Used Roles Paternoster for sale (291)

Condition: new, Year of construction: 2025, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. Dcjdpfeff Huwox Agcjr • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, operating hours: 30,629 h, laser power: 4,000 W, travel distance X-axis: 3,070 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 200 mm, product height (max.): 20 mm, Laser cutting machine including paternoster! Machine serviced by manufacturer in 2023! LASER CUTTING MACHINE TECHNICAL DETAILS Laser Laser power: 4,000 W Peak power: 500 W Laser source: FANUC AF 4000 E Principle: c2-laser (AC-HF) Laser wavelength: 10.6 µm Laser stability: +/- 1 % Laser consumption: approx. 10 l/h Travel Range and Cutting Parameters X-axis travel: 3,070 mm Y-axis travel: 1,550 mm Z-axis travel: 200 mm Table load: 850 kg Material thickness (mild steel ST 1203): 20 mm Cutting speed: 0 to 20 m/min X-axis travel speed: 80 m/min Y-axis travel speed: 80 m/min Simultaneous axis: 113 m/min Z-axis travel speed: 60 m/min Control system: GE Fanuc Series 160 I-LW MACHINE DETAILS Operating hours: 30,629 h Dimensions & Weight Dimensions: 8,000 x 3,400 x 2,400 mm Weight: 16,000 kg EQUIPMENT Documentation/manual Cooling unit Safety light barrier Dry separator Keller L-CUT Transformer RIEDEL PC 315.21-ME LAS PATERNOSTER TECHNICAL DETAILS Maximum sheet weight: 3,000 kg Sheet thickness: 1 to 20 mm Maximum sheet size: 3,000 x 1,500 mm Minimum sheet size: 150 x 150 mm Lifting traverse load capacity: 3,000 kg Dcjdpfx Agoxc E Dqjcer MACHINE DETAILS Dimensions & Weight Dimensions: approx. 6,400 x 5,000 x 8,000 mm Weight: approx. 8,000 kg EQUIPMENT Loading bay Unloading platform Lifting traverse Pallet changer Vacuum traverse

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total height: 4,100 mm, total width: 3,420 mm, total length: 1,765 mm, load capacity per storage section: 244 kg, type of input current: AC, input voltage: 400 V, input frequency: 50 Hz, input current: 8 A, Vertical carousel (lift system) for storage and retrieval of goods. Hänel Rotomat systems operate on the principle of a circulating shelf system (“paternoster”) and enable space-saving, ergonomic material handling. Dcedpfxjx Aqcfs Agcsr

Condition: reconditioned (used), Modernized machine with new LTG StoreControl P control system Dedednfdlepfx Agcscr External dimensions: Height 5000 mm Width 2650 mm Depth 1250 mm plus 300 mm storage table 34 carriers with a payload of 140 kg each with clear usable dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch 254 mm Storage table at 1000 mm above floor level with wooden worktop Color: GRAY, surfaces cleaned, signs of wear may occur Motor power: 1 x 1.8 kW / 400 volts Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Condition: excellent (used), Fast paternoster stacking system for pallet boards. With slat magazines. With package outfeed. Already dismantled. More details upon request. Sale by customer order. Dedpfx Agexz R Ufscecr

Condition: used, Features: Condition: fully functional, with traces of use. Ideal for fast material transport Expertly disassembled and packaged Dcsdpemxf Uvefx Agcjr Manufacturer: Budde Condition: used drive type: motorized -king shaft total length outside: ca. 1500 mm total length inside: ca. 1850 mm total width incl. motor: ca. 900 mm total width without motor: ca. 560 mm conveying width: approx. 540 mm Material: steel, plastic Color: light gray Including feet (height adjustable) and motor gear (north 0.55 KW) Discharger/ Infeed/ Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under heavy load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Condition: new, Year of construction: 2026, Customized paternoster stacking systems in different technical designs for sawn timber lengths from 3.0 - 6.0 m ( length on request ) options: - with/without lath bundling (different versions depending on requirements) - with/without slat magazine single or double chamber depending on requirements with pneumatic gripper Dsdper Nx Tmofx Agcocr - Infeed and outfeed according to customer requirements

