Used Schröder Ducter 1500 for sale (63)

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm Bsdsu Tp N Djpfx Aknswu - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min Bjdpfx Aexyln Roknowu cutting angle 2.70 Grad distance between columns 1540 mm work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, Schröder injector with 40 needles, workshop tested, functioning Bwodpfx Aeyi Sggoknou

Condition: excellent (used), Schröder ASK segmented folding machine The machine is equipped with: ✅ a foot pedal for single-operator control ✅ segments in the upper beam, lower beam, and bending beam ✅ segment height of the upper beam: 11 cm ✅ bending capacity: 1 mm steel sheet Condition: • with new dampers in the upper and bending beams • very good technical condition • very good visual condition • Immediately available, no lead time • Weight: approx. 500 kg Inspection and test run possible by appointment. Bwsdpfxey Dz Sis Aknou

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 29,943 h, machine/vehicle number: 220495, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller model: POS 2000, working width: 3,020 mm, lower beam adjustment: 250 mm, folding beam adjustment: 80 mm, sheet thickness (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, overall weight: 4,230 kg, total length: 4,275 mm, total width: 805 mm, total height: 1,425 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2025, Equipment: documentation/manual, emergency stop, foot remote control, SCHRODER MAK3 3000x4.0 Mechanical Press Brake Year of manufacture: 2013 Bedpfx Akezkgz Hsnewu Capacity: 400N/mm2, 4mm CNC control: POS2000 Back gauge: 10-1000mm Work table: 3200mm, U-shaped Machine serviced by the manufacturer's service department Machine is in good working order and has been in continuous use Machine is being sold due to a change in the machine park Touchscreen display is not functioning, control via mouse only

Condition: good (used), Year of construction: 2010, sheet width 2020 mm plate thickness 3.0 mm thickness at "Niro-steel" 2.0 mm Bsdpfjz Icy Rsx Aknowu bending angle max. 135 ° stroke of upper beam 250 mm Swing beam adjustment 80.0 mm Control POS 2000 back stop - adjustable ca. 1.000 mm total power requirement 6.0 kW weight of the machine ca. 3775 kg dimensions of the machine ca. 3850 x 2250 x 2250 mm Original price at the time: approx. 70.000 Machine from a maintenance workshop Special price upon request (!) Features: - Robust, electric-motor-driven CNC swivel bending machine - dynamic, high-performance drive motors - SCHRÃ?DER "POS 200" CNC control unit * touchscreen control panel * fast programming of individual parts * programming of bending sequences * Tool and bending program library * Graphical and numerical display - Swiveling control panel, front right - CNC electric-motor-driven material/backgauge * With rear sheet metal support surface (stainless steel) - CNC electric-motor-driven lower rail adjustment - 1x freely movable dual foot switch - Bending/insert tools * 1x upper cutting rail * 1x lower bending rail -- 10 mm * 1x lower bending rail -- 25 mm - User manual (PDF)

Condition: good (used), functionality: fully functional, Year of construction: 2012, Motorized Swivel Bending Machine Mfg. SCHRÖDER Type: MAK 4 EVO 3200/6.0 UD Year: 2012 Technical Data Manufacturer: SCHRÖDER Type: MAK 4 EVO 3200/6 UD Year of manufacture: 2012 Working length: 3200 mm Capacity: 6 mm Upper die stroke: 850 mm Upper die geometry: 180° Bending center adjustment: 100 mm Dimensions: approx. L 6.45 x W 2.65 x H 2.75 m Machine weight: approx. 20.6 t Accessory weight: approx. 3.4 t Equipment - Up’n Down bending die, automatically controlled by POS 3000 - Upper die tool clamping, hydraulic - Bending die tool clamping, hydraulic Bwodjzrvdgopfx Aknsu - Motorized central crowning - Motorized bending die adjustment, program-controlled - Bending center optimization via bending center adjustment - Foot switch - Protection of operation from the rear, controlled by a light curtain and safety PLC - Safety package EVOLUTION UD with tool changer incl. safety fence - Speed optimizer Z-axis drive (max. axis speed: 120 mm/s) Control system: POS 3000-3D graphic control View of product and machine in 3D – display Radius-Step-Bending function Stop system Positioning stop 10 - 3400 mm in U-shape with 4 sectors (850/1700/2550/3400), Panel for individual positioning of the control, pneumatic lowering of the stop fingers, steel balls in the support table. Angle stop left and right 1500 mm. The support plates are divided and can be removed individually to create the necessary space for existing counter-bends. - 2 pneumatically lowerable angle stops mounted on the frame - Front stop function of the bending die for accommodating bending rail finger segments incl. 2 finger segments matching the bending rail Fully automatic tool changer Tool changing portal for upper die tools with hydraulic tool clamping (total 7 axes) for maximum upper die tool height of 400 mm, two asynchronously movable tool changers each with three gripping units Upper die tool Tools WZS 2000, approx. 1000 N/mm2 tensile strength • Tool set for automatic tool changer, upper die Goosefoot set h= 180 mm incl. corner pieces left and right. Bending die tools Tool system for the bending die WZS 3000, approx. 1000 N/mm2 tensile strength Bending rail "A", segmented, stepped, b= 15 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm Bending rail "A", segmented, stepped, b= 20 mm, h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 20 mm •Bending rail "A", segmented, b= 30 mm h= 101 mm No. 1 - L = 2 x 25, 30, 35, 40, 45, 50 = 225 mm No. 2 - L = 14 x 200 mm 2 finger segments for front stop matching bending rail b= 30 mm Lower die tools Lower die rail with recesses segmented, same radius as upper die tool b= 117 mm h= 40 mm Total length 3.240 mm, divided into 4 x 500, 2 x 620 mm All information is without guarantee. A demonstration under power is possible at any time by arrangement.

