Used Setting Table for sale (23,441)

Condition: excellent (used), functionality: fully functional, Equipment: foot remote control, Excellent condition Rotating device with adjustable height, featuring joints on both sides (the component does not need to be aligned due to the joints) Motor-driven, with foot pedal, adjustable clamping range for your component Dimensions: Minimum height 550mm, maximum height 1300mm Mounting plate 440 x 300mm Base dimensions per side approximately 1600mm x 1200mm Optionally, a perforated table or a component of any size can be clamped 3000 kg load capacity, motor-braked One side driven, the other side rotates passively. Hodpfx Asz Hvurek Uenu

Condition: new, Year of construction: 2026, functionality: fully functional, Protec Container Rotating Device, 40-ton load capacity, complete set, new with warranty Includes foot and hand remote control with digital display Component diameter: 600 - 4200 mm Speed, continuously variable: 100 - 1000 mm/min Dual drive motor power: 2 x 1.1 kW Dual drive Hnedpfez Hvwmsx Ak Usu Drive wheel, PU, diameter 400 mm Drive wheel width approx. 200 mm

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: DC09 72A/02-11, General information Field of application: Construction Weights Empty weight: 5.000 kg Functional Generator capacity: 287 kVA Dimensions of cargo space: 380 x 220 x 249 cm CE mark: yes Other information Fuel consumption: 189 g/kWh Generator: Mecc alte Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Hsdozn Euyopfx Ak Uenu Water tank volume: 1200 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = -Noise rating: 55 dB at 7m

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Well-maintained cabinet machine for band saws, new model. Includes a clamping device for band saws. Used very little. Hodpfoz R S E Rsx Ak Usnu Photos show the original condition.

Condition: like new (used), Year of construction: 2024, Welding positioner table for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. Hnsdpjz Rxvuofx Ak Usu

Condition: used, Year of construction: 2010, operating hours: 4,772 h, machine/vehicle number: G2W00152, fuel type: diesel, motor manufacturer: Caterpillar 3516B, General information Field of application: Construction Weights Empty weight: 21.000 kg Hnjdpfxoz N Rvds Ak Ueu Functional Generator capacity: 2.250 kVA Dimensions of cargo space: 1219 x 243 x 290 cm Other information Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 4500 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Year of construction: 2011, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1613030303, Saw blade diameter 280 mm Saw blade speed 3,200 rpm Power supply 230/400 V, 3~, 50 Hz Power output 1.05 kW Length 650 mm, depth 750 mm, height 1,300 mm, weight 130 kg Hnedpfx Akjz S Nayj Uju Accuracy is achieved by cutting from below Wide pivoting range of up to 0° to the right and up to 45° to the left The special pivoting mechanism with integrated turn table enables working from the front at any angle position The workpiece stop is adjustable to allow optimal use of the saw blade capacity for wide and flat profiles Manual material clamping unit (vertical) Machine is ready for operation, saw blade was sharpened

Condition: used, Year of construction: 1992, Technical details: Hnodpsu Idqbsfx Ak Uou spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine approx.LxWxH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Hnodou Ngrqjpfx Ak Uou Coolant tank with pump and feed *

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm * Hodpou Nknpofx Ak Ujnu

Condition: used, Year of construction: 2004, Technical details: table length: 4000 mm table width: 2000 mm Hnodpfx Akju Nkxue Uou Max. sheet thickness: 100 mm table height over floor: ca. 860 mm total wight: 5,6 + 0,5 t dimensions LxWxH: 4,0 x 2,2 x 0,1 m Welding table / Pricing 0.50 EUR/kg with substructure and 6 base stands *

Condition: used, Technical details: flow rate: 2,4 m³/min current- max.: 6,6 / 11,5 A voltage: 380 / 220 V protection class: IP54 frequency: 50 Hz total power requirement: 3 kW weight of the machine approx.: 30 kg dimensions L x W x H: 1,o x 0,8 x 0,2 m Mehrstufige Hochleistungspumpe. Further characteristics: -Insertion depth= 320mm Hsdpou Nzv Refx Ak Uenu -Large cover plate 360mm x 280mm - Motor RpM: 2870 RpM *

Condition: used, Technical details: tank capacity: 4,2 l filter: Inhalt/volume ca. 8,0 l REFUELING PUMP; GASOLINE PUMP WITH ENGINE; FUEL PUMP Comes from military stock. The pump is gasoline powered. It refuels fuel into fuel tanks e.g. car; truck. Mix gasoline with two-stroke engine oil in the ratio 25:1. There are 4 pieces of pumps for sale. With 2 nozzles! Hedpfou Nzwhex Ak Usnu *

Condition: used, Technical details: dimensions electric cabinet LxWxH: 1,6x0,6x2,0 m connected load: 2x11 kW connected load: 2x15 kW electric cabinet - revolution regulator application: - pump - rack system with stepless rpm adjustment application area: - heating/air conditioning /climate , water supply , heat exchanger , recycling plants , fountains , pump drive via AC motor - control device 89 MA relais output 220V / 1A Hnsdsu N Eytopfx Ak Usu - display via control unit with micro computer - equipped with differential pressure indicator i.D. *