Condition: used, 86 sets available (2 pcs. per set)different sizesmore information under "Download" Dsdpfx Aodc A Saegcocr

Year of construction: 1996, condition: good (used), For sale we offer a used Kardex/Paternoster. technical features: Length 3.400mm width incl. tray 1.960mm width without tray 1.650mm Height: 6.200mm Compartments: Length: 2.950mm Dcsdpfxokuyk Ao Agcor Width: 620mm Height: 110mm If you are interested, please contact us.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system External dimensions: Height 6,010 mm Width 3,501 mm Depth 1,774 mm 25 carriers with a payload of 628 kg each Dcjdpfx Agjhfxkascer In the clear usable dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Storage table at 1,000 mm above floor level with worktop / plastic surface Light gray color, surface cleaned, signs of wear possible Motor power: 1 x 5.5 kW / 400 volts Other extras: Automatic chain tensioning, Various intermediate shelves Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. Dedpsup R U Usfx Agcscr The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: good (used), functionality: fully functional, Due to cessation of operations at the Norderstedt site, for sale as-is, not loaded. Kugler Paternoster punching machine, suitable for Wire-O and index tabs Format 50 x 50 cm Includes 2 punching tools Dsdpforn R Rfex Agcscr Final price reduction!!!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Weinig paternoster stacker build/rebuild 1989 / 2025 New SEW Motors. New control system. New bearings. New airpipes. Min length 1500mm Max length 6000mm Dedpsxdya Aefx Agcocr Speed up to 4-5 layers pr min

Condition: good (used), Stacking boxes, stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers, storage boxes, shelf boxes -6620x Storage bins: various sizes -771x storage bins Dimensions: 550/174/H110 mm -3483x Storage bins Dimensions: 175/135/H110 mm -2112x storage bins Dimensions: 275/175/H110 mm -30x storage boxes dimensions: 138/86/H110 mm -172x storage bins Dimensions: 174/136/H96 mm -56x storage boxes dimensions: 274/174/H96 mm Djdpfxsdqc Hwe Agcocr -Sale: only complete

Condition: ready for operation (used), Year of construction: 1991, A roll paternoster ESKA storage and loading system is available. Roll width: 1600mm, max. load capacity: 2800kg, total height: 4300mm. Documentation available. An on-site inspection is possible. Djdpjw I E Dcjfx Agcocr

Condition: good (used), Year of construction: 1990, Kardex vertical carousel shelving Type: Kardex Device no.: not legible Year: 1990 Device height: approx. 5,920 mm Device width: approx. 3,010 mm Device depth: approx. 1,250 mm + 300 mm tabletop Number of trays: 40 Tray width: approx. 2,500 mm Tray depth: approx. 400 mm Tray height: approx. 235 mm Dcsdpfsw E Hh Eox Agcsr Compartment load: 250 kg Total load: 10,000 kg Color: White

Condition: good (used), Year of construction: 2014, Manufacturer: Hänel Type: Lean Lift Year of manufacture 2014 Device dimensions: Djdpfx Aovt Euzegcocr H 6302mm approx. W 2805 mm D 2810 mm Shelf 40 pieces up to 400kg per container H 57mm D 825mm W 2460mm Total load: 40,000kg (2×20,000kg)

Condition: like new (used), Year of construction: 2022, operating hours: 500 h, functionality: fully functional, Drying paternoster for finger-jointed boards Consisting of: - Transfer chain to finger-jointing press (foldable) - Drying paternoster (approx. 7 m, board length up to 6 m) - Cutting and zero-cutting saw - Conveyor belt for waste wood disposal - Stacking machine - Strip magazine not for sale Dsdpswclkyjfx Agcscr - Package cross conveyor The machine is in very good condition and has had very little use. The machine is still assembled but available immediately.

