Used Sac Rs 630 for sale (38)

Condition: good (used), Year of construction: 1990, For sale is a used SAC RS-53 thickness planer with a maximum planing height of up to 240 mm. The machine is in good condition and has been overhauled and inspected by our specialist personnel. Technical specifications: - 4-knife cutterhead - Planing width: 530 mm Kedpoyh Arhofx Ab Toln - Max. pass-through height: 240 mm - 4 feed speeds - Suction port Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1990 The planer is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, reference: R-G00 V0

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Planing width: 530 mm, Number of knives: 4 units, Kjdpfxsw I T N He Ab Tjln Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: excellent (used), THICKNESS PLANER model SAC SUERI RS 53 S second hand machine CE mark : Yes Technical details : Useful working width mm. 530 Maximum (minimum) working height mm. 300 (3) Maximum removal mm. 8 Klodpfx Abeglp Nio Tsn Variable feed speed by inverter m / min. 4 ÷ 16 Motorized table positioning with electronic reading n.4 knives "Tersa" Main motor power Hp 5,5 volt. 380/50

Condition: ready for operation (used), functionality: fully functional, Thickness planer SAC RS53, 4 knives Specification: • Condition – used, after inspection • Working width – 530 mm Kjdpfsxdxk Tex Ab Tjln • Working height – 240 mm • Motor power – 4.0 kW • 4-knife cutterhead for traditional knives • Analog thickness indicator • 2 feed speeds • Full, straight infeed roller before the cutterhead • Two steel outfeed rollers after the cutterhead • Slip roller in the lower table • Manual height adjustment (up/down) • Table supported by a single solid piston • Original paintwork • Outlet for chip extraction, diameter 145 mm • Weight approx. 800 kg • Overall dimensions: 95 x 100 x 105 cm (L x W x H) Additional information: • The photos shown reflect the actual condition of the item for sale • Possible to power on and test the machine on site.

Condition: excellent (used), Year of construction: 2000, Good morning, We are offering for sale a professional thicknesser of Italian manufacture, a reputable company SAC model RS63 To begin with, some useful information about the machine: * working width - 630 mm * working height - 240 mm * engine with power of 7,5 kW * 4-knife shaft for traditional knives * analogue thickness indicator * 4 feed speeds * full spiral trailing roller in front of the planer shaft. * one outfeed steel roller, smooth, behind the planer shaft. * manual up/down adjustment * top supported by 4 screws Kjdpsn E Tlzsfx Ab Tsln * brake on the motor * original paint job * outlet for sawdust extraction fi 160 mm * weight about 900 kg * 2000 year of production * machine meets CE standards * overall dimensions 110 x 116 x 121 cm (length x width x height). The machine until the last days worked in the carpenter's shop, so it bears acceptable traces of use, nevertheless, it has undergone a comprehensive review with us in order to detect and eliminate any defects so you can be sure that the machine is operational, does not require any financial contribution and is immediately ready for further work in your carpenter's shop.

Condition: ready for operation (used), Thicknesser SAC RS53 4 knives Specification: • working width - 530 mm • working height - 240 mm • 5.0 kW engine • 4-knife shaft for traditional knives • analog thickness indicator • 2 feed speeds • full, straight pulling shaft in front of the planing shaft • two steel outgoing rollers behind the planing shaft • sliding roller in the lower table • manual up/down adjustment • table supported by 1 solid piston • original painting • sawdust extraction outlet fi 140 mm • weight approx. 800 kg • dimensions 92 x 100 x 160 cm (length x width x height) Additional information: • the photos show the actual condition of the item for sale • the device can be switched on and checked on site. Klsdpfx Abowgdghj Tsn

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, Weight: 820 kg Dimensions (LxBxH): 105 x 125 x 125 cm - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 Kjdpfewnhyzjx Ab Toln - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Year of manufacture 1990 Kledpov Im Swsfx Ab Tjn 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new