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park Bedpfezi Uq Hex Aknjwu

Condition: ready for operation (used), Year of construction: 1982, Available immediately ex-works: Plate shear Schröder Bwedpfx Ajz Hu Eiekneu Capacity: 2500 x 4 mm Cutting length: 2550 mm Material thickness up to 4 mm Electric back gauge: 1000 mm Drive: 5.5 kW Weight: 3.5 tons Price: EUR 3,500.00 plus VAT, ex-works

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Schröder Powerbend Universal Swivel Bending Machine 2000 x 4 mm Manufacturer: Schröder Group Type: Powerbend Universal 2000 x 4 mm Year of manufacture: 2019 Condition: used, like new Further information available upon request. Bwsdpfx Akjzlx Izonsu

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Bwedpszl A Rajfx Akneu Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Year of construction: 2016, machine/vehicle number: 12300379, Offer 26209 Technical data: - max. working width 1020 mm - max. material thickness 2.5 mm - cutting angle 2.4 ° - stroke rate up to 34 1/min - manual rear stop with digital position display 500 mm - table height 850 mm - front angle stop - front extendable material support - pneumatically assisted sheet metal lifting with sheet metal discharge to the front - electric foot pedal - tapping – single stroke can be preselected Bodpfx Akozrk Rusnowu - rear safety guard - mounted on a steel plate - pneumatic connection 6 bar - drive 400 V / 3 kW - space requirement approx. W 2100 x H 1150 x D 2200 mm - weight approx. 1400 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 40 h, Guillotine shear with a maximum of 40 operating hours, Cutting capacity: 3.5 mm sheet thickness, tensile strength 200 N, Cutting capacity: 2.5 mm sheet thickness, tensile strength 400 N, Cutting capacity: 1.65 mm sheet thickness, tensile strength 600 N (V2A), Used only for 1.5 mm coated sheets, Hold-down opening: 25 mm (can be reset to factory spec), Strokes per minute: 56, Light barrier, Cutting angle: 2.4°, Upper blade has a 60° pointed grind for use with plastic-coated sheets. The upper blade is non-reversible. Rated power: 4.0 kVA Weight: 860 kg. Bjdpfjxal Uwox Aknewu

Condition: good (used), AK 200: The machine is equipped with: ✅ a foot pedal ✅ a shear bar ✅ a 10mm clamping bar ✅ Performance: 1mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 750kg HS 200 The machine is equipped with: ✅ a back gauge ✅ extendable sheet metal support ✅ Performance: 1.25mm steel sheet (also suitable for aluminum, copper, and zinc) ✅ Weight: approx. 650kg Bwedpfsz Dumhjx Aknou Condition: • good technical condition • good optical condition

Condition: good (used), Swivel bending machine, a press brake from the renowned manufacturer Schröder. Bwedpfx Akjz Ad Rvenou Capacity: 3mm steel, aluminum, etc., and more. Working width: approximately 2.04m. Weight: approximately 2.4 tons. Easy to operate. Manual and foot controls. Optionally, a segmented upper beam or a back gauge is available. The machine comes from private use. Loading with a forklift is no problem. On-site testing is, of course, possible. You will receive an invoice according to §25a UStG – the VAT is included in the invoice amount. Subject to differential taxation. Optionally, a matching plate shear, 2m, 3mm, is available – a set price is also possible. Other equipment and tools for sheet metal processing are available.

