Used Run Winch for sale (7,829)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. In February 2024, the upper WILA tool clamping system was serviced. Dwjdpfxex N Ibhj Apwoa The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.

Condition: used, IDC000109 - Obel Pedersen RF feed band press type T20V Dwjdpfsvgddhex Apwoa - Press length 2500 mm width 600 mm - HF generator T20 V and water cooling

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, 85 t x 2500 mm Weight: 9000 kg (without tools) Between columns: 2050 mm Service: In 10/2023, the pump was replaced by TRUMPF at a cost of EUR 10,000. Since then, the machine has operated approximately 200 machine hours. Dwjdpfxeyxri Io Apwja

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T Dwodpfxsylt Ukj Apwsa - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22499562/0001, volume flow: 200 m³/h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 11 A, type of input current: AC, type of cooling: air, rotational speed (max.): 1,450 rpm, protection type (IP code): IP55, Wilo - 2120809 - Standard single dry-running pump IL 150/190-5.5/4, DN150, 3x400V, 5.5kW Dwjdpfxjynxi Ej Apwsa

Year of construction: 2015, condition: good (used), High-speed door For production use. Dodsh Hbqijpfx Apwowa The door is in good condition except for minor cosmetic imperfections. Year of manufacture approx. 2015 Length approx. 4.5 meters Width 3.3 meters

Condition: new, Delivery time: approx. 10 - 15 working days (from external warehouse) The scope of delivery includes: 1x deep-profile frame, new with anti-slip safety feature Dodpfx Aeztbtpopwowa Material color: Sendzimir galvanized for shelf depth: 1,100 mm overall depth: 1,200 mm overall width: 850 mm support angle: 1,200 x 100 x 50 mm cross brace: 850 x 35 x 35 mm material thickness: approx. 3 mm weight/piece: approx. 12.00 kg Note: The deep-profile frame and the integrated anti-slip safety feature prevent the storage unit from slipping when containers, grid boxes, and pallets are stored laterally and longitudinally. They also serve to stabilize the pallet storage in the racking system.

Condition: used, Brüninghaus F20-E strapping device. Dwedpozrx R Nefx Apwsa

Condition: good (used), Permanent circular magnet with star-pole arrangement Technical data: Diameter: 350 mm Central through-hole diameter: 40 mm Features: Flange with Camlock fitting, size 6, diameter: 315 mm Condition: good, technically inspected Dwodpfx Aszrgy Sjpwsa

Condition: used, This listing is for a Eppendorf New Brunswick Innova 2300 Benchtop Open Air Shaker Dodpfxsxzg Izs Apwewa For shaking in ambient conditions. On the bench, in an incubator or in a warm or cold room, the Innova® Platform Shakers are the instrument of choice. Six ruggedly-built models provide reliable, continuous-duty shaking of test tubes and flasks to 6 liters. Low-profile shakers with Triple-Eccentric Drive for uniform motion and microprocessor controls for accurate regulation of shaking speed, 25-500 rpm (less with baffled flasks). Less than 6 inches tall to enable use of multiple shakers in an incubator or environmental chamber. Includes audible and visual alarms, timer (0-99.9 hours) with continuous operation or automatic shut-off at the end of the study.

Condition: used, Year of construction: 1977, Manufacturer: BOSCH – STRUNCK Model : FKL A 06 Year: 1977 Type: Automatic filler Dwodox R Diwspfx Apwea Plunging filling heads Filling pumps per set: 6 units 1 group of pumps up to 100 ml 1 group of pumps up to 200 ml Piston stroke adjustment: mechanical Motor power: 0.37 kW Laminar flow Filling head storage system withclosed circuit for cleaning. Machine dimensions: 100 x 80 x 245 cm Video in running condition available

