Used Sanding Machine for sale (65,097)

Condition: excellent (used), Year of construction: 1992, Belt dimensions: 2600 x 150 mm Sanding belt motor power: 2.2 kW Operating voltage: 3 x 400 V + PE / 50 Hz Sanding table height-adjustable via handwheel Fpjdpett Da Dofx Aa Rsk Table size: 975 x 340 mm Height-adjustable sanding table for radii; size: 400 x 200 mm Sanding beam can be swiveled 90 ° - 0 ° Suction connection Ø 120 mm CE Space requirement (L x W): approx. 1600 x 725 mm Weight: approx. 320 kg Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2001, Professional 4-side sanding machine OMEF model LEVIG (year 2001). This high-performance machine is equipped with an extensive configuration of sanding aggregates, ensuring precise and efficient processing of wooden components from all four sides simultaneously. Perfect for advanced woodworking and manufacturing shops. Aggregate Configuration: 1. Bottom Fpedpfxezmgbxo Aa Rek 2. Top 3. Transverse top 4. Transverse bottom 5. Right vertical 6. Right horizontal 7. Left vertical 8. Left horizontal Technical Specifications: • Manufacturer: OMEF • Model: LEVIG. 1NT-1NLLsx + 1NT-1NLLdx • Year of manufacture: 2001 • Total power: 16.74 kW • Working pressure: 5 - 6 bar • Weight: approx. 2000 kg Workpiece dimensions (min. / max.): • Thickness: 10 / 70 mm • Width: 20 / 90 mm • Length: 400 / 2900 mm Machine dimensions: • Length: approx. 7.0 - 8.0 m • Width: 2.2 m • Height: 2.0 m

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Fodpfx Aajw I U Aho Repk Weight 250 kg Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), maximum belt width 240 mm mechanical oscillation Fsdezmwddepfx Aa Rjpk cast iron housing dimensions of the side table: 800x450 mm two motors, 4.5 kW each manual adjustment of the unit spacing

Condition: good (used), Year of construction: 1993, Table dimensions 800 x 2790 mm throat 550 x 310 mm motor power 4,0 kw sanding belt measurements 150 x 7800 mm 2600 Working width 850 mm Dust suction hood 180 mm Fjdpjzfqkhefx Aa Repk

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Wesetslintner edge grinding machine, model KSMO-1, with a grinding belt length of 2600 mm. The machine is in very good condition and has been inspected by our qualified personnel. Fpjdpfx Aaezl Ti To Rjk Technical data: - Belt length 2600 mm - Table area 930 x 330 mm - Motor with 2.2 kW / 3 HP - Belt width 150 mm - With oscillation - Dust extraction connection 120 mm - Weight 270 kg - Robust design - Made in Austria - Free delivery within Austria The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: Grinding machine, edge grinding machine, edges, KSM, KSM 260 Reference: A0117-9998

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding belt length: 2,600 mm, grinding belt width: 200 mm, extraction connection diameter: 140 mm, grinding height: 200 mm, power: 3 kW (4.08 HP), roller diameter: 120 mm, Large, yet space-saving design with a belt width of 200 mm! Quick-adjustment for sanding table height, including a miter fence with scale, and aggregate swivel function via handwheel. Electrical connection 400 V, motor power 3 kW (4.0 hp), oscillation motor 0.18 kW (0.25 hp). Fpodpfxszi Az Te Aa Rsk Belt length 2,600 mm, belt width 200 mm, table size 930x300 mm, roller diameter D=120 mm, miter fence. Weight approx. 280 kg, dust extraction port 140 mm. Recommended retail price €5,400 plus VAT.

