Used File Paternoster for sale (630)

Condition: like new (used), Year of construction: 2021, We now have a Vertical Carousel from 2021 available for sale. The machine is in very good condition and has been serviced annually by the manufacturer since installation. The Vertical Carousel has a total height of 6,435 mm, making it suitable for many different types of storage and operations. It has a carrier width of 3,050 mm and a depth of only 428 mm. With 30 carriers, the machine provides a total of 39.2 m² of effective storage space. One of the main advantages of this machine is its space-saving design. It only requires approximately 4.7 m² of floor space, making it an excellent solution for companies that want to increase their storage capacity without needing more floor space. The machine also has very low operating hours, indicating that it has been used very little. It has always been kept in a clean and well-maintained environment. Technical information: Dcsdpfx Akoz Aphao Aep Model year: 2021 Model: MEG.RS.350.1.3050.4.381.30 Machine height: 6,435 mm Machine width: 3,675 mm Machine depth: 1,271 mm Number of carriers: 30 Maximum carrier height: 320 Carrier width: 3050 Carrier depth: 428 Electronics: 3/N/PE 400V, 16A

Condition: excellent (used), Technical information: 1. Kardex Number of upright frames: 13 Dimensions: L 3.46 x W 1.70 x H 4.8 m Djdsz Eqc Ujpfx Ak Ascp Weight of racking unit: 3.5 tons Load capacity per upright frame: 3 tons

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Dcsdpoz R I U Ijfx Ak Ajp Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 6582018005, year of last overhaul: 2025, workpiece weight (max.): 2,000 kg, power of the milling unit: 8,400 W, disc diameter: 250 mm, cutting length (max.): 30 mm, Подробна информация за машините е описана в прикачения файл. Dsdpfx Aeztxv Usk Ascp Detailed information about the machines is provided in the attached file.

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, Swift-Cut CNC Plasma Cutting Machine Type 1250 with zone-controlled extraction table Technical Specifications: - Cutting area for sheet sizes up to 1250 x 1250 mm - Maximum gantry clearance height: approx. 100 mm - Lowered guide rails for easy loading - Gantry park position enables easy loading of full sheets from above - Robust welded steel frame with polyester powder coating - Lightweight cutting head for high cutting performance and easy maintenance - Linear guides with smooth-running V-rollers - Powerful 4 Nm stepper motors - Drive system: Coupled hybrid stepper motors. Dual synchronized rack and pinion drive (Dual Drive) on Y-axis. - Digital Torch Height Control (DTHC) – fast response time for improved cut quality and extended torch consumable life - Direct Cut Control (DCC): Automatic software control of cutting current (amperage) and air pressure directly via the CNC user interface (fully compatible ONLY with Hypertherm Powermax torch & plasma power supply) - Hypertherm plasma system error messages are displayed directly on the Swift-Cut control screen - Collision protection: Magnetic torch breakaway system. Shuts down the system within a fraction of a second in the event of a collision to prevent torch damage. - Proximity sensors for reliable and robust switching operations - Down draft extraction table - Zoned extraction table for efficient fume extraction - Easily removable cutting supports - Freestanding operator’s console with PC and flat panel LCD monitor - Wireless keyboard and mouse - Multiple emergency stop (E-stop) - USB and network connectivity Software: - Solid Edge CAD software Dedpfxjy Snwnj Ak Aocp - Swift-Cam 1 powered by Libellula; CAD/CAM software - Functions include conversion of any DXF files to Swift-Cut machine code - Manual nesting of parts and standard shapes - Pre-installed cutting tools and image library for consumable recognition - Part library with pre-made standard drawings - Swift-Cut CNC control software - Program simulation - Operating system: Windows 7 Included paid optional accessories: - Swift-Trace camera for capturing hand-drawn templates and converting them into DXF files - Swift-Marker unit – integrated pneumatic marking system. Automatic marking of text, bend lines, and center points - Hypertherm DuraMax plasma torch package Basic dimensions: Console: 650 x 550 mm Machine: 1900 x 1700 mm