Condition: used, Year of construction: 1989, For sale: Used SAC surface planer with a planing length of 2900 mm. The machine is in good condition and has been refurbished and inspected by our specialist staff. Klsdpfxeyh Auie Ab Ten Technical specifications: - 4-knife cutterblock - Planing width: 430 mm - Planing length: 2900 mm - Extractable, suction diameter Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1989 The planer is located in A-5431 Kuchl and can be inspected any time during our opening hours. Subject to prior sale! Related terms: planer, surface planer, jointer. Reference: R-G00 V0

Condition: good (used), Code: 0294 Brand: SAC Model: TS 120/C Spindle moulder with sliding carriage for milling wood, plastics, composite materials, joinery, window frames and various Technical data: Steel base with cast iron table Table dimensions mm 1100 x 700 Sliding table dimensions mm 1100 x 260 Sliding table stroke 1060 mm Kedpfxoyhqrre Ab Tsln Table height 850 mm Shaft diameter 35 mm Max tool diameter 330 mm Vertical spindle stroke 160 mm Spindle rotation speed rpm 2900/4000/5800/8000 Motor power 4 Hp Suction mouth diameter 120 mm Overall dimensions mm 1100 x 1000 x 1200 h Weight kg 580

Condition: used, Year of construction: 1979, roll diameter: 600 mm Kledpfx Aoyhgigeb Ton cutting width: 580mm table tilting: yes belt speed: motor power: 2,2 kW motor brake: yes / manual suction connection: 100mm machine length: 120mm machine width: 800mm machine hight: 2015mm weight: 200kg

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Kjdpfx Abeyg Iq Nj Tjln Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa Kedpewt T Hdsfx Ab Toln length of ground surfaces: 3000 mm hydraulic foot pedal lift volts: 380/50 Other models available as shown in the photos second hand machines

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Kledpfx Aboudxche Ton Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), SAC spindle moulder with sliding carriage and power feed 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Kodpfxjx Sw Sze Ab Tsln Spindle diameter 40 mm 7.5 kW motor with brake CE mark Technical documentation included Machine tested, fully functional, ready for work

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) Kedpfx Aex Nrvvsb Tjln - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: excellent (used), Top and bottom sander SAC 4R-300 Working width: 300 mm Working height: 2.5–150 mm 4 sanding units Klodpfx Aboygrb Sj Ten 2x bottom unit 2×5.5 kW 2x top unit 2×5.5 kW Top and bottom cleaning brush 2×0.55 kW Feed speed adjustable via frequency inverter: 4–16 m/min Electric sanding height adjustment Can be integrated into a line with other machines CE certificate

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Kjdpjyffxzjfx Ab Tjln Machine width: 800 mm Weight: 530 kg

Condition: used, Year of construction: 1996, functionality: fully functional, Planer, thicknesser SAC FS 305 – after technical inspection, ready for operation Specification: • Technical condition – used, after professional servicing • Manufacturer – SAC • Model – FS 305 • Working width – 305 mm • Table length – 2180 mm • Adjustable tilting fence • Motor power – 2.2 kW • Spindle speed – 5000 rpm • Noise-reducing comb on the cutterblock • 3-knife cutterblock, 120 mm diameter, for standard knives • Star-delta starter • Motor brake • Dust extraction outlet – 150 mm diameter • Weight – approx. 600 kg • Machine complies with CE standards • Year of manufacture – 1996 • Overall dimensions – 218 x 80 x 140 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • Photos show the actual condition of the item for sale • Possibility to connect and check the machine on-site • The listed price does not include VAT or transport costs Financing and transport: Kjdpfeyiahpsx Ab Tjln • We arrange transport with the MDD fleet, courier companies or external carriers • We provide financial support in the form of leasing or lease loans

