Used Safety Contactor for sale (10,630)

Condition: excellent (used), Year of construction: 2022, operating hours: 3,600 h, functionality: fully functional, Description: Like-new welding cell including bolt-setting equipment with only 3600 operating hours, consisting of: Robot Qirox QRC 350, QC2 control system including connection cable, programming handheld device, gas nozzle sensor, arc welding search, point editor, QWP, QTI, Manax, hard drive, center-based circular programming Base stand Welding machine Qineo Next 452 Motion, wire feeder, welding torch, torch testing gauge, hose package, mechanical cleaning, 1 light curtain, start pre-selection, safety grid in the insertion area, service door with limit switch protection 1 manipulator QR-WP-TC 2.5 KN for components up to Ø 800 mm, plate distance 2000 mm and a load capacity of 250 kg. 1 extraction hood including hose lines without filter unit 1 Bolte bolt-setting device complete Automatic changeover system between bolt-setting head and welding torch Lhjdpfxjzvm Anj Adpok Documentation, manufacturer's declaration Accessories: Functional guarantee. Services available upon request. Delivery date: possible in the short term. Subject to prior sale. The system can be inspected under power near Siegen. Special price if dismantled by the end of September 2026!

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C Lhedpfxexx Ti Te Adpsk OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: good (used), Year of construction: 2007, operating hours: 68,651 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, displacement volume: 154 cm³, Equipment: documentation/manual, ENGEL Victory 330-120 Tech Stock no.: 503558 Manufacturer: ENGEL Model: Victory 330-120 Tech Control system: CC100 Year of manufacture: 2007 Operating hours: 68,651 h Technical Data – Clamping Unit Clamping force: 1,200 kN Platen size (H x V): 740 x 680 mm Minimum mould height: 300 mm Maximum daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 825 kg Technical Data – Injection Unit Screw diameter: 35 mm Shot volume: 154 ccm Injection pressure: 1,600 bar Screw L/D ratio: 20 l/d Screw stroke: 160 mm Screw speed: 400 rpm Free injection flow: 151 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (L x W x H): 4.5 m x 2.1 m x 2.1 m Total weight: 7,300 kg Equipment Screen text in German CEE socket 16A Hydraulic core pull, 2x Machine including conveyor belt Machine including safety enclosure Machine without material hopper Levelling elements Interface for ejector plate safety Schuko socket 10A Lhedjytfgnepfx Adpsk Technical Data – Handling Machine type: Linear Brand: ENGEL Control system: ER-HLI41VC Year of manufacture: 2007

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, Spindle moulder manufactured in 2008. This Colombo AM 60 features a robust design suitable for various woodworking applications. If you are looking to get high-quality woodworking capabilities, consider the Colombo AM 60 spindle moulder we have for sale. Contact us for further details. • Control: Computer / PLC-controlled • Display: 12" colour LCD-TFT • Interface: RS232 • Operating system: Windows • Saw unit – blade diameter: 400 mm • Saw spindle diameter: 30 mm • Saw blade speed: 3,000 rpm • Saw motor power: 3 kW • Tenoning spindle diameter: 50 mm • Effective spindle length: 600 mm • Max. tool diameter: 320 mm • Effective travel: 550 mm • 1st profiling spindle diameter: 50 mm • 1st profiling spindle effective length: 600 mm • 1st profiling spindle max. tool diameter: 200 mm • 1st profiling spindle speed: 6,000 rpm • 1st profiling spindle motor: 7.5 kW • 1st profiling spindle effective travel: 550 mm • 2nd profiling spindle diameter: 50 mm Lhsdozvcqbspfx Adpok • 2nd profiling spindle effective length: 600 mm • 2nd profiling spindle max. tool diameter: 220 mm • 2nd profiling spindle speed: 6,000 rpm • 2nd profiling spindle motor: 2.2 kW • 2nd profiling spindle effective travel: 550 mm • Glass bead spindle diameter: 35 mm • Glass bead spindle effective length: 20 mm • Glass bead tool diameter: 200 mm • Glass bead spindle motor: 2.2 kW • Tape/feeding carriage speed: 1–80 m/min • Safety enclosure: Sound-insulated safety guarding

