Used Roles Paternoster for sale (270)

Condition: good (used), Year of construction: 2007, Lift System, Megamat FSE 7.1, approx. 6.91m high, min. 331kg per tray, Tray size: approx. 3.06m x 81cm – used - : Price ex location: €18,500 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Model: FSE 7.1 3060/816-6910 Crodpfx Asx Rzb Dsb Usa Serial number: 500002536 Year of manufacture: 2008 Permissible total load: 70,000kg Load capacity per tray: min. 331kg (possibly 414kg or 536kg, depending on which type of tray is installed; this cannot be clarified in advance). Number of trays: approx. 50 pieces Tray size: 3060 x 816mm Equipment dimensions: Width: pending (should be approx. 3,450mm) Depth: pending (should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, rated operating current 17.8A, mains fuse: 25A Condition: good Available: approx. end of May / beginning of June 2026 Location: 09337 Hohenstein-Ernstthal

Condition: new, Year of construction: 2025, Motorized thickness table hub with two speeds Numerical display for working height Thicknessing table in cast iron Cjdjd Hx E Iopfx Ab Uora The thicknessing table is supported by four large trapezoidal thread spindles for maximum stability and precision Four speeds Optional with two roles in the thicknessing table Equipped with noise and chip protection curtain at the factory Tueckein and outlet Adjustable roll pressure Front feed roller with helical gearing Pull-out roller with rubber coating Powerful industrial motor Equipment details Models TERSA with Tersa Planer knife shaft Planer blades change in seconds When starting the machine, the blades are automatically tensioned - self-arretierend by the centrifugal force The knife protrusion will automatically without the use of setting gauges Work table The working table is supported by four large trapezoidal screw spindles provide greatest stability under all operating conditions As standard with electric table adjustment The Special lifting device correctly maintain the table position, also without lock Helical steel feed rollers for a constant and uniform wood feeding Second, rubber feed roller in the spout Massive arrestors prevent kickback of workpieces A 4-meter shaft ensures an optimal planing image Dimensions and weights Length approx. 1170 mm Width/depth approx. 1003 mm Weight approx. 660 kg Connect dust extraction

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, coil weight: 15,000 kg, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, inner diameter: 508 mm, sheet thickness (max.): 4 mm, outer diameter: 1,800 mm, coil width: 1,600 mm, number of blades: 4, type of input current: three-phase, warranty duration: 12 months, straightening roller diameter: 75 mm, load capacity: 15,000 kg, space requirement width: 3,500 mm, space requirement length: 12,000 mm, space requirement height: 3,500 mm, feed roller diameter: 250 mm, number of feed rollers: 2, CTL Demaq Evo. New, stock. Coil up to 15 Tons D1800, 20-24" Nominal. Coil Cart hydraulic. 2 pinch-role of feeder and 11 straight rolls. Hardened and chromed. Servo Nidec in straightener and decoiler. 4 longitudinal knifes, axis (HC) 230 mm, knifes 300 mm. Transversal shear. Full made in Spain in our facilities. Optional other devices and configurations. The most advanced Demaq SPL machine. Cjdpfeu Ey D Sjx Ab Uera 2 units available.

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Crjdow Dd Igjpfx Ab Uea Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: good (used), Keyence XG-7501P multi camera image processing system control controller XG7501P Cjdpfx Aboib Dnco Usra Manufacturer: Keyence Manufacturer Number: XG-7501P Type: multi-camera image processing system, control unit Side cover included Country of manufacture: Japan Item condition: This item comes from a business liquidation of one of the largest auto parts suppliers in Germany and was stored there in paternosters, so some original packaging is missing and some items have storage marks.

