Used Run Winch for sale (12,720)

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 20170259471, total length: 22,000 mm, total height: 2,000 mm, total width: 2,000 mm, control cabinet length: 2,400 mm, control cabinet width: 400 mm, warranty duration: 12 months, control cabinet height: 2,200 mm, year of last overhaul: 2025, Side Sealing Machine - Manufacturer: BVM Brunner GmbH & Co. KG - Machine type: Comtex 4G - Machine No.: 20170259471 - Year of manufacture: 2017 - BVM reference no.: 5947 - Voltage, Frequency: 3N 400V, 50Hz - Power specifications: P=18kW, I=26A, F=32AT - Condition: Fully refurbished with warranty Comtex 4G Shipping System: The BVM shipping system ‘Comtex 4G Shipping’ is the complete solution for mailing various items directly to customers, including labeling. Delivery notes, invoices, and goods are packed together in a tightly sealed PE film bag, labeled with the address sticker, and handed directly over to the respective logistics partner. Technical data: - Seal width: 750 mm (transverse), 800 mm (longitudinal) - Product height: up to 250 mm - Capacity: Up to 25 cycles/min* (Special) features: - Special color - Signal control light with three colors to indicate error messages - Pneumatically operated buffer plate and presence control for the film waste tray, enabling tray change during automatic operation (no machine stoppage required). Note: At this station, the Comtex working height is limited to 850 +/- 10 mm. - Electronically controlled sealing bar drive (servo-driven, stepless speed adjustment) - Film end detection by ultrasonic sensor, incl. analog input card (one per film carrier) - Mechanical distribution device for film scrap strips in combination with a large film scrap storage - Individual wire numbering in the control cabinet of the packaging machine for Comtex 3G and 4G - Grooved aluminum profile covered with plastic profile - Bypass conveyor as folding belt integrated in the Comtex downstream of the side sealing station for transferring products out of the machine - Film folding device (no separate control) for converting flat film into center-folded film Guedpfxsw Ryt De Ad Doi - Film sealing device for flat films - PN/PN coupler (Profinet coupler) for establishing a Profinet connection - Software development for PN/PN coupling including release connection, interlock and combined fault message - Film end detection at the film mount and film level detection at the film unwinder, detected by photoelectric sensors, including three-color signal lamp and acoustic signal - Mounting preparation for labeler, suitable models on request, installed at the infeed including electrical and pneumatic connections - Sealing bar for producing a wide seal seam with separate cold knife cut, suitable for Comtex 3G, 4G and Compacta with EGS - Manual labeling device with linear motion (Model: Caljan Type: FPS BVM L113 L) - Reclosable film bag by means of double-sided adhesive tape in the film bag, incl. tear-off perforation wheel - Additional tear-off perforation wheel, allowing complete removal of the bag’s edge area - Stand-alone control cabinet for Comtex with 5 meter cable - Two sequentially mounted indexing belts (600 x 900 mm/600 x 14,000 mm) for Comtex 4G (total length 14,950 mm) with space for installation of a scanner or camera incl. trigger light curtain for scanner - Height adjustment of cross seal for pass-through height 220-250 mm - Cognex scanner system, consisting of: -- Scanner below the infeed for delivery notes -- 2 overhead scanners -- 1 overhead scanner for control +++ Fully refurbished equipment with 12-month warranty according to our attached warranty conditions +++

Year of construction: 2023, operating hours: 317 h, condition: used, functionality: fully functional, machine/vehicle number: ZN0012, EVERUN ER2500T – Telescopic Wheel Loader The ER2500T is a versatile 2.5-ton telescopic wheel loader designed for use in agriculture, construction, and material handling operations. It combines the benefits of a compact wheel loader with the extended reach provided by a telescopic boom, making it ideal for loading, stacking, and transporting materials in confined or demanding conditions. Key Features: - Rated Load Capacity: 2,500 kg (2.5 tons) - Engine Power: 53 kW (approx. 71 hp), available in Euro 3 / Euro 5 / EPA Tier 4 compliant versions - Bucket Capacity: 0.67 m³ (standard bucket) - Maximum Lifting Height: approx. 4.5 m (depending on attachment) - Dumping Reach: approx. 1.12 m - Operating Weight: approx. 5,300 kg - Dimensions (L × W × H): approx. 5,755 × 1,870 × 2,740 mm - Maximum Travel Speed: up to 21 km/h - Steering & Frame: articulated oscillating frame for enhanced maneuverability and stability on uneven terrain - Hydraulics: working pressure approx. 20 MPa, delivers fast response and efficient control - Quick Hitch System: hydraulic quick coupler compatible with a wide range of attachments (bucket, pallet forks, bale grabber, etc.) Gsdexg Nadjpfx Ad Deui

Condition: good (used), Year of construction: 2002, functionality: fully functional, Used Mailmaster, originally supplied by Nodema to the customer. The machine has been inspected by Nodema and is functional. Machine is supplied without the feeder. A video is available to demonstrate the machine in operation, or it can, of course, be viewed in Weesp. Godoxc Erzjpfx Ad Dsui

Condition: used, machine/vehicle number: xxxx, Ref. No. 18448 Technical Data: - 1 inclined tool holder frame - 1 extendable tool holder frame - 1 extendable drawer, W 900 x D 500 x H 70 mm - 1 extendable drawer, W 900 x D 500 x H 140 mm - Required space: W 1000 x D 500 x H 1950 mm - 26 pcs. SK 40 tool holders, some with mounted tools - 30 pcs. plastic inserts - various accessories for milling machines Gjdpfx Aswwifksd Deui - Cabinet is not lockable - Cabinet weight approx. 120 kg - Tool weight approx. 80 kg

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), Grundfos TPE 80-250/2 S-A-F-A-BQQE-MD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Q: 90 m3/h Guodpfx Astp A Stsd Dji H: 21,7 m P: 7,5 kW n: 2910 1/min Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. Guedpoxdu Tqefx Ad Doi - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: Gusdpfsxc T Nusx Ad Dsi The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Adjustable working pressure: approx. 6 bar Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Water-cooled, pneumatic spot welding tongs Dalex 3139 S2 + Dalex controller RS15 + Hyfra recirculating chiller / water cooling VWK7/1 Complete set including hose package approx. 10 m and spring balancer, without CRANE!!! Very good used condition, fully functional. Gjdpfx Adoxdvl Io Djui Item location: 75053 Gondelsheim See pictures Shipping via freight forwarder or pickup

Condition: ready for operation (used), Grundfos CR5-16A-A-A-V-HQQV vertical multistage centrifugal pump with MG90LC2-24FT115-H3 servomotor SN: DE6305.2Z.C4, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire for packing and shipping costs separately! Gusdpfsw Nmkmjx Ad Dsi

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Very well preserved drying chamber system with 2 x 5 individual chambers. Year of construction 1990 and 2000. 8 units made by Brunner and Hildebrand and 2 units WSAB. See photos for dimensions. Drying chambers can still be viewed in operation until the end of September. Easy to dismantle as completely bolted! Complete with Lignomat control system. Control cabinets and wiring. Guedpet H I R Ujfx Ad Dji

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well. Gedpfx Adetp A Shs Djui

Year of construction: 2008, condition: excellent (used), many pumps available, from 5m³/h to 500m³/h Gusdpjd H Nzzofx Ad Doi

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) Gjdjuif Iuspfx Ad Doui No sale to private individuals

Condition: used, Vertical multistage high pressure centrifugal pump GRUNDFOS. Pump as good as new, but a part of the magnetic coupling has been dismantled. Type CRN 10-09 MP-FGJ GI-V Year of manufacture approx. 2012 Delivery capacity at 7,2 bar: max. 10 m3/h Delivery head: max. 91.8 meters Mains connection: 400 Volt, 50 Hz Power: 3 kW - pump construction in 9 stages - made of stainless steel 1.4401 - the pump is as good as new, but there are several new pump chambers included - part of the magnetic coupling is missing suitable for drinking water supply, irrigation and drainage Packed in the original wooden box space requirement pump LxWxH 1100 x 250 x 300 mm Space requirement shipping box LxWxH 1400 x 330 x 340 mm Weight with shipping box 85 kg As good as new No submersible pump or submersible pump Gedpfsfupadex Ad Djui

