Used Rubber Feed Rollers for sale (19,507)

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,630 h, Year of manufacture: 2021 Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4 Nwodpfx Agjx Sqhij Iec

Condition: used, fuel tank capacity: 340 l, Year of construction: 2007, operating hours: 7,460 h, Year of manufacture: 2007 Empty weight: 19.000 kg Nwsdpfex Sqg Sex Ag Ijc Dimensions (LxBxH): 634 x 230 x 302 cm Engine type: Deutz Deutz TDC 2012 L06

Condition: used, Year of construction: 2020, operating hours: 2,960 h, Year of manufacture: 2020 Empty weight: 16.000 kg Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4 Nwjdpexqfdtofx Ag Ioc

Condition: used, power: 115 kW (156.36 HP), Year of construction: 2021, operating hours: 3,350 h, Year of manufacture: 2021 Empty weight: 16.000 kg Nwodpfsxb Aymox Ag Ioc Dimensions (LxBxH): 595 x 231 x 296 cm Engine type: Deutz DEUTZ TCD 4.1 L4 156CV Roller width: 2140 mm

Condition: good (used), Magnetic roller, magnetic roller, magnetic separator, cooling water skimmer Nodpfx Agowt Nxis Iewc -Magnetic roller: Magnetic separator with rubber roller -Magnetic roll: Ø 130 x 310 mm -Rubber roller: Ø 68 x 310 mm -Dimensions total: 440/400/H240 mm -Weight: 26 kg

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Nsdpfx Agoyk E T No Iswc General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: used, 3700mm long, 960mm high, and adjustable Nwedjv Dauqjpfx Ag Iec Storage location: Nattheim

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 31620 € 603.94 € 0.4 - 2 mm 600 mm 1200 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls Nsdsynnf Njpfx Ag Iswc OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 31080 € 593.63 € 0.4 - 3 mm 400 mm 1200 mm² 80 mm 75 m/min 10 m/s² 10 Nm Nwedpfx Agsynnf Aj Ijc helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 28390 € 542.25 € 0.4 - 3 mm 300 mm 900 mm² 80 mm 75 m/min 10 m/s² 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment Nodjynnfvspfx Ag Iewc servo drive and control SIEMENS 7" colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,--

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 13760 € 264.19 € 0.4 - 2 mm 400 mm 300 mm² 63 mm 150 m/min Nsdpfx Agjynncns Ijwc 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,--

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12950 € 248.64 € Nedpfx Agjynnchs Iowc 0.4 - 2 mm 300 mm 300 mm² 63 mm 150 m/min 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,--

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 12630 € 242.5 € 0.4 - 2 mm 200 mm 300 mm² 63 mm 150 m/min 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- Nwedjynncbspfx Ag Isc

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke, mounted on handling device, handling system, manipulator for screwdriving technology. Screwdriving Unit: BÖLLHOFF / BOSCH REXROTH Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriver unit features a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are installed to enable full automation. Screwdriver 1 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 straight drive head Screwdriver 2 consists of the following components: - Rexroth type servomotor - Rexroth type 0 planetary gearbox - Rexroth type 0 encoder - Rexroth type 0 offset drive head Nsdpfefx Hyfsx Ag Iswc Dimensions (WxHxD): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring travel: 20 mm Last screws used: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current draw: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Reduction ratio: i=18.9 Max. torque: 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Reduction: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive head Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.2 kg Installation length: 90 mm Offset drive head Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach (swung out): max. 860 mm Swivel radius at full extension: max. 360° Guide column vertical: Ø 30 mm Guide columns horizontal: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for limiting swivel radius Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as base plate Blue steel base plate is not included in the scope of delivery.

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Njdpsdzqmzofx Ag Iswc Ideal for cutting out non-woven fabrics or similar for breathing masks.