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 173, functionality: fully functional, pressing force: 1,000 t, stroke length: 170 mm, table width: 800 mm, table length: 800 mm, distance table to ram: 470 mm, total length: 2,950 mm, total width: 1,950 mm, total height: 4,090 mm, overall weight: 26,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, The press is in perfect working order, has a CE marking, and is equipped with a recent electrical cabinet, as well as an upper and lower ejection system (see the attached technical data sheet and photos). Originally installed in Italy, it is now stored and available for inspection at our Peschadoires workshop in France. This machine is available for sale immediately. Dodpfx As Ahw Dmjk Ascp A technical file is available with the press. Price upon request.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: Powerline FA 500.3, HSM Powerline 500.3 The flagship model of the HSM Powerline high-performance document shredder series. This powerhouse is perfectly suited for shredding large quantities of documents in archives or central shredding facilities. Djdpfx Akey Anvrj Ajcp Premium materials and HSM’s proven high manufacturing standards, "Made in Germany," ensure that the machine is safe and built to last. Specification Application: Archives / Central Offices Cutting type: Particle cut Cut width: 3.9 mm Particle length: 40 mm Security level (DIN 66399): E-3 | F-1 | O-3 | P-4 | T-4 Sheet capacity, 80 g/m²: 180 – 200 Cutting speed: 210 mm/s Throughput: 340 kg/h Drive power: 7.5 kW Voltage / Frequency: 400 V / 50 Hz Feed width: 500 mm Collection volume: 530 l Noise level (idle): approx. 65 dB(A) Weight: 905 kg Colour: Anthracite, Iron Grey, Light Grey Media to be shredded: Paper, staples and paper clips, credit cards, CDs/DVDs, USB sticks, crumpled paper, floppy disks, computer files

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 600 h, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, controller model: SafanDarley E-Control, bending force (max.): 35 t, working width: 1,275 mm, stroke length: 300 mm, distance between stands: 1,375 mm, installation height: 1,000 mm, operating speed: 180 mm/s, reverse speed: 180 mm/s, number of axes: 7, table height: 100 mm, back gauge: 1,000 mm, back gauge speed R-axis: 150 mm/s, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 4,900 kg, total length: 2,250 mm, total width: 1,820 mm, total height: 2,515 mm, power: 0.011 kW (0.01 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, pressing force: 35 t, clearance between the columns: 1,375 mm, height adjustment type: electric, table width: 60 mm, Equipment: CE marking, safety light barrier, The E-Brake Premium 35t-1250 is the fastest servo-electric press brake on the market, manufactured by SafanDarley. Lenze servomotors controlled by frequency inverters from the same company enable fast and reliable operation of the system for many thousands of operating hours. The SAFANDARLEY E-Brake features a patented drive transmission method, which is implemented using reinforced belts. The roller system creates what is known as a multi-block or multi-pulley system. This principle has been known for years, but its successful implementation in SAFANDARLEY press brakes since 1995 has resulted in a press that is approximately 30% faster than hydraulic presses, quieter, more environmentally friendly, and eliminates the need for oil changes. Parameters: SAFANDARLEY servo-electric press brake, model E-Brake 35-1250 - Pressing force: 350 kN (35 tons) - Stroke: 300 mm - Opening: Q = 690 mm - Accuracy of the upper beam: +/- 0.01 mm - Max. bending speed: 10 mm/s - Max. speed of the back gauge fingers: 350 mm/s - Max. reach of the back gauge fingers (third point of reference): 1000 mm - Connected power: 11 kW - Machine width: 2225 mm - Machine depth: 1820 mm - Machine height: 2550 mm - Weight: 4,300 kg - Servo-electric drive (without hydraulic system) SAFAN E-Control – numerical control system - Dual 21'' color split-screen touchscreen (The lower part of the screen enables programming, and the upper part allows viewing PDF documentation, DXF files, or a 3D visualization of the bending process) - Swivel arm - ELO Touch technology Djdjr Axxzepfx Ak Aocp EC20 – 2D graphics program, overlay for the E-Control control system CNC axes: Y1, Y2 – CNC-controlled axes X – CNC-controlled axis deltaX – CNC-controlled axis R – CNC-controlled axis Z1, Z2 – CNC axes Safety light guard – programmable light curtain: Basic function – safety Interruption operation function – 1 cycle / 2 cycles Curtains can be disabled in safe mode WILA NSCL I HC upper adapter – hydraulic upper tool clamping system Safan OBS/3 table – lower tool mounting system, compatible with Wila/Trumpf or Amada tools, table with a width of 60 mm and a 13 mm groove Ergonomic package: cutout in the table for working in a seated position, ergonomic tables, ergonomic chair E-Bend S system – sheet thickness measurement system with automatic deflection correction The machine is in like-new condition. Inspection, testing, and presentation are possible on-site – Sosnowiec. Each unit undergoes a full technical inspection and quality testing by an authorized SafanDarley service center.