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. Codpfx Abogm Hwuo Uera The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, air flow: 11.4 m3/min /684 m3/h Crjdpfx Abew Rcgtj Uja Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2010, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 56 shelves, this results in a total storage area of ​​197.68 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 28,000 kg for all 56 shelves. Manufacturer: Modula Year of manufacture: 2010 Model: Modula Lift ML 50D Height: 6900 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 56 Can be shortened to 4900 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Product video 2 Datasheet: see Documents tab Credpfx Abjx E Aple Uja Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new And used items – find them in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2013, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 58 shelves, this results in a total storage area of ​​204.74 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 29,000 kg for all 58 shelves. Manufacturer: Modula Year of manufacture: 2013 Model: Modula Lift ML 50D Height: 7350 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 70000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 58 Can be shortened to 4700 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Crjdox Ezxlspfx Ab Uoa Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, Modula Lift ML50D Storage Lift Modula systems are automated vertical beam storage systems based on the concept of vertical storage and space saving. They can store any type of material safely, cleanly, and efficiently, saving up to 90% of floor space. Modula systems are the result of over 30 years of experience from an Italian company specializing in high-tech products. • Minimal energy consumption • Automatic weight monitoring during beam insertion • Dynamic beam positioning within the unit according to the stored material height • Unit frame made of galvanized steel profiles • Vertical drive with steel-core reinforced Eagle toothed belts • Extractor guide system with 6 HDPE rollers per side • Beam management with differentiated load capacity The storage lift has been regularly serviced by the manufacturer and is in excellent condition. The shelves are 4100 mm wide and 860 mm deep, providing a storage area of ​​3.53 m² per shelf. With 60 shelves, this results in a total storage area of ​​211.80 m². The load capacity per shelf is 500 kg, resulting in a total capacity of 30,000 kg for all 60 shelves. Manufacturer: Modula Year of manufacture: 2021 Model: Modula Lift ML 50D Height: 6700 mm Carrier width: 4100 mm Carrier depth: 857 mm Carrier height: 120 mm Net carrier payload: 500 kg Gross total payload: 80000 kg Device dimensions: Internal unloading (W x D) 4517 x 3165 mm Device dimensions: External unloading (W x D) 4517 x 4058 mm Operator interface: Console with 10.4” touchscreen technology (Copilot) Throughput: Up to 120 carriers/hour (depending on configuration) Height increments: 200 mm Storage grid: 25 mm Number of trays: 60 Crsdpox Ey Avjfx Ab Uja Can be shortened to 4700 mm Dismantling costs of over €6000 already included Item location: 37308 Geisleden Product video Product video 2 Datasheet: see Documents tab Financing through our bank is also possible. komplett-konzept.leasingo.de More items - new And used items – find them in our shop! International shipping costs on request!

Year of construction: 2008, condition: excellent (used), LBL Brenta Canter CT 700 Max cutting depth = 150mm. Max cutting height = 650mm 9 knife Head and main piece of cast iron Free Middle plate, overheating protection Free space = 800 mm Fast, precise positioning by brushless motor with additional role for forward and reverse cutting Cjded Imuzepfx Ab Ujra

Condition: used, Roller Moehringer / Braun Canali Csdpfsdffnhox Ab Usra Roll Coat length 1400 mm Role distance 700 mm Length ca. 11000mm

Condition: used, For Sale: LK Measuring Table, Granite Length: 3500 mm Width: 2100 mm Thickness: 500 mm Weight: approx. 10,000 kg Including: air bearings Price for the LK measuring table: €4,500 Delivery Conditions: Lead time: ex stock, subject to prior sale Delivery: ex Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV cannot be held liable for discrepancies between the technical specifications in this offer and the actual machine, accessories, and parts. Machines, accessories, and parts are purchased as seen and known by the buyer. We do not provide any warranty on used machines, accessories, or parts. All our quotations, orders, and agreements are subject to the "METAALUNIE TERMS AND CONDITIONS," filed with the Registry of the District Court of Rotterdam in the latest text as deposited there. These terms and conditions will be sent to you upon request. Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry, as well as used paternoster systems from manufacturers such as Kardex, Hanel/Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems like Kardex Shuttle XP and XPlus. Credpfsgbd Rtox Ab Uoa Machinehandel De Leeuw BV Oordeelsestraat 7b 5111 PA Baarle-Nassau The Netherlands