Condition: ready for operation (used), Year of construction: 2015, overall weight: 280 kg, number of axes: 6, This 6-axis KUKA KR16-2 robot arm was manufactured in 2015. It features a payload capacity of 16 kg and a maximum reach of 1650 mm. Versatile mounting options include floor, inverted, or angled setups. Ideal for material handling, assembly, welding, and more. Weighs approximately 280 kg. Compatible with KUKA KR C2 or KR C3 series controllers. Contact us for more information about this machine. Additional equipment • Drive System: Servo motors with harmonic drive gearing Machine Benefits Technical Machine Benefits • Application areas: material handling, assembly, welding, machine tending, pick and place • Safety features: integrated safety functions according to industrial standards • Reach: 1650 mm • Repeatability: ±0. 03 mm • Mounting options: floor, inverted, or angled mounting possible • Power supply: typically 400 v, 50/60 hz • Controller compatibility: compatible with kr c2 or kr c3 series Lhodpozvvlxofx Adpek Extra Information Movement Motion Range per Axis: Axis 1 (Base rotation): ±170° Axis 2 (Shoulder): +85° to -125° Axis 3 (Elbow): +156° to -102° Axis 4 (Wrist 1): ±185° Axis 5 (Wrist 2): ±120° Axis 6 (Wrist 3): ±350°

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Lhsdpfxsu Au U Te Adpek Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: ready for operation (used), Year of construction: 2022, operating hours: 731 h, pressing force: 51 t, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, number of axes: 7, This 7-axis TRUMPF TruBend 7050 (B28) was manufactured in 2022. It features a press force of 500 kN and a bending length of 1,530 mm. The machine includes a dynamic electromechanical drive and a CNC-controlled crowning system for precise bending operations. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend 7050 (B28) press brake we have for sale. Contact us for further details. • Drive: Dynamic electromechanical Torque Drive Lsdpfxozu S Uao Adpehk • Capacity and dimensions: • Free upright clearance: 1,305 mm • Usable installation height: 385 mm • Throat depth: 250 mm • Working height: 1,150 mm • Machine frame: Stable welded frame • Axes and backgauge: • CNC axes: 7 (Y, X1, X2, R1, R2, Z1, Z2) • Backgauge: 6-axis independent system (X1/X2/R1/R2/Z1/Z2), both units move independently • Backgauge features: Carbon-fiber fingers, hardened reference surfaces, helical rack Z-drive, flexible positioning • Travels / working range: • Y stroke: 215 mm • X travel: 240 mm (max backgauge range 500 mm) • R travel: 153 mm • Speeds: • Y rapid/return: 220 mm/s • Y working: 25 mm/s • X: 1,500 mm/s • R: 750 mm/s • Z: 2,200 mm/s • Positioning accuracy: • Y: 0.002 mm • X: 0.02 mm • Z: 0.02 mm • Crowning: • CNC-controlled crowning, automatic compensation via drive • Crowning drive integrated in the table • Suited for multi-station bending • Y-axis / press beam: • Inductive Y measuring system • Dynamic spring-back compensation with automatic force-based correction • Hardened adjustable guide strips • Control system: • TRUMPF Touchpoint TruBend, 21.5" TFT Full HD (1920×1080) • Intel Core i5 2.7 GHz dual-core, Windows Embedded Standard 7 • Realistic 3D visualization, TRUMPF technology database • User management with Standard/Expert/Administrator levels • 10 user access cards included • Data interfaces: • USB, RJ45, Ethernet 10/100 Mbit/s • Central Link, OPC UA • Internet teleservice / remote diagnostics • Tool clamping and setup: • Automatic TRUMPF upper and lower tool clamping (self-centering, hardened) • Fast segment change • LED Tool Indicator integrated in upper clamping (shows setup positions/next bend station) • Safety: • Automatic BendGuard (part of Productivity Package Plus) • Optoelectronic safety system with automatic tool-height setting • Allows max permissible Y speed with foot pedal • Automatic adjustment, movable out of working area for side processing • Electronically monitored side safety doors • Electrically operated lift-up rear doors • Emergency stop • Transport securing devices • CE marking • Ergonomic package: • Front support table • Front and rear LED work-area lighting • Support for seated/standing operation • Document shelf • Drawer for measuring instruments Additional equipment • Measuring equipment: • Digital angle gauge • Digital caliper • 90-degree edge square • 1x TecZone Bend license • Wireless 2D code reader with Bluetooth connection Technical Specification Bending Length 1530 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 367 h, functionality: fully functional, turning length: 2,845 mm, turning diameter: 1,150 mm, total height: 1,890 mm, total length: 6,740 mm, total width: 2,205 mm, workpiece weight (max.): 5,000 kg, overall weight: 9,170 kg, Equipment: documentation/manual, Hankook Protec 9NC 3000 Flat Bed CNC Lathe — 2014 Year: 2014 Machine: Hankook Protec 9NC 3000 Type: Flat Bed CNC Lathe Running Hours: 367 hours Available for sale is a 2014 Hankook Protec 9NC 3000 Flat Bed CNC Lathe, showing just 367 hours. The machine is supplied with all three steady rests, making this a very well-equipped machine and an excellent opportunity for anyone looking for a heavy-duty CNC turning centre with very low hours. Key Features Hankook Protec 9NC 3000 2014 model Only 367 hours ! Flat bed CNC lathe 3 x steady rests included 3 Jaw and 4 Jaw Chucks Heavy-duty construction Lhedpfx Adszvgayspek Suitable for a wide range of turning applications Low-hour machine Safety platform included Turning diameter over bed: Ø1150 mm Turning diameter over carriage: Ø830 mm Maximum turning length: 2845 mm Spindle bore: Ø105 mm Maximum turning weight: 5000 kg A very clean, low-hour example of a Hankook Protec 9NC 3000, complete with all three steady rests. Contact us for further information, photographs, specifications or to arrange an inspection.