Condition: excellent (used), WEINIG UNISTACKER PATERNOSTER STACKER WITH ADDITIONAL HANDLING EQUIPMENT OFFER INCLUDES 1. WEINIG 820 RIGHT ANGLE TRANSFER CONVEYOR. 2. WEINIG (5 BELT) 8M LONG SORTING STATION FEEDING TO PATERNOSTER STACKER. 3. WEINIG 811 UNISTACK PATERNOSTER STACKER. Dcjdpjy D Akasfx Ak Aop 4. 3X STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 500MM. MAXIMUM LENGTH 3100MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE 4. WEINIG 802 SCISSORS LIFT ROLLER CONVEYOR FEEDING TO PACK OUTFEED. 5. WEINIG 812 POWERED ROLLER CONVEYOR OUTFEED. 6. WEINIG CHAIN PACK OUTFEED CONVEYOR

Year of construction: 2015, condition: ready for operation (used), NanoString nCounter Sprint Profiler Analysis System Technical Specifications * Multiplex analysis: up to 800 targets simultaneously * Sample throughput: up to 24 samples per day * Sample capacity: 1–12 samples per run * Hands-on time: approx. 10 minutes * Analytical method: digital molecular counting using fluorescence-labeled reporter probes * Sample preparation and analysis: integrated into a single device * Sample material: total RNA, FFPE-derived RNA, cell lysates, and suitable lysed whole blood samples * SPRINT cartridge reaction volume: 25–35 µl * Dynamic measurement range: up to 6 × 10⁵ total counts * Data export: digital count values, including as a CSV file * Software: nSolver Analysis Software (check availability and license scope) Device dimensions and weight * Width: 107 cm * Depth: 72 cm * Height: 82 cm Dcjdpfo Afcqqex Ak Aep * Weight: approx. 95.25 kg Technical description has been adopted. You are welcome to visit us for a demonstration. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Year of construction: 2024, Wood-Mizer CNC5003 CNC Machining Center – practically unused Key data • Category: CNC machining centers / CNC routers for wood (nesting) • Year of manufacture: [2024] • Condition: practically unused, demo / showroom unit • Location: [KOŁO], Poland • Availability: 2 units in identical specification — discount available if both are taken • Sold directly by the manufacturer, no intermediaries Description An industrial-grade CNC machining center at a mid-range machine price. Why this machine is worth considering • Only premium, branded components — no generic parts: FANUC, HSD, HIWIN, ATLANTA, FESTO, BECKER. Each of these components is serviceable and supported worldwide, independently of us as the machine builder. • FANUC control — the world's most widely used CNC platform, standard ISO G/M code, ready to interface with any CAM system. Support, training, and service are available from any authorized FANUC partner or CNC integrator. • Gantry design with dual drive — high stability and accuracy, high-resolution digital servos, low vibration. • 3095 × 1535 mm working area accommodates a full 3050 × 1530 mm panel — an entire sheet is machined in one setup, with no pre-cutting and no repositioning. • 6-zone vacuum nesting table with 216 vacuum points — exceptional flexibility in work-holding: panels, irregular parts, and porous materials. • The machine is on-site and available for inspection and a test cut before purchase, along with the available technical documentation. Technical data Specification Value Actual working area X / Y 3095 × 1535 mm (max. raster table area) Z-axis travel 200 mm Rapid traverse X / Y / Z 60 / 30 / 15 m/min Djdpfxoyr Dawo Ak Ascp Spindle HSD 11 kW, HSK63F, 24,000 rpm, inverter-driven, ceramic bearings Tool changer ATC — 12-position carousel on the gantry, service access hatch Drives and guideways ball screw, linear guides, and carriages by HIWIN; rack and pinion by ATLANTA Control FANUC, ISO G/M code, PC and CAM interface, built-in server Table grey extruded polypropylene raster table; 6 zones × 36 points = 216 individual vacuum points, each zone with its own valve Vacuum pump BECKER, 126 m³/h, 4 / 5.5 kW, max. vacuum 0.9 bar Pneumatics FESTO Chip extraction articulated extraction hood Control panel movable, on wheels — access from 3 sides of the table; local operation or via network Frame size (footprint) 1570 × 4150 mm Total length / width / height 4460 / 3000 / 2400 mm Materials: wood, sheet materials, plastics, foam, composites, light alloys (aluminum). Terms of sale — stated openly • Sold as-is, without a manufacturer's warranty and without service support from our side — our CNC project has been discontinued. This is the only reason for this price. • Service and wear parts are available directly from the component manufacturers (FANUC, HSD, HIWIN, BECKER, FESTO) and from independent CNC integrators. • Inspection and a test run on-site are welcome — bring your own material and file. • Net price, EXW [KOŁO]. Loading is our responsibility; transport and unloading are the buyer's responsibility. Intra-community supply (0% VAT) for EU buyers with a valid VAT ID. • We can connect you with companies offering commissioning and operator training (third-party service, priced separately).