Condition: excellent (used), Year of construction: 2019, We can now offer one Vertical Lift Modules from SSI Schaefer of the latest model. SSI Schaefer is the world's leading manufacturer of warehouse automation and their model of vertical storage lifts Logimat SSL is just like their other solutions, of the highest quality and standard. These vertical lift is configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Module is each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. Available for immidiate delivery. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Csdpfxondcbcj Ab Ujra Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Codpjxqmrfsfx Ab Uora Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, laser type: fiber laser, Model 2022 for Industry 4.0! Laser marking machine for: = ᐳ Mark = ᐳ tempering of metals = ᐳ labeling of many materials = ᐳ deep engraving Extremely detailed and high-contrast engravings thanks to the JPT-MOPA system fiber laser source (var.pulse width on request) Simple operation and handling! Iayabahok Our Exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect starting engravings) • "New Generation ECO" scanner unit • 19 "PC control, no external card! • very large viewing window with certified laser safety glass • Scan area approx. 150 x 150 mm • electrical height adjustment • Full housing with 4 roles • Mark "weightless" lift gate for safe. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from an Excel file • Laser parameter finder per matrix over 2 parameters • TCP IP connectivity for external components • Industry 4.0 can be processed at any time using the TCP / IP protocol. • Inputs and outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis machining • Performance increase of up to 50% through 64bit • Improved stability through integrated control card • Optional up to 4 axis controls (integrated) • Optional DEEP engraving with Z axis • More powerful algorithms for fast hatching. • Completely redesigned galvo generation • 2-fold laser pointer for checking the focus position. • LED lighting of the marking area • Connection possibility for external suction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • protective housing acc. Laser class 1 • incl. 4 hours of training in our training center (max. 2 people) Do you need individuality? With pleasure. Choose from our numerous accessories: = ᐳ Camera systems for object detection = ᐳ Fiber laser source in almost all variations = ᐳ motorized and automatic height adjustment Credpfx Aod S I Smeb Uoa = ᐳ Scanlab equipment = ᐳ Automation for assembly = ᐳ conveyor belts for inlet and outlet = ᐳ 3D marking and GRAVIER function. = ᐳ automatic focus adjustment = ᐳ turntable = ᐳ motorized sledge = ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers of course allow individual wishes in terms of design and size! = ᐳ Made in Schweinfurt! Images can contain options! Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser Laser engraving machine, laser marker, laser marking, laser marking, laser engraving, laser engraver, laser marking, laser marking, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, laser marking system, marking laser, marking laser, marking laser, marking laser

Condition: like new (used), Year of construction: 2021, 1 machine sold, 3 remaining We are now offering four Vertical Lift Modules from SSI Schäfer, manufactured in 2021. The machines have been serviced by the manufacturer since installation and are therefore in excellent condition. Each unit is 2,335 mm wide and 2,712 mm deep, requiring only 6.33 m² of floor space. This makes them ideal for companies that need efficient, organized storage but have limited floor space. The Vertical Lift Modules are designed with two access openings — one at the front and one at the rear — allowing for easier and more flexible loading and picking. This configuration enables various processes, such as picking and loading, to take place simultaneously without interference. If required, one of the access openings can be closed off. Codoxwnzhepfx Ab Uera Each machine is equipped with the optional LogiPointer, a light pointer that precisely indicates where each item should be retrieved. This reduces picking errors and increases operational efficiency. Please note: To use the LogiPointer, the unit must be connected to an ERP or a warehouse management system (WMS). Machine Specifications: Manufacturer: SSI Schäfer Year of Manufacture: 2021 Model: Logimat 1825-625-7950/220 Height: 7,950 mm Width (Machine / Tray): 2,335 mm / 1,825 mm Depth (Machine / Tray): 2,712 mm / 625 mm Number of Trays: Approx. 31 trays per Vertical Lift Module Maximum Tray Load: 220 kg Power Supply: 3/N/PE 400V, 25A

Condition: excellent (used), Year of construction: 2019, For sale: 2 Kardex Megamat RS 350 vertical carousels in excellent condition. These machines have been meticulously maintained with annual servicing and have only been operated in a clean, light-duty environment. Csdevgdkbspfx Ab Usra The package comprises 2 units from 2017, available in two height versions: 6,585 mm and 7,110 mm. Each vertical carousel is equipped with either 21 or 23 carriers, resulting in between 42 and 49 shelves per unit. A detailed overview of each shelf configuration is available on request. All carousels are fitted with the optional "Matrix Strip" LED guidance system at the access opening. This system laterally indicates the picking location and displays product information; however, full functionality requires ERP or WMS integration. Please note: the boxes shown in the photos are not included in the offer. Technical data: Manufacturer: Kardex Remstar Model: MEG RS 350.1.3050.6.533.21 / MEG RS 350.1.3050.6.533.23 Year of manufacture: 2 units from 2017 Height (carousel/carrier): 6,585 mm & 7,110 mm, with approx. 470 mm free storage height Width (carousel/carrier): 3,675 mm / 3,050 mm Depth (carousel/carrier): 1,671 mm / 628 mm Number of carriers/shelves: 21 or 23 carriers, 42–49 shelves Max. load per tray: 228–350 kg, depending on shelf configuration Supply voltage: 3/N/PE 400V For further information or inquiries, please do not hesitate to contact us.