Condition: used, mileage: 64,000 km, power: 95 kW (129.16 HP), first registration: 11/2012, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 3,500 mm, Equipment: ABS, central locking, soot filter, Chat with us now via WhatsApp: Get in touch with our sales consultant quickly and easily. Attention!!! Sales are preferably made to businesses. Internal ID number: [3405] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German technical inspection) & emissions test * Nationwide delivery * Financing also possible without a down payment * Spring offer: If desired and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (depending on the vehicle and manufacturer). ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * 1st owner * Euro 5 standard * Accident-free * High and long * Trailer coupling up to 3,500 kg possible * Reinforced springs * Rear view camera * Bluetooth multimedia system * 3 seats Special equipment: Airbag on the passenger side, trailer socket 13-pin, battery 100 Ah, windows for rear doors, window in the cargo/passenger compartment: - fixed, front right, rear door (opening angle 270 degrees), wooden floor in the cargo area, folding cover for storage compartment, cargo area partition with sliding window, parking assistance system (PTS), crossmember with integrated step, interior mirror, seats in the driver's cab: double passenger seat, stabilizer bar rear, stabilizer bar front reinforced, lining in the cargo/passenger compartment: plywood Additional equipment: 3rd brake light, adaptive brake light, airbag driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, brake assistant, braking system with ABS+ASR, roof lining in the driver's cab, glove compartment lockable, body/structure: high-roof standard van, child lock, fuel tank: main tank 75 liters, load securing / lashing eyes, headlight range adjustment, engine 2.1 liters - 95 kW CDI CAT (2143 ccm), wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to exhaust standard Euro 5, sliding door cargo/passenger compartment right, safety belt system with warning system (driver's side), seat cover / upholstery: fabric Lima, service interval display Assyst, heat protection glazing, permissible total weight 3.5 t ----Do you want to lease or finance? We offer attractive deals - financing is also possible without a down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. ----Note: Ledpfx Aoyzlptedpshk All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are subject to change. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: used, mileage: 270,000 km, power: 95 kW (129.16 HP), first registration: 09/2013, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Attention!!! Sales are preferably made to commercial businesses. Internal ID number: [ 3098 ] ----Optional extras: * 12-64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing possible even without a down payment * Spring offer: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: * 19% VAT can be shown separately * German vehicle * Accident-free * 2nd owner * Regularly serviced * Ready for immediate use * High roof and long body * Automatic climate control * Trailer hitch, up to 3,500 kg possible * Reinforced springs * Reversing camera * Comfort equipment * 3 seats Special equipment: Ljdpezdm Hpofx Adpehk Audio system Audio 10 (radio with CD player), Equipment package: Driver Comfort, Equipment package: Easy Cargo, Outside temperature display, Roof console with reading light for driver/passenger side, Generator 180 A, Spare wheel in driving condition, Spare wheel carrier under the end of the frame including jack, Seats in the cab: Passenger double seat, Stabilizer bar, rear, Stabilizer bar, front reinforced, Fleece battery 95 Ah Additional equipment: 3rd brake light, Adaptive brake light, Airbag driver side, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior mirrors with integrated turn signal, Brake assistant, Brake system with ABS+ASR, Headliner in the cab, Glove compartment lockable, Body/structure: High-roof standard van, Child safety lock, Fuel tank: Main tank 75 liters, Cargo area partition, Load securing / lashing eyes, Headlight range control, Model update, Engine 2.1 L - 95 kW CDI CAT (2143 ccm), Wheelbase 3665 mm, Smoker's package, Low emissions according to emission standard Euro 5, Sliding door load/passenger compartment right, Safety belt system with warning system (driver's side), Seat cover / upholstery: Fabric Lima, Service interval indicator Assyst, Heat-protective glazing, Permissible total weight 3.5 t ----Do you want to lease or finance? We offer attractive offers – even without a down payment! Feel free to contact us. Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are subject to change. The binding condition of the vehicle results exclusively from the purchase contract on site or from written assurances. We prefer to sell vehicles with a mileage of over 50,000 km or older than 3 years to our business customers.