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 6,010 mm Overall width 3,501 mm Overall depth 1,774 mm 25 carriers, each with a load capacity of 628 kg in the clear internal dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Deposit table at 1,000 mm above floor level, with work surface / plastic surface Djdpfx Akshfxkas Ajcp Color: light gray, surface cleaned, signs of wear possible Motor power, drive: 1 x 5.5 kW / 400 Volt Additional extras: automatic chain tensioning, various intermediate shelves, subject to errors and technical changes Delivery and assembly currently mainly in Germany, Austria and several neighboring countries.

Condition: used, Year of construction: 2024, Year: 2024 Condition: very good Technical specification: - Supported Paper Width: 7.086" to 13.385" (180mm to 340mm) - Supported Paper Length: 10.984" to 27.952" (279mm to 710mm) - Media Thickness: 0.14mm (140 micron) to 0.35mm (350 micron) - Feeder Capacity: 4.13" stacker height (up to 1,000 sheets based on 80gsm) - Media Alignment: Self-centering lockable guides - Dual Tool Holder: Yes - Blade Holder (included): Holds cutting blades; 30º, 45º or 60º for range of media types - Creasing Tool (included): Dual ended (wide & narrow) suitable for ≤350 micron card - Calibration Pen (included): Plotting pen used for auto-calibration. Can be used in either mountable location - Cutting Force: Max. 7.60 N (750 gf) delivered in 190 programmable steps - Maximum Speed: 1,060mm/s (41.73"/s) - Mechanical / Programme Resolution: 0.01254mm / HPGL 0.025mm - Registration System: Vision3 High Resolution CCD Vision System - Cut Position Accuracy: +/- 100 microns - Auto Job Recognition: Yes; instant cut file retrieval with QR code job recognition - Power Supply: 100-240V, 50/60Hz, 100W Average (320W peak) - Dimensions: 32.3"W x 33.46"D x 48.43"H Dsdpo Agvwwsfx Ak Aecp - Max Area Required In Use: 32.3" x 51" x 48.43" - Weight: 300lbs - Compatible Standards: Complies with CE and RoHS Directive - Connectivity: USB, Ethernet LAN - ColorCut Pro Software (Included): Sends projects designed in Adobe Illustrator o - CorelDRAW directly to cutter, adds registration marks and QR codes The Intec ColorCut SC6500 is a revolutionary digital die-cutter and creaser, blending flatbed and sheet fed technology for a fully automated cutter and creaser that will cut and crease any shape on media up to 350 microns thick at speeds up to 1,060mm/s. Targeted for users seeking an affordable, compact, high-capacity cutting solution the SC6500 combines ultra-reliable feeding with an instant job retrieval system and flawless high-speed cutting and creasing for complete unattended production. Choose between DIRECT mode (using computer) or HELD mode for standalone operation with USB drive, enabling wireless remote cutting. The ColorCut SC6500 comes equipped with Dual Tool holder for seamlessly cutting and creasing in one pass, as well as industry-leading ColorCut Pro production software, which enables the operator to use Adobe Illustrator or CoreDRAW to easily generate cut files from the artwork. This machine has been designed to provide unattended operation with particular attention paid to the feeding system to ensure class leading performance for card, vinyl labels or even tricky laminated sheets. A revolutionary suction feed belt system, combines with air blades to separate the top sheet for each feed – and the jogging back wedge ensures any stray media is kept under control. Feed continually from the 1,000-sheet stacker with confidence. Using the Vision3 CCD video camera within the tool head, the SC6500 quickly scans SmartMark registration marks created using the ColorCut Pro software to adjust for scale, skew and rotation, automatically adapting your cut lines to fit your job. Additionally, when creating jobs, ColorCut Pro can apply an auto-assigned (editable) QR code to each design, allowing for automatic cut file retrieval for running any number of mixed jobs in the same stack. We highly recommend the Intec ColorCut SC6500 to anyone looking for a commercial-grade digital die-cutting solution with an entry-level price point. This user-friendly, compact machine is perfect for copy shops, schools...

