Used Shark 281 Ccs for sale (4,757)

Condition: good (used), Year of construction: 2019, functionality: fully functional, A complete shredding system is for sale. The machine can be inspected at any time. Fgjdpfxez Ixfie Am Eei

Condition: defective spare-parts repository (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, REF: MM6481 2003 Weber CCS-602 high-speed slicer for the industrial slicing of products such as meats, sausage and cheese. Sold for spares or repairs. Technical specification: Fsdjzvx Dkopfx Am Esgi ✅ Manufacturer - Weber Maschinenbau GmbH ✅ Model - CCS-602 ✅ Serial number - 371 ✅ Year of manufacture - 2003 ✅ Knife - 460mm diameter circular knife ✅ Speed / output - up to 600 slices per minute ✅ Maximum product length - 1,200mm ✅ Cutting thickness - 0.1mm to 50mm (depending on product) ✅ Electrical requirements - 400V / 50Hz / 3 phase ✅ Power - 10 kW ✅ Air requirements - 10 bar ✅ Overall dimensions - 2200mm long x 1250mm wide x 2150mm high Condition: Needs repair for an electrical fault. When first powered up, the screen lit up but would not move from the home page. When it was next powered up, there was a noise and some smoke from the electrical panel. It has not been powered up since.

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: limited functionality, Equipment: lighting, This machine has served us well in our workshop for a long time. Unfortunately, the electronics appear to be defective. Therefore, we had to purchase a new one. Available for self-collection in Krostitz. Fgodpfxez Dgmms Am Eei

Condition: excellent (used), Year of construction: 2009, operating hours: 10,720 h, functionality: fully functional, Willibald EP 5500 Shark in excellent condition and ready for work. Fgodpfx Amey Iwgke Eei

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick Fgodpfx Amo Agcl Ej Esi - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M60L/8583, Offer Number: M60L/8583 Machinetype: screw washing machine Make: MOC DANNER Type: Shark 100 Fodpfxewi Swyo Am Esgi Constr. year: 2014 capacity: 250 Kg setting plane: output: Location: In our warehouse

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Fjdpfx Aozi Ackjm Eegi Machine weight: 475 kg

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws Fjdpfx Amezkbn Uj Esgi - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: used, Year of construction: 2007, machine/vehicle number: CCS 904-7096, total length: 4,900 mm, total width: 2,000 mm, total height: 2,300 mm, overall weight: 3,650 kg, input voltage: 400 V, track width: 470 mm, construction width: 2,000 mm, input frequency: 50 Hz, Complete Slicing Line The individual modules form an automated slicing and portioning line, from product infeed to transfer to downstream equipment. The exact configuration of this system is documented by the matching serial numbers CCS/CCW/CCR/CCA 904-7096. Weber CCS 904 Slicer No. CCS 904-7096 Year of manufacture: 07/2007 Plastic infeed belt, 3 x 70 mm belt width Outfeed/string belt, 470 mm wide Approx. 4,900 x 2,000 x 2,300 mm Weber CCW Checkweigher No. CCW 904-7096 Year of manufacture: 07/2007 CCW belt width 470 mm Dimensions approx. 600 x 900 x 1,400 mm Weber CCR Line/Diverter Unit Fodpfxszwk Evj Am Ejgi No. CCR 904-7096 Year of manufacture: 07/2007 Belt width 470 mm Approx. 500 x 900 x 1,400 mm Weber CCA Depositor No. CCA 904-7096 Year of manufacture: 07/2007 Belt width 590 mm Dimensions approx. 8,600 x 1,450 x 1,700 mm Additionally, a pallet with spare parts is included. Inspection is possible at any time after prior arrangement.

Condition: good (used), Year of construction: 2001, Used band saw from MEP Fodpfx Asz Spxcom Eogi Type: Shark 270SC Capacity: 270 x 190 mm Double-sided miter cut capability Automatic lowering/raising and clamping

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Charmilles Robofil 440 CCS Year of manufacture: 2011 Charmilles Millenium control system Travel distances (X / Y / Z): 550 x 350 x 400 mm Travel distances (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed of 340 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.15 mm to 0.33 mm Dimensions of the complete system: 2600 x 2540 x 2240 mm Total weight of the system: 3300 kg Fgodpfxezruvue Am Eei After receiving your order, we will clean and completely overhaul the machine and test all functions. You will receive a 6-month warranty on the machine. We would be happy to offer you the commissioning of the machine.

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Fgedpetva Nhsfx Am Eei Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables.

