Used Schaublin 102 Vm for sale (56)

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Hjdpfebxkl Tox Abronh Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: good (used), Center height 102 mm Distance between centers 450 mm Leit.- / feed shaft Collets W20 available Speed: about 210 - 3000 U / min reducer gear Left.- Rightrunning 2-Multistage drive L x B x H: approx 1760 x 595 x 1230 mm Weight: 650 Kg Hnedpfx Abocug H Sersh Different "Schaublin 102" models in stock!

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Hodpfsw N Rh Asx Abrsnh Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm Hjdpewvq Tmefx Abrenh >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: used, Schaublin 102-N80 Swiss precision lathe Technical details: Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories/options: - 3-jaw chuck with jaws - 4-jaw chuck with jaws - tool holders - Schaublin collets from 0,5mm Hjdpfx Asxxavgsbrjnh Under power in our warehouse.

Condition: used, centre height 102 mm Hedpfx Aswbi Hpebrjnh centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Hnodpfx Absw Iq Umorjh Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Hedpfx Ajcpznhjbronh Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: good (used), Right & left rotation with knee reverse switch 2 steps Vario Headstock with reduction gearing Cross slide with 90 mm stroke Tripan steel holder 1 set of W20 collets 2 drawers lamp 380 VAC Centre distance: 350 mm Center height: 102 mm Turning-Ø over bed: 200 mm Turning-Ø over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 - 3000 rpm / infinitely variable Tailstock quill: MK 2 Weight: approx. 500 kg Hedjd Htvdspfx Abrjnh Machine size W x D x H: approx. 1300 x 600 x 1300 mm Different "Schaublin 102" models in stock!

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Hedpfx Abscuhvuorsnh Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: excellent (used), The used SCHAUBLIN 120 VM precision parallel lathe is a medium/small sized Swiss manual lathe, 120mm center height, 600mm center distance, 25mm spindle hole. Hedpfxswqxcfs Abronh Complete machine with feeds and various equipment, already complete with electrical panel and safety devices; equipment and conditions as per photo.

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] Hnsdpfx Abjw Ihttsreh - Max. diameter on bench : 200 [mm] - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Hjdpfoyhyt Ajx Abrjnh

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : - 1 workbench NEW 2000x800 mm with Urphen platte blue 2000x800x50 mm      1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bed for overhead drive 1 W-20 headstock without gear reduction and drawbar, revised 1 revised screw-operated carriage 1 revised aligned tailstock 1 motor 380V/50Hz/3ph. 2 speed 1 set of collets W20 1 chuck 2x3 jaws Ø 100 mm on w-20 flange 1 new set of Multifix tool holders including - 1 turret Multifix A with AG20 stud Hodpfxjdr R Tco Abrenh - 3 tool holders AD1675 - 1 bar holder AH2085 1 self-tightening drill chuck cap 1-13 mm on MT2 stud 1 male center MT2 OPTION 1 used tensioner with new belt CHF 500 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: good (used), Step chucks, precision chucks, bell-shaped collets, collet sleeves, collets, tool holders, tool holders, collet sleeves Hnjdpfx Abeykikljroh -Manufacturer: Schaublin, Step chuck precision chuck 3 pieces -Photography: see photos -Size: 83 to 110 mm, see photo parts list -Dimensions: Ø 120 x 120 mm -Submission/Price: complete -Transport dimensions: 360/120/H120 mm -Weight: 4.2 kg

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck 6 pieces -Photography: see photos -Size: 51 to 79 mm, see photo parts list Hedjykikfspfx Abrenh -Dimensions: Ø 88 x 120 mm -Submission/Price: complete -Transport dimensions: 270/180/H125 mm -Weight: 6.6 kg

Condition: good (used), Step chuck, precision chuck, bell pliers Hjdpfx Aoykii Ujbrenh -Manufacturer: Schaublin, Step chuck precision chuck 7 pieces -Photography: see photos -Size: 21 to 50 mm, see photo parts list -Dimensions: Ø 56 x 120 mm -Submission/Price: complete -Transport dimensions: 230/115/H120 mm -Weight: 4 kg

Condition: good (used), Draw tube, draw rod for step chucks, precision chucks, quick-release chucks, collet sleeves, collet chucks, tool holders, tool holders, collet sleeves -Manufacturer: Schaublin, pull rod for quick-release chucks -Recording: M24 -Dimensions: see photos -Dimensions: Ø 150 x 525 mm Hnodpfx Absykii Iorsh -Weight: 3.3 kg

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves Hnedsykiizopfx Abrjh -Manufacturer: Schaublin, Step Collet Ring Chuck -Hole: Ø 25 mm (see photos) -Size: 22 to 87 mm -Dimensions: Ø 96 x 110 mm -Weight: 1.1 kg

Condition: good (used), Step chuck, precision chuck, bell chuck, step collet, ring chuck, collet sleeves, collet, tool holder, tool holder, collet sleeves -Manufacturer: Schaublin, Step chuck precision chuck mount MK6 Hnjdpfx Aboyizh Toroh -Size: 81 to 106 (see photos) -Overall dimensions: Ø 131 x 175 mm -Weight: 5.3 kg

Condition: used, Tip height 125 mm Tip width 500 mm speed 45 - 3000 rpm feed rate 4 - 260 mm/min spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over cross slide 120 mm top slide travel 100 mm Hjdpjbzlglsfx Abrenh cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Condition: excellent (used), - Steel holder Multifix "B - Quick release collet device center height 150 mm center width 630 mm spindle bore 40 mm speed (stepless) 55 - 3000 rpm feed rate 0,05 - 0,35 mm/rev inner taper spindle / tailstock MK 5 / MK 3 Hodpshmkh Tjfx Abronh turning diameter over cross slide 177 mm turning diameter over bed 340 mm power 4.45 kW dimension 1730 x 970 x 1300 mm Weight 1250 kg

Condition: excellent (used), Center height 125 mm Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Hedpfxetzxh Ts Abrjnh Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg

Year of construction: 1998, condition: ready for operation (used), Connected load: 24kW. Hnedpfx Ajng E Tyebrsh

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, total height: 1,840 mm, overall weight: 3,040 kg, controller manufacturer: FANUC, controller model: 18i-TB, number of axes: 4, This 4-axis Schaublin 140R CNC horizontal turning machine was manufactured in 2008. It features a CNC Fanuc 18i-TB control, a maximum turning diameter of 300 mm, and a spindle speed range of 50 – 5,000 rpm. Equipped with a Y-axis and sub-spindle, it offers a turret with 12 driven tool stations. If you are looking to get high-quality turning capabilities, consider the Schaublin 140R CNC machine we have for sale. Contact us for more information. Additional equipment • Machine supplied with manuals and CE conformity declaration Machine Benefits Technical Machine Benefits • Driven tool stations: 12 • Max tool size: 20 x 20 mm • Driven tool speed: 30 – 6000 rpm • Tailstock a2-3 • Possibility to mount 3-jaw chuck: yes • Recommended max turning diameter: 200 mm • Coolant system: tank capacity 180 l, pump capacity 20 l/min, pump pressure 6 bar • Max turning diameter: 300 mm • Recommended max turning diameter: 250 mm • Equipped with y-axis and sub-spindle Extra Information Hodpfjyalqgjx Abrenh Machine still under power Dimensions Machine Depth 2650 mm