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Dcsdpfx Asdnfdlek Ajp Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Year of construction: 2021, operating hours: 8 h, condition: like new (used), functionality: fully functional, Tunnel pasteurizer-cooler Tecninox T.P.N. 4x1.2-3P — as new For sale: professional tunnel pasteurizer-cooler, brand Tecninox (Felino, Parma), model T.P.N. 4x1.2-3P, serial number 317/21, year of manufacture 2021. The machine has only been used once for testing and has never been put into production. It is in excellent condition and comes complete with the original operation and maintenance manual. Key features: - Useful length 4,000 mm, width 1,200 mm Dcjdpeywuzwefx Ak Aop - Structure in AISI 304 stainless steel - Polypropylene conveyor belt driven by inverter - 3 Lowara pumps for water circulation - Steam heating with coil and automatic condensate discharge - Multi-stage cooling with spray water - PIXSYS electronic temperature control - Data recorder with USB output (CSV files) - AISI 304 electrical panel with Danfoss inverter - Power supply 380V/50Hz — Installed power 5.5 kW - Steam consumption 200 kg/h at 3-4 bar - Adjustable cycle time from 55 to 240 minutes If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, We supply and install our own, new, digital PLC controllers suitable for warehouse lifts and paternosters from all major manufacturers on the market. Our LTG StoreControl LL (warehouse lifts) and LTG StoreControl P-Touch (paternoster) controllers thus offer replacements for controllers for which spare parts are no longer available. Our controllers easily connect your dynamic storage systems to higher-level warehouse management systems and implement access restrictions. Dcodpfoqlb Smjx Ak Ajp

Condition: excellent (used), Year of construction: 2015, Vertical glass washing machine Maximum glass height: 2500 mm Working direction: from left to right 6 brushes Dcedpfo Afnprox Ak Aop Glass thickness: from 3 to 19 mm Minimum glass size: 300 x 50 mm More technical information can be found attached as Tech. data file Excellent condition ! As is Available immediately

Condition: used, power: 55.16 kW (75.00 HP), pressing force: 1,300 t, stroke length: 254 mm, table width: 890 mm, table length: 1,041 mm, distance table to ram: 590 mm, total length: 3,277 mm, total width: 2,970 mm, total height: 4,331 mm, overall weight: 59,000 kg, Equipment: documentation/manual, The press is currently available for inspection at our workshop, in disassembled condition. Dcedpfxe Ahxaio Ak Ajp We have machined all the bronze bushings, bearings, and the slide (see attached photos). The press is in very good mechanical condition. We have a complete technical file that will be provided with the machine. You will find the photos of the press and the technical data sheet attached. Price upon request.

Condition: good (used), Year of construction: 2007, functionality: fully functional, input voltage: 220 V, empty load weight: 2,000 kg, Ref. Model Year Overall H × W × D Shelves Useful shelf L × W × H, load capacity: 120 kg K1–K2 SYS-120-2011 2006 3,350 × 3,270 × 1,470 mm 20 2,900 × 350 × 260 mm Djdpfxez Eci To Ak Aecp K3 SOLD SYS-120-2011 2008 3,350 × 3,270 × 1,470 mm 20 2,900 × 350 × 260 mm K4–K6 SYS-120-2611 2007 4,200 × 2,660 × 1,470 mm 26 2,200 × 350 × 260 mm K5 SYS-120-2011 2008 3,350 × 2,360 × 1,470 mm 20 2,000 × 350 × 260 mm K7 SOLD SYS-120-2611 2007 4,200 × 2,950 × 1,470 mm 26 2,600 × 350 × 260 mm maintained by Kardex until April 2026