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent Nsdsdzqltepfx Ag Iowc - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: used, Heavy Duty Powered Roller Conveyor KASTO with Steel Support Rollers Straight roller conveyor section with highly robust steel support rollers Roller conveyor length: 2000 mm Usable width (roller width): 500 mm Conveyor height: 880 - 930 mm Number of rollers: 7 pieces Roller spacing: 4x 295 mm, 2x 390 mm (center-to-center) Roller diameter: Ø 100 mm Transport speed level 1: 3 meters/min Transport speed level 2: 13 meters/min Nsdsu Uwygspfx Ag Iswc Motor power: 0.17 / 0.7 kW Electrical connection: 400 Volt, 50 Hz - Reversible operation (right and left) - 2 transport speeds via drive motor with 2 speeds - All rollers driven, chain drive - Drive via FLENDER HIMMEL geared motor - Geared motor with brake - 1 adjustable-height support foot via slotted holes - Very robust and heavy design with ball-bearing steel rollers - Metal base frame, frame length 2230 mm Required space (L x W x H): 2650 x 870 x 900 mm Net weight: 580 kg Good condition

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Nwjdpjif Sg Ssfx Ag Isc Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: used, Heavy-duty roller conveyor with steel support rollers Year of manufacture: approx. 2000 Roller conveyor length: 4950 mm Usable width = roller width: 485 mm Total conveyor width: 580 mm Conveyor height: 950 mm Number of rollers: 7 pcs Roller pitch: 850 to 620 mm (center to center) Roller diameter: Ø 90 mm Axle diameter: Ø 20 mm - Very robust construction made of angle steel 130 x 65 x 8 mm Transport dimensions: length 4950 mm, width 580 mm, height: 950 mm Net weight: 360 kg Nodpfsw E Nwpox Ag Iswc In good condition

Condition: new, 3000 mm Nwodpfx Agoxaai Ae Ioc Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 107 kg Furnishing: - Outfeed roller conveyor with stop - Optimal aid for supporting long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers - Universally applicable for e.g. metal circular saws, Band saws, woodworking machines, ... - The roller conveyors consist of a stable Construction made of special profile - Problem-free and efficient material transport for the supply and removal of workpieces

Condition: new, 3000 mm Working width 360 mm roll diameter 60,0 mm weight max. in kg 900 kg height adjustment 620 - 1055 mm weight 66 kg Description: The RB 10 roller conveyor is a particularly practical aid for Nwodpfx Aexaaf Djg Iec the support and movement of long and heavy workpieces. It can be used individually and expanded as required and through the retrofittable PVC-coated rollers can also be used for delicate materials. Furnishing: - Infeed roller conveyor - Optimal aid for the support of long and heavy workpieces - Roller support steplessly height adjustable and clampable - Safe workpiece support thanks to massive and heavy duty galvanized steel rollers

Condition: used, Roller conveyor, length,1500 mm - Working width 1300 mm - Overall width ~ 1.590 mm - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 Nsdpfxsvupd Aj Ag Iewc - Location, in stock

Condition: used, Year of construction: 2009, Driven roller conveyor with PVC-coated transport rollers for transporting workpieces. Power transmission via flat belt via transmission shaft. Absolutely smooth running even at high feed rates, feed frequency controlled. Technical data: - Year of manufacture 2009 - Transport length: 2,500 mm - Working width, usable: 1,300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roller diameter: 64 mm - Roller pitch: 125 mm - Adjustable feed rate (manual): 3-15 m/min Njdpfxeumvlme Ag Iewc - Installed power: 0.37 KW

Condition: used, Year of construction: 1998, - Producer Sorbini Nodpfx Aovupc Eog Iowc - Type T/20MF - Year of construction 1997 - Working width 1.300 mm - Maschine is overhauling, very good condition - Working height ~ 880 - 920 mm - Part height ~ 5 - 80 mm - Operating side, left - roller diameter ~ 248 mm - Metering roller ~ 174 mm - Reverse drive - Double diaphragm pump 1 Stk. - Length 950 mm - Width 2.550 mm - Height 1.540 mm - Weight ~ 1.220 kg - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Voltage fluctuation max. +/- 5 % THE PICTURES are not original pictures, They are only an example of a reconditioned machine

Condition: used, Year of construction: 2001, machine/vehicle number: A 01 02 004/ 0300, - Manufacturer: Venjakob - With dust cover including folding doors - Ventilation via fans - Fully covered under the rollers - Year of manufacture 2001 - Working width 1,300mm - Working height: 900 +- 20mm - Roller diameter: 80mm Nwsdpfoumvmqsx Ag Iec - Roller pitch: 140mm - Feed speed: ~ 2-8m/min. - Location: in the warehouse - without control cabinet