Condition: like new (used), For sale is a like-new JET cylindrical grinding machine, model JWDS 1632, with a maximum grinding width of 406 mm / 812 mm in 2 passes. The machine is in like-new condition and has been refurbished and inspected by our qualified technicians. (Fully functional) Fodpezgrz Rofx Aa Repk Technical specifications: - Power: 230 V / 1.1 kW / 1.5 HP - Drum speed: 1,450 rpm - Grinding speed: 9.5 m/s - Feed rate: 0 - 3 m/min - Maximum grinding width: 406 mm / 812 mm in 2 passes - Minimum grinding length: 60 mm - Grinding thickness: max / min 75 / 0.8 mm - Dust extraction connection: 100 mm - Dimensions (L x W x H): 1,010 x 510 x 1,270 mm - Weight: 71 kg The machine is located in A-8561 Söding and can be inspected and collected at any time during our opening hours. Subject to prior sale! Related terms: grinder, grinding machine, grinding Reference: R-R05Y9

Condition: used, Year of construction: 1953, grinding wheel dia. x width ca. 200 x 25 mm magnetic clamping plate ca. 450 x 170 mm cross feed of the table 200 mm revolutions of grinding spindle 3000 U/min grinding wheel hole diameter 51 mm weight ca. 1300 kg 0,001 - 0,013 mm grinding length 600 mm Surface grinding machine Includes extractor 1 additional grinding wheel holder Fpodexu Nw Eepfx Aa Rsk Machine was in occasional use until recently

Year of construction: 2014, condition: used, Number of sanding units 6 St. sanding width 180 mm Sanding height max. 150 mm STAEHLE Grinding Machine Type Gloria/Saturn E 180 RF ----- Stähle Hess Finish Grinding Machine Type Saturn E 180 RF (formerly Gloria) with 2 grinding units, plus top and bottom Roto Finish grinding attachments. 1 upper grinding belt 1 lower grinding belt 2 upper Roto Finish grinding attachments 2 lower Roto Finish grinding attachments Fedpfox Dng Dsx Aa Rspk For a detailed description, please see the accompanying PDF from the manufacturer. Sold on behalf of a customer. The images are from our archive and were taken before the machine was delivered to the customer. (Technical specifications according to the manufacturer - without guarantee!)

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Full text as PDF attachment! Short description: Machine with infeed conveyor and automatic height detection. It has two grinding discs on top and two grinding discs on the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal grinder for squared timber and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand guarantees maximum precision and uniformity. It is equipped with grinding discs, flap brushes, and a double disc for more effective material removal, thus improving adhesion for subsequent treatments. The Q-Sand can be installed in a production line or, due to its complete operational autonomy, can also be used independently. It is also ideal for Fpodpsxyafkefx Aa Rek window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above-mentioned machine available upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net prices, excluding VAT. The video is from the manufacturer Ecoline and shows a new machine.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Large, used Enorm (now Kündig) edge sanding machine in very good condition. LBK-D/solid – manufactured in 1995 The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the liquidation of our carpentry business. Fpodpfx Aeziupiea Rjk Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, and for damages resulting from injury to life, body or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: ready for operation (used), Number of sanding units 2 st. sanding width 190 mm Sanding height max. 4-180 mm HESS - GLORIA 2 BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer's description: ----- Compact design designed according to modern principles. Quiet and vibration-free operation thanks to rigid, stable machine housing and Fedpfx Aaev D Rg De Ropk special insulation. Work safety device in accordance with the EC Machinery Directive with the "dust-tested" certificate. Offset grinding units with large-dimensioned tension rollers for good heat dissipation and stable sanding belt guidance. Sanding units with forced sanding belt oscillation. 2-point sanding dust extraction directly on the sanding roller. Airborne dust extraction on the large tension rollers. Integrated sanding belt blower for longer service life of the sanding belts. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction. Motorized grinding thickness adjustment of the entire upper unit via precision threaded spindles and linear ball sets on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and grinding shoe in a balanced ratio to the grinding belt grain load. Hardened and ground grinding rollers. Maintenance-free and wear-free oxide ceramic grinding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional accuracy. Grinding belt tension via pneumatic cylinder. Grinding belt change via pneumatically controlled belt relaxation. Ability to adjust the grinding belt run when changing the belt. Electro-pneumatic pressure monitoring of the compressed air supply with visual fault display. Automatic machine stop triggered when sanding belt breaks and by run-in protection with integrated wood thickness control. Optical display on the control panel. Feed device and proven, calibrated non-slip and non-adhesive transport belts on precisely ground tables and spring-loaded pressure rollers. Cardan shaft drive for even wood transport. Feed speed continuously adjustable. Chip removal adjustment bottom via precision threaded spindle with dimension display via scale ring (resolution 0.1 mm) Ergonomic arrangement of the operating and setting elements on the machine front: sanding unit and brush device at the top, sanding unit and brush device at the bottom, workpiece transport device, sanding thickness setting, operating display, fault display. Control and operating unit with lockable main switch built into the machine housing. All motors electrically protected against overload. Technical data: ----- Grinding belt speed: 24 m/sec. Grinding width: 190 mm Grinding thickness: 4 - 180 mm Shortest workpiece length: 300 mm Feed speed: Continuously adjustable 5 - 25 m/min. Sanding belt dimensions: 200 mm wide 1600 mm long Electrical connection: 400 V, 3/N PE, 50 HZ Grinding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 - 2500 m3/h 20 - 25 m/sec. Extraction connection nozzle: 2 x 160 mm diameter at the top of the machine housing External dimensions: Length: 1600 mm Width: 1030 mm Height: 1820 mm Height with extraction nozzle: 1930 mm Working...