Condition: used, Year of construction: 2022, operating hours: 1,990 h, Doosan DN Solutions LEO 1600 Year 2022 Fanuc i Plus control system 6-inch (170mm) chuck Spindle bore 45mm Travels: X-175mm Z-330mm Dcjdpsz R S T Isfx Ak Asp Max turning diameter 320mm Max turning length 303mm 12-tool turret MT4 tailstock Included with the machine: Chip conveyor with tank and pump Very good condition PDF specification file available

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, total height: 6,000 mm, total width: 2,200 mm, total length: 2,900 mm, load capacity per storage section: 430 kg, input voltage: 380 V, empty load weight: 3,000 kg, Brand Model Year Height × Width × Depth Shelves Load capacity: 430 kg KARDEX Shuttle 500-1850 × 813-NT 2000 6,000 mm × 2,200 mm × 2,900 mm 52 (1850mm x 813 mm) CPU C2000 Maintained by Kardex until April 2025. Dcedpfxs Afyxxj Ak Aop Dismantling scheduled for late November 2027, east of Rennes. Loading onto a semi-trailer (tautliner) is possible. Delivery of the dismantled machine is possible, including an electrical and mechanical identification plan + videos of the dismantling process for those who wish to reassemble it themselves. Alternatively, delivery and reassembly/start-up are possible anywhere in Europe with a maintenance contract. Reassembly is possible: NT models are no longer manufactured, so parts are becoming scarce. We can have it reassembled by our partner, who has the parts, and provide maintenance with a potentially equivalent user manual.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 30065320, functionality: fully functional, power: 14.71 kW (20.00 HP), pressing force: 50 t, stroke length: 500 mm, operating speed: 63 mm/s, reverse speed: 350 mm/s, table width: 500 mm, table length: 800 mm, throat depth: 250 mm, distance table to ram: 650 mm, oil tank capacity: 235 l, total length: 920 mm, total width: 1,420 mm, total height: 3,100 mm, Equipment: CE marking, documentation/manual, 50-ton swan-neck hydraulic press by Benedetti in excellent condition. Machine available for immediate sale and can be viewed at our workshop in Peschadoires, France. The press is equipped with a new electrical control panel and has a CE marking. A technical file will be provided with the machine. Please find attached photos of the press and the technical data sheet. Dodpfx Ake Ahxqvs Aocp Price upon request.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 22 kW (29.91 HP), pressing force: 250 t, stroke length: 300 mm, table width: 900 mm, table length: 1,790 mm, table height: 180 mm, distance table to ram: 540 mm, total length: 2,180 mm, total width: 2,560 mm, total height: 4,350 mm, overall weight: 28,000 kg, Equipment: CE marking, documentation/manual, The machine is complete and in excellent condition (see photos and technical specifications attached). It is available for sale immediately and is stored and can be viewed at our workshops in Peschadoires, France. A technical file will be provided with the press. Price upon request. Dcedj Ahxgdopfx Ak Asp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC vertical glass processing centre with waterjet Working direction: from left to right Max. glass size: 6000 x 3300 mm Min. glass size: 600 x 200 mm Glass thickness: 3 - 25 mm Max. grinding speed: 25 m/min Line consists of: - Vertical CNC glass working centre SYSTRON proHD 6033 (year: 2016), - High-pressure waterjet pump THYSSENKRUPP HPS 4037, - Vertical glass washing machine LISEC VHW-33/V8 (year: 2011). Types of processes: - Grinding (inner and outer contours), - Polishing (inner and outer contours), - Drilling/counter-sinking/milling (by waterjet), More technical information can be found attached as Tech. data file Very good and clean condition Good working order, still in production As is Available in December, 2026 Djdoz Syvxepfx Ak Ascp

Condition: ready for operation (used), The conveyor belt of the company Engel is for sale Dcjdsm E I Rlepfx Ak Aep Length : 3000mm Useful width : 400mm Höhenverstellbar: 1000mm-1250mm 2 swivel castors with brake 2 locking casters