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Cedsfg Tatopfx Ab Uora Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling Csdpfx Abox H Tile Uora After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Crjdpfx Abexxz Iws Uja Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: used, This listing is introducing 8 No Envair Mobile Isolators of different specifications currently held in our stock The units are in full working condition and ready for immediate use Envair Mobile Isolator Envair Technology is a UK-based manufacturer specializing in clean air and containment solutions for the healthcare, biotechnology, and pharmaceutical industries. Their product range includes a variety of isolators designed to provide controlled environments for handling hazardous substances, ensuring both operator and product safety. Applications Envair isolators are widely used in a variety of applications including Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage developmen Key Features of Envair Isolators Positive and Negative Pressure Models: Envair offers both positive pressure isolators protect the product from contamination and negative pressure isolators to protect the operator from hazardous substances Compliance with GMP Standards: Many Envair isolators meet EU GMP Grade A and ISO 5 classifications, ensuring sterile, controlled environments. Customizable Designs: Envair provides bespoke solutions tailored to specific client needs, including unique dimensions and technical requirements. Advanced Containment Technology: Isolators are equipped with automated pressure decay leak tests, electromagnetic interlocks for transfer chambers, and integrated decontamination systems. User-Friendly Controls: Most units include intuitive touchscreen interfaces and PLC-based systems for simple and efficient operation. Growing Need for Containment with HPAPIs Demand for personalised medicines containing High Potent Active Pharmaceutical Ingredients (HPAPIs)—particularly in newer super-potent oncology, cardiovascular, and diabetes treatments—is increasing rapidly. These medicines often require shorter turnaround times, forcing pharmaceutical process manufacturers to develop faster, more agile workflows. In such high-risk, high-value settings, a GMP-compliant environment is not optional—it’s critical. It’s easy to overlook the fact that the people developing, manufacturing, and dispensing these complex drugs are at risk of exposure to harmful, sometimes lethal, compounds. Their safety is paramount, given the essential role they play in maintaining a reliable supply of advanced therapeutics. Expertise in HPAPI Handling for CMOs & CDMOs Cedpfx Abjxv Dhbe Usra Envair has specialist expertise in helping Contract Manufacturing Organisations (CMOs) and Contract Development and Manufacturing Organisations (CDMOs) safely handle HPAPIs—even within existing non-contained facilities. Their isolator systems are designed, manufactured, and installed to meet rigorous containment performance levels below 1μg/m³ (OEB 5). Each system is custom-engineered for the specific site and process step—whether it’s weighing, mixing, milling, spray drying, or packaging. Applications Hospital Pharmacies: For preparation of TPN, CIVAS, and aseptic dispensing. Pharmaceutical Laboratories: Handling of HPAPIs and sterile compounding. Sterility Testing: Secure, controlled environments for product testing. R&D Facilities: Safe containment during experimental or early-stage development

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Codjrwxz Rspfx Ab Uera Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Crsdpfxehvmkij Ab Uoa Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: new, Year of construction: 2025, functionality: fully functional, Sherpa TUG is an autonomous electric tug that moves trolley payloads of up to 1000 kg. (Higher capacities planned) Trolleys play a key role in material handling in most factories and many warehouses. Sherpa TUG can be easily integrated into existing trolleys and thus fits seamlessly into workflows. Dimensions 1395 x 640 x 1096 mm Weight 260 kg Sensors 3D lidar and camera IPX rating IPX4 Ground clearance 100 mm Required aisle width >1500 mm Maximum speed 1.5 m/s Codpevur Uwefx Ab Uera Turning radius 1.5 m Gradient up to 2% Trolley train with up to 3 trolleys Temperature +5 to +45 C⁰ Battery type 48V NMC lithium-ion (replaceable) Weight 15 kg Running time 8 hours Charging time 2 hours Capacity 36Ah Automated solutions Automatic coupling/uncoupling ERP integration for obstacle avoidance Traction monitoring, customer-specific trailer coupling Individual trolley design