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Fodpfx Ast Tqy Esa Rjpk Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Fpjdpfjvnv Tqox Aa Rek Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, total height: 950 mm, total length: 880 mm, total width: 3,075 mm, type of input current: three-phase, DGUV certified until: 07/2027, Riehle Belma 2000 Icing Machine 3 icing curtains Stainless steel design, mobile with tilting device for rolls very robust technology DGUV V3 certified – only available from us Connection: 400V, 16A-CEE plug Fsdpfx Asyaf Eqoa Ropk Dimensions: 3075 x 880 x 950 mm, L x W x H Used machine, cleaned & SAB inspected with warranty + spare parts service Optional: Service package Maintenance contract Spare parts box Delivery service Training & commissioning We have other bakery machines in stock!

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Fpedpfxozkmdhe Aa Rok Total weight 3050kg Condition very good. Available immediately.

Condition: new, Year of construction: 2018, I sell the new widebelt sanding machine Casadei Libra 35 RCT 95 Year 2018. Configuration: Steel cylinder Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 950mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Fsdpfxezkb Nxo Aa Ropk Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was working on showroom. Available immediately. Including full documentation and CE.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Caustic soda dosing machine Drautz RD 100 Compact and robust design One-person operation and easy cleaning Dual-curtain caustic soda application With stripping device Connection 400V, 16A-CEE plug Used machine With warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Fpsdpfxsxmrbdj Aa Rek Maintenance contract Service package Salting Delivery service Spare parts box for added security Training & commissioning Visit our wide selection!

Condition: used, Technical specifications: Max. grinding width: 300 mm Grinding unit with shoe Pneumatic belt tensioning Working pressure: 6 bar Work table length: 1250 mm Fodjziagyjpfx Aa Rspk Built-in fan Fan motor power: 0.7 kW Motor power: 5 kW Overall dimensions: Length: 1300 mm Width: 850 mm Height: 1300 mm

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Fodpfx Ajy A Sq Tea Repk Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Condition: good (used), Code: 0021 Brand: BOHR - AUSTRIA Model: 150/330 Fpodpfxoi Art Es Aa Rjk Sanding pad for belt sanding machine Universal sanding pad for belt sanders in graphite for solid wood and veneer - mm 330 x 150 Overall dimensions mm 330 x 150 x 100 h Weight kg 4

Condition: good (used), Year of construction: 2006, Used grinding machine from Kraku (DE) Type: BTS 150 Belt width: 150 mm Circular grinder with a diameter of 300 mm Fpjdpfx Aswc Nl Usa Rsk

Condition: ready for operation (used), maximum belt width 240mm mechanical oscillation unit spacing 200-1290mm Fsdpfxozhuv Hs Aa Repk screw-type belt tensioning star/delta starter manual adjustment of unit spacing cast iron housing dimensions of the side table 920x350mm two 7.5kW motors

Condition: good (used), Year of construction: 1992, Single-piece sanding machine Fpodpfx Aswyda Usa Rsk sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)