladen weight: 94,000 kg Transport packages: 1 pc. EQUIPMENT Documentation CE marking CE certificate

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control Dsdpfe Ahkinex Ai Ejwd - Conical bending attachment: a device for rolling cones and funnels.

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Dwodpszuzpyefx Ai Esd Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, total length: 4,700 mm, total width: 1,200 mm, total height: 1,400 mm, Year of manufacture: 1991 Colour: Green Empty weight: 7.500 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 914931 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 14 - Max. prebending thickness [mm]: 6 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 255 - Bottom roll diameter [mm]: 255 - Options: Cone rolling - Transport dimensions: 4700mm x 1200mm x 1400mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dodoz Euawopfx Ai Eowd Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 802315, shaft diameter: 105 mm, roller (bottom) diameter: 275 mm, roller (top) diameter: 275 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Shaft diameter: 105 mm Top roller diameter: 275 mm Dwodpfxo Aidwtj Ai Eed Bottom roller diameter: 275 mm Power: 5.5 kW Resistance torque: 30 cm³ Capacity, round material diameter: 60 mm MACHINE DETAILS Control: Conventional Drive type: Hydraulic Design: Horizontal and vertical Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,400 x 1,400 mm Unladen weight: 2,500 kg Transport packages: 1

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. Dodpoz Nhlisfx Ai Eewd The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: used, Year of construction: 2002, Technical details: table load: 2 t table diameter: 1500 mm Total power requirement: 12 kW table rotating: 360 continouss Grad table - inclinable: -30 - 100 Grad Dodpfx Aj Ahwr Eei Eswd swival range +/-: 130 Grad height of the swivelling axis: 1005 mm machine weight approx.: 3,7 kg rotary table revolutions per minute : Infinitely variable, hydraulically controlled drive Torque: 15.000 Nm dimensions LxWxH: 2,8 x 1,6 x 1,2 m

Condition: good (used), Year of construction: 2001, Technical data: Working width: 4700 mm Max. bending capacity: 3.0 mm Max. bending angle: 3.0 mm CNC control Diameter of upper roller: 255 mm Diameter of side lower rollers: 255 mm Diameter of central lower roller: 255 mm Conical bending mechanism through angled positioning of the two side rollers Hydraulic tilting bearings Mobile control panel with display CE marking Dimensions (length x width x height): approx. 7200 x 2000 x 1800 mm Dsds Ah Hucjpfx Ai Eewd Weight: approx. 9 tons Accessories: Side sheet support device Condition: Very good condition The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, mount diameter: 3,000 mm, For sale: Pullmax F13C forming machine for steel bottoms/ends. The machine is in good condition and ready for operation. Inspection possible. Maximum bottom thickness: 13 mm. Maximum diameter: 3000 mm. Included: - Upper forming roll R50 and R30, - Lower forming roll R50. Dodpfx Aszrt Aasi Eewd

Condition: used, functionality: fully functional, We currently have a Roundo bending machine available for sale. This machine is capable of bending large-size wide-flange beams — even when cold — into radii or cambered shapes. It is a robust and versatile unit, ideal for companies looking to enhance or expand their steel-forming capabilities. Dwjdpfxsxn I Rwe Ai Eed

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Dodpfx Aozhmbuoi Eowd

Condition: used, total length: 1,330 mm, total width: 1,040 mm, total height: 1,150 mm, Empty weight: 1.800 kg Price: On request - Drive system: Conventional - Drive: Hydraulic - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Shaft diameter [mm]: 75 - Top roll diameter [mm]: 225 Dodpfx Asxuf Sloi Eowd - Capacity diameter round [mm]: 60 - Transport dimensions: 1330mm x 1040mm x 1150mm (l x w x h) - Transport weight [kg]: 1800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 1998, Technical Data: 2 hydraulically adjustable rollers 3 driven rollers Display with digital readout Bending moment: 110 cm/3 Shaft diameter: 180 mm Roller diameter: 460 mm Main motor power: 15 kW Dimensions (L x W x H): approx. 2400 x 2000 x 1600 mm Weight: approx. 7.8 t Dwodpjy Rxuzjfx Ai Eod Accessories: Various tools Condition: Very good, almost as new The seller assumes no liability for typing or data transmission errors. The machine complies with its age in terms of appearance, technology, and wear; used machines are sold without any warranty.

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Dedpfx Aod N Ahdji Eowd

Condition: good (used), Year of construction: 1990, Length:2000mm Width:1500mm Height:1500mm Dwedpfxezc Iw Uj Ai Esd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Dwedpfx Asytyf Ssi Esd Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Height:2200mm Dwjdpfsycu E Eex Ai Eod Weight:2900kg

Condition: refurbished (used), BENDING ROLL MACHINE SHEET METAL LENGHT 4000mm SHEET METAL THICKNESS 15mm 3 BENDING ROLLS PREBENDING WEIGHT: 23.000kgr THE MACHINE IS IN TOP CONDITION LIKE NEW NEW ELECTRIC PANEL, NEW ELECTRIC CABINET, NEW CABLES, NEW SEALS, MOTOR AND PUMB RESTORATION Dwjdpfx Ajhxyilsi Ejd

Condition: refurbished (used), BENDING ROLL MACHINE ROUNDO SHEET METAL LENGHT 2500mm SHEET METAL THICKNESS 30/25mm Dodpfxshx N Uks Ai Eswd 3 ROLLS WEIGHT: 19.000kgr

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Digital displays for the position of the side rolls Dwodpfoiinlljx Ai Ejd Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual