Used Ryan Ga 30 for sale (29,745)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Kjdpfxswr Nnbe Ab Sedg

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 Kodpswvfyusfx Ab Ssdg -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Screw Compressor Manufacturer: Atlas Copco Model: GA30 VSD Year of manufacture: 2013 Kdsdpfxox U D Sme Ab Ssg Stepless speed control Operating hours: approx. 46,980 h Power: 30 kW Air flow: 5.58 m³/min Weight: 530 kg Max pressure: 13 bar

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Screw Compressor Kdedpfx Abex U D Rpo Sog Manufacturer: Atlas Copco Model: GA30 VSD+ Year of manufacture: 2014 Speed: steplessly controlled Operating hours: approx. 59,880 h Power: 30 kW Volume flow: 5.58 m³/min Weight: 380 kg Max pressure: 13 bar

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Kjdpfx Ajx Ih D Tjb Sedg

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min Kdedoum Hufspfx Ab Seg * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 798 mm, total length: 1,228 mm, total width: 478 mm, Tested forklift battery for your truck – 80V 3PZS 465 – special tray + 1 year warranty + incl. Aquamatik system + incl. end discharge devices & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,228 mm Width: 478 mm Height: 798 mm Weight: approx. 1,210 kg Suitable for the following models and others: Jungheinrich EKX 514 Jungheinrich ETX Jungheinrich ETX 514 Toyota FBM16 Toyota FBMF16 Ksdpfxswzvz Hs Ab Sodg Bradshaw T20 Dimos EFY3504R Heli CPD 30 All common battery sizes available, please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 80 V, total height: 627 mm, total length: 1,026 mm, total width: 996 mm, Tested forklift battery for your forklift - 80V 6PZS 750Ah - DIN A Kdsdpfx Abewzvxfs Sjg + 1-year warranty + incl. Aquamatik (automatic water filling system) + incl. end discharge connector & REMA 320 plug (other plug types can be installed as needed) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,026 mm Width 996 mm Height 627 mm Weight: approx. 1,730 kg Compatible with the following models and others: Toyota 7FBMF30 Toyota 7FBMF35 Crown TSP 6000-D Crown TSP 7000 Common battery sizes available, please inquire. Transport possible.

Condition: excellent (used), Year of construction: 2008, Weishaupt RGMS 30 dual fuel burner gas+heavy oil Output: 2600Kw Year: 2008 Viewing by telephone only! Kedpfx Absmnqbwj Sedg Preferred sale to dealers, traders or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: good (used), Approx. 30lfm shelf rack system Schaefer R3000 Manufacturer: Schaefer R3000 as good as new, see pictures. upright, galvanized, 2,5 m height, depth 60 cm Shelves, galvanized, 200 kg load/ shelf, shelf width approx.100 cm Negotiable price: € 3.290,00 net ex stock Offer consists of: 31 pcs. uprights or frames, height 2,5 m, galvanized Kdodpfx Asccxuijb Sjg 90 pcs. Shelves, 200 kg load per shelf, galvanized 10 pcs. cross bracing for stiffening 3 levels per field (of course more levels are possible against surcharge) Other combinations possible. Heights 2,3m, 2,5m or 3m available. Goods are in stock. Constantly more than 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly on request. Further information on request. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We look for, and/or offer constantly numerous articles from most diverse ranges. To get to our site, please click on our logo! broom-clean business evacuations company dissolutions Fast- flexible - ready to hit! We clear and dispose also for liquidators. Write us with some keywords, we will contact you immediately.

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with double pump -Hydraulic pumps: type IPC5-40 / IPC6-30 -Pressure: up to 250 bar Kodpfjp A A R Sox Ab Ssdg -Flow rate: /min -Engine: Loher KNGA250SB-04Z 75 kW -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg

