Used File Paternoster for sale (633)

Condition: used, Year of construction: 2001, Five Kardex vertical lift modules are available. 1) Kardex SHUTTLE-250-2450X863-NT, year of manufacture: 2000, max. tray load: 260kg, total payload capacity: 28500kg. 2) Kardex SHUTTLE-500-1850X863-NT, year of manufacture: 2000, max. tray load: 430kg, total payload capacity: 15000kg. 3) Kardex SHUTTLE-500-2450X863-NT, year of manufacture: 2000, max. tray load: 350kg, total payload capacity: 28500kg. 4) Kardex SHUTTLE-500-2450X863-NT, year of manufacture: 2000, max. tray load: 350kg, total payload capacity: 28500kg. 5) Kardex SHUTTLE-500-2450X863-NT, year of manufacture: 2000, max. tray load: 350kg, total payload capacity: 28500kg. Inspection possible by arrangement. Bjdpfj Ah H Rnsx Anpoww

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM Bjdpfsy Hb Upox Anpoww PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine Bwodpfewclkyox Anpsw - Strip magazine not for sale - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), Year of construction: 2017, functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Bwodoup R U Uepfx Anpew Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: used, Carpet Carousel System, 5 Meters Carousel system for carpet and flooring rolls. Bjdpfx Ansz Ahyhepjww Robust and fully functional carpet carousel system. This system is ideal for space-saving, vertical storage and presentation of carpets, PVC rolls, or other heavy roll goods. For 5-meter carpet rolls. Capacity: approx. 12–16 support rods / roll positions. The carpets and flooring for the respective carousel system can be purchased separately for €1,000 net. “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More items – new and used – can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Bjdpfsw I E Dcox Anpjww

Year of construction: 1996, condition: good (used), We are offering a used Kardex/Paternoster for sale. Technical specifications: Length: 3,400 mm Width including tray: 1,960 mm Width without tray: 1,650 mm Height: 6,200 mm Compartments: Length: 2,950 mm Width: 620 mm Bwjdpokuyk Ajfx Anpow Height: 110 mm If you are interested, please contact us.

Condition: used, Year of construction: 1989, Gewinner Euromat Type: Gewinner Euromat Machine No.: 120-50508-18 Year: 1989 Bwedpfx Anjya Dklepjw Machine height: approx. 5600 mm Machine width: approx. 3300 mm Machine depth: approx. 1450 mm + 330 mm table top Number of trays: 18 Tray width: approx. 2450 mm Tray depth: approx. 520 mm Tray height: approx. 500 mm Compartment load capacity: 510 kg Total load capacity: 9100 kg Colour: Beige front / corners blue

Condition: good (used), Year of construction: 1993, Hänel Type: Rotomat 950 Bwjdjzza Izjpfx Anpow Device No.: 61246 Year of Manufacture: 1993 Device Height: approx. 5600 mm Device Width: approx. 3420 mm Device Depth: approx. 1250 mm + 300 mm tabletop Number of shelves: 38 Shelf width: approx. 2860 mm Shelf depth: approx. 410 mm Shelf height: approx. 220 mm Shelf load capacity: 238 kg Total load capacity: 9,044 kg Color: beige/blue

Condition: ready for operation (used), Year of construction: 2007, A vertical Hänel compact paternoster is available. Number of containers: 67, max. container load: 250kg, max. container dimensions X/Y: 1300mm/825mm, height increment: 75mm, max. total load: 20000kg. Documentation available. An on-site inspection is possible. Bwodpfx Aey Ax Tbenpow

Condition: used, Year of construction: 1993, Hänel Bodpfxezy R Ipj Anpjww Type: Rotomat 970 Device No.: 61458/1-2 Year of manufacture: 1993 Device height: approx. 4360 mm Device width: approx. 3420 mm Device depth: approx. 1250 mm + 300 mm tabletop Number of shelves: 29 Shelf width: approx. 2930 mm Shelf depth: approx. 445 mm Shelf height: approx. 230 mm Load per shelf: 161 kg Total load: 4,669 kg Color: beige/blue

Condition: used, Year of construction: 1993, Hänel Type: Rotomat 970 Device No.: 61458/1-2 Year of manufacture: 1993 Device height: approx. 4360 mm Device width: approx. 3420 mm Device depth: approx. 1250 mm + 300 mm tabletop Number of shelves: 29 Shelf width: approx. 2930 mm Shelf depth: approx. 445 mm Shelf height: approx. 230 mm Load per shelf: 161 kg Total load: 4,669 kg Bodpfxozy R Iio Anpeww Color: beige/blue

Condition: used, Year of construction: 1991, Number of shelves: 10, three-phase mains connection: 380V, N/PE, frequency: 50Hz, duty cycle: 40%, supply fuse rating: 6A, rated power consumption: 1500W, an on-site inspection is possible. Bsdpfxjzzqcis Anpsww

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. Bwedpeq Rcmtsfx Anpjw The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Equipment: documentation/manual, The unit is out of service but fully functional and is stored in a warehouse. All technical information is contained in the technical specification attached to this advertisement – a .pdf file in English. Bwedpfo Ahgv Ejx Anpsw

Condition: used, Year of construction: 2003, Storage lift, Hänel type: 1300-825, year of manufacture 2003, with MP12 D control system and 2 retrieval stations (can also operate with only one retrieval station). Container dimensions: 1300 x 825 mm, maximum load capacity: 500 kg. Includes 36 containers (can accommodate up to 56 containers). Maximum load capacity: 30,000 kg. Installation area: 5939 mm high, width: 1625 mm, depth: 2810 mm. Bwsdpfez Ad Sgex Anpow Further data can be found in the data sheets. All documents and plans are available. The storage lift is disassembled and stored, and is available for immediate delivery.

Condition: used, Year of construction: 1988, operating hours: 7,355 h, functionality: fully functional, machine/vehicle number: 660/88, total width: 1,505 mm, total height: 705 mm, total length: 1,375 mm, space requirement width: 1,370 mm, space requirement length: 1,600 mm, space requirement height: 1,125 mm, We are selling a Spänex briquetting press, model SHB 50. The machine is not assembled, but it can be connected to a power source to demonstrate its functionality. The press includes a large chip collection container, so that the press can be placed under an extraction system, which automatically feeds the chips to the press. The press can, of course, also be operated without the collection container. Documents (instructions and wiring diagram) are available. The functionality of the system has been tested. We purchased the system used, but we were unable to install it due to structural reasons. You can view the system in the brochure under the PDF file "Assembly example," which shows how it looks when assembled. The extraction system shown in the image is not included in the offer. Bodo Agvn Dspfx Anpsww

Condition: ready for operation (used), Year of construction: 2007, A 4-level vertical dryer Giardina with a paternoster system for water-based and solvent-based coatings with flash-off, heating and drying zones is available. Workpiece length range: 300mm-3200mm, workpiece width range: 0mm-1350mm, workpiece height range: 0mm-80mm, working height: 950mm, door arrangement: vertical, number of doors: 16, number of trays: 66, levels: 4, accessibility: all sides, number of heating coils: 3. Machine dimensions X/Y/Z: approx. 5350mm/7550mm/6550mm, electrical cabinet dimensions X/Y/Z: 2500mm/500mm/2000mm. Documentation available. An on-site inspection is possible. Bwedpfx Anjzqu Hkepsw

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0/130084, total width: 5,000 mm, load capacity per storage section: 220 kg, construction height: 2,800 mm, input voltage: 400 V, input frequency: 50 Hz, Used storage lift / paternoster / shelving unit / organizational aid, fully functional, manufacturer: Eska Rollenpaternoster Application: workshop, warehouse, sales, retail, auto parts, etc. Type: TRPA, machine no. 0/130084 Overall height 2800 mm, overall width 5000 mm, circle diameter 685 mm, number of levels: 9, total load capacity 1980 daN The storage lift is fully functional and is no longer needed by us. Bedpfxs Aa Rffo Anpeww Shipping is only possible with payment of costs and advance payment (net). Sold as is, we assume no warranty or guarantee, no returns.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, total height: 6,000 mm, total width: 2,200 mm, total length: 2,900 mm, load capacity per storage section: 430 kg, input voltage: 380 V, empty load weight: 3,000 kg, Brand Model Year Height × Width × Depth Shelves Load capacity: 430 kg KARDEX Shuttle 500-1850 × 813-NT 2000 6,000 mm × 2,200 mm × 2,900 mm 52 (1850mm x 813 mm) Bwodpfxj Afyxxo Anpjw CPU C2000 Maintained by Kardex until April 2025. Dismantling scheduled for late November 2027, east of Rennes. Loading onto a semi-trailer (tautliner) is possible. Delivery of the dismantled machine is possible, including an electrical and mechanical identification plan + videos of the dismantling process for those who wish to reassemble it themselves. Alternatively, delivery and reassembly/start-up are possible anywhere in Europe with a maintenance contract. Reassembly is possible: NT models are no longer manufactured, so parts are becoming scarce. We can have it reassembled by our partner, who has the parts, and provide maintenance with a potentially equivalent user manual.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1591, Equipment: documentation/manual, Dienst horizontal case erector – used, fully functional, and removed from a production line. It is stored in a warm and dry hall. The unit comes with a complete set of technical documentation, including a declaration of conformity. Detailed technical information regarding the design and performance can be found in the attached file – a document in German. Bjdpj Af Uthjfx Anpsww

Condition: good (used), Maximum part length: 3 m Bedpfx Aszzq S Renpsww Maximum package depth: 1 m Maximum package height: 1.7 m Equipped with a Siemens control system

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options Bwjdpfx Aeziu Hzsnpew This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: good (used), Year of construction: 2014, Manufacturer: Hänel Type: Lean Lift Year of manufacture 2014 Device dimensions: H 6302mm approx. W 2805 mm D 2810 mm Shelf 40 pieces up to 400kg per container H 57mm D 825mm W 2460mm Bwedpfx Aovt Euzjnpsw Total load: 40,000kg (2×20,000kg)

Year of construction: 2012, condition: good (used), Type: IND-PA Device No.: 0/1220744/1 Year of manufacture: 2012 Bwjdpfxshyhlgs Anpsw Device height: approx. 5600 mm Device width: approx. 2870 mm Device depth: approx. 4000 mm Number of rollers: 45 Roller width: approx. 2370 mm Shelf load capacity: 200 kg Total load capacity: 9000 kg Color: beige