Condition: excellent (used), functionality: fully functional, SAC F4 window making tenoning machine Technical condition: good, the machine is in working order. The price of the machine includes a large set of spare parts. Technical data: Min. workpiece height: 30 mm Max workpiece height: 90 mm (105-130 mm) Min. workpiece width: 30 mm Max. workpiece width: 600 mm Min. workpiece length: 200 mm (measured inside the pivots) Max. workpiece length: 3000 mm Max. tenoning depth: 130 mm Max. trimming width: 1000 mm Kljdpfx Aorzvkcob Ten Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Vertical stroke: 290 mm Zero tool diameter: 300-350 mm Stumpfstoßsäge (keel saw) Horizontal stroke: 130 mm Positioning with continuous axis Tool diameter: 400 mm RPM: 3000 rpm Motor power: 3.2 kW Zapfenschneidwelle (journal cutting shaft) Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 3500 rpm Profilschneiden (profile cutting) Min. workpiece height without guide on the left side: 20 mm Max. workpiece height: 140 mm Min. workpiece width: 45 mm Min. workpiece length: 200 mm (measured inside the pivots) Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Tool diameter in zero position: 110-140 mm Maximum tool diameter: 240 mm First profile cutting shaft: Motor power: 5.5 kW (7.5 or 9.25 kW) Speed (clockwise and counterclockwise): 6000 rpm Second shaft for profile cutting: Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 6000 rpm Tenon cutting carriage: Work surface dimensions: 750x900 mm Motor power: 1.1 kW Working speed: 3-10 m/min Positioning speed: 45 m/min Number of splinter guard positions: 4-8 Scale positioning with continuous axis up to 3000 mm Angular guide ± 60° Saw for glass weld unit: Motor power: 2.2 kW Saw diameter: 200 mm RPM: 6000 rpm Profile milling feeding device: Motor power: 0.75 kW Feed speed (from ... to ...): 4-20 m/min Number of rollers: 16 Diameter of rollers: 145 mm Groove cutter for metal fittings (on request) Motor power: 3.3 kW (5.5 kW) Maximum tool diameter: 190 mm Spindle diameter: 30 mm RPM: 6000 rpm Horizontal movement: 70 mm Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4300 kg

Condition: excellent (used), Working length 300 cm, pneumatic clamp, motor 1.65 kW Kledpfx Abjygxgbs Tsn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included Klodew U Dxfopfx Ab Tsn • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: excellent (used), PAOLONI SAC RD 230 15/24 four-sided srtug machine Technical data: Max planing width: 230 mm Max planing height: 120 mm Diameter of the spindles: 40 mm Number of spindles: 4 Order of spindles: bottom right left top Number of top steel pulling rollers: 2 Number of top rubber pulling rollers: 1 Number of smooth rollers in countertop: 1 Extraction spigot diameter: 3 x 120 mm Working table lubrication pump Manual lifting of the body Power supply: 400 V Total power: 21 kw Overall dimensions: Kodpfxsuy H Nws Ab Tsln Length: 3280 mm Width: 1290 mm Height: 1500 mm

Condition: excellent (used), Technical data: Working width: 960 MM 1 Combination unit Shaft diameter: 160 MM Height of processed material: 160 MM Grinding belt dimensions: 990x1800 mm Extraction spigot(s) diameter: 140 mm Electric lifting Digital display Safety switch Main motor power: 11 kW Kledpfx Abet Iv Azs Ton Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: used, Year of construction: 2003, with electronic rip fence and large cutting width 1500 mmused, top condition, top equipmentMake SACType CS 450Year of construction 2003Machine no. LD 2206CE-type testedMotor 5.5 kWSteel guidesCar length approx. 3200 mmCutting width approx. 1550 de diameter 450 mmswiveling up to 45 °Scoring unitControl panel can be swiveled at the topRip fence with automatic controlTable top extension approx. 940 mm x 650 mmElectric height adjustmentPositioning control 3 axesDigital display:- Height- cutting angle- Rip fence- Rotation speedExtraction connection D 100 mm / 120 mmRequired space approx. 3400 mm x 3700 mm x 1800 mmWeight approx. 1500 kgTotal connected load approx. 6.25 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Kodpfsvyd Dbox Ab Tsln