Welding turntable,Turntable,Positioner

Sideros,Pfaff,Protec SHD 1000 F

Condition: new, Year of construction: 2025, functionality: fully functional, Blasting container for blasting with glass beads, ceramics, corundum, hard cast gravel, garnet sand, etc. Blasting container with full-surface screw conveyor floor and real blasting agent preparation. No sweeping, vacuuming and shoveling of abrasive in the blast room during the blasting of your workpieces thanks to our circulation system. Blast media cleaner air separator 4-fold adjustable air volume/ flow speed/ suction proximity to the blast media/ blast media layer height adjustment. Electric vibrating screen for permanent coarse separation. Bucket elevator with trapezoidal threaded spindle for belt tensioning and speed monitoring. Container lining with a 70shore 4mm fabric rubber for a service life of up to 30 years with proper use. Container can be opened completely to the side for easy forklift loading. Container can be upgraded with a crane overhead hatch, floor reinforcement, lateral blast room extension. When blasting stainless steel, the container can be upgraded with a real magnetic drawer or a magnetic drum separator as well as stainless steel grating. Filter system with easy maintenance doors, big bag dust bagging, H13/14 secondary filter and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Ihsdpfx Ajuwlzysbreu Special warranty of 5 years on the essential parts of the blasting system included. Safety equipment: Door/gate limit switch, dead man's control, emergency lighting, blast room viewing window, emergency stop in the blast room and on the outside of the control cabinet, pressure vessel quick ventilation

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg Ihodpfxjv Rbivj Abrju - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Condition: new, original Siegmund welding table perforated plate octagonal 2D or 3D 1200 x 200 with 28 mm hole 514 kg, diameter 1300 mm plasma nitrided Iedpfx Abjt Sk Ndsrehu original price 8900.-€ in combination with positioner half price sold only in combination with positioner Hole holder 8 hole 500 x 500 diameter 18mm (see picture)

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Ihodpjd Ixadofx Abrju Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Iodpfx Aoxqyxljbrshu Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm Ihjdjt Ea Tfjpfx Abrou - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Isdod A Etuopfx Abrshu

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a drilling unit that moves longitudinally. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit with longitudinal movement (X-axis), adjustment range 0 - 15,000 mm, and an automatic tool changer with HSK A80 interface for 6 tool positions. Thanks to the 19 kW drill spindle drive, the machine is suitable for use with carbide drilling tools. Technical details: • Support for profiled and flat steel with guide rail and fixed table, total length 15 m • Mobile drilling unit for longitudinal positioning along workpieces • Horizontal drilling head with single drill spindle • Additional tool storage in the X-axis direction • Clamping system for securing materials Isdpfx Abov Iamzjrehu • Position detection device • Maximum profile size: 1200 x 1200 mm • Number of drill spindles: 1 • Drilling diameter: 5 - 40 mm • Tapping: M6 - M30 • Drill spindle speed: 180 - 3000 rpm • Holder: HSK A 80 • Tool changer: 1 x 6 For more information, please contact us.

Condition: good (used), Year of construction: 1985, Megamat carousel Type: 130-225-42 Device no.: 4492 Year: 1985 Rack height: approx. 5410 mm Unit width: approx. 2670 mm Unit depth: approx. 1300 mm + 300 mm table top Number of shelves: 42 Shelf width: approx. 2155 mm Shelf depth: approx. 410 mm Shelf height: approx. 200 mm Ihedpevc Hk Nofx Abrju Shelf load: 100 kg Total load: 4,200 kg Color: beige/green

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. Isdpfx Abeg Urz Horjhu The new generation APSI are already in stock.