Condition: used, mileage: 159,999 km, power: 120 kW (163.15 HP), first registration: 08/2016, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: [3536]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options, even without a down payment * Trade-in of your vehicle, whether old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery---- Summer offer: On request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (vehicle and manufacturer dependent).---- Vehicle highlights: 19% VAT can be shown German vehicle Regularly maintained Immediately ready for use Euro 6 standard 1st owner Lhsdpfx Ajzu H Eaedpsk Refrigerated box ThermoKing V300 Max Driving and stationary cooling 2-chamber cooling Air suspension on the rear axle Automatic transmission Special features: Audio system Audio 15 (radio with color display), outside temperature display, battery disconnect switch 1-pole, roof console with reading lamp driver/passenger side, entry lights, generator 180 A, folding cover for storage compartment, fuel filter with water separator, steering wheel (steering column mechanically adjustable), steering wheel with multifunction including trip computer, engine drive front with carrier for additional coolant compressor, navigation system Becker MAP Pilot, spare wheel holder under frame end including jack, seats in the cab: double passenger seat, seats in the cab: double passenger seat with foldable backrests, seats in the cab: driver's seat comfort, stabilizer rear reinforced, stabilizer front reinforced, interior trim rear wall, fleece battery 95 Ah, front axle reinforced, heat-insulating glazing (windshield with band filter at the top) Additional features: Adaptive brake light, airbag driver side, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior mirrors with integrated turn signal, battery 74 Ah, brake system with ABS+ASR, roof lining in the cab, glove compartment lockable, body/structure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model refinement, engine 2.1 liter - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emission according to emissions standard Euro 5, safety belt system with warning system (driver side), seat cover / upholstery: fabric Lima, seats in the cab: passenger seat adjustable, service interval display Assyst, permissible total weight 3.50 t ---- Would you like to lease or finance? We offer attractive offers – even without a down payment! Please contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: used, mileage: 16,959 km, power: 125 kW (169.95 HP), first registration: 12/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, CO₂ emissions: 277 g/km, fuel tank capacity: 93 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 6, loading space length: 3,400 mm, loading space width: 2,030 mm, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, cruise control, hill-start assist, power mirror, start-stop system, traction control, trailer coupling, = Additional options and accessories = - Attention assist - Automatic low beam - Outside temperature gauge - Heated exterior mirrors - Passenger airbag - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Speed limiter Lhodpfxszv D A So Adpok - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Air conditioning - Collision mitigation by braking - Comfort seats - Lumbar support - Front center armrest - Multifunctional steering wheel - Emergency brake assist (BA3) - Radio with DAB - Rain sensor - Rearview camera - Smartphone integration - Lane keeping assist - Immobilizer - Thermal glass - Blind spot monitoring - Traffic sign recognition - Connected services - WiFi hotspot = Additional information = General information Number of doors: 2 Model range: Apr. 2024 - 2026 Cab: double Technical information Torque: 400 Nm Number of cylinders: 4 Engine displacement: 1,950 cc Dimensions Length/Height: L3 Weights Unladen weight: 2,165 kg Payload: 1,335 kg GVWR: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Interior Interior color: black Consumption Average fuel consumption: 9.5 l/100km Maintenance, history and condition APK (Technical inspection): valid until 12/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), mileage: 293,596 km, power: 158 kW (214.82 HP), first registration: 02/2021, fuel type: diesel, tire size: 245 / 70 / R17.5, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, number of gears: 6, suspension: steel-air, number of seats: 2, total length: 9,300 mm, total width: 2,550 mm, total height: 3,650 mm, permissible axle load (axle 1): 4,480 kg, permissible axle load (axle 2): 8,480 kg, loading space length: 7,220 mm, loading space width: 2,470 mm, loading space height: 2,380 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, spoiler, tail-lift, General information Number of doors: 2 Cab: half sleeper Technical information Number of cylinders: 4 Engine capacity: 5.132 cc Transmission Transmission: Volvo, 6 gears, Automatic Axle configuration Tyre size: 245 / 70 / R17.5 Make axles: Volvo Brakes: disc brakes Front axle: Max. axle load: 4480 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 8480 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 6.691 kg Carrying capacity: 5.299 kg GVW: 11.990 kg Functional Tail lift: Dhollandia DHLM.20, tail lift, 1500 kg Make of bodywork: Brinks Carrosserie Plywood Box Interior Interior: grey Environment Emission class: Euro 6d Maintenance APK (MOT): tested until 02/2027 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Armrest - Car kit - Low-noise Ledpfx Adszv Dubopjhk - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera - Speed limiter - Spoilers - Stability control - Visor