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Fgedpfx Amoy Txb Te Esi

Condition: ready for operation (used), Heidenhain UVR 140D converter, ID: 390 281-01, serial number: 13857609A – complete overhaul and testing performed by qualified personnel, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Fgjdpfx Aj Ahvg Tjm Eei

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, Technical Description – Cassel Metal Shark® Octa Fsdpfeztl Hyex Am Ejgi Product Description: The Metal Shark Octa is an industrial metal detection system with an octagonal aperture, specifically designed for the reliable detection of metal contaminants in bulk materials or products on conveyor belts or in gravity chutes. It detects ferrous, non-ferrous, and stainless steel particles with high sensitivity. Key Features: Remote monitoring via SHARKNet® software Digital Signal Processing (DSP) for precise and stable detection Octagonal aperture for optimal material flow and detection area High sensitivity – typical detection performance: Ferrous: ≥ 0.8 mm Non-ferrous (e.g., aluminum): ≥ 1.0 mm Stainless steel: ≥ 1.2 mm (depending on the product and size) Automatic calibration and compensation of product effects Touchscreen display with user-friendly, multilingual interface Hygienic stainless steel housing, available in IP65/IP66 Power supply: 100–240 V AC, 50–60 Hz Outputs: Relay, 4–20 mA, digital inputs/outputs, Ethernet, USB Application areas: Food industry, chemical industry, pharmaceuticals, recycling, wood and plastics processing Advantages: Excellent noise suppression Reliable continuous operation 24/7 Easy integration into existing systems Support for HACCP, IFS, BRC, and other QM systems

Condition: used, continuous grilling line suitable for: roasting, cooking or browning electric heating 108 kW 3 x 400 V with lower and upper belt : bottom and top grilling overall dimensions (l x w x h) : ± 5.150 x 1.800 x 2.250 mm net length 2.900 mm belt width 600 mm max 265 degrees gap height adjustable adjustable speed pneumatically controlled belt Fodpfs Aid Rqjx Am Ejgi with belt wash system

Condition: ready for operation (used), Heidenhain UVR 140D inverter, ID: 390 281-01, serial number: 13857609A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Fjdpfxo Ahvhbj Am Esgi Note: In an exchange procedure, your defective exchange part must not have any mechanical damage, such as fractures, as these are no longer repairable. In this case, an additional charge of €700 including VAT will be applied. Attention: You are bidding on a Heidenhain UVR 140D inverter, ID: 390 281-01, serial number: 3857609A, as part of an exchange service. It has been professionally and completely overhauled and tested and comes with a 3-month warranty. It is 100% functional, and the scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €700 including VAT will be issued.

Condition: excellent (used), mileage: 319,930 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, first registration: 10/2012, emission class: euro5, color: yellow, suspension: air, Despite the care taken in entering the data correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Fodpfoz I Ehqox Am Ejgi Tel: Leemans Thierry Tel: Leemans Dino = More information = Year of manufacture: 2012 Front axle: Steerable Rear axle: Dual tires; Suspension: Air suspension Number of cylinders: 6 Engine displacement: 2,987 cc Dimensions (L x W x H): 640 x 205 x 281 cm Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, serial number: 16412040T – complete overhaul and testing performed by qualified personnel, including test report. Comes with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Fjdpfez A N A Ijx Am Eogi

Condition: reconditioned (used), functionality: fully functional, overall weight: 400 kg, USED SEMI-AUTOMATIC SAW WITH PNEUMATIC VISE, MEP SHARK 280, Fedpfjz H Ixpsx Am Eegi

Condition: used, axle configuration: 3 axles, first registration: 06/2006, color: other, Year of construction: 2006 Empty weight: 5.420 kg Axle 1: left 10 mm right 10 mm Fodpj Acg Hdefx Am Eogi Axle 2: left 6 mm right 6 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers!

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000 Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Axle 3: left 8 mm right 8 mm Fjdpfx Amezkk H To Ejgi We have the possibility to stack trailers!

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco CC120A Compact corner crimping machine. Fgsdpfx Asxvnwtjm Esi Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000 Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Fedpfx Ajzi Dnhom Eegi Axle 2: left 6 mm right 6 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: ready for operation (used), Heidenhain UVR 140D, ID: 390 281-01, SN: 16412040T – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In an exchange procedure, your defective exchange part must not have any mechanical damage, such as fractures, as these cannot be repaired. In this case, an additional charge of €700 including VAT will be applied. Fgodpfx Amez A N A Us Eoi Attention: You are bidding on a Heidenhain UVR 140D inverter, ID: 390 281-01, SN: 16412040T, in an exchange service. It has been professionally overhauled and tested, comes with a 3-month warranty, and is 100% functional. The scope of delivery is as shown in the photos. In both repair and exchange procedures, your defective exchange part must not exhibit any mechanical damage such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €700 including VAT will be issued.