Year of construction: 2006, operating hours: 40 h, condition: used, functionality: fully functional, machine/vehicle number: Seriennummer: 4292-1-197652, Gerstenberg Schröder Consistator MD 250 L-S For sale is a used Gerstenberg Schröder Consistator MD 250 L-S scraped surface heat exchanger from a production facility. The unit was used for processing vegetable juice and is being sold due to process changes and restructuring. Technical Data Manufacturer: Gerstenberg Schröder Type: Consistator MD 250 L-S Year of Construction: 2006 Serial Number: 4292-1-197652 CE Marking: CE 0038 Design: Scraped Surface Heat Exchanger Product Side Medium: Vegetable juice Pressure Range: 0 / 35 bar Test Pressure: 59 bar Max. Temperature: 150 °C Volume: 25 liters Bedpfx Aszwwibjknswu Media Side Medium: Steam Pressure Range: 0 / 13 bar Test Pressure: 28 bar Max. Temperature: 165 °C Volume: 75 liters Condition The machine is used and comes from an industrial production environment. Inspection is possible by prior appointment. Location 71106 Magstadt, Germany Sale Sale from location / Ex Works. Loading and transport are to be arranged by the buyer, or can be arranged upon agreement. If you are interested or have any questions, further information, pictures or details can be provided.

Condition: good (used), functionality: fully functional, Year of construction: 2013, Used swivel bending machine by Schroder Model: SPB Evo 3200 4.0 UD Capacity: 3200 x 4 mm Upward and downward bending Year of manufacture: 2013 POS 3000 CNC control (graphical) Hydraulic upper clamping CNC backgauge with 4 finger types (standard, clamping, side clamping) Bwsdeyhdz Tspfx Aknsu Additional lower blade

Condition: excellent (used), Electric Schröder panel shear – in top condition – ready for immediate use – retains its value. For sale is a Schröder panel shear with a manual back gauge, in good technical and visual condition. 2000mm x 4mm. Includes loading. Sale: • Machine price, net • You will receive a proper invoice with VAT shown. • Shipping or freight forwarding possible (upon request) • Inspection possible by appointment Bjdpfx Akjzq Rwlenowu Please note: If you are interested, please contact us by phone. Phone:

Condition: good (used), functionality: fully functional, Year of construction: 2022, Electric bending machine in good condition, with automatic back gauge. Specifications: Model: SCHRÖDER MAKU Bwodoy Ucycspfx Aknou Year: 2022 Made in: Germany Working length: 3,200 mm Bending thickness: 1.5 mm Bending beam tooling: 10 and 25 mm Controller: Classic bend Motor: 2.5 kVA Weight: 2.7 tons If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2000, MACHINE SCHROEDER PAKUE 6 Length 3.0 m Bodex Hi S Nopfx Aknowu

Condition: used, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2014, next inspection (TÜV): 05/2021, loading space length: 13,240 mm, loading space width: 2,490 mm, loading space height: 3,500 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schröder Wiesmoor ST 11/24 P4-13.5 Beverage Trailer Lowbed Vehicle number: 3901 Technical Data: * SP: 05/2021 * MOT: 11/2021 * Permissible total weight: 35,000 kg * Unladen weight: 6,900 kg * Tyres: 385/55R22.5 * 3 axles (BPW) * Axle load per axle: 8,000 kg * Support load: 11,000 kg Equipment: * Anti-lock Braking System (ABS) * Raiseable roof * Air suspension Bwjdpey Hblbefx Aknou * 2 lift axles * Lowbed * 3 loading areas: - Loading area 1: 3.34 m x 2.49 m - Loading area 2: 3.30 m x 3.50 m - Loading area 3: 6.60 m x 2.68 m Subject to errors and prior sale.

Condition: used, maximum load weight: 28,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2014, next inspection (TÜV): 11/2021, loading space length: 13,240 mm, loading space width: 2,490 mm, loading space height: 3,500 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Schröder Wiesmoor ST 11/24 P4-13.5 Low Bed Beverage Trailer Bwedpfey Hbk Rsx Akneu Vehicle number 3902 Technical specifications: * SP: 05/2021 * Main inspection (MOT): 11/2021 * Gross vehicle weight: 35,000 kg * Unladen weight: 6,900 kg * Tyres: 385/55R22.5 * 3 axles (BPW) * Axle load per axle: 8,000 kg * Support load: 11,000 kg Equipment: * Anti-lock Braking System (ABS) * Liftable roof * Air suspension * 2 lift axles * Low bed * 3 loading areas: - Loading area 1: 3.34 m x 2.49 m - Loading area 2: 3.30 m x 3.50 m - Loading area 3: 6.60 m x 2.68 m Subject to errors and prior sale

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Bwjdpjxn Dhlsfx Aknsu Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg Bwjdpfezn Ahdex Akneu range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Item No. 24215 Technical data: Bwedetpnldepfx Aknsu - max. working width 3040 mm - max. material thickness 4 mm - manual adjustment of cutting angle - stroke rate up to 34 1/min - rear stop with positioning control Pos100, 750 mm - front angle stop - 2 front support arms - rear guard with light barrier - electric foot switch - pneumatic connection 6 bar - power supply 400 V - space required without support arms approx. W 4000 x H 1400 x D 2100 mm - weight approx. 4700 kg