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 432 h, load capacity: 3,500 kg, free lift: 1,500 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, drive type: Diesel, Diesel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Lhedpozvz Eqofx Adpek Rear tire condition: 80 - 100% 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, joystick, LED, seat

Condition: new, axle configuration: 3 axles, loading space length: 68,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 4,480 mm, color: black, = More options and accessories = Ljdpfeylx Aajx Adpehk - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 2-220 PAVIC HTA 27 68E timber trailer. Equipped with axle lift for the second axle. Immediately available!!! Wheelbase approximately 4,485 mm Technically permissible gross weight: 27,000 kg 3 x 10t off-road axles, SAF type, air suspended, single tyres with disc brakes The trailer is fitted with 6 high-quality brand tyres, size 385/55 R 22.5 Alcoa Dura-Bright aluminium rims available at extra cost (see photo) Extendable drawbar, 12 x 50 mm Axle reinforcement for off-road use Safety cables for air suspension Smartboard/TIM/Info centre Six welded lashing ring elements per side OPTIPA bolster body featuring: 6 OptiPa SL steel bolsters 12 OptiPa AL10 aluminium stakes Optional: Alcoa Dura-Bright aluminium rims (as shown in the listing) Option for "only" 4x OPTIPA bolsters with 8x OPTIPA AL10 stakes, instead of 6 bolsters with 12 stakes. Financing / hire purchase as well as leasing / partial amortisation leasing available through our leasing partner. Should you have any further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Axle configuration Tyre size: 385/55-22.5 Brakes: disc brakes Suspension: air suspension Front axle: steered Rear axle 1: lift axle Weights Gross weight: 27,000 kg Functional Body brand: PAVIC Short Timber Bolster OPTIPA SL Condition Overall condition: very good Technical condition: very good Visual condition: very good