Condition: good (used), In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage brushing machines, and membrane on machineseeker! Paternoster For the membran press membrane press FOILS-STORAGE-PATERNOSTER Dcjdpfx Asbgdv Iogcjr for the foil-roles stock and at the membrane press Technical Description: Height of the paternoster 3800mm Max. foil width 1600mm Max. foil diameter 500mm 12pcs bearing rods Size of the paternoster 1000x2370x3800mm Inclusive foil transporter (trolly) Drive capacity 1,5 kW Total upload 4080 kg at a max. rolls weight of 340 kg Tools weight incl. Up weight- 5240 kg Specific ground-load capacity (1,89 to/m²) Pod-inside-diameter max. 90mm, bearing rods diameter 42,4 mm Side panels - total all over the overall height Protection lattice from 2,2 metres over the floor to the over edge overall-height Load chain as a hollow-bolt chain Fraction strength 100 kN, division 50mm = bearing rods-hanger system raster Rotation speed ca. 5,5 m/min Control with a key-switch with return (TOTMANN) for switch on/off Nominal voltage 400 V; 3N; 50 Hz mains (net) connection-pipe with CEKON-plug 16A Mains (net) fuse (construction sided)- 10A inert NO Price on request

Year of construction: 2012, condition: good (used), Type: IND-PA Dodpfx Aohyhlgegcscr Device no.: 0/1220744/1 Year: 2012 unit height: approx. 5600 mm unit width: approx. 2870 mm unit depth: approx. 4000 mm number of rolls: 45 Roll width: approx. 2370 mm shelf load: 200 kg Total load: 9000 kg Color: beige

Condition: good (used), Year of construction: 2003, Kardex carousel Type: SYS-120-1414 Device no.: 03001086/001 Year of manufacture: 2003 Rack height: approx. 3110 mm Unit width: approx. 2950 mm Unit depth: approx. 1150 mm + 300 mm table top Number of shelves: 14 with 7 additional drawers Shelf width: approx. 2630 mm Shelf depth: approx. 320 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1400 kg Dcedpfx Asq I R D Nsgcjr Color: white

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg superstructure see photo 3000 mm Color: beige Dcjdpfx Agshyhlkscor

Condition: good (used), Year of construction: 1990, Megamat carousel rack Type: 112-350-13 Device number: 7479 Year of manufacture: 1990 Device height: approx. 2950 mm Device width: approx. 2675 mm Device depth: approx. 1130 mm + 280 mm table top Number of shelves: 13 Shelf width: approx. 2160 mm Shelf depth: approx. 295 mm Shelf height: approx. 330 mm Shelf load: 100 kg Total load: 1,300 kg Dcsdpov Ewn Djfx Agcer Color: beige

Year of construction: 2021, condition: used, We are selling our chemical nickel work tank. The tank is made of acid-resistant stainless steel and electropolished on the inside. Sager and Mack pump and filter. Munk Protektostat Frequency converter for pump Heater with control and timer. From 10-93°C, approximately 1 hour 30 minutes. The internal dimensions are: L1200 x W600 x H950. The fill height is 880 mm, which corresponds to a volume of approximately 635 liters. Installation dimensions: L2100 x W900 Total connected load approximately 50A Dcjdpeqzgb Ssfx Agcor If required, we can also create a customized solution for you.

Condition: new, functionality: fully functional, Equipment: safety light barrier, Replacement controller for storage lifts and paternoster systems. With our "LTG StoreControl LL and StoreControl P" control systems, we are able to modernize paternosters and lifts that have a defective Cedes Safe C200 or Safe C400, for example, and keep them operational for many years to come. Our control systems fit storage systems of all manufacturers and types. Dcjdpjq Rcmtsfx Agcjr The storage systems can remain fully loaded for the conversion. We can also provide special solutions as well as software connections.