Condition: used, empty load weight: 12,640 kg, maximum load weight: 28,360 kg, overall weight: 41,000 kg, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space length: 9,900 mm, loading space width: 2,550 mm, loading space height: 910 mm, loading space volume: 22 m³, suspension: air, tire size: 235/75 R 17.5, color: other, gearing type: other, front tire size: 235/75 R 17.5, driver cabin: other, emission class: none, Available immediately for rental periods of 4 weeks or more - Contact O. Schinke Kodpfx Absxwk Evs Sjdg o. Platform length 3,800 mm, loading length 9,400 mm, loading width 2,550 mm, ramp incline 1,300 mm, Rear loading ramps 2,950 x 1,700 x 900 mm ramp angle approx. 11 degrees, hydraulic ramp jack, ramp hydraulically movable, Grease aid, smart board, loading bed extension, Spare wheel holder, including spare wheel, storage box, 1 support at the front: telescopic support aluminum leg for uncoupling, 2 foldable support legs at the rear with spring holder, To operate the hydraulic components, a corresponding truck hydraulic system with forward and reverse air is required (not included in delivery) also available as a rental vehicle in the long term! Contact us - we will make you our individual offer.   * ABS * Steering knuckle on the 2nd and 3rd axle * Side impact protection * Rubber-metal pads on the loading ramps * Plastic tool box * Single lift axle * Platform side walls * Hydraulic ramp jack * Hydraulically movable ramps * Spare wheel holder * Rotating beacon * SAF axles * Smart board * Supports * Warning package * Central lubrication system We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee, subject to changes, prior sale or errors. We offer and strongly recommend an inspection and test so that the buyer does not have any false ideas about the condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   We take care of all formalities and hand over the vehicle with the desired transfer license plates for an additional charge. Some of the images have been edited and are for initial viewing only. If you are interested, please contact us and request current images.

Condition: like new (used), functionality: fully functional, first registration: 12/2014, fuel type: diesel, emission class: euro6, Year of construction: 2014, power: 340 kW (462.27 HP), Equipment: ABS, air conditioning, airbag, retarder, spoiler, DAF CF 85-460 Hook lift PRIS-MAG 30 TON 4 axles 8x2 Year 12/2014 Euro 6 Kjdjxvxkwopfx Ab Sodg 440 HP (340 kW) Engine capacity 12,902 cc Diesel Automatic gearbox Retarder Wheelbase 4,600 mm Total vehicle length 8,900 mm Gross weight 32,000 kg Payload 18,600 kg Air conditioning 4th steering and liftable axle ABS Short cab Electric windows and mirrors Mileage 420,000 km

Condition: good (used), Year of construction: 2002, 2 units of Megamat Vertical Carousels for sale. The machines are in good condition and have been serviced annually by the manufacturer. They are sold including dismantling, but excluding installation. Transportation can be arranged upon request. The machines will be available in February / March 2026. Technical information: Manufacturer: Kardex Remstar Number of machines: 2 units Year of manufacture: 2002 Model: Megamat 205x/406/30 Height of vertical carousel: 6,970 mm Ksdsx Tfq Iepfx Ab Sjdg Width of vertical carousel / carrier: 4,500 mm / 3,850 mm Depth of vertical carousel / carrier: 1,700 mm / 528 mm Number of carriers: 30 Maximum weight per carrier: 650 kg Electrics: 3/N/PE 400V, 14A Control system: Kardex MM240

Condition: new, Gamba & Fiorito Gamfior MKA 30-L spindle , hole spacing of the mounting holes: 82x82 mm, Ø drive shaft: 18/10 mm outside, 5 mm inside, unused, mint condition, 100% functional Kdjdoi D H T Ispfx Ab Sog

Condition: excellent (used), Year of construction: 1995, Straight cut: Round 530 mm Flat 1100 x 530 mm Miter Left and Right 45° Round 530 mm Flat W X H 700 x 500 mm Ksdpfxeu R Rzrs Ab Ssdg Miter Right 30° Round 400 mm Flat W x H 450 x 400 mm

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 16 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Kdjdpfx Abow N Tpve Ssg Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 180 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,460 mm, fuel type: gas, mast type: triplex, construction height: 2,215 mm, power: 43 kW (58.46 HP), fork length: 1,150 mm, empty load weight: 4,490 kg, total length: 2,715 mm, drive type: Treibgas, construction width: 1,225 mm, LPG forklift Load center of gravity: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: torque converter Speed class: 20 Condition: New machine Technical condition: New Front tires type: Superelastic Front tires Size: SE 28-9-15 Front tires Condition: 80 - 100% Rear tires Type: Superelastic Ksdpfx Aswhr Rksb Ssdg Rear tires Size: SE 6.50 10 Rear tires Condition: 80 - 100% Description: Simplicity, comfort, reliability and productivity. The MI 30 is a front and mast forklift truck with an internal combustion engine that has a lifting capacity of 3 tons and is aimed at professional users in the logistics and distribution sectors, among others. Extremely robust thanks to a rigorous choice of components and a simplified design, the machine is easy to maintain and will become a permanent part of your fleet. To ensure operator comfort and safety, access to the operator's platform has been simplified: grab handle, non-slip footboard, access from both sides... The view to the outside is optimal thanks to the rear profile supports, a large distance between the mast supports and the open roof. Sideshift, 3rd valve, rear work lights, front work lights, roof cover,

Condition: new, Year of construction: 2023, In good technical condition, fully functional and testable. Kodjvtyp Topfx Ab Sedg TVARcut LF 3015 GA Year of manufacture: 2023 (demonstration machine) Laser source power: 6 kW Max. material thickness: 27 mm Number of pallets: 2 pcs For sheet format: max. 3000 x 1500 mm Machine including voltage stabilizer and laser source cooling Total weight: 6600 kg Including training for your operator.