Condition: new, axle configuration: 2 axles, loading space length: 62,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 385/55-22,5, wheelbase: 4,140 mm, color: black, = Additional options and equipment = - LED lighting - Air suspension = Notes = Internal reference number for customer inquiries: 1-673 PAVIC HTA18 62E, 2-axle lightweight short timber trailer with single tires. The trailer is available in three different lengths: 5,800 mm 6,200 mm 6,600 mm 4x OPTIPA SL bolster base assemblies 8x OPTIPA AL10 aluminum stanchions Approx. unladen ride height: 1270 mm Approx. wheelbase: 4140 mm Approx. front overhang: 710 mm Air suspension Safety cables for air suspension 2 x 10t SAF CD axles OFF ROAD Tires front/rear: 385/55R22.5 on steel rims (also available with aluminum rims at extra cost) DuoMatic quick coupling EBS - ABS Wabco smartboard Signal lamp system at the front for recognizing max. airbag pressure LED multifunction rear lights 4 x LED work lights with protective cover KTL coating for maximum corrosion protection 6 welded ring lashing points per side Movable grabber at the front with 20 mm steel cable Shunting coupling at rear Lhedoyl Tm Topfx Adpsk Turntable with double ball race Financing is available through our various financing partners. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors, and changes. = More information = Tire size: 385/55-22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered GVW: 18,000 kg Body brand: PAVIC short timber bolster OPTIPA SL Overall condition: very good Technical condition: very good Visual condition: very good

Condition: used, functionality: fully functional, This pre-owned STOW pallet racking system is a compact, high-performance heavy-duty rack designed for industrial storage requirements. Its modular high-bay design is ideal for logistics centers, industrial settings, large-scale warehouses, and freight forwarding companies. With a shelf load capacity of up to 2,250 kg per level and a bay load capacity of up to 9,000 kg, this immediately available pallet racking solution offers efficient storage for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 1,050 cm - Depth: approx. 110 cm - Length: approx. 5,040 cm - Shelf load: 2,250 kg - Beams: approx. 270 x 12 x 5 cm, model PNB0472 - Beam color: yellow, painted - Frames: approx. 1,050 x 110 cm, pre-assembled - Frame color: blue, painted - Levels: floor + 4 - Pallet spaces: 270 including floor positions - Model: STOW, pre-owned SCOPE OF DELIVERY: - 19 x Frames (approx. 1,050 x 110 cm), pre-assembled - 144 x Beams (approx. 270 x 12 x 5 cm) PNB0472 - 288 x Safety pins Price: €6,960.00 net €8,282.40 gross An invoice with VAT shown separately will be provided. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our logistics partners – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option Ledpezv Rhnofx Adpjhk - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer individually tailored to your requirements. Whether for new builds, modifications, or expansions – we offer expert advice on your racking configuration. SHOWROOM: You are welcome to visit our showroom! On site, you can get a comprehensive impression of our pallet racking, storage shelves, and other solutions. Many systems are set up and ready for you to experience directly. Our expert consultants are available to answer your questions and provide personalized advice – we look forward to your visit! Haven't found what you're looking for? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You will find our phone number on our company page ☎️ We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, APPROX. 8.4 RUNNING METERS, H: 500CM, SHELF LOAD: 4500 KG, PALLET RACKING, HEAVY-DUTY RACKING, HIGH-BAY RACKING, INDUSTRIAL RACKING, RACKING IMMEDIATELY FROM STOCK Approx. 8.4 running meters, h: 500 cm, shelf load: 4500 kg Pallet racks, heavy duty racks, high racks . Industrial shelving , Racks Immediately from stock Lsdpozv Rilsfx Adpjhk Data : - Height : approx. 500 cm - Depth : approx. 110 cm - Length : approx. 8.4 running meters - Load: 4500 kg shelf load - Stand in galvanized - Cross beams 270 x 15 x 5 cm, T45 - Cross beams in orange - New BLT PR50/101 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 04 x upright approx. 500 cm x 110 cm, disassembled. - 18 x crossbar approx. 270 x 15 x 5 cm, T45. - 36 x safety pins. - Levels: Floor + 3 - 36 pallet spaces incl. floor spaces. - - IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 1840,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece.

