Guillotine shear

SCHRÖDER-FASTI

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Hedjzi Ezvjpfx Ac Ter Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. Hedpfx Acezl A Rae Ter The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Hodjzi Uq Hjpfx Ac Tsr Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: like new (used), FASTI Type 63x1.5 Beading Machine / Like new, almost unused -CE marking Hedpfx Ajziviksc Ter -Upper beading roller, hydraulically adjustable -Control panel -Various beading tools -Hydraulic unit -Documentation Dimensions: L x W x H / Weight 1200 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display Hedpfx Asza D Eioc Tsr - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Roll bending machine FASTI - Type 2040x2mm - GS certification - Roller diameter 105mm - Max. sheet thickness over the entire length 2mm - Foot switch - Safety device Hsdjzb Emdspfx Ac Tjr Dimensions: L x W x H 3 x 1.1 x 1.4 meters / Weight: 1500 kg Errors and omissions excepted.

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Hjdpfsy Twfqsx Ac Ter Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Hodpjx Eiw Tofx Ac Tjr