Condition: used, Year of construction: 1979, weight max. in kg 2000 kg tool adaptor Kugelkopf stroke height 200 mm battery 24 V / 240 Ah weight Batterie: 204 kg weight of the machine ca. 320 + 204 Kg dimensions of the machine ca. 1,1 x 1,2 x 1,4 m • Electric lift truck for roller carrier, • Battery, • Manufacturer HAWKER, type Perfect Plus, no. 5225080001, • Year of construction 2009, Kedjtwbr Ujpfx Ab Ssdg • Charger, • last UVV inspection: 01/2009

Condition: reconditioned (used), SECOND-HAND HF GENERATOR ELETTRONICA CAVALLO MOD. GAF 30 KW - Double exit - Power 30kw Ksdswr Argjpfx Ab Sjdg - Triod ITL12 - Retrofitted 2025

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 3,200 kg, Double pallet fork Ksdpfjvt Hd Rox Ab Sedg Load centre of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 15040169 + 0805014349, Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750 Turbo pump model: PMP03020GA, TPH2101P Drive electronics model: PMC01713, TC750 Turbomolecular pump: Serial number: 15040169 Inlet connection nominal diameter: DN 250 ISO-K Kdjdpevrzakjfx Ab Seg Outlet connection nominal diameter: DN 40 ISO-KF Flood connection: G1/8" Nominal speed: 31,500/min (525Hz) Suction speed N2: 1,900l/s Max. backing pressure N2: 1.5mbar Max. backing pressure He: 1.0mbar Max. backing pressure H2: 0.5mbar Oil: PM 016 144-T Drive electronics: Serial number: 0805014349 Input: 24/48/72/140V DC +/-5%, 5.4A Output: 0-140V AC, 0-1600Hz, 6.5A Note on condition: 1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and stops. 2. Process gases: nitrogen and argon 3. Process dusts: chromium nitride and steel 100Cr6 4. The pump was stored in full working order in 2018 and cleaned externally.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 14,200 mm, shelf height: 4,500 mm, support length: 2,700 mm, shelf length: 14,100 mm, load per truss pair (max.): 3,050 kg, frame width: 1,100 mm, number of shelf rows: 1, 1-row pallet rack (M45112711-3+) 14.1 m long, 4.5 m high, 1.1 m deep, 5 bays, each 2.7 m wide, 3 beam levels each, shelf load 3050 kg, complete with support grid 1000 kg. - 6 frames (RM3511 - RAL5019) - 12 base plates, shims, and screws - 24 ground anchors (ZZBA1210) - 30 single crossbeams (T27114 - RAL2008) - 45 support grids (ZG8811010004) - 1 collision protection / impact protection (ZRS40901) - 1 load-bearing plate (BSMcP) Frame bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; Kdjdpfx Asv Unxlsb Ssg except islands! Deliveries to EU countries are subject to individual agreement.

Condition: used, Year of construction: 2012, cutting diameter 410 mm saw band length 5800 x 41 x 1,3 mm table height 750 mm 430 mm 410 mm 700 x 410 mm 410 mm cutting speed 500 x 410 mm down speed 320 mm dimensions of saw-band 320 x 410 mm workpiece weight 15 - 150 m/min Kdsdpfx Abeyb S Emo Sjg 5,5 kW work height max. 3200 kg connected load 4500 x 2800 x 2000 mm Equipment: - Automatic cutting pressure and feed rate monitoring - Frequency-controlled AC drive 15-150 m/min, 5.5 kW - Hydraulic full-stroke material clamping - Automatic movement of the clamping vices - Automatic saw frame height adjustment - Minimum speed and saw blade monitoring - Electric miter tilting via servo motor - Visualized program input with CNC control - Integrated MEBA gripper infeed system from 5-2300 mm per stroke with integrated roller conveyor roller conveyor *Special equipment: - Laser light for cutting line display/ scribing saws - Driven chip brush - Micro dosing system - Clamping pressure regulation - Material bundle clamping - Job menu - Material database - Zero stop - Scraper belt conveyor for optimum chip removal, 2000 mm length - Cutting process control