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump Lhodpezv Sbiofx Adpsk - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system, 2-axis, with rack and pinion drive for X and R axis - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping", manual, hardened, self-centering; for vertical tool change - Lower tool holder with hydraulic clamping, hardened Lower tool movement - Lower tool movement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000, graphical - Workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15" touch screen - Network-enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system, 5-axis (X, X1, R, Z1, Z2) + Upper tool clamping, hydraulic + CNC crowning + BendGuard + Additional foot switch + 2 support consoles + 1 MobileControl + ACB prepared

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function Ledpfxszv Sars Adpohk + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 Lsdpfx Aszv H N Iedpohk ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initialized: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Capacity: 48 V / 620 Ah - Year of manufacture: 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Condition: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! Lhodpfx Ajzv H N Ujdpok - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2021, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,900 mm, operating hours: 498 h, fuel type: electric, mast type: duplex, Manufacturer + model: STILL EK-X 10 Mast: 2W5350 ID: 26092.2114 Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Lsdpfxszv Rrys Adpjhk Initial inspection: Yes Cabin width: 1200 mm Year: 2021 Hours: 498 hours Capacity: 24V / 620Ah Options: FULL options!! - DUAL steering!!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot Complete, LIKE NEW!!

Condition: like new (used), Year of construction: 2020, load capacity: 1,000 kg, lifting height: 5,350 mm, construction height: 2,899 mm, operating hours: 1,478 h, fuel type: electric, mast type: duplex, Manufacturer + model: LINDE V 10 / Mast: 2W5350 ID: 26063.5270 Lodpfxszv Rvls Adpohk Category: Demo Mast: 2W Lowered height: 2900 mm Lifting height: 5350 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Cabin width: 1200 mm Year: 20 Operating hours: 1,477 hours Battery capacity: 24V / 930Ah Options: FULL options!! - DOUBLE steering!!! - Special SAFETY gates!! - Adjustable forks! - 2 x Blue spot

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19.7 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 12,855 kg, empty load weight: 2,145 kg, loading space volume: 17.3 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Price available upon request. The price applies ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible by arrangement. Leasing/hire purchase possible! Available in approximately 5-6 weeks, RAL color of your choice. Technical description: • Internal dimensions: 6000 x 2300 x 1250 mm • Usable volume: 17.3 cbm • Tare weight: 2145 kg • Floor: 5 mm S 235 • Side walls: 3 mm S 235 Lhodezu Rk Tspfx Adpjk • All sheets and profiles continuously welded • Double-wing door with safety lock • Container tested and approved according to DGUV Rule 114-010 • Warning markings according to DIN 67520 • Standard ladder, screwed on, galvanized • Floor-side wall connection 45° • Hook diameter 50 mm, S 355 • Hook height 1570 mm • Upper frame, round tube Ø 89 mm • Mesh hooks • All moving parts lubricatable • Steel drain rollers 159 × 6.3, length 300 mm • Zinc phosphate primer inside and out, painted on the outside with synthetic resin paint (80-100 μ) • Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit, including 19% VAT.