Condition: excellent (used), functionality: fully functional, Long-hole drilling machine from C.W. Kreher, Olbernhau, type LBFM in very good condition can be used to mill long holes and drill dowel holes 380V, 1500W rotates clockwise the motor is new mills and drills very well and cleanly Dedpfsztl Idjx Apwjwa with 2 speed ranges that can be easily and quickly changed by simply adjusting the V-belt everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220 euros, so you have no risk when purchasing ideal for the production of furniture, doors, stairs and similar items because the drilling machine also allows very slow speeds, the drill bits have a long service life, and they do not overheat even when drilling hardwood, which is a major advantage, especially with larger diameters table size 500 x 280mm weight approx. 400kg max. workpiece height 160mm professional equipment, not cheap hardware store junk with 2 adjustable stops, left and right in front of the table; in addition, 2 angle stops can be attached to the table on the right and left, although these are not included in the scope of delivery, they can be easily built yourself with 2 steplessly adjustable depth stops that can be quickly and precisely adjusted using a scale you can start working with the machine immediately the max. lateral travel of the table is 230mm the max. drill stroke is 200mm (max. drilling depth 200mm) with 3-jaw drill chuck up to 16mm the table can be adjusted in depth by approx. 100mm and in height from 0-200mm, with locking screws and a display scale the machine table can be swivelled to the left and right up to 30° very stable, robust and durable construction all guides move smoothly; they are dovetail guides that can be adjusted the lateral travel of the machine table is smooth; the table slides on 4 ball bearings, which are eccentrically mounted and can be adjusted very well and precisely the workpiece is clamped using a toggle lever, which is simple and effective the drilling machine can be used to easily produce normal long holes and dowel joints; with the swivelling table, you can also drill angled holes in handrails and stair stringers the various speed ranges and all the adjustment options make the machine unique; you will not find this on any other long-hole drilling machine.

Condition: new, functionality: fully functional, empty load weight: 3,200 kg, lifting height: 3,270 mm, Year of construction: 2026, operating hours: 1 h, load capacity: 800 kg, machine/vehicle number: 250815, The machine is new and unused! TECHNICAL DETAILS Dwsdpfx Aezr D Uyepwea Lifting height: 3,270 mm Load capacity: 800 kg Bucket capacity: 0.38 m³ MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,706 x 1,570 x 2,480 mm Weight: 3,200 kg Tire size: 31 × 15.5 × 15 Engine manufacturer: Changchai Engine type: ZN390BT-25G Engine power: 18.4 kW Number of cylinders: 3 Fuel type: Diesel Emission standard: Euro 5 Fuel tank: 70 l Recorded operating hours: 1 h EQUIPMENT Quick coupler Lifting lock Cabin with heating Digging bucket with teeth Fabric seat CE certification

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Dsdpfx Aey Tuxzjpwowa This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: new, 25-Meter SLP Pallet Racking System Spanning a total length of approximately 25 meters, the system comprises 9 bays, each with a clear bay width of 2,700 mm. This corresponds exactly to the standard width required to store three Euro pallets side-by-side. Special Rack Depth: The upright depth of 1,100 mm is the standard for longitudinal Euro pallet storage. Thanks to the extended upright depth of 1,700 mm and the use of deep grating decks (1,700 x 890 mm), this system is ideally suited for non-standard dimensions, transverse storage, or order picking operations. Capacity & Load Ratings: With 6 levels (including the floor level), the system accommodates a total of 162 pallets. The maximum bay load capacity of 3,000 kg allows for a heavy load of up to 1,000 kg per pallet. Dodszrlxmepfx Apwowa The maximum total bay load is 15,000 kg. Technical specifications at a glance: Manufacturer: SLP (Saar-Lager- und Profiltechnik) Type: SL25 Total length of rack run: approx. 25.15 meters (9 bays at 2,700 mm + upright width) Rack height: 7,150 mm Total rack depth: 1,700 mm (upright depth 1,100 mm + 600 mm upright extension) Clear bay width: 2,700 mm (perfect for 3 Euro pallets per level) Number of bays: 9 bays Number of storage levels: 6 levels (5 beam levels + floor level) Total pallet spaces: 162 spaces Max. bay load (per level): 3,000 kg (with evenly distributed load) Max. total bay load: 15,000 kg Scope of delivery: 10 x SLP pallet rack upright frames, blue, 7150 x 1100 mm 10 x SLP pallet rack upright frames, blue, 7150 x 600 mm 135 x Mesh deck panels, 1700 x 890 mm 42 x SLP pallet rack beams, orange, 2700 mm Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are professionally installed and meet all safety standards. As experts in warehouse technology, we offer a comprehensive, one-stop service: Assembly & Disassembly Whether for new installations, modifications, or warehouse decommissioning, we handle the professional assembly and dismantling of your systems: - Pallet racking (heavy-duty & standard) - Shelving units for small parts and archives - Mezzanine floors for optimal space utilization Racking Inspections (compliant with DIN EN 15635) Safety is a legal requirement. We conduct the mandatory annual expert inspection (in accordance with DGUV Rule 108-007): - Inspection for deformation and damage. - Checks of locking pins and load capacity signs. - Preparation of a legally compliant inspection report, including an inspection sticker. "A complete solution: We are happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de You can find additional items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on the film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / special equipment: • Stored programs for different cushion sizes • Program change is activated by pressing a button Dwsdjwulylspfx Apwsa • Cushions from 4 cm to 16 cm in length can be produced individually with a defined filling level • 10 programs are available for storing multiple parameters 22726ä

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Dwedpfxjzp Ipis Apwja Engine power: 11 kW

Condition: excellent (used), For sale: a Grundfos CRK2-260 AMA AUUV multi-stage vertical pump with a three-phase Grundfos MG 100LB2-28FT130-C motor. The unit is fully functional, tested, and ready for operation. Its technical condition is very good, with normal signs of wear and tear resulting from use. Pump specifications: Manufacturer: Grundfos Model: CRK2-260 AMA AUUV Pump power: 3.0 kW Power supply: 3-phase Frequency: 50 Hz Flow rate: 16–58 l/min Head: 107–225 m Motor specifications: Manufacturer: Grundfos Model: MG 100LB2-28FT130-C Power: 3.0 kW Power supply: 200–220 V Δ / 346–380 V Y (50 Hz) Rotational speed: 2880–2910 rpm Protection class: IP54 Insulation class: F Dwedszn N T Tepfx Apwja

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Dodpszn N Ausfx Apwewa Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: ready for operation (used), Year of construction: 2021, DELTA LC 400 / Year of manufacture 2021 / Rotary table grinding machine -CE marking -Year of manufacture 2021 -Magnetic table - rotary table 300mm -Max. grinding diameter 400mm -Distance column - grinding spindle axis approx. 315mm -Grinding height - magnet - grinding wheel approx. 215mm -Grinding spindle speed 2840 rpm -Fine feed 0.01mm -Lateral retraction device -Spindle motor approx. 3 KW -Dimensions of cup wheel 200x80x78mm -Machine enclosure -Coolant system -Documentation Dodpfx Apjzrpdmewowa Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / Weight approx. 800kg Subject to errors and omissions.

Condition: good (used), Grundfos PNSNA96513352 Centrifugal pump Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). see plate for full spec, 2 in stock Dsdpex R U E Aefx Apwjwa

Condition: used, Lathe chucks and holders (VDI 30/40/50) from PLN 5/piece on request Dwodpfx Apjy H Ezgewea

Condition: new, Carton erector Igluetech/Brunel Engineering Services RSE 4 units Dedpfovu Sriex Apwjwa Price per unit

Condition: excellent (used), Year of construction: 1997, Manufacturer: Brüninghaus Verpackungssysteme GmbH & Co. KG Year of manufacture: 1997 Dedpfxsyubh Dj Apwjwa Machine serial number: 1390542 Model: SKL-90

Condition: used, Year of construction: 1998, machine/vehicle number: 177054769, travel distance X-axis: 400 mm, travel distance Z-axis: 280 mm, spindle speed (max.): 3,000 rpm, turning diameter: 200 mm, feed rate X-axis: 30,000 m/min, feed rate Z-axis: 60,000 m/min, Weisser Univertor A-90L Dwodjzl R Ugepfx Apwoa 8-position tool turret, chip conveyor, Siemens Sinumeric control system, hydraulic unit.