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm Hsdpfx Aksfyadbo Ujnu - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: used, machine/vehicle number: 6742, Graduation in degrees, minutes, and seconds Diameter: 400 mm Hsdpfx Asbzfqdsk Uenu Dimensions: L 500 x W 650 x H 160 mm Weight: 70 kg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2697 € 2000 x 1000 mm 3000 kg 348 kg 100 mm 12 mm 16 mm THIS MODEL FORMS THE BASIS OF THE ENTIRE SYSTEM. IT CAN BE EXTENDED ON ALL FIVE SIDES AS REQUIRED. Our tables are characterised by the high degree of hardness with our Cr75M+ hard chrome plating, the very high degree of accuracy of +/- 0.05 mm on the entire table surface and the tolerances of the hole diameters of the entire hole pattern. 3D standard welding and clamping table, Hjdpsyq Srrjfx Ak Usnu 2000 x 1000 x 100 mm with Cr75M+ hard chrome plating Table system: 16 mm Material thickness: 12 mm Including table substructure and standard table legs * S355J2+N with Cr75M+ hard chrome plating * Hole: 16 mm, material thickness: 12 mm * Including coated table substructure * Side panel 100 mm with 2-row hole pattern and 25 mm hole spacing * Table top with 2-sided fine scaling and 50 x 50 mm grid line * Rounded edges and holes * Solid standard table legs with load capacity 1 tonne per leg; 500 kg per leg for castor model

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight 1500 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 1500 mm • Height 200 mm • Weight 1500 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table Hnsdpfx Akeymf Rts Usu

Condition: used, ID43744 Welding machines Brand: Invertec Hodswhd Nfopfx Ak Uonu Type: V270T Lincoln Electric Including all necessary cables

Condition: used, This listing is for the Mitutoyo BM1-8-1B/PD Gauge block set The unit is in full working condition and is ready for immediate release Hnedpsxv A Rzsfx Ak Uju This Mitutoyo 81-piece rectangular steel gauge block set is crafted from high-chromium alloy steel and features an ultra-micro-lapped surface finish for precision and durability. Carefully heat treated and stress-relieved, these blocks provide exceptional wear resistance, stability, and wringing performance, ideal for high-precision calibration, inspection, and tooling environments. Mitutoyo gauge blocks meet or exceed all internationally recognized standards (ASME, ISO, JIS), with flatness, parallelism, and surface finish that often surpass government specifications

Condition: new, Year of construction: 2026, load capacity: 3,000 kg, Top quality made from high-strength structural steel Q355, including plasma nitriding and scaling. 3D perforated table 2400 x 1200 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Machined flat, very robust, weight approx. 950 kg. With table leg adjustable in 4 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. Hjdpfxjx Nih Nj Ak Usnu

Condition: new, Catalog number H0548 - New machine, in stock - CE certificate - Cutting length: 3200mm - Cutting width: 1150mm - Cutting height at 90°/45°: 80/55mm - Max. blade diameter: 305mm - Blade adjustable up/down and at a 45-degree angle - Scoring blade diameter: 120 x 20 mm Hsdpfx Aszw Dnqok Ujnu - Main saw speed: 4500, 5500 rpm - Scoring blade speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring blade motor: 1.1 kW - Carriage guidance on steel bars Overall dimensions: - Length: 3220mm - Width: 3150mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Rip fence for angled cutting - Main blade and scoring blade included Net price: 20320 PLN Net price: 4726 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices are subject to change in case of significant exchange rate fluctuations)

Year of construction: 2022, condition: used, Used Equipment Year of Manufacture: 2022 Features and Technical Specifications: - Allows one person to effortlessly load panels onto the platform frame and swivel it from the vertical to the horizontal position - For use with format or panel cutting saws, on a shelf, or while moving between stations - Swivel frame with two-position locking mechanism in vertical and horizontal positions - Table height can be adjusted to the desired working height using a foot-operated hydraulic system - Design featuring a smooth-operating scissor mechanism ensures that the platform can be raised and lowered absolutely parallel - Sturdy support rollers on the lower support and multiple all-directional casters ensure smooth, ergonomic operation - Counterweight on the lower frame for secure footing and maximum stability when moving the table - Unrestricted access to the workstation table’s control pedal - Easy to maneuver thanks to four swivel casters with a diameter of 125 mm - Two casters are equipped with brakes - The swivel frame can be mounted on and removed from the platform base frame in just a few simple steps - Meets the safety criteria of EN 1570-1 - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm; length: 1500 mm - Casters: 125 mm in diameter Dimensions: 1,200 x 740 x 400 mm Hnsdpfx Akszk Nqdj Uju Weight: approx. 80 kg Swivel frame weight: 10 kg Availability: available shortly Storage location: 63934 Röllbach

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Equipment: foot remote control, Welding positioner, tank rotating device, 10,000 kg load capacity Hedpfx Aok Admgjk Uonu Synchronous double drive With hand and foot remote control, speed digital display Diameter from 160 mm to 4000 mm Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable, 100 - 1000 mm/min Motor AC 380 V

Condition: used, machine/vehicle number: 008564, X axis working area: 2465 mm Y axis working area: 1260 mm Hnjdpfx Aezvwh Iok Uou Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16