Condition: like new (used), Year of construction: 1998, functionality: fully functional, SCHEER TW 4-2 Stair Stringer Milling Machine + Router HM 18E Everything is in excellent optical and technical condition, like new Fully functional The device comes from a hobby carpenter and has therefore seen very little use, still like new You can start working with it immediately All equipment is from year of manufacture 1998 All are professional-grade machines for commercial use—no DIY store junk SCHEER TW 4-2 Stair Stringer Milling Machine Allows you to mill steps and risers very precisely and accurately Curved joint surfaces can even be machined using the handwheel Equipped with hardened guide shafts, on which the cross support with router is mounted Features ball bearing guides, making the unit very easy, precise, and safe to operate Can be securely clamped to stringers with 2 quick-release clamps Cross support features 2 stops each for both longitudinal and transverse directions Includes 2 angle stops Includes manual Milling travel: 750 mm longitudinal, 75 mm transverse SCHEER HM 18E Router Very good condition, almost no signs of use Extremely robust thanks to the triple-bearing router spindle Excellent concentricity and flawless milling results Precise column guidance and torsion-resistant router table Constant speed even under high loads High-performance motor ensuring minimal fatigue Long service life due to soft start (full-wave electronics) Bearings are in good condition The machine is suitable for the toughest milling operations in continuous use Good visibility of the cutter shaft; chips are blown away by a powerful fan A wide range of accessories are available for grooving, rebating, dowelling, dovetailing, etc. Gujdoxbt Ubopfx Ad Doi 220V, 2000W Speed adjustable from 10,000 to 18,000 rpm Fully functional With M16 female spindle (adapters and other fittings can be ordered separately) Includes 30mm guide ring and extraction hood

Condition: good (used), Index HBFHydraulic pump and oil pump Rod loader Guedpfxed Tx A Tj Ad Dji

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. Gusdpfsupvtiex Ad Dji New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Features: Reliable, Sophisticated and Convenient Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1969, functionality: fully functional, 1A625 - lightweight screw-cutting lathe with increased processing diameter Ø 500 Gedpfx Adjwcbuzs Deui

Condition: good (used), Corner cutter Zhengrun FD-QJ80 Very good condition. This is a professional, production device for rounding corners. Solid cast iron construction, strong pressure ensure precision of operation. Replaceable knives. Gjdpfx Aovac Thsd Doui Adjustable margins. Stack height 80mm Weight 270kg Efficiency 85 cycles/min Power supply 400V The waste is directed outside the machine. This is the currently produced model.

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: Gusdpfx Asubb Ubed Dsi The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: excellent (used), Miter punch Gusdew Eua Nspfx Ad Dsi

Year of construction: 2004, condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power. Godpjkkcppofx Ad Dsui

Condition: used, 500 pcs. transport racks – post racks – box pallet racks used 🧰 Product features • Condition: used • Colour: galvanized • External dimensions: 135 x 116 x 24 cm Guedpfx Asvczw Djd Dji • Internal dimensions: 125 x 104 cm • Height incl. tubes: 200 cm • Tube diameter: 50 mm • Stackable: Yes 💰 Price €149.- net excl. VAT • Bulk discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Inspection and collection: Possible at any time by arrangement Always over 5,000 linear meters of pallet racks from various manufacturers in stock (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our T&Cs, all prices excl. VAT ex stock.)

Condition: good (used), High-quality air pad machine from a renowned manufacturer. Suitable for producing individually defined air-filled protective and filling elements made of PA and PE film as well as air cushions made of paper. Four air cushions are usually produced per work cycle. Various formats can be produced. 10 programs are available for storing several parameters. By calling up the corresponding program on the display, air cushions from 4 cm to 16 cm in length and with an individually defined degree of filling can be produced. The air cushion webs created in this way are wound into rolls using a motorized device. When the roll is full, the machine switches off automatically. The finished roll can then be removed manually and subsequently used as packaging material. Gusdokkcqqjpfx Ad Dsi The machine can be pushed using rollers and secured using brakes. The machine can be demonstrated with power.

Condition: ready for operation (used), Year of construction: 2004, Professional packaging machine of a renowned European manufacturer for tape width up to 50 mm. Maximum carton dimensions cirka: width 500 mm x height 500 mm; length unlimited... -No adjustments required for different carton formats. -Top and bottom closure on both sides. -Transport drive on the side. -Pressure for automatic width and height adjustment infinitely variable. Godsgvzrgjpfx Ad Doui -The working height of the machine is adjustable. -Capacity approx. 800 cartons per hour. -Transport speed approx. 20 m / min. -400 V / 50 Hz